JWAC-MIB
AI MIB Summary
JWAC-MIB provides SNMP management access to Juniper Wireless Access Controller (JWAC) hardware, enabling the monitoring of wireless client session states, radio interface statistics, and access point operational status. This proprietary enterprise MIB facilitates the collection of performance metrics and configuration data specific to Juniper's wireless LAN infrastructure.
The structure of JWAC management for the proprietary enterprise.
Main OID:
swJWACMIB.dlink-common-mgmt.39
91
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
91 total| Object Name |
|---|
swJWACMIBThe structure of JWAC management for the
proprietary enterprise. MODULE-IDENTITY .dlink-common-mgmt.39 |
swJWACCtrl OBJECT IDENTIFIER .dlink-common-mgmt.39.1 |
swJWACStateThis object enables/disables the JWAC function.
JWAC and WAC are mutually exclusive functions. That is, they
can not be enabled at the same time.
Using the JWAC function, PC users need to pass two stages
of authentication. The first stage is to do the
authentication with the quarantine server and the second
stage is the authentication with the switch. For the
second stage, the authentication is similar to WAC, except
that there is no port VLAN membership change by JWAC after
a host passes authentication. The RADIUS server will share
the server configuration defined by the 1X command set.rw Enumeration .dlink-common-mgmt.39.1.1 |
swJWACRedirectStateThis object enables/disables the JWAC redirect function.
When the redirect quarantine_server is enabled, the
unauthenticated host will be redirected to the quarantine server
when it tries to access a random URL. When the redirect
jwac_login_page is enabled, the unauthenticated host will be
redirected to the jwac_login_page in the Switch to finish
authentication.
When redirect is disabled, only access to the quarantine_server
and the jwac_login_page from the unauthenticated host are allowed,
all other web access will be denied.
NOTE: When enabling redirect to the quarantine_server, a
quarantine_server must be configured first.rw Enumeration .dlink-common-mgmt.39.1.2 |
swJWACForcibleLogoutStateThis object enables/disables the JWAC forcible_logout function.
When forcible_logout is enabled, a PING packet from an
authenticated host to the JWAC Switch with TTL=1 will be
regarded as a logout request, and the host will move back
to the unauthenticated state.rw Enumeration .dlink-common-mgmt.39.1.3 |
swJWACUDPFilteringStateThis object enables/disables the JWAC udp_filtering function.
When udp_filtering is enabled, all UDP and ICMP packets except
DHCP and DNS packets from unauthenticated hosts will be dropped.rw Enumeration .dlink-common-mgmt.39.1.4 |
swJWACQuarantineServerMonitorStateThis object enables/disables the JWAC Quarantine Server
monitor function.
When enabled, the JWAC Switch will monitor the Quarantine
Server to ensure the server is okay. If the Switch detects no
Quarantine Server, it will redirect all unauthenticated HTTP
access attempts to the JWAC Login Page forcibly if the redirect
is enabled and the redirect destination is configured to be a
Quarantine Server.rw Enumeration .dlink-common-mgmt.39.1.5 |
swJWACQuarantineServerErrorTimeOutUsed to set the Quarantine Server error timeout.
When the Quarantine Server monitor is enabled, the JWAC Switch will
periodically check if the Quarantine works okay. If the Switch
does not receive any response from the Quarantine Server during the
configured error timeout, the Switch then regards it as not
working properly.rw INTEGER .dlink-common-mgmt.39.1.6 |
swJWACRedirectDestinationSpecifies the destination before an unauthenticated host is
redirected to the Quarantine Server or JWAC login web page.rw Enumeration .dlink-common-mgmt.39.1.7 |
swJWACRedirectDelayTimeSpecifies the delay time before an unauthenticated host is
redirected to the Quarantine Server or JWAC login web page.
The unit of delay-time is seconds.
0 means no delay in the redirect.rw INTEGER .dlink-common-mgmt.39.1.8 |
swJWACVirtualIpAddrSpecifies the JWAC virtual IP address which is used to accept
authentication requests from an unauthenticated host.
The virtual IP of JWAC is used to accept authentication requests
from an unauthenticated host. Only requests sent to this IP will
get a correct response.
NOTE: This IP does not respond to ARP requests or ICMP packets.rw IpAddress .dlink-common-mgmt.39.1.9 |
swJWACQuarantineServerURLSpecifies the JWAC Quarantine Server URL.
If the redirect is enabled and the redirect destination is the
Quarantine Server, when an unauthenticated host sends the HTTP
request packets to a random WEB server, the Switch will handle
this HTTP packet and send back a message to the host to allow it
access to the Quarantine Server with the configured URL.
