LANPLEX-SYSTEMS-MIB-1-2-2
AI MIB Summary
Standard SNMP MIB module defining data structures for LANPLEX-SYSTEMS-MIB-1-2-2.
258
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
258 total| Object Name |
|---|
synernetics OBJECT IDENTIFIER .1.3.6.1.4.1.114 |
RFC1213-MIB Unknown .1.3.6.1.4.1.114 |
lanplex OBJECT IDENTIFIER .1.3.6.1.4.1.114.1 |
lpsProducts OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3 |
lps6000 OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2 |
lps6012 OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.1 |
lps6012System OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.1.1 |
lps6012Chassis OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.1.2 |
lps6012ESM OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.1.3 |
lps6012EFSM OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.1.4 |
lps6012TRSM OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.1.5 |
lps6004 OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.2 |
lps6004System OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.2.1 |
lps6004Chassis OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.2.2 |
lps6004ESM OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.2.3 |
lps6004EFSM OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.2.4 |
lps6004TRSM OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.2.2.5 |
lps2000 OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.3 |
lps2500 OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.3.1 |
lss2200 OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.3.2 |
lps2016 OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.3.3.3 |
lanplexSystemsMib OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4 |
lpsSystemOverTemperatureEventThe trap that is generated when the system temperature
exceeds a certain threshold. TRAP-TYPE .1.3.6.1.4.1.114.1.4.0.1 |
lpsPowerSupplyFailureEventThe trap that is generated when a power supply unit
fails. TRAP-TYPE .1.3.6.1.4.1.114.1.4.0.2 |
lpsChassisSlotOverTemperatureEventThe trap that is generated when the temperature of a
board in a particular slot exceeds a certain threshold. TRAP-TYPE .1.3.6.1.4.1.114.1.4.0.3 |
lpsChassisSlotInsertEventThe trap that is generated when a board is inserted into a
particular slot. TRAP-TYPE .1.3.6.1.4.1.114.1.4.0.4 |
lpsChassisSlotExtractEventThe trap that is generated when a board is extracted
from a particular slot. TRAP-TYPE .1.3.6.1.4.1.114.1.4.0.5 |
lpsBridgeAddressThresholdEventThe trap that is generated when the number of addresses
stored in the bridge reaches lpsBridgeAddressThreshold. TRAP-TYPE .1.3.6.1.4.1.114.1.4.0.6 |
lpsSystemFanFailureEventThe trap that is generated when one of the system fans
fails. TRAP-TYPE .1.3.6.1.4.1.114.1.4.0.7 |
lpsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.1 |
lpsSystemIdThe unique identifier assigned to this system during
manufacturing.ro INTEGER .1.3.6.1.4.1.114.1.4.1.1 |
lpsSystemTypeThe type of system.ro Enumeration .1.3.6.1.4.1.114.1.4.1.2 |
lpsSystemNameThe text string describing this system.rw DisplayString .1.3.6.1.4.1.114.1.4.1.3 |
lpsSystemManufacturerThe text string describing the manufacturer of this
system.ro DisplayString .1.3.6.1.4.1.114.1.4.1.4 |
lpsSystemHardwareRevisionThe revision level of the system, contained in two
octets. The first octet indicates the artwork revision,
and the second octet indicates the rework level.ro OCTET STRING .1.3.6.1.4.1.114.1.4.1.5 |
lpsSystemMemorySizeThe amount of memory (RAM), in bytes, present on the
system processor board.ro INTEGER .1.3.6.1.4.1.114.1.4.1.6 |
lpsSystemFlashMemorySizeThe amount of flash memory, in bytes, present on the
system processor board.ro INTEGER .1.3.6.1.4.1.114.1.4.1.7 |
lpsSystemNvMemorySizeThe amount of non-volatile memory, in bytes, present
on the system processor board.ro INTEGER .1.3.6.1.4.1.114.1.4.1.8 |
lpsSystemSoftwareRevisionThe revision number of the LANplex system software.
Each byte indicates the following:
byte 0: major release number.
byte 1: minor release number.
byte 2: update number.
byte 3:
bits 7-6: release type.
bits 5-0: supplemental identifier.ro OCTET STRING .1.3.6.1.4.1.114.1.4.1.9 |
lpsSystemBuildTimeThe build time of the system software.ro DisplayString .1.3.6.1.4.1.114.1.4.1.10 |
lpsSystemSnmpRevisionThe revision number of the SNMP agent implementation.ro INTEGER .1.3.6.1.4.1.114.1.4.1.11 |
lpsSystemRequestedSnmpModeThis object describes the requested SNMP mode for the
system. The value of this object indicates the mode that
will become effective following a reboot of the system.
