JUNIPER-VPN-MIB
Updated Oct 15, 2010Extended VPN MIB module to support VPN Identifier for locally switched L2 circuits.
Main OID:
jnxVpnMIB.1.3.6.1.4.1.2636.3.26
80
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
80 total| Object Name |
|---|
jnxVpnMIBExtended VPN MIB module to support VPN Identifier for locally switched
L2 circuits. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.26 |
jnxVpnMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.26.0 |
jnxVpnIfUpA jnxVpnIfUp notification is generated when the interface
with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName
of type jnxVpnIfVpnType transitions out of the 'down' state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.26.0.1 |
jnxVpnIfDownA jnxVpnIfDown notification is generated when the interface
with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName
of type jnxVpnIfVpnType transitions to the 'down' state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.26.0.2 |
jnxVpnPwUpA jnxVpnPwUp notification is generated when the Pseudo-Wire
with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName
of type jnxVpnPwVpnType transitions out of the 'down' state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.26.0.3 |
jnxVpnPwDownA jnxVpnPwDown notification is generated when the Pseudo-Wire
with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName
of type jnxVpnPwVpnType transitions to the 'down' state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.26.0.4 |
jnxVpnMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.26.1 |
jnxVpnInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.26.1.1 |
jnxVpnConfiguredVpnsNumber of configured VPNs.ro Gauge32 .1.3.6.1.4.1.2636.3.26.1.1.1 |
jnxVpnActiveVpnsNumber of active VPNs.ro Gauge32 .1.3.6.1.4.1.2636.3.26.1.1.2 |
jnxVpnNextIfIndexNext free VPN interface index.ro Unsigned32 .1.3.6.1.4.1.2636.3.26.1.1.3 |
jnxVpnNextPwIndexNext free Pseudo-Wire index.ro Unsigned32 .1.3.6.1.4.1.2636.3.26.1.1.4 |
jnxVpnNextRTIndexNext free Route Target index.ro Unsigned32 .1.3.6.1.4.1.2636.3.26.1.1.5 |
jnxVpnTableTable of Configured VPNs. SEQUENCE OF JnxVpnEntry .1.3.6.1.4.1.2636.3.26.1.2 |
jnxVpnEntryEntry containing information about a particular VPN. JnxVpnEntry .1.3.6.1.4.1.2636.3.26.1.2.1 |
jnxVpnTypeType of the VPN. JnxVpnType .1.3.6.1.4.1.2636.3.26.1.2.1.1 |
jnxVpnNameName of the VPN. This should ideally be unique in the
Service Provider's domain; at a minimum, it MUST be
unique per Provider Edge router. JnxVpnName .1.3.6.1.4.1.2636.3.26.1.2.1.2 |
jnxVpnRowStatusThis variable is used to create, modify, and/or delete a
row in this table.ro RowStatus -- .1.3.6.1.4.1.2636.3.26.1.2.1.3 |
jnxVpnStorageTypeThis variable indicates the storage type for this object.ro StorageType -- .1.3.6.1.4.1.2636.3.26.1.2.1.4 |
jnxVpnDescriptionString describing the VPN.ro SnmpAdminString -- .1.3.6.1.4.1.2636.3.26.1.2.1.5 |
jnxVpnIdentifierTypeType of the following JnxVpnIdentifier.ro JnxVpnIdentifierType -- .1.3.6.1.4.1.2636.3.26.1.2.1.6 |
jnxVpnIdentifierIn the case of BGP VPNs, this is the Route Distinguisher
for the VPN. In the case of LDP VPNs, this is the VC ID
for the circuit. A value of all zeros indicates that the
neither a Route Distinguisher nor a VC ID is configured
for the VPN.ro JnxVpnIdentifier -- .1.3.6.1.4.1.2636.3.26.1.2.1.7 |
jnxVpnConfiguredSitesThe number of sites configured in the VPN. Must be set
to zero if not applicable.ro Gauge32 .1.3.6.1.4.1.2636.3.26.1.2.1.8 |
jnxVpnActiveSitesThe number of active sites (i.e., sites whose state is