When the PC is connected to the specified URL, the quarantine server
will request the PC user to input the user name and password to
complete the authentication process.rw DisplayString .dlink-common-mgmt.39.1.10 |
swJWACSwitchHttpPortNumberSpecifies the TCP port which the JWAC Switch listens to and uses
to finish the authenticating process.rw INTEGER .dlink-common-mgmt.39.1.11 |
swJWACSwitchHttpProtocolSpecifies the protocol JWAC will run on this TCP port.rw Enumeration .dlink-common-mgmt.39.1.12 |
swJWACRadiusProtocolSpecifies the RADIUS protocol used by JWAC to complete a RADIUS
authentication.rw Enumeration .dlink-common-mgmt.39.1.13 |
swJWACUpdateServerTableA table that contains the JWAC Update Server information.obsolete SEQUENCE OF SwJWACUpdateServerEntry .dlink-common-mgmt.39.1.14 |
swJWACUpdateServerEntryA list of JWAC Update Server information.obsolete SwJWACUpdateServerEntry .dlink-common-mgmt.39.1.14.1 |
swJWACUpdateServerIpAddrSpecifies the IP address.roobsolete IpAddress .dlink-common-mgmt.39.1.14.1.1 |
swJWACUpdateServerMaskSpecifies the IP net mask.roobsolete IpAddress .dlink-common-mgmt.39.1.14.1.2 |
swJWACUpdateServerStatusThe status of this entry.rwobsolete RowStatus (SNMPv2-TC) .dlink-common-mgmt.39.1.14.1.3 |
swJWACAuthenticatePageThis lets an administrator decide which authentication page
to use.
japanese: Choose the Japanese page;
english: Choose the English page.rw Enumeration .dlink-common-mgmt.39.1.15 |
swJWACAuthFailOverStateThis object enables/disables the web-based authentication auth-failover status
of the device. When the authentication failover is enabled,
if the RADIUS server's authentication is unreachable, the local database will be used for
authentication.rw Enumeration .dlink-common-mgmt.39.1.16 |
swJWACRadiusAuthorizeStateUsed to enable or disable the acceptance of an authorized configuration. When the authorization is
enabled for the JWAC RADIUS, the authorized data assigned by the RADUIS server will be accepted
if the global authorization network is enabled.rw Enumeration .dlink-common-mgmt.39.1.17 |
swJWACLocalAuthorizeStateUsed to enable or disable the acceptance of an authorized configuration. When the authorization is
enabled for the JWAC local, the authorized data assigned by the local database will be accepted.rw Enumeration .dlink-common-mgmt.39.1.18 |
swJWACUpdateSVRTableA table that contains JWAC Update Server information. SEQUENCE OF SwJWACUpdateSVREntry .dlink-common-mgmt.39.1.19 |
swJWACUpdateSVREntryA list of JWAC Update Server information. SwJWACUpdateSVREntry .dlink-common-mgmt.39.1.19.1 |
swJWACUpdateSVRIpAddrSpecifies the IP address.ro IpAddress .dlink-common-mgmt.39.1.19.1.1 |
swJWACUpdateSVRMaskSpecifies the IP net mask.ro IpAddress .dlink-common-mgmt.39.1.19.1.2 |
swJWACUpdateSVRProtocolSpecifies the protocol.ro Enumeration .dlink-common-mgmt.39.1.19.1.3 |
swJWACUpdateSVRPortSpecifies the port, 0 denotes all ports.ro INTEGER .dlink-common-mgmt.39.1.19.1.4 |
swJWACUpdateSVRStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.39.1.19.1.5 |
swJWACUpdateSVRStateSpecifies the update server ACL state.ro Enumeration .dlink-common-mgmt.39.1.19.1.6 |
swJWACVirtualIpURLUsed to set the URL for virtual IPrw DisplayString .dlink-common-mgmt.39.1.20 |
swJWACInfo OBJECT IDENTIFIER .dlink-common-mgmt.39.2 |
swJWACPortMgmt OBJECT IDENTIFIER .dlink-common-mgmt.39.3 |
swJWACPortTableA table that contains JWAC port information. SEQUENCE OF SwJWACPortEntry .dlink-common-mgmt.39.3.1 |
swJWACPortEntryA list containing JWAC port information. SwJWACPortEntry .dlink-common-mgmt.39.3.1.1 |
swJWACPortIndexSpecifies the JWAC port number.ro INTEGER .dlink-common-mgmt.39.3.1.1.1 |
swJWACPortStateSpecifies the JWAC port state.rw Enumeration .dlink-common-mgmt.39.3.1.1.2 |
swJWACPortMaxAuthHostSpecifies the maximum number of host process authentication
attempts allowed on each port at the same time.
