LANOPTICS-SYSTEM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for LANOPTICS-SYSTEM-MIB.
52
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
lanOptics OBJECT IDENTIFIER .1.3.6.1.4.1.224 |
IMPORTS Unknown .1.3.6.1.4.1.224 |
lanOpticsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.224.2 |
snSysDirectoryGives the agent directory content
(make DOS DIR command on agent directory).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.224.2.1 |
snAgentVersionGives the agent major version in the high order word
and the minor version in low order word.ro INTEGER .1.3.6.1.4.1.224.2.2 |
lanOpticsSystemCMOS OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3 |
lanOpticsSystemCMOSIp OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3.1 |
snSysCMOSIpInterfaceTableA list of network interfaces. SEQUENCE OF SnSysCMOSIpInterfaceEntry .1.3.6.1.4.1.224.2.3.1.1 |
snSysCMOSIpInterfaceEntryAn interface entry containing the Ipaddress and net-mask. SnSysCMOSIpInterfaceEntry .1.3.6.1.4.1.224.2.3.1.1.1 |
snSysCMOSIpIpAddrGives the interface's IpAddressrw IpAddress .1.3.6.1.4.1.224.2.3.1.1.1.1 |
snSysCMOSIpNetMaskGives the interfaces's netmaskrw IpAddress .1.3.6.1.4.1.224.2.3.1.1.1.2 |
snSysCMOSIpDefGwGives the agent's default gateway.rw IpAddress .1.3.6.1.4.1.224.2.3.1.2 |
snSysCMOSIpTFTPOpGives the TFTP policy:
1 - No TFTP, 2 - Optional, 3 - Alwaysrw Enumeration .1.3.6.1.4.1.224.2.3.1.3 |
snSysCMOSIpTFTPAddrGives the TFTP server Ip address.rw IpAddress .1.3.6.1.4.1.224.2.3.1.4 |
snSysCMOSIpTFTPFileNameGives the boot file name at the server (full path).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.224.2.3.1.5 |
snSysCMOSIpTFTPDriveGives the TFTP operation destination drive
(value of ASCII character).rw Enumeration .1.3.6.1.4.1.224.2.3.1.6 |
lanOpticsSystemCMOSHub OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3.2 |
snSysCMOSHubSlotConfigTableA list of slots entries. Each entry in this table,
contains the last 20 operations performed on the slot. SEQUENCE OF SnSysCMOSHubSlotConfigEntry .1.3.6.1.4.1.224.2.3.2.1 |
snSysCMOSHubSlotConfigEntry SnSysCMOSHubSlotConfigEntry .1.3.6.1.4.1.224.2.3.2.1.1 |
snSysSlotLastOperationsA description of last 20 operations performed,
on the slotrw OCTET STRING .1.3.6.1.4.1.224.2.3.2.1.1.1 |
snSysResetSlotQueueResets the last 20 operations queue.rw INTEGER .1.3.6.1.4.1.224.2.3.2.1.1.2 |
snSysCMOSHubSaveHubFunctionsSave (2) /Do not Save (1) Hub managment functions in
non-volatile memory.rw Enumeration .1.3.6.1.4.1.224.2.3.2.2 |
lanOpticsSystemCMOSRPL OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3.3 |
snSysCMOSRPLModeDetermine if the image will be loaded
through RPL at next boot: RPL off - 1, RPL on - 2.rw Enumeration .1.3.6.1.4.1.224.2.3.3.1 |
snSysCMOSFlashModeDetermine if the image will be loaded
from flash memory at next boot :
flash on - 2, flash off - 1.rw Enumeration .1.3.6.1.4.1.224.2.3.3.2 |
lanOpticsSystemCMOSSerial OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3.4 |
snSysCMOSSerialModeDetermine the serial port usage mode :
