LANOPTICS-RING-MANAGER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for LANOPTICS-RING-MANAGER-MIB.
81
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
81 total| Object Name |
|---|
lanOptics OBJECT IDENTIFIER .1.3.6.1.4.1.224 |
IMPORTS Unknown .1.3.6.1.4.1.224 |
lanOpticsDot5Monitor OBJECT IDENTIFIER .1.3.6.1.4.1.224.5 |
rmServerReportingToThis gives the IP address for the reporting manager.ro IpAddress .1.3.6.1.4.1.224.5.1 |
rmRingStatusThis variable indicates the curent ring status.ro Enumeration .1.3.6.1.4.1.224.5.2 |
rmServerHealthTextThis variable describes the status of the ring
server in a textural manner.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.224.5.3 |
rmServerHealthThis variable will describe the status of the ring
server.ro Enumeration .1.3.6.1.4.1.224.5.4 |
rmRingEventInLogThe number of events currently in the internal
event log.ro INTEGER .1.3.6.1.4.1.224.5.5 |
rmRingEventTableA table containing the last events.
The detailed structure is TBD. SEQUENCE OF RmRingEventEntry .1.3.6.1.4.1.224.5.6 |
rmRingEventEntryAn entry containing one event.
The index into the table is the event number (32 bits int),
where each byte represented by an index digit. RmRingEventEntry .1.3.6.1.4.1.224.5.6.1 |
rmRingEventThis variable will give the data structure
describing a ring event in an internal formatro OCTET STRING .1.3.6.1.4.1.224.5.6.1.1 |
rmRingBeaconingStatusThis variable will give the data structure
describing the beaconing state of the ring.ro OCTET STRING .1.3.6.1.4.1.224.5.7 |
rmRingIsoErrorStatusThis variable will give the data structure
describing the isolating error state of the ring.ro OCTET STRING .1.3.6.1.4.1.224.5.8 |
rmRingSingleStationStatusThis variable will give the data structure
describing the single station state of the ring.ro OCTET STRING .1.3.6.1.4.1.224.5.9 |
rmRingFullConfigurationThis variable gives the ring configuration as
known to the server. Each MAC address is represented by 6
bytes. The direction is up-stream.ro RING-CONFIGURATION .1.3.6.1.4.1.224.5.10 |
rmRingConfigurationUpdateThis variable will give a sequence of changes in the
ring configuration for the monitored ring.ro RING-CONFIGURATION .1.3.6.1.4.1.224.5.11 |
rmServerInitProcessThis variable will initialize the server (reset the
management module).rw INTEGER .1.3.6.1.4.1.224.5.12 |
rmServerAdminStateThis variable will indicate administrative status
of the server.
IDLE - 0
The bit # (LSB = 0):
REM - bit 0 on
CRS - bit 1 on
RPS - bit 2 on
LBS - bit 3 onrw BITMAP .1.3.6.1.4.1.224.5.13 |
rmServerOperatingStateThis variable will indicate operating status of
the server:
IDLE - all 0
The bit # (LSB = 0):
REM - bit 0 on
CRS - bit 1 on
RPS - bit 2 on
LBS - bit 3 onro BITMAP .1.3.6.1.4.1.224.5.14 |
rmServerAdminParametersThe required bit per event disabled/enabled.
The bit # (LSB = 0):
Nullevent(0),
Nodenoresponseevent(1),
Pollprocessfailevent(2),
Criticnodejoinedringevent(3),
Noderemovedevent(4),
Activemonitorerrorevent(5),
Newactivemonitorevent(6),
Naunchangeevent(7),
Claimtokenevent(8),
Ringpurgeevent(9),
Activemonitorpresentevent(10),
Standbymonitorpresentevent(11),
Softerrorreportevent(12),
Ringstatusevent(13),
Congestthresholdexccededevent(14),
Congestthresholdendedevent(15),
Nonisolatingthresholdexccededevent(16),
Impendthresholdexccededevent(17),
Excessivethresholdexcededevent(18),
Errorratedecayevent(19),
Adaptererrorevent(20),
Responseevent(21),
Pollprocessevent(22),
Beaconevent(23),
Nodeleftringevent(24),
Nodejoinedringevent(25),
Criticnodeleftringevent(26)rw BITMAP .1.3.6.1.4.1.224.5.15 |
rmServerOperatingParametersThe required bit per event disabled/enabled.