The value range is (0..N), the value of N is project dependent.rw INTEGER .dlink-common-mgmt.39.3.1.1.3 |
swJWACPortAgeingTimeSpecifies the time period during which an authenticated
host will remain in the authenticated state.
0 indicates the authenticated host will never age out on
the port.rw INTEGER .dlink-common-mgmt.39.3.1.1.4 |
swJWACPortIdleTimeSpecifies the idle-time.
If there is no traffic during idle-time, the host will be
moved back to the unauthenticated state.
0 indicates the idle state of the
authenticated host on the port will never be checked.rw INTEGER .dlink-common-mgmt.39.3.1.1.5 |
swJWACPortBlockTimeSpecifies the block-time.
If a host fails to pass authentication, it will be blocked
for a period specified by the block-time.rw INTEGER .dlink-common-mgmt.39.3.1.1.6 |
swJWACPortAuthModeSpecifies the authentication mode on the special port. The default mode is host based.rw Enumeration .dlink-common-mgmt.39.3.1.1.7 |
swJWACMgmt OBJECT IDENTIFIER .dlink-common-mgmt.39.4 |
swJWACHostTableA table that contains JWAC client host information. SEQUENCE OF SwJWACHostEntry .dlink-common-mgmt.39.4.1 |
swJWACHostEntryA list containing JWAC client host information. SwJWACHostEntry .dlink-common-mgmt.39.4.1.1 |
swJWACHostPortSpecifies the JWAC host port number.ro INTEGER .dlink-common-mgmt.39.4.1.1.1 |
swJWACHostAuthStatusSpecifies the JWAC host authentication state.ro Enumeration .dlink-common-mgmt.39.4.1.1.2 |
swJWACHostMACAddrSpecifies the JWAC host MAC address.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.39.4.1.1.3 |
swJWACHostVIDSpecifies the JWAC host VID.ro VlanId .dlink-common-mgmt.39.4.1.1.4 |
swJWACHostRemainAgeTimeSpecifies the remaining JWAC host agetime.
0 indicates the authenticated host on
the port will never age out.ro INTEGER .dlink-common-mgmt.39.4.1.1.5 |
swJWACHostIdleTimeSpecifies the JWAC host idle time.
0 indicates the idle state of the
authenticated host on the port will never be checked.ro INTEGER .dlink-common-mgmt.39.4.1.1.6 |
swJWACHostBlockTimeSpecifies the JWAC host block time.ro INTEGER .dlink-common-mgmt.39.4.1.1.7 |
swJWACHostStatusSpecifies the status of the JWAC host.
Setting delete (2) will delete this JWAC host entry.rw Enumeration .dlink-common-mgmt.39.4.1.1.8 |
swJWACHostPrioritySpecifies the JWAC host priority assigned when passing authentication.
-1 indicates the host has no priority.ro INTEGER .dlink-common-mgmt.39.4.1.1.9 |
swJWACHostUserNameSpecifies the user name who started the authentication process.ro DisplayString (SNMPv2-TC) .dlink-common-mgmt.39.4.1.1.10 |
swJWACHostIPSpecifies the IP address of the JWAC host, which started the
authentication process.ro IpAddress .dlink-common-mgmt.39.4.1.1.11 |
swJWACPageElementTableA table that contains JWAC authentication page information. SEQUENCE OF SwJWACPageElementEntry .dlink-common-mgmt.39.4.2 |
swJWACPageElementEntryA list containing JWAC authenticate page information.