Proprietary - 1, SLIP - 2, None - 3.rw Enumeration .1.3.6.1.4.1.224.2.3.4.1 |
snSysCMOSSerialComSelectDetermine which COM port is used.rw Enumeration .1.3.6.1.4.1.224.2.3.4.2 |
snSysCMOSSerialBaudRateDetermine the serial port baud rate :
1200 - 1, 2400 - 2, 4800 - 3, 9600 - 4,
19200 - 5, 38300 - 6, 57600 - 7rw Enumeration .1.3.6.1.4.1.224.2.3.4.3 |
snSysCMOSSerialWordLengthDetermine the data bits length : 7 Bits - 1, 8 Bits -2rw Enumeration .1.3.6.1.4.1.224.2.3.4.4 |
snSysCMOSSerialStopBitsDetermine the number of stop bits;
values allowed : 1 Bit - 1, 1.5 Bits - 2, 2 Bits - 3.rw Enumeration .1.3.6.1.4.1.224.2.3.4.5 |
snSysCMOSSerialParityCheckDetermine the parity check policy :
Even - 1, Odd - 2, None - 3.rw Enumeration .1.3.6.1.4.1.224.2.3.4.6 |
lanOpticsSystemCMOSSRAM OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3.5 |
snSysCMOSSRAMKeepAliveSecIntervalDetermine the interval of the keep alive frame in secondsrw INTEGER .1.3.6.1.4.1.224.2.3.5.1 |
lanOpticsSystemCMOSSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3.6 |
snSysCMOSSNMPCommunitiesNumKeeps the number of communities.ro INTEGER .1.3.6.1.4.1.224.2.3.6.1 |
snSysCMOSSNMPTrapManagersNumKeeps the number of managers that traps are send to.ro INTEGER .1.3.6.1.4.1.224.2.3.6.2 |
snSysCMOSSNMPCommunitiesTableA table containing the SNMP communities SEQUENCE OF SnSysCMOSSNMPCommunitiesEntry .1.3.6.1.4.1.224.2.3.6.3 |
snSysCMOSSNMPCommunitiesEntryAn entry community info SnSysCMOSSNMPCommunitiesEntry .1.3.6.1.4.1.224.2.3.6.3.1 |
snSysCMOSSNMPCommunityNameThis variable will give the community name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.224.2.3.6.3.1.1 |
snSysCMOSSNMPCommunityPrivsThis variable will give the community privilages:
Read Only - 1, Read/Write - 2.rw Enumeration .1.3.6.1.4.1.224.2.3.6.3.1.2 |
snSysCMOSSNMPTrapCommunitiesTableA table containing the SNMP communities SEQUENCE OF SnSysCMOSSNMPTrapCommunitiesEntry .1.3.6.1.4.1.224.2.3.6.4 |
snSysCMOSSNMPTrapCommunitiesEntryAn entry of trap IP destinations. SnSysCMOSSNMPTrapCommunitiesEntry .1.3.6.1.4.1.224.2.3.6.4.1 |
snSysCMOSSNMPTrapCommunityIpAddrThis variable gives a manager IP address for traps destination.rw IpAddress .1.3.6.1.4.1.224.2.3.6.4.1.1 |
lanOpticsSystemCMOSACCESS OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3.7 |
snSysCMOSACCESSOffsetGives the offset in the CMOS array.
For internal use onlyrw INTEGER .1.3.6.1.4.1.224.2.3.7.1 |
snSysCMOSACCESSLengthGives the length (max 512) in the CMOS array.
For internal use only,rw INTEGER .1.3.6.1.4.1.224.2.3.7.2 |
snSysCMOSACCESSSequenceGives a sequnce of bytes from CMOS array.
For internal use onlyrw INTEGER .1.3.6.1.4.1.224.2.3.7.3 |
lanOpticsSystemCMOSBRDG OBJECT IDENTIFIER .1.3.6.1.4.1.224.2.3.8 |
snSysCMOSBRDGradiusSets the discovery radius.
Value = 0-7. 0=disable bridge.rw INTEGER .1.3.6.1.4.1.224.2.3.8.1 |
snSysCMOSBRDGlinkNumberSets the Link number.
Value = 0-3.rw INTEGER .1.3.6.1.4.1.224.2.3.8.2 |
snSysCMOSBRDGpasswordSets the bridge password.
8 characters .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.224.2.3.8.3 |