active) in the VPN.ro Gauge32 .1.3.6.1.4.1.2636.3.26.1.2.1.9 |
jnxVpnLocalAddressesThe number of addresses learned from the CE device.ro Gauge32 .1.3.6.1.4.1.2636.3.26.1.2.1.10 |
jnxVpnTotalAddressesThe total number of addresses in the VPN RIB.ro Gauge32 .1.3.6.1.4.1.2636.3.26.1.2.1.11 |
jnxVpnAgeThe age (i.e., time from creation till now) of this
VPN in hundredths of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.26.1.2.1.12 |
jnxVpnIfTableTable of VPN Interfaces. SEQUENCE OF JnxVpnIfEntry .1.3.6.1.4.1.2636.3.26.1.3 |
jnxVpnIfEntryEntry containing information about a particular VPN
interface. JnxVpnIfEntry .1.3.6.1.4.1.2636.3.26.1.3.1 |
jnxVpnIfVpnTypeType of the VPN to which this interface belongs.ro JnxVpnType .1.3.6.1.4.1.2636.3.26.1.3.1.1 |
jnxVpnIfVpnNameName of the VPN to which this interface belongs.ro JnxVpnName .1.3.6.1.4.1.2636.3.26.1.3.1.2 |
jnxVpnIfIndexThe index of this interface in the VPN. Each interface
in the VPN is given a unique index. The RowStatus says
whether a given interface (i.e., a row in this table)
is valid or not. Note: this index MUST NOT be zero.ro Unsigned32 .1.3.6.1.4.1.2636.3.26.1.3.1.3 |
jnxVpnIfRowStatusThis variable is used to create, modify, and/or delete a
row in this table.ro RowStatus -- .1.3.6.1.4.1.2636.3.26.1.3.1.4 |
jnxVpnIfStorageTypeThis variable indicates the storage type for this object.ro StorageType -- .1.3.6.1.4.1.2636.3.26.1.3.1.5 |
jnxVpnIfAssociatedPwIndex of associated Pseudo-wire, if any, in which case
the index MUST be non-zero. If none, then this index
MUST be zero.ro Unsigned32 -- .1.3.6.1.4.1.2636.3.26.1.3.1.6 |
jnxVpnIfProtocolProtocol running over this VPN interface. The values up to
10 are taken from draft-martini-l2circuit-trans-mpls-08.txt;
the value for vpls is taken from
draft-lasserre-vkompella-ppvpn-vpls-01.txt. The values
from 20-23 are used when the VPN is a Layer 3 VPN.ro Enumeration .1.3.6.1.4.1.2636.3.26.1.3.1.7 |
jnxVpnIfInBandwidthMaximum bandwidth that the CE connected over this VPN i/f
can send to the PE, in Kilo (i.e., 1000) Bytes per second.
A value of zero means there is no configured maximum.ro Unsigned32 -- .1.3.6.1.4.1.2636.3.26.1.3.1.8 |
jnxVpnIfOutBandwidthMaximum bandwidth that the PE can send to the CE over this
VPN interface, in Kilo (i.e., 1000) Bytes per second. A
value of zero means there is no configured maximum.ro Unsigned32 -- .1.3.6.1.4.1.2636.3.26.1.3.1.9 |
jnxVpnIfStatusStatus of this interface.ro Enumeration .1.3.6.1.4.1.2636.3.26.1.3.1.10 |
jnxVpnPwTableTable of Pseudo-Wire Connections. SEQUENCE OF JnxVpnPwEntry .1.3.6.1.4.1.2636.3.26.1.4 |
jnxVpnPwEntryEntry containing information about a particular VPN. JnxVpnPwEntry .1.3.6.1.4.1.2636.3.26.1.4.1 |
jnxVpnPwVpnTypeThe type of the VPN to which this Pseudo-Wire belongs.ro JnxVpnType .1.3.6.1.4.1.2636.3.26.1.4.1.1 |
jnxVpnPwVpnNameThe name of the VPN to which this Pseudo-Wire belongs.ro JnxVpnName .1.3.6.1.4.1.2636.3.26.1.4.1.2 |
jnxVpnPwIndexThe index of this Pseudo-Wire in the VPN. Each Pseudo
Wire in the VPN is given a unique index. The RowStatus
says whether a given Pseudo Wire (i.e., a row in this
table) is valid or not. Note: this index MUST NOT be zero.ro Unsigned32 .1.3.6.1.4.1.2636.3.26.1.4.1.3 |
jnxVpnPwRowStatusThis variable is used to create, modify, and/or delete a
row in this table.ro RowStatus -- .1.3.6.1.4.1.2636.3.26.1.4.1.4 |
jnxVpnPwStorageTypeThis variable indicates the storage type for this object.ro StorageType -- .1.3.6.1.4.1.2636.3.26.1.4.1.5 |