The bit # (LSB = 0):
Nullevent(0),
Nodenoresponseevent(1),
Pollprocessfailevent(2),
Criticnodejoinedringevent(3),
Noderemovedevent(4),
Activemonitorerrorevent(5),
Newactivemonitorevent(6),
Naunchangeevent(7),
Claimtokenevent(8),
Ringpurgeevent(9),
Activemonitorpresentevent(10),
Standbymonitorpresentevent(11),
Softerrorreportevent(12),
Ringstatusevent(13),
Congestthresholdexccededevent(14),
Congestthresholdendedevent(15),
Nonisolatingthresholdexccededevent(16),
Impendthresholdexccededevent(17),
Excessivethresholdexcededevent(18),
Errorratedecayevent(19),
Adaptererrorevent(20),
Responseevent(21),
Pollprocessevent(22),
Beaconevent(23),
Nodeleftringevent(24),
Nodejoinedringevent(25),
Criticnodeleftringevent(26)ro BITMAP .1.3.6.1.4.1.224.5.16 |
rmDeviceStatusTableA table containing device parameters and
configuration. SEQUENCE OF RmDeviceEntry .1.3.6.1.4.1.224.5.17 |
rmDeviceEntryAn entry containing device parameters and
configuration.
The index to the table is the MAC address of
the device. RmDeviceEntry .1.3.6.1.4.1.224.5.17.1 |
rmDeviceMacAddressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.224.5.17.1.1 |
rmDeviceUpstreamro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.224.5.17.1.2 |
rmDeviceAdminStateThe required state of the adapter.
- only removed is supported.rw Enumeration .1.3.6.1.4.1.224.5.17.1.3 |
rmDeviceOperateStateThe operating state of the adapter.ro Enumeration .1.3.6.1.4.1.224.5.17.1.4 |
rmDevicePhysLocationro INTEGER .1.3.6.1.4.1.224.5.17.1.5 |
rmDeviceGroupAddressro INTEGER .1.3.6.1.4.1.224.5.17.1.6 |
rmDeviceFunctionAddressro INTEGER .1.3.6.1.4.1.224.5.17.1.7 |
rmDeviceProductIDro OCTET STRING .1.3.6.1.4.1.224.5.17.1.8 |
rmDeviceStationIDro INTEGER .1.3.6.1.4.1.224.5.17.1.9 |
rmDeviceStationStatusro OCTET STRING .1.3.6.1.4.1.224.5.17.1.10 |
rmDeviceFunctionClassro INTEGER .1.3.6.1.4.1.224.5.17.1.11 |
rmDeviceAccessPriorityro INTEGER .1.3.6.1.4.1.224.5.17.1.12 |
rmDeviceMicroLevelro OCTET STRING .1.3.6.1.4.1.224.5.17.1.13 |
rmDeviceMonitoredro INTEGER .1.3.6.1.4.1.224.5.17.1.14 |
rmDeviceDaysAllowedro INTEGER .1.3.6.1.4.1.224.5.17.1.15 |
rmDeviceHoursAllowedro INTEGER .1.3.6.1.4.1.224.5.17.1.16 |
rmRingPollProcessStatusThis variable will give the data structure
describing the poll process status of the ring.ro OCTET STRING .1.3.6.1.4.1.224.5.18 |
rmRingNumberThis variable will give the local ring number.ro INTEGER .1.3.6.1.4.1.224.5.35 |
rmRingSoftErrorTimerThis variable will give the ring soft
error timer (in units of 10 milliseconds).ro INTEGER .1.3.6.1.4.1.224.5.36 |
rmRingIsolatingTabThis variable will give the ring isolating table.ro OCTET STRING .1.3.6.1.4.1.224.5.37 |
rmRingCongestTabThis variable will give the ring congestion table.ro OCTET STRING .1.3.6.1.4.1.224.5.38 |
rmRingNonIsolatingTabThis variable will give the ring non isolating
table.ro OCTET STRING .1.3.6.1.4.1.224.5.39 |
rmRingAutoRemoveThis variable will enable/disable auto removal of
a node when the isolating threshold is exceeded or
the congestion threshold is exceeded.rw INTEGER .1.3.6.1.4.1.224.5.42 |
rmRingAllowedDaysPartition1This variable is the first partition in the
days time exis.
The partitions define ranges in units of
days in which some device are allowed
to enter the ring and some are not.rw INTEGER .1.3.6.1.4.1.224.5.43 |
rmRingAllowedDaysPartition2This variable is the second partition in the
days time exis.
The partitions define ranges in units of
days in which some devices
are allowed to enter the ring and some are not.
The value should be higher than Partition1rw INTEGER .1.3.6.1.4.1.224.5.44 |
rmRingAllowedHoursPartition1This variable is the first partition in the
hours time exis.
The partitions define ranges in units of
hours (1-24 hours) in which some devices
are allowed to enter the ring and some are not.rw INTEGER .1.3.6.1.4.1.224.5.45 |
rmRingAllowedHoursPartition2This variable is the second partition in the
hours time exis.