Note that only a subset of the above values may be valid
for some systems.rw Enumeration .1.3.6.1.4.1.114.1.4.1.12 |
lpsSystemCurrentSnmpModeThis object describes the currently active SNMP mode for
the system. Note that only a subset of the above values
may be valid for some systems.ro Enumeration .1.3.6.1.4.1.114.1.4.1.13 |
lpsSystemActionThis object, when read, always returns the value
other(1). Setting this object to the value reset(2) causes
a reset of the system. The value other(1) is not a vaild
value for set operations.rw Enumeration .1.3.6.1.4.1.114.1.4.1.14 |
lpsSystemOvertemperatureThis object indicates the current overtemperature
status for the system. If the system does not support
overtemperature detection, this object returns
notSupported.ro Enumeration .1.3.6.1.4.1.114.1.4.1.15 |
lpsSystemFanFailureThis object indicates the current fan status for the
system. If the system does not support fan failure
detection, this object returns notSupported.ro Enumeration .1.3.6.1.4.1.114.1.4.1.16 |
lpsSlot OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.2 |
lpsSlotCountThe count of slots in the chassis.ro INTEGER .1.3.6.1.4.1.114.1.4.2.1 |
lpsSlotTableA list of slot entries. A single entry exists in this
list for each slot in the chassis. SEQUENCE OF LpsSlotEntry .1.3.6.1.4.1.114.1.4.2.2 |
lpsSlotEntryA slot entry contains information about a particular
slot. LpsSlotEntry .1.3.6.1.4.1.114.1.4.2.2.1 |
lpsSlotIndexThe index of the slot identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.2.2.1.1 |
lpsSlotBoardTypeThe type of board residing in the slot identified by
this entry.ro Enumeration .1.3.6.1.4.1.114.1.4.2.2.1.2 |
lpsSlotBoardRevisionThe revision number of the board in the slot identified
by this entry. If the slot is empty, or the revision is
unknown this object returns a zero length string.ro OCTET STRING .1.3.6.1.4.1.114.1.4.2.2.1.3 |
lpsSlotBoardStatusThe status of the board in the slot identified by this
entry.ro Enumeration .1.3.6.1.4.1.114.1.4.2.2.1.4 |
lpsSlotBoardNameThe text string describing the board in the slot
identified by this entry.ro DisplayString .1.3.6.1.4.1.114.1.4.2.2.1.5 |
lpsSlotBoardNameAbbrevThe abbreviation used to describe the board in the slot
identified by this entry.ro DisplayString .1.3.6.1.4.1.114.1.4.2.2.1.6 |
lpsSlotEthernetPortCountThe count of ethernet ports in the slot identified by
this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.2.2.1.7 |
lpsSlotFddiMacCountThe count of FDDI MACs in the slot identified by this
entry.ro INTEGER .1.3.6.1.4.1.114.1.4.2.2.1.8 |
lpsSlotFddiPortCountThe count of FDDI ports in the slot identified by this
entry.ro INTEGER .1.3.6.1.4.1.114.1.4.2.2.1.9 |
lpsSlotOvertemperatureThis object indicates the current overtemperature status
for the slot. If the slot does not support overtemperature
detection, this object returns notSupported.ro Enumeration .1.3.6.1.4.1.114.1.4.2.2.1.10 |
lpsSlotTokenRingPortCountThe count of TokenRing ports in the slot identified by this
entry.ro INTEGER .1.3.6.1.4.1.114.1.4.2.2.1.11 |
lpsControlPanel OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.3 |
lpsControlPanelHardwareRevisionAn 8-bit value specifying the revision level of the
control panel hardware.ro OCTET STRING .1.3.6.1.4.1.114.1.4.3.1 |
lpsControlPanelSoftwareRevisionAn 8-bit value specifying the revision level of the
control panel software.ro OCTET STRING .1.3.6.1.4.1.114.1.4.3.2 |
lpsControlPanelLinesThe number of lines in the control panel display.ro INTEGER .1.3.6.1.4.1.114.1.4.3.3 |
lpsControlPanelColumnsThe number of columns in the control panel display.ro INTEGER .1.3.6.1.4.1.114.1.4.3.4 |
lpsControlPanelTextThe currently displayed text in the control panel
display.ro OCTET STRING .1.3.6.1.4.1.114.1.4.3.5 |
lpsPowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.4 |
lpsPowerSupplyCountThe count of power supplies in the system.ro INTEGER .1.3.6.1.4.1.114.1.4.4.1 |
lpsPowerSupplyStatusTableA list of power supply status entries. SEQUENCE OF LpsPowerSupplyStatusEntry .1.3.6.1.4.1.114.1.4.4.2 |
lpsPowerSupplyStatusEntryA power supply status entry contains information about a
particular power supply. LpsPowerSupplyStatusEntry .1.3.6.1.4.1.114.1.4.4.2.1 |
lpsPowerSupplyStatusIndexThe unique index of the power supply identified by this
entry.ro INTEGER .1.3.6.1.4.1.114.1.4.4.2.1.1 |
lpsPowerSupplyStatusThis object represents the power supply status. The
value is a sum. It initially takes on the value 0, then
for each failure type which is active, 2 raised to a power
is added to the sum. The powers are according to the
following table:
Failure Type Power
AC Failure 0
Plus 5 Failure 1
Plus 12 Failure 2
Over Temperature Failure 3ro INTEGER .1.3.6.1.4.1.114.1.4.4.2.1.2 |
lpsPowerSupplyStatusSupportedThis object represents the various power supply failure
types which are supported. The value is a sum. It
initially takes on the value 0, then for each failure type
which is supported, 2 raised to a power is added to the
sum. The powers are according to the following table:
Failure Type Power
AC Failure 0
Plus 5 Failure 1
Plus 12 Failure 2
Over Temperature Failure 3
This object used in conjunction with the
lpsPowerSupplyStatus object for a given power supply
provide a complete picture of the status of the power
supply.ro INTEGER .1.3.6.1.4.1.114.1.4.4.2.1.3 |
lpsSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.5 |
lpsSnmpAgentIdThe unique id for this SNMP agent within the system.ro INTEGER .1.3.6.1.4.1.114.1.4.5.1 |
lpsSnmpInternalAgentTrapMaskThis value is a bit string that indicates which traps
are enabled for transmit to other agents in the system.
The octet string value is treated as a 64-bit integer
value. The value is a sum. It initially takes on the
value 0, then for each trap which is enabled, 2 raised
to the value of (lpsAgentTrapDescriptionIndex - 1) for
that trap is added to the sum.rw OCTET STRING .1.3.6.1.4.1.114.1.4.5.2 |
lpsSnmpInternalAgentTrapDestinationMaskA value which indicates to which other agents in the
system traps should be sent. The value is a sum. It
initially takes on the value 0, then for each agent which
is to receive traps, 2 raised to the value of
(lpsSnmpAgentId - 1) for that agent is added to the sum.