This allows an administrator to customize the authenticate page. SwJWACPageElementEntry .dlink-common-mgmt.39.4.2.1 |
swJWACPageElementPageSpecifies the JWAC authenticate page.ro Enumeration .dlink-common-mgmt.39.4.2.1.1 |
swJWACPageElementPageTitleSpecifies the JWAC page title of the authenticate page.rw DisplayString .dlink-common-mgmt.39.4.2.1.2 |
swJWACPageElementLoginWindowTitleSpecifies the JWAC login window title mapping of the
authenticate page.rw DisplayString .dlink-common-mgmt.39.4.2.1.3 |
swJWACPageElementUserNameSpecifies the JWAC user name mapping of the
authenticate page.rw DisplayString .dlink-common-mgmt.39.4.2.1.4 |
swJWACPageElementPassWordSpecifies the remaining JWAC password mapping of the
authenticate page.rw DisplayString .dlink-common-mgmt.39.4.2.1.5 |
swJWACPageElementLogoutWindowTitleSpecifies the JWAC logout window title mapping of the
authenticate page.rw DisplayString .dlink-common-mgmt.39.4.2.1.6 |
swJWACPageElementNotificationLine1Used to set the notification information of line 1
in web page after successful authentication.rw DisplayString .dlink-common-mgmt.39.4.2.1.7 |
swJWACPageElementNotificationLine2Used to set the notification information of line 2
in web page after successful authentication.rw DisplayString .dlink-common-mgmt.39.4.2.1.8 |
swJWACPageElementNotificationLine3Used to set the notification information of line 3
in web page after successful authentication.rw DisplayString .dlink-common-mgmt.39.4.2.1.9 |
swJWACPageElementNotificationLine4Used to set the notification information of line 4
in web page after successful authentication.rw DisplayString .dlink-common-mgmt.39.4.2.1.10 |
swJWACPageElementNotificationLine5Used to set the notification information of line 5
in web page after successful authentication.rw DisplayString .dlink-common-mgmt.39.4.2.1.11 |
swJWACWebAuthUserTableA table that contains web-based authentication account info. SEQUENCE OF SwJWACWebAuthUserEntry .dlink-common-mgmt.39.4.3 |
swJWACWebAuthUserEntryA list that contains web-based authentication account info. SwJWACWebAuthUserEntry .dlink-common-mgmt.39.4.3.1 |
swJWACWebAuthUserNameIndexThis object indicates the username (maximum number of
characters is 15).ro DisplayString .dlink-common-mgmt.39.4.3.1.1 |
swJWACWebAuthUserPWDThis object indicates the password (maximum number of
characters is 15) for this user account. It is write-only.rw DisplayString .dlink-common-mgmt.39.4.3.1.2 |
swJWACWebAuthUserVIDThis object indicates the VID for this user account.rw VlanId .dlink-common-mgmt.39.4.3.1.3 |
swJWACWebAuthUserStatusThis object manages this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.39.4.3.1.4 |
swJWACAuthStateTableThis table contains JWAC client host information. SEQUENCE OF SwJWACAuthStateEntry .dlink-common-mgmt.39.4.4 |
swJWACAuthStateEntryThis list contains JWAC client host information. SwJWACAuthStateEntry .dlink-common-mgmt.39.4.4.1 |
swJWACAuthStatePortSpecifies the JWAC host port number. INTEGER .dlink-common-mgmt.39.4.4.1.1 |
swJWACAuthStateOriginalVidSpecifies the JWAC host original receive VLAN-ID. VlanId .dlink-common-mgmt.39.4.4.1.2 |
swJWACAuthStateMACAddrSpecifies the JWAC host MAC address. MacAddress (SNMPv2-TC) .dlink-common-mgmt.39.4.4.1.3 |
swJWACAuthStateAuthStatusSpecifies the JWAC host authentication state.ro Enumeration .dlink-common-mgmt.39.4.4.1.5 |
swJWACAuthStateAssignVidSpecifies the JWAC host assign VID.ro VlanId .dlink-common-mgmt.39.4.4.1.7 |
swJWACAuthStateAssignPrioritySpecifies the JWAC host priority assigned when pass authentication.
-1 indicates the host has no priority assigned.ro INTEGER .dlink-common-mgmt.39.4.4.1.8 |
swJWACAuthStateRemainTimeSpecifies the remaining JWAC host aging time/ block time.
When host's authentication state is 'authenticated' in swJWACAuthStateAuthStatus,
this object indicates the host's aging time, the units is minutes.
When host's authentication state is 'blocked' in swJWACAuthStateAuthStatus,
this object indicates the host's block time, the units is seconds.
0 indicates the authenticated host on the port will never age out.ro INTEGER UNITS "minutes/seconds" .dlink-common-mgmt.39.4.4.1.12 |
swJWACAuthStateIdleTimeSpecifies the JWAC host idle time in seconds.
0 indicates the idle state of the
authenticated host on the port will never be checked.ro INTEGER UNITS "seconds" .dlink-common-mgmt.39.4.4.1.14 |
swJWACAuthStateUserNameSpecifies the user name who starts the authentication process.ro DisplayString (SNMPv2-TC) .dlink-common-mgmt.39.4.4.1.18 |
swJWACAuthStateIPSpecifies the IP address of the JWAC host, which starts the
authentication process.ro IpAddress .dlink-common-mgmt.39.4.4.1.20 |
swJWACAuthStateDelActionUsed to delete the specified authentication entry.
Setting delete(2) will delete this JWAC host entry.rw Enumeration .dlink-common-mgmt.39.4.4.1.30 |
swJWACNotify OBJECT IDENTIFIER .dlink-common-mgmt.39.5 |