The partitions define ranges in units of
hours (1-24 hours) in which some devices
are allowed to enter the ring and some are not.
The value should be higher than Partition1.rw INTEGER .1.3.6.1.4.1.224.5.46 |
rmServerPowerOnThis variable indicates if the server is powered
on since the last poll.rw INTEGER .1.3.6.1.4.1.224.5.47 |
rmTRLastErrorClassThis var contains the error class of the last
Token-Ring error reported by the agent.ro Enumeration .1.3.6.1.4.1.224.5.48 |
rmTRLastErrorTypeThis var contains the error type of the last
Token-Ring error, depending on the error classro INTEGER .1.3.6.1.4.1.224.5.49 |
rmTRFaultDomainNode1This var contains the MAC address of the first
node in the last error fault domain.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.224.5.50 |
rmTRFaultDomainNode2This var contains the MAC address of the second
node in the last error fault domain.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.224.5.51 |
rmIsoTresholdExceededCountThis var counts the total number that Isloating Treshold
has been exceeded (exessive error status of the ring)
since the agent is up or reset.ro Counter .1.3.6.1.4.1.224.5.52 |
rmNonIsoTresholdExceededCountThis var counts the total number that Non Isloating Treshold
has been exceeded since the agent is up.ro Counter .1.3.6.1.4.1.224.5.53 |
rmCongestionTresholdExceededCountThis var counts the total number that Congestion Treshold
has been exceeded since the agent is up.ro Counter .1.3.6.1.4.1.224.5.54 |
rmBeaconCounterThis var counts the total number of Beacons
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.55 |
rmSpareCounterSpare Counter for future usero Counter .1.3.6.1.4.1.224.5.56 |
rmPurgeCounterThis var counts the total number of ring Purges
since the agent is up.ro Counter .1.3.6.1.4.1.224.5.57 |
rmClaimCounterThis var counts the total number of Token Claims
since the agent is up.ro Counter .1.3.6.1.4.1.224.5.58 |
rmAdapterResetCounterThis var counts the total number of times the agent adapter
has to reset itself since the agent is up.ro Counter .1.3.6.1.4.1.224.5.59 |
rmLostFramesCounterThis var counts the total number of Lost Frames events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.60 |
rmCongestionCounterThis var counts the total number of Congestion events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.61 |
rmFrameCopyCounterThis var counts the total number of Frame Copy events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.62 |
rmFrequencyErrorCounterThis var counts the total number of Frequency Error events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.63 |
rmTokenCounterThis var counts the total number of Token error events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.64 |
rmLineCounterThis var counts the total number of Line error events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.65 |
rmInternalCounterThis var counts the total number of Internal error events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.66 |
rmBurstCounterThis var counts the total number of Burst error events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.67 |
rmARIFCICounterThis var counts the total number of ARI/FCI events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.68 |
rmAbortCounterThis var counts the total number of Abort events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.69 |
rmPollFailCounterThis var counts the total number of Poll Failed events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.70 |
rmNoResponseCounterThis var counts the total number of No Response events
for the whole ring since the agent is up.ro Counter .1.3.6.1.4.1.224.5.71 |
rmWholeRingCountersThis var counts a list of all the above counters (52-71) for
convenience. Each counter occupies 32 bits of this
structure in the order of the related variables.
For internal use only.ro OCTET STRING .1.3.6.1.4.1.224.5.72 |
rmResetOldDevicesSetupThis var resets existing agent setup for all devices, e.g:
monitored, not-allowed, etc.rw INTEGER .1.3.6.1.4.1.224.5.73 |
rmResetErrorCountersThis var resets existing agent error counters.rw INTEGER .1.3.6.1.4.1.224.5.74 |
rmSetCurrentTimeThis var sets the current time (for security settings).
The time is the number of seconds elapsed since midnight,
December 31, 1899.rw INTEGER .1.3.6.1.4.1.224.5.75 |
rmRingFirstSplitConfigurationThis variable will give the first part of the ring
configuration upto 256 bytes including header
(for agents with limited buffer for a single octet).
Retrieving this variable and several 'nexts'
enables to compose the whole ring configuration.ro RING-CONFIGURATION .1.3.6.1.4.1.224.5.76 |
rmRingNextSplitConfigurationThis variable will give the next part of the ring configuration
relating to rmRingFirstSplitConfiguration or previous variable
of this type. Upto 256 bytes are given
(for agents with limited buffer for a single octet).
See previous variable for more details.ro RING-CONFIGURATION .1.3.6.1.4.1.224.5.77 |