Note that only traps which are enabled according to the
value of the lpsSnmpInternalAgentTrapMask object will be
forwarded, and that each trap which is forwarded will
be transmitted to each agent identified by this mask.rw INTEGER .1.3.6.1.4.1.114.1.4.5.3 |
lpsSnmpProxyInternalRequestsThis object determines if this agent will proxy requests
to other agents in the system. If the value of this
object is true(1), this agent will proxy requests to other
agents in the chassis.rwdeprecated Enumeration .1.3.6.1.4.1.114.1.4.5.4 |
lpsSnmpInternalProxyRequestMaxAgeThe maximum time, in seconds, an internal proxy request
will remain queued waiting for a response before being
discarded. Note that when the value of
lpsSnmpProxyInternalRequests is false(2), the value of
this object is ignored.rw INTEGER .1.3.6.1.4.1.114.1.4.5.5 |
lpsSnmpProxyInternalTrapsThis object determines if this agent will generate proxy
traps for those traps received from other agents in the
system. If the value of this object is true(1), this
agent will generate proxy traps for those received from
other agents in the chassis. Note that agents will not
proxy traps to other agents within the system to prevent
looping of traps.rwdeprecated Enumeration .1.3.6.1.4.1.114.1.4.5.6 |
lpsSnmpInternalProxyTableA list of SNMP internal agent proxy entries. An entry in
this table exists for each agent in the system that can be
reached by this agent via the internal proxy mechanism. SEQUENCE OF LpsSnmpInternalProxyEntry .1.3.6.1.4.1.114.1.4.5.7 |
lpsSnmpInternalProxyEntryAn entry identifies the communities available for
communicating with another agent in the system via the
internal proxy mechanism. LpsSnmpInternalProxyEntry .1.3.6.1.4.1.114.1.4.5.7.1 |
lpsSnmpInternalProxyAgentIdThe id of the agent identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.5.7.1.1 |
lpsSnmpInternalProxyAccessClassThe access to MIB objects supported by the agent
identified by this entry provided by this agent, when
using the community string identified by the corresponding
value of lpsSnmpInternalProxyCommunity.ro Enumeration .1.3.6.1.4.1.114.1.4.5.7.1.2 |
lpsSnmpInternalProxyCommunityA community which allows access to MIB objects supported
by the agent identified by this entry.ro OCTET STRING .1.3.6.1.4.1.114.1.4.5.7.1.3 |
lpsAgent OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.6 |
lpsAgentRequestMaxAgeThe maximum time, in seconds, a local SNMP request will
remain queued waiting for a response before being
discarded.rw INTEGER .1.3.6.1.4.1.114.1.4.6.1 |
lpsAgentProxyRemoteSmtRequestsThis object determines if this agent will proxy SMT
requests to other FDDI stations. If the value of this
object is true(1), this agent will proxy SMT requests to
other stations. Note that only a subset of the above
values may be valid for some systems.rwdeprecated Enumeration .1.3.6.1.4.1.114.1.4.6.2 |
lpsAgentRemoteSmtProxyRequestMaxAgeThe maximum time, in seconds, an SMT proxy request will
remain queued waiting for a response before being
discarded. Note that when the value of
lpsAgentProxyRemoteSmtRequests is false(2), the value of
this object is ignored.rw INTEGER .1.3.6.1.4.1.114.1.4.6.3 |
lpsAgentProxyRemoteSmtEventsThis object determines if this agent will generate traps
for SMT events occuring at other stations. If the value
of this object is true(1), this agent will generate traps
for all SMT events, those which occur locally, and those
which occur at other stations. If the value of this
object is false(2), this agent will only generate traps
for events which occur locally. Note that only a subset
of the above values may be valid for some systems.rw Enumeration .1.3.6.1.4.1.114.1.4.6.4 |
lpsAgentTrapDescriptionTableThis table contains a listing of trap descriptions for
each trap supported by this agent. This
provides a relationship between a trap index, and the trap
enterprise oid and trap number for a given trap. In all
cases except for the MIB-2 generic traps, the enterprise
under which a trap is defined is the same as that
appearing in the ENTERPRISE portion of the trap. SEQUENCE OF LpsAgentTrapDescriptionTableEntry .1.3.6.1.4.1.114.1.4.6.5 |
lpsAgentTrapDescriptionTableEntryInformation relating a trap index to a specific trap
enterprise oid and trap number. LpsAgentTrapDescriptionTableEntry .1.3.6.1.4.1.114.1.4.6.5.1 |
lpsAgentTrapDescriptionIndexA unique index corresponding to the trap described by
this entry. This value of this object corresponding to
a particular trap will remain constant accross system
resets.ro INTEGER .1.3.6.1.4.1.114.1.4.6.5.1.1 |
lpsAgentTrapEnterpriseThe enterpise under which the trap identified by this
entry is defined.ro OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.6.5.1.2 |
lpsAgentTrapNumberThe number of the trap identified by this entry, within
the enterprise where it is defined.ro INTEGER .1.3.6.1.4.1.114.1.4.6.5.1.3 |
lpsAgentTrapDestinationTableThis table contains information specifying which traps
will be transmitted to a given destination address. The
table is indexed by the destination address type and
destination address. Each entry in the table with a
status of valid identifies a set of traps which, when
generated, will be transmitted to the corresponding
destination address listed in that entry. SEQUENCE OF LpsAgentTrapDestinationTableEntry .1.3.6.1.4.1.114.1.4.6.6 |
lpsAgentTrapDestinationTableEntryInformation relating a set of traps and a destination
address to which each trap in ths set will be transmitted
when it is generated. To create a new entry, set a
non-existent instance of lpsAgentTrapDestinationTrapMask
to a valid value. To remove an entry, set the instance of
lpsAgentTrapDestinationEntryStatus for the entry to
invalid(2). LpsAgentTrapDestinationTableEntry .1.3.6.1.4.1.114.1.4.6.6.1 |
lpsAgentTrapDestinationAddressTypeThe type of address identified by this entry.ro Enumeration .1.3.6.1.4.1.114.1.4.6.6.1.1 |
lpsAgentTrapDestinationAddressThe address, of the type specified by the corresponding
value of lpsAgentTrapDestinationAddressType, to which the
set of traps identified by this entry are to be
transmitted.ro OCTET STRING .1.3.6.1.4.1.114.1.4.6.6.1.2 |
lpsAgentTrapDestinationTrapMaskThis value is a bit string that indicates which traps
are enabled for the address identified by this entry.