jnxVpnPwAssociatedInterfaceThe VPN index of the interface associated with this Pseudo
Wire, if any. If there is no interface associated with
this Pseudo Wire, a value of zero is to be returned.ro Unsigned32 -- .1.3.6.1.4.1.2636.3.26.1.4.1.6 |
jnxVpnPwLocalSiteIdThe local site identifier for this Pseudo-Wire. If there
is no local site identifier, a value of zero is to be
returned.ro Unsigned32 -- .1.3.6.1.4.1.2636.3.26.1.4.1.7 |
jnxVpnPwRemoteSiteIdThe remote site (i.e., the site at the other end of this
Pseudo-Wire) identifier. If there is no remote site
identifier, a value of zero is to be returned.ro Unsigned32 -- .1.3.6.1.4.1.2636.3.26.1.4.1.8 |
jnxVpnRemotePeIdAddrTypeThe type of address assigned to the remote PE.ro InetAddressType -- .1.3.6.1.4.1.2636.3.26.1.4.1.9 |
jnxVpnRemotePeIdAddressThe address of the remote PE, i.e., the router at the
other end of the Pseudo-Wire.ro InetAddress -- .1.3.6.1.4.1.2636.3.26.1.4.1.10 |
jnxVpnPwTunnelTypeThe type of the tunnel over which the Pseudo-Wire is
carried. If several Pseudo-Wires can be carried in one
tunnel, each Pseudo-Wire is identified by the multiplexor/
demultiplexor within this tunnel.ro Enumeration .1.3.6.1.4.1.2636.3.26.1.4.1.11 |
jnxVpnPwTunnelNameThe name of the Tunnel over which this Pseudo-Wire is
carried, if any.ro SnmpAdminString -- .1.3.6.1.4.1.2636.3.26.1.4.1.12 |
jnxVpnPwReceiveDemuxThe value of the demultiplexor that identifies received
packets as belonging to this Pseudo-Wire, if any.ro JnxVpnMultiplexor -- .1.3.6.1.4.1.2636.3.26.1.4.1.13 |
jnxVpnPwTransmitDemuxThe value of the demultiplexor that identifies transmitted
packets as belonging to this Pseudo-Wire, if any.ro JnxVpnMultiplexor -- .1.3.6.1.4.1.2636.3.26.1.4.1.14 |
jnxVpnPwStatusStatus of the Pseudo-Wire.ro Enumeration .1.3.6.1.4.1.2636.3.26.1.4.1.15 |
jnxVpnPwTunnelStatusStatus of the PE-to-PE tunnel over which the Pseudo-
Wire is carried.ro Enumeration .1.3.6.1.4.1.2636.3.26.1.4.1.16 |
jnxVpnPwRemoteSiteStatusStatus of the interface at the remote end of the
Pseudo-Wire.ro Enumeration .1.3.6.1.4.1.2636.3.26.1.4.1.17 |
jnxVpnPwTimeUpThe total time in hundredths of a second that this
Pseudo-Wire has been operational.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.26.1.4.1.18 |
jnxVpnPwTransitionsThe number of state transitions (up -> down and
down -> up) this Tunnel has undergone.ro Gauge32 .1.3.6.1.4.1.2636.3.26.1.4.1.19 |
jnxVpnPwLastTransitionThe time in hundredths of a second since the last
transition occurred on this Tunnel.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.26.1.4.1.20 |
jnxVpnPwPacketsSentThe number of packets that have been sent over this
Pseudo-Wire.ro Counter64 .1.3.6.1.4.1.2636.3.26.1.4.1.21 |
jnxVpnPwOctetsSentThe number of octets that have been sent over this
Pseudo-Wire.ro Counter64 .1.3.6.1.4.1.2636.3.26.1.4.1.22 |
jnxVpnPwPacketsReceivedThe number of packets that have been received over this
Pseudo-Wire.ro Counter64 .1.3.6.1.4.1.2636.3.26.1.4.1.23 |
jnxVpnPwOctetsReceivedThe number of octets that have been received over this
Pseudo-Wire.ro Counter64 .1.3.6.1.4.1.2636.3.26.1.4.1.24 |
jnxVpnPwLRPacketsSentThe number of packets that have been sent over this
Pseudo-Wire.ro Counter32 .1.3.6.1.4.1.2636.3.26.1.4.1.25 |
jnxVpnPwLROctetsSentThe number of octets that have been sent over this
Pseudo-Wire.ro Counter32 .1.3.6.1.4.1.2636.3.26.1.4.1.26 |
jnxVpnPwLRPacketsReceivedThe number of packets that have been received over this