The octet string value is treated as a 64-bit value. The
value is a sum. It initially takes on the value 0, then
for each trap which is enabled, 2 raised to the value of
(lpsAgentTrapDescriptionIndex - 1) for that trap is
added to the sum. A new entry in the table is created by
setting the value of this object for a new destination
address type and destination address. Note that an octet
string of all zeros is not a valid value for this object.rw OCTET STRING .1.3.6.1.4.1.114.1.4.6.6.1.3 |
lpsAgentTrapDestinationEntryStatusThe status of the trap destination table entry. Setting
this object to invalid(1) has the effect of removing the
corresponding entry from the table.rw Enumeration .1.3.6.1.4.1.114.1.4.6.6.1.4 |
lpsInterface OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.7 |
lpsInterfaceLocationTableA list of interface location entries. A single entry
exists in this list for each interface managed by this
agent. SEQUENCE OF LpsInterfaceLocationEntry .1.3.6.1.4.1.114.1.4.7.1 |
lpsInterfaceLocationEntryAn interface location entry describes the location of
a particular interface managed by this agent. LpsInterfaceLocationEntry .1.3.6.1.4.1.114.1.4.7.1.1 |
lpsInterfaceLocationIfIndexThe value of the MIB-II ifIndex corresponding to the
interface identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.7.1.1.1 |
lpsInterfaceLocationInterfaceTypeThe type of the physical implementation of the interface
identified by this entry.ro Enumeration .1.3.6.1.4.1.114.1.4.7.1.1.2 |
lpsInterfaceLocationTypeThe type of location where the interface identified
by this entry is physically located.ro Enumeration .1.3.6.1.4.1.114.1.4.7.1.1.3 |
lpsInterfaceLocationTypeIndexThe index of the location identified by the corresponding
instance of lpsInterfaceLocationType where the interface
identified by this entry is physically located.ro INTEGER .1.3.6.1.4.1.114.1.4.7.1.1.4 |
lpsInterfaceLocationLocalIndexThe local index of the interface identified by
this entry relative to its type specified by the
corresponding value of lpsInterfaceLocationInterfaceType,
and the location specified by the corresponding values
of lpsInterfaceLocationType and lpsInterfaceLocationTypeIndex.ro INTEGER .1.3.6.1.4.1.114.1.4.7.1.1.5 |
lpsEthernetPort OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.8 |
lpsEthernetPortCountThe count of ethernet ports managed by this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.8.1 |
lpsEthernetPortTableA list of ethernet port entries. A single entry exists
in this list for each ethernet port managed by this agent. SEQUENCE OF LpsEthernetPortEntry .1.3.6.1.4.1.114.1.4.8.2 |
lpsEthernetPortEntryAn ethernet port entry contains information about a
particular ethernet port managed by this agent. LpsEthernetPortEntry .1.3.6.1.4.1.114.1.4.8.2.1 |
lpsEthernetPortIndexThe index of the ethernet port identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.8.2.1.1 |
lpsEthernetPortIfIndexThe value of the MIB-II ifIndex corresponding to the
ethernet port identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.8.2.1.2 |
lpsEthernetPortLabelAn ASCII text string describing the ethernet port
identified by this entry.rw DisplayString .1.3.6.1.4.1.114.1.4.8.2.1.3 |
lpsEthernetPortLinkStatusThe current value of the link status for the ethernet port
identified by this entry.ro Enumeration .1.3.6.1.4.1.114.1.4.8.2.1.4 |
lpsEthernetPortTypeSpecific port type description for the ethernet port
identified by this entry.ro Enumeration .1.3.6.1.4.1.114.1.4.8.2.1.5 |
lpsEthernetPortRateTableA list of ethernet port rate entries. A single entry
exists in this list for each ethernet port, managed by
this agent, which supports rate information. SEQUENCE OF LpsEthernetPortRateEntry .1.3.6.1.4.1.114.1.4.8.3 |
lpsEthernetPortRateEntryAn ethernet port rate entry contains rate statistics for a
particular ethernet port managed by this agent. Rate
statistics are calculated based on a one second sampling
interval. LpsEthernetPortRateEntry .1.3.6.1.4.1.114.1.4.8.3.1 |
lpsEthernetPortRateIndexThe index of the ethernet port identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.1 |
lpsEthernetPortRateByteReceiveRateThe average number of bytes received per second by the
ethernet port identified by this entry during the most
recent sampling period.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.2 |
lpsEthernetPortRatePeakByteReceiveRateThe peak value of lpsEthernetPortRateByteReceiveRate
since the system was last initialized for the ethernet
port identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.3 |
lpsEthernetPortRateFrameReceiveRateThe average number of frames received per second by the
ethernet port identified by this entry during the most
recent sampling period.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.4 |
lpsEthernetPortRatePeakFrameReceiveRateThe peak value of lpsEthernetPortRateFrameReceiveRate
since the system was last initialized for the ethernet
port identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.5 |
lpsEthernetPortRateByteTransmitRateThe average number of bytes transmitted per second by the
ethernet port identified by this entry during the most
recent sampling period.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.6 |
lpsEthernetPortRatePeakByteTransmitRateThe peak value of lpsEthernetPortRateByteTransmitRate
since the system was last initialized for the ethernet
port identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.7 |
lpsEthernetPortRateFrameTransmitRateThe average number of frames transmitted per second by the
ethernet port identified by this entry during the most
recent sampling period.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.8 |
lpsEthernetPortRatePeakFrameTransmitRateThe peak value of lpsEthernetPortRateFrameTransmitRate
since the system was last initialized for the ethernet
port identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.8.3.1.9 |
lpsSmt OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.9 |
lpsSmtCountThe count of SMTs managed by this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.9.1 |
lpsSmtFddiMacBeaconTableA list of FDDI MAC beacon entries. A single entry exists
in this list for each FDDI MAC, managed by this agent,
which supports MAC beacon history. SEQUENCE OF LpsSmtFddiMacBeaconEntry .1.3.6.1.4.1.114.1.4.9.4 |
lpsSmtFddiMacBeaconEntryAn FDDI MAC beacon entry contains information about a
particular FDDI MAC's beacon history. LpsSmtFddiMacBeaconEntry .1.3.6.1.4.1.114.1.4.9.4.1 |
lpsSmtFddiMacBeaconSmtIndexThe index of the SMT instance identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.9.4.1.1 |
lpsSmtFddiMacBeaconIndexThe index of the FDDI MAC identified by this entry,
within the SMT identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.9.4.1.2 |
lpsSmtFddiMacBeaconHistoryThis object gives a history of the most recent beacon
information received on the FDDI MAC identified by this
entry. It can contain up to a maximum of eight records.
Each record is of the form:
source MAC: 6 bytes
beacon data length: 2 bytes.
beacon data: 0-16 bytes.ro OCTET STRING .1.3.6.1.4.1.114.1.4.9.4.1.3 |
lpsSmtFddiMacRateTableA list of FDDI MAC rate entries. A single entry exists
in this list for each FDDI MAC, managed by this agent,
which supports rate statistics. SEQUENCE OF LpsSmtFddiMacRateEntry .1.3.6.1.4.1.114.1.4.9.5 |
lpsSmtFddiMacRateEntryAn FDDI MAC rate entry contains rate statistics for a
particular FDDI MAC managed by this agent. Rate statistics
are calculated based on a one second sampling interval. LpsSmtFddiMacRateEntry .1.3.6.1.4.1.114.1.4.9.5.1 |
lpsSmtFddiMacRateSmtIndexThe index of the SMT instance identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.1 |
lpsSmtFddiMacRateIndexThe index of the FDDI MAC identified by this entry, within
the SMT identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.2 |
lpsSmtFddiMacRateByteReceiveRateThe average number of bytes received per second by the
FDDI MAC identified by this entry during the most recent
sampling period.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.3 |
lpsSmtFddiMacRatePeakByteReceiveRateThe peak value of lpsSmtFddiMacByteReceiveRate since the
system was last initialized for the FDDI MAC identified by
this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.4 |
lpsSmtFddiMacRateFrameReceiveRateThe average number of frames received per second by the
FDDI MAC identified by this entry during the most recent
sampling period.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.5 |
lpsSmtFddiMacRatePeakFrameReceiveRateThe peak value of lpsSmtFddiMacRateFrameReceiveRate since
the system was last initialized for the FDDI MAC identified
by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.6 |
lpsSmtFddiMacRateByteTransmitRateThe average number of bytes transmitted per second by the
FDDI MAC identified by this entry during the most recent
sampling period.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.7 |
lpsSmtFddiMacRatePeakByteTransmitRateThe peak value of lpsSmtFddiMacByteTransmitRate since the
system was last initialized for the FDDI MAC identified by
this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.8 |
lpsSmtFddiMacRateFrameTransmitRateThe average number of frames transmitted per second by
the FDDI MAC identified by this entry during the most
recent sampling period.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.9 |
lpsSmtFddiMacRatePeakFrameTransmitRateThe peak value of lpsSmtFddiMacFrameTransmitRate since the
system was last initialized for the FDDI MAC identified by
this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.9.5.1.10 |
lpsSmtFddiPortTableA list of FDDI port entries. A single entry exists in
this list for each FDDI port managed by this agent. SEQUENCE OF LpsSmtFddiPortEntry .1.3.6.1.4.1.114.1.4.9.6 |
lpsSmtFddiPortEntryAn FDDI port entry contains information about a particular
FDDI port managed by this agent. LpsSmtFddiPortEntry .1.3.6.1.4.1.114.1.4.9.6.1 |
lpsSmtFddiPortSmtIndexThe index of the SMT instance identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.9.6.1.1 |
lpsSmtFddiPortIndexThe index of the FDDI port identified by this entry,
within the SMT identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.9.6.1.2 |
lpsSmtFddiPortLocationTypeThe type of location where the FDDI port identified by
this entry is physically located.ro Enumeration .1.3.6.1.4.1.114.1.4.9.6.1.3 |
lpsSmtFddiPortLocationTypeIndexThe index of the location identified by the corresponding
instance of lpsSmtFddiPortLocationType where the FDDI port
identified by this entry is physically located.ro INTEGER .1.3.6.1.4.1.114.1.4.9.6.1.4 |
lpsSmtFddiPortLocationLocalIndexThe local index of the FDDI port identified by this
entry relative to the location specified by the
corresponding values of lpsSmtFddiPortLocationType and
lpsSmtFddiPortLocationTypeIndex.ro INTEGER .1.3.6.1.4.1.114.1.4.9.6.1.5 |
lpsSmtFddiPortLabelAn ASCII text string describing the FDDI port identified
by this entry.rw DisplayString .1.3.6.1.4.1.114.1.4.9.6.1.6 |
lpsBridge OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.10 |
lpsBridgeCountThe count of bridges managed by this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.10.1 |
lpsBridgeTableA list of bridge entries. A single entry exists in this
list for each bridge managed by this agent. SEQUENCE OF LpsBridgeEntry .1.3.6.1.4.1.114.1.4.10.2 |
lpsBridgeEntryA bridge entry contains information about a particular
bridge managed by this agent. LpsBridgeEntry .1.3.6.1.4.1.114.1.4.10.2.1 |
lpsBridgeIndexThe index of the bridge identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.10.2.1.1 |
lpsBridgePortCountThe number of bridge ports that the bridge identified by
this entry controls.ro INTEGER .1.3.6.1.4.1.114.1.4.10.2.1.2 |
lpsBridgeAddressTableSizeThe size of the address table for the bridge identified
by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.10.2.1.3 |
lpsBridgeAddressTableCountThe current count of addresses in the address table for
the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.10.2.1.4 |
lpsBridgeAddressTablePeakCountThe peak count of addresses in the address table for the
bridge identified by this entry, since the system was last
initialized.ro INTEGER .1.3.6.1.4.1.114.1.4.10.2.1.5 |
lpsBridgeAddressThresholdA reporting threshold for the total number of addresses
known for the bridge identified by this entry. When this
threshold is reached, the event
lpsBridgeAddressThresholdEvent is generated. The range of
valid values for setting this object is between 1 and the
corresponding value reported by lpsBridgeAddressTableSize
+ 1 (Note that this range applies to values issued in set
requests. The current value may be outside this range,
for example if the corresponding value of lpsBridgeMode is
changed). Setting this object to one greater than the
address table size disables the generation of
lpsBridgeAddressThresholdEvents since the limit will never
be reached.rw INTEGER .1.3.6.1.4.1.114.1.4.10.2.1.6 |
lpsBridgeModeThe operational mode of the bridge identified by this
entry. Note that bridges which report notSupported(3)
will not support sets of this object, and that the value
notSupported(3) is not a valid value for a set operation.rw Enumeration .1.3.6.1.4.1.114.1.4.10.2.1.7 |
lpsBridgeBackbonePortThe number of the port selected as the backbone segment
port when the corresponding value of lpsBridgeMode is
is expressMode(1). The value of this object can range
from 1 to the corresponding value of lpsBridgePortCount,
however, some bridges may support only a subset of ports
as backbone ports. If the corresponding value of
lpsBridgeMode is not expressMode(1), the value of this
object is ignored.rw INTEGER .1.3.6.1.4.1.114.1.4.10.2.1.8 |
lpsBridgeIpFragmentationEnabledA flag indicating whether or not IP fragmentation is
enabled on this bridge. Note that bridges which report
notSupported(3) will not support sets of this object, and
that the value notSupported(3) is not a valid value for a
set operation.rw Enumeration .1.3.6.1.4.1.114.1.4.10.2.1.9 |
lpsBridgeTrFddiTranslationModeThe mode used to describe whether the embedded MAC
addresses are byte-conjugated in order to convert them
from Token Ring format to native FDDI format (and vice
versa), or whether they are left alone (used for traffic
flowing across a FDDI backbone to/from Token Ring end
stations).rw Enumeration .1.3.6.1.4.1.114.1.4.10.2.1.10 |
lpsBridgePortTableA list of bridge port entries. A single entry exists in
this list for each bridge port managed by this agent. SEQUENCE OF LpsBridgePortEntry .1.3.6.1.4.1.114.1.4.10.3 |
lpsBridgePortEntryA bridge port entry contains information about a
particular bridge port managed by this agent. LpsBridgePortEntry .1.3.6.1.4.1.114.1.4.10.3.1 |
lpsBridgePortBridgeIndexThe index of the bridge identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.10.3.1.1 |
lpsBridgePortIndexThe index of the bridge port identified by this entry,
within the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.10.3.1.2 |
lpsBridgePortIfIndexThe value of the MIB-II ifIndex corresponding to the
bridge port identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.10.3.1.3 |
lpsBridgePortReceiveMulticastLimitThe maximum number of multicast frames per second that
can be received in the sample interval. The sample
interval is one second. The default value for this object
is zero which implies an infinite rate.rw INTEGER .1.3.6.1.4.1.114.1.4.10.3.1.4 |
lpsBridgePortAddressActionThis object, when read, always returns the value
other(1). The behavior of setting this object to each of
the acceptable values is as follows:
freezeAddress: causes all the learned dynamic
addresses to be converted into static
addresses.