Pseudo-Wire.ro Counter32 .1.3.6.1.4.1.2636.3.26.1.4.1.27 |
jnxVpnPwLROctetsReceivedThe number of octets that have been received over this
Pseudo-Wire.ro Counter32 .1.3.6.1.4.1.2636.3.26.1.4.1.28 |
jnxVpnRTTableTable of Route Targets for a VPN. SEQUENCE OF JnxVpnRTEntry .1.3.6.1.4.1.2636.3.26.1.5 |
jnxVpnRTEntryEntry containing information about a particular VPN. JnxVpnRTEntry .1.3.6.1.4.1.2636.3.26.1.5.1 |
jnxVpnRTVpnTypeThe type of the VPN for which this list of Route Targets
are defined. JnxVpnType .1.3.6.1.4.1.2636.3.26.1.5.1.1 |
jnxVpnRTVpnNameThe name of the VPN for which this list of Route Targets
are defined. JnxVpnName .1.3.6.1.4.1.2636.3.26.1.5.1.2 |
jnxVpnRTIndexThe index within the list of Route Targets that specifies
individual Route Targets that define the VPN. Note: this
index MUST NOT be zero. Unsigned32 .1.3.6.1.4.1.2636.3.26.1.5.1.3 |
jnxVpnRTRowStatusThis variable is used to create, modify, and/or delete a
row in this table.ro RowStatus -- .1.3.6.1.4.1.2636.3.26.1.5.1.4 |
jnxVpnRTStorageTypeThis variable indicates the storage type for this object.ro StorageType -- .1.3.6.1.4.1.2636.3.26.1.5.1.5 |
jnxVpnRTTypeType of the following Route Target. This can one of
'routeTarget[012]' or 'none'.ro JnxVpnIdentifierType -- .1.3.6.1.4.1.2636.3.26.1.5.1.6 |
jnxVpnRTRoute Target for the VPN. If the jnxVpnRTType is
'none', this value should be all zeros.ro JnxVpnIdentifier -- .1.3.6.1.4.1.2636.3.26.1.5.1.7 |
jnxVpnRTFunctionThe route target export distribution type.ro Enumeration .1.3.6.1.4.1.2636.3.26.1.5.1.8 |
jnxVpnMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.26.2 |
More MIBs from Juniper Networks
Browse all Juniper NetworksMIBs →JUNIPER-CHASSIS-DEFINES-MIB
The JUNIPER-CHASSIS-DEFINES-MIB establishes the foundational Object Identifier (OID) namespace and data type definitions required to map and identify specific Juniper chassis hardware platforms and their internal physical components. This module serves as the structural prerequisite for the JUNIPER-CHASSIS-MIB, enabling the retrieval of inventory data, component status, and hardware topology details for Juniper MX, PTX, and EX series devices.
5187 objects→
JUNIPER-MOBILE-GATEWAY-GTP-MIB
The JUNIPER-MOBILE-GATEWAY-GTP-MIB provides SNMP objects for monitoring GTP (GPRS Tunneling Protocol) session states, tunnel endpoints, and protocol counters on Juniper mobile gateway platforms. It enables administrators to track GTP-C and GTP-U traffic statistics, error conditions, and active tunnel metrics essential for validating mobile core network connectivity.
1616 objects→
GGSN-MIB
SNMP MIB module
789 objects→
JUNIPER-IFOPTICS-MIB
SNMP MIB module
754 objects→
JUNIPER-MOBILE-GATEWAY-SGW-GTP-MIB
The JUNIPER-MOBILE-GATEWAY-SGW-GTP-MIB module enables monitoring of GTP (GPRS Tunneling Protocol) session states and traffic counters on Juniper Mobile Gateway Serving Gateways (SGW). It provides specific objects for tracking GTP-C and GTP-U tunnel establishment, teardown, and packet throughput metrics essential for validating mobile core network connectivity.
683 objects→
JUNIPER-IPSEC-FLOW-MON-MIB
The JUNIPER-IPSEC-FLOW-MON-MIB monitors Juniper Networks IPsec VPN infrastructure by exposing tables for IKE tunnels, IPSec tunnels, and IPSec security associations to track tunnel states, association parameters, and flow statistics. This module facilitates the management of IPsec security policies and the operational status of encrypted traffic flows within the device's security architecture.
453 objects→