flushAddress: causes all the addresses to be flushed
from the address list for the bridge
port identified by this entry.
flushDynamicAddress:
causes all dynamic addresses to be
flushed from the address list for the
bridge port identified by this entry.rw Enumeration .1.3.6.1.4.1.114.1.4.10.3.1.5 |
lpsBridgePortSpanningTreeFrameReceivedCountsThe number of spanning tree frames received by the
bridge port identified by this entry.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.6 |
lpsBridgePortReceiveBlockedDiscardsThe number of frames discarded by the bridge port
identified by this entry because the receiving bridge port
was not in the 'forwarding' state.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.7 |
lpsBridgePortReceiveMulticastLimitExceededsThe number of times the value of
lpsBridgePortReceiveMulticastLimit was exceeded for the
port identified by this entry.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.8 |
lpsBridgePortReceiveMulticastLimitExceededDiscardsThe number of multicast/broadcast frames discarded by the
bridge port identified by this entry because the
corresponding value of lpsBridgePortReceiveMulticastLimit
was exceeded.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.9 |
lpsBridgePortReceiveSecurityDiscardsThe number of frames discarded by the bridge port
identified by this entry because they contained source
addresses which were statically configured on another
bridge port. A statically configured address (station),
which is not allowed to move, appears to have moved.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.10 |
lpsBridgePortReceiveUnknownDiscardsThe number of frames discarded by the bridge port
identified by this entry because the destination address
was unknown. Note that this counter is only valid for
backbone ports, and only when the bridge is operating in
express mode.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.11 |
lpsBridgePortReceiveOtherDiscardsThe number of frames discarded by the bridge port
identified by this entry because they contained either
invalid (group) source addresses or source addresses
belonging to this bridge (indicative of network loops).ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.12 |
lpsBridgePortReceiveErrorDiscardsThe number of frames discarded by the bridge port
identified by this entry because of internal bridge system
errors (e.g., hardware and software address table
discrepencies).ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.13 |
lpsBridgePortSameSegmentDiscardsThe number of frames discarded by the bridge port
identified by this entry because the destination address
is known on the same network segment as the source address,
i.e., the frame does not need to be bridged.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.14 |
lpsBridgePortTransmitBlockedDiscardsThe number of frames discarded by the bridge port
identified by this entry because the transmitting bridge
port was not in the 'forwarding' state.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.15 |
lpsBridgePortReceiveAllPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to user defined receive all
path filters.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.16 |
lpsBridgePortReceiveMulticastPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to user defined receive
multicast path filters.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.17 |
lpsBridgePortTransmitAllPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to user defined transmit all
path filters.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.18 |
lpsBridgePortTransmitMulticastPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to user defined transmit
multicast path filters.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.19 |
lpsBridgePortForwardedUnicastFramesThe number of unicast frames which this port forwarded
to a single destination port.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.20 |
lpsBridgePortForwardedUnicastOctetsThe number of octets contained in unicast frames
which this port forwarded to a single destination port.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.21 |
lpsBridgePortForwardedMulticastFramesThe number of multicast frames which this port forwarded.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.22 |
lpsBridgePortForwardedMulticastOctetsThe number of octets contained in multicast frames which
this port forwarded.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.23 |
lpsBridgePortFloodedUnicastFramesThe number of unicast frames which this port flooded to
all other ports in the bridge.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.24 |
lpsBridgePortFloodedUnicastOctetsThe number of octets contained in unicast frames which
this port flooded to all other ports in the bridge.ro Counter .1.3.6.1.4.1.114.1.4.10.3.1.25 |
lpsBridgePortPairTableA list of bridge port pair statistics information. A
single entry exists in this list for each bridge port pair
combination within each bridge managed by this agent. SEQUENCE OF LpsBridgePortPairEntry .1.3.6.1.4.1.114.1.4.10.4 |
lpsBridgePortPairEntryA bridge port pair entry contains statistics information
for a port pair within the same bridge. The port paring
consists of a receiving port indicated by the value of
lpsBridgePortPairReceivePortIndex, and a destination port
indicated by the corresponding value of
lpsBridgePortPairDestinationPortIndex. The corresponding
value of lpsBridgePortPairBridgeIndex is the index of the
bridge containing the port pair. Note that no entries
exist which are indexed with the same values for both
lpsBridgePortPairReceivePortIndex and
lpsBridgePortPairToDestinationPortIndex. LpsBridgePortPairEntry .1.3.6.1.4.1.114.1.4.10.4.1 |
lpsBridgePortPairBridgeIndexThe index of the bridge identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.10.4.1.1 |
lpsBridgePortPairReceivePortIndexThe index of the receiving bridge port identified by this
entry, within the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.10.4.1.2 |
lpsBridgePortPairDestinationPortIndexThe index of the destination bridge port identified by
this entry, within the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.10.4.1.3 |
lpsBridgePortPairForwardedToUnicastFramesThe number of unicast frames forwarded from the receiving
bridge port identified by this entry to the destination
bridge port identified by this entry. Note that this count
only includes frames which were uniquely forwarded to the
destination port, frames which were flooded are not included.ro Counter .1.3.6.1.4.1.114.1.4.10.4.1.4 |
lpsBridgePortPairForwardedToUnicastOctetsThe number of octets contained in unicast frames forwarded
from the receiving bridge port identified by this entry to
the destination bridge port identified by this entry. Note
that this count only includes frames which were uniquely
forwarded to the destination port, frames which were flooded
are not included.ro Counter .1.3.6.1.4.1.114.1.4.10.4.1.5 |
lpsBridgePortAddressTableA list of bridge port address information. A single
entry exists in this list for each learned address,
accross all bridge ports and all bridges managed by this
agent. SEQUENCE OF LpsBridgePortAddressEntry .1.3.6.1.4.1.114.1.4.10.5 |
lpsBridgePortAddressEntryAn bridge port address entry contains information about a
particular bridge port address. To create a new entry,
set an instance of lpsBridgePortAddressRemoteAddress with
the address index portion of the instance set to 0, to a
valid value. To remove an entry, set the instance of the
lpsBridgePortAddressType for the entry to invalid(2). LpsBridgePortAddressEntry .1.3.6.1.4.1.114.1.4.10.5.1 |
lpsBridgePortAddressBridgeIndexThe index of the bridge identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.10.5.1.1 |
lpsBridgePortAddressPortIndexThe index of the bridge port identified by this entry,
within the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.10.5.1.2 |
lpsBridgePortAddressIndexThe index of this address entry within the bridge address
table for the bridge identified by this entry. This index
ranges from 1 to the corresponding value of
lpsBridgeAddressTableSize.ro INTEGER .1.3.6.1.4.1.114.1.4.10.5.1.3 |
lpsBridgePortAddressRemoteAddressThe remote MAC address detected on the bridge port
identified by to this entry. Setting this object results
in an attempt to create a new entry in the table. Since
the value of lpsBridgePortAddressIndex is determined
automatically internal to the bridge, a set is only
successful if the index value specified for
lpsBridgePortAddressIndex is zero. A get-next
using the values of lpsBridgePortAddressTypeIndex and
lpsBridgePortAddressPortIndex can be used to determine the
address index assigned to the newly added address entry.rw OCTET STRING .1.3.6.1.4.1.114.1.4.10.5.1.4 |
lpsBridgePortAddressTypeThis object, when read, always returns the value valid(1).
Setting this object to invalid(2) will remove the
corresponding address entry from the table.rw Enumeration .1.3.6.1.4.1.114.1.4.10.5.1.5 |
lpsBridgePortAddressIsStaticA value indicating whether this MAC address was
statically configured or was dynamically learned. Note
that isStatic(1) it the only valid for set operations.rw Enumeration .1.3.6.1.4.1.114.1.4.10.5.1.6 |
lpsBridgePortAddressStaticPortIf the corresponding value of the object
lpsBridgePortAddressIsStatic is isStatic(1), this object
indicates the local bridge port index (as reported by
lpsBridgePortLocalIndex) for which this address MAC was
statically configured. If the object
lpsBridgePortAddressIsStatic has the value isDynamic(2),
the value of this object is 0.ro INTEGER .1.3.6.1.4.1.114.1.4.10.5.1.7 |
lpsBridgePortAddressAgeThis object indicates the time, in seconds, elapsed since
a packet containing this address as a source was last seen
on the bridge port identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.10.5.1.8 |
lpsIpRouter OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.11 |
lpsNetworkMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.12 |
lpsNetworkAnalyzerTableA list of analyzer entries. A single entry exists in this
list for each bridge port configured for an analyzer. SEQUENCE OF LpsNetworkAnalyzerTableEntry .1.3.6.1.4.1.114.1.4.12.1 |
lpsNetworkAnalyzerTableEntryAn analyzer table entry contains information relating an
analyzer port address to the bridge and port index for that
analyzer.
The effect of creating an entry for a particular port is
to configure that port for monitoring. A port which is
configured for monitoring is no longer available for
switching. To create an entry, set the value of the
lpsNetworkAnalyzerStatus object for a non-existent instance
to valid(1). The value of the lpsNetworkAnalyzerPhysicalAddress
object for the new entry is filled in as a result of the
creation.
The effect of removing an entry for a particular port is to
disable the port for monitoring. The port is then available
for switching. To remove an entry, set the value of the
corresponding instance of the lpsNetworkAnalyzerStatus object
to invalid(2). LpsNetworkAnalyzerTableEntry .1.3.6.1.4.1.114.1.4.12.1.1 |
lpsNetworkAnalyzerBridgeIndexThe index of the bridge relative to this agent where the
analyzer identified by this entry is configured.ro INTEGER .1.3.6.1.4.1.114.1.4.12.1.1.1 |
lpsNetworkAnalyzerBridgePortIndexThe index of the port relative to the bridge identified by
this entry where the analyzer identified by this entry is
configured.ro INTEGER .1.3.6.1.4.1.114.1.4.12.1.1.2 |
lpsNetworkAnalyzerPhysicalAddressThe physical address of the bridge port identified by the
corresponding values of lpsNetworkAnalyzerBridgeIndex and
lpsNetworkAnayzerBridgePortIndex.ro OCTET STRING .1.3.6.1.4.1.114.1.4.12.1.1.3 |
lpsNetworkAnalyzerStatusThe status of the entry. Setting the value of a non-existent
instance of this object to valid(1) attempts to add the
corresponding entry to the table. The effect of adding an
entry to the table is to configure the port for monitoring and
to disable it for switching. Setting an existing instance of
this object to invalid(2) attempts to remove the corresponding
entry from the table. The effect of removing an entry from
the table is to disable the port for monitoring and to make
available for switching.rw Enumeration .1.3.6.1.4.1.114.1.4.12.1.1.4 |
lpsNetworkPortMonitorTableA list of monitor port entries. A single entry exists in
this for each bridge port being monitored. SEQUENCE OF LpsNetworkPortMonitorTableEntry .1.3.6.1.4.1.114.1.4.12.2 |
lpsNetworkPortMonitorTableEntryA port monitor table entry contains information relating a
bridge port being monitored with the address of the analyzer
which is being used to monitor the port.
The effect of creating an entry for a particular port is to
enable monitoring of that port by the analyzer specified. To
create an entry, set the value of the
lpsNetworkPortMonitorAnalyzerAddress object to the address of
the network analyzer port. This value should be the same as
the value of the lpsNetworkAnalyzerPhysicalAddress object for
the analyzer.
The effect of removing an entry for a particular port is to
disable monitoring of that port. To remove an entry, set the
value of the corresponding instance of the
lpsNetworkPortMonitorStatus object to invalid(2). LpsNetworkPortMonitorTableEntry .1.3.6.1.4.1.114.1.4.12.2.1 |
lpsNetworkPortMonitorBridgeIndexThe index of the bridge relative to this agent where the
monitored port identified by this entry is located.ro INTEGER .1.3.6.1.4.1.114.1.4.12.2.1.1 |
lpsNetworkPortMonitorBridgePortIndexThe index of the port which is being monitored relative to
the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.12.2.1.2 |
lpsNetworkPortMonitorAnalyzerAddressThe physical address of the port where the analyzer,
which is monitoring the port identified by this entry, is
located. Setting the value of a non-existent instance of
this object attempts to add an entry to the table. The effect
of adding an entry to the table is to enable monitoring of the
port by the analyzer specified. Setting the value of an
existing instance of this object will switch the monitored
port to the new analyzer address.rw OCTET STRING .1.3.6.1.4.1.114.1.4.12.2.1.3 |
lpsNetworkPortMonitorStatusThe status of the entry. Setting an existing instance
of this object to invalid(2) attempts to remove the
corresponding entry from the table. The effect of removing
an entry from the table is to disable monitoring of the
port.rw Enumeration .1.3.6.1.4.1.114.1.4.12.2.1.4 |
lpsTokenRingPort OBJECT IDENTIFIER .1.3.6.1.4.1.114.1.4.13 |
lpsTokenRingPortCountThe count of token ring ports managed by this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.13.1 |
lpsTokenRingPortTableA list of token ring port entries. A single entry exists
in this list for each token ring port managed by this agent. SEQUENCE OF LpsTokenRingPortEntry .1.3.6.1.4.1.114.1.4.13.2 |
lpsTokenRingPortEntryA token ring port entry contains information about a
particular token ring port managed by this agent. LpsTokenRingPortEntry .1.3.6.1.4.1.114.1.4.13.2.1 |
lpsTokenRingPortIndexThe index of the token ring port identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.114.1.4.13.2.1.1 |
lpsTokenRingPortIfIndexThe value of the MIB-II ifIndex corresponding to the
token ring port identified by this entry.ro INTEGER .1.3.6.1.4.1.114.1.4.13.2.1.2 |
lpsTokenRingPortLabelAn ASCII text string describing the token ring port
identified by this entry.rw DisplayString .1.3.6.1.4.1.114.1.4.13.2.1.3 |
lpsTokenRingPortInsertStatusThe current value of the link status for the token ring port
identified by this entry.ro Enumeration .1.3.6.1.4.1.114.1.4.13.2.1.4 |
lpsTokenRingPortTypeSpecific port type description for the token ring port
identified by this entry.ro Enumeration .1.3.6.1.4.1.114.1.4.13.2.1.5 |
lpsTokenRingPortModeThe current mode of the port. The default mode (station) is
used to connect a hub to the port. Lobe mode is used to direct
connect a Token Ring station into the port. This selection
can only be made on ports 1 and 2 of the module.rw Enumeration .1.3.6.1.4.1.114.1.4.13.2.1.6 |
lpsTokenRingPortSpeedThe current speed of the port. The default speed is
sixteenMegabit.rw Enumeration .1.3.6.1.4.1.114.1.4.13.2.1.7 |
lpsTokenRingPortLineErrorsThis counter is incremented when a frame
or token is copied or repeated by a
station, the E bit is zero in the frame
or token and one of the following
conditions exists: 1) there is a
non-data bit (J or K bit) between the SD
and the ED of the frame or token, or
2) there is an FCS error in the frame.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.8 |
lpsTokenRingPortBurstErrorsThis counter is incremented when a station
detects the absence of transitions for five
half-bit timers (burst-five error).ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.9 |
lpsTokenRingPortACErrorsThis counter is incremented when a station
receives an AMP or SMP frame in which A is
equal to C is equal to 0, and then receives
another SMP frame with A is equal to C is
equal to 0 without first receiving an AMP
frame. It denotes a station that cannot set
the AC bits properly.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.10 |
lpsTokenRingPortAbortTransErrorsThis counter is incremented when a station
transmits an abort delimiter while
transmitting.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.11 |
lpsTokenRingPortInternalErrorsThis counter is incremented when a station
recognizes an internal error.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.12 |
lpsTokenRingPortLostFrameErrorsThis counter is incremented when a station
is transmitting and its TRR timer expires.
This condition denotes a condition where a
transmitting station in strip mode does not
receive the trailer of the frame before the
TRR timer goes off.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.13 |
lpsTokenRingPortReceiveCongestionErrorsThis counter is incremented when a station
recognizes a frame addressed to its
specific address, but has no available
buffer space indicating that the station
is congested.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.14 |
lpsTokenRingPortFrameCopiedErrorsThis counter is incremented when a station
recognizes a frame addressed to its
specific address and detects that the FS
field A bits are set to 1 indicating a
possible line hit or duplicate address.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.15 |
lpsTokenRingPortTokenErrorsThis counter is incremented when a station
acting as the active monitor recognizes an
error condition that needs a token
transmitted.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.16 |
lpsTokenRingPortSoftErrorsThe number of Soft Errors the interface
has detected. It directly corresponds to
the number of Report Error MAC frames
that this interface has transmitted.
Soft Errors are those which are
recoverable by the MAC layer protocols.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.17 |
lpsTokenRingPortHardErrorsThe number of times this interface has
detected an immediately recoverable
fatal error. It denotes the number of
times this interface is either
transmitting or receiving beacon MAC
frames.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.18 |
lpsTokenRingPortSignalLossThe number of times this interface has
detected the loss of signal condition from
the ring.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.19 |
lpsTokenRingPortTransmitBeaconsThe number of times this interface has
transmitted a beacon frame.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.20 |
lpsTokenRingPortRecoveriesThe number of Claim Token MAC frames
received or transmitted after the interface
has received a Ring Purge MAC frame. This
counter signifies the number of times the
ring has been purged and is being recovered
back into a normal operating state.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.21 |
lpsTokenRingPortLobeWiresThe number of times the interface has
detected an open or short circuit in the
lobe data path. The adapter will be closed
when this condition occurs.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.22 |
lpsTokenRingPortRemovesThe number of times the interface has
received a Remove Ring Station MAC frame
request. When this frame is received
the interface will enter the close state.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.23 |
lpsTokenRingPortSinglesThe number of times the interface has
sensed that it is the only station on the
ring. This will happen if the interface
is the first one up on a ring, or if
there is a hardware problem.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.24 |
lpsTokenRingPortFreqErrorsThe number of times the interface has
detected that the frequency of the
incoming signal differs from the expected
frequency.ro Counter .1.3.6.1.4.1.114.1.4.13.2.1.25 |