JUNIPER-TWAMP-MIB
Updated Mar 1, 2014AI MIB Summary
The JUNIPER-TWAMP-MIB enables monitoring and management of Two-Way Active Measurement Protocol (TWAMP) sessions on Juniper Networks devices, exposing metrics such as active session counts, test packet transmission rates, and one-way or two-way latency and packet loss statistics. This module facilitates the collection of performance data required to validate network path quality and troubleshoot service-level agreement (SLA) compliance.
This mib provides data associated with the TWAMP feature
Main OID:
jnxTwampMib.1.3.6.1.4.1.2636.3.77.1
68
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
jnxTwampMibThis mib provides data associated with the TWAMP feature MODULE-IDENTITY .1.3.6.1.4.1.2636.3.77.1 |
SNMPv2-SMIThis mib provides data associated with the TWAMP feature NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.77.1 |
jnxTwampClientNodeThe node contains all the TWAMP client related tables. OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.77.1.1 |
jnxTwampClientResultsSampleTableThis table provides measurements from the latest individual TWAMP
probe samples. Within each sample, the specific measurement type
is identified by jnxTwampClientResSampleType. Note, if the latest
probe was unsuccessful, no measurement types will be available.
See the definition of JnxTwampClientMeasurementType for details on
the types of measurements available. SEQUENCE OF JnxTwampClientResultsSampleEntry .1.3.6.1.4.1.2636.3.77.1.1.1 |
jnxTwampClientResultsSampleEntryEach entry provides a specific measurement type for a single
probe. JnxTwampClientResultsSampleEntry .1.3.6.1.4.1.2636.3.77.1.1.1.1 |
jnxTwampResSampleTypeThis object identifies the specific measurement type returned
by jnxTwampResSampleValue. JnxTwampClientMeasurementType .1.3.6.1.4.1.2636.3.77.1.1.1.1.1 |
jnxTwampResSampleValueThis object returns the measurement identified by the corresponding
jnxTwampResSampleType.ro Integer32 .1.3.6.1.4.1.2636.3.77.1.1.1.1.2 |
jnxTwampResSampleDateThis object provides the date and time of when this measurement
was obtained.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.77.1.1.1.1.3 |
jnxTwampClientResultsSummaryTableThis table provides a summary of the results for a specific
TWAMP entry (identified by pingCtlOwnerIndex/pingCtlTestName).
The scope of the summary is identified by jnxTwampClientResSumCollection. SEQUENCE OF JnxTwampClientResultsSummaryEntry .1.3.6.1.4.1.2636.3.77.1.1.2 |
jnxTwampClientResultsSummaryEntryEach entry in the table provides a summary of the TWAMP results
over a single collection of probes(test session). For each TWAMP entry, there
are several collections maintained: the current test, the
most recently completed test, a configurable number of the most
recent probes (aka 'moving average'), and a global collection
representing all the probes. Each entry in this table summarizes
the results for one of these collections. JnxTwampClientResultsSummaryEntry .1.3.6.1.4.1.2636.3.77.1.1.2.1 |
jnxTwampResSumCollectionThis object identifes the collection of probes over which the
summary data represented by the other objects in this table
applies. Note, if a collection type is not supported or not
configured, it will not be instantiated in this table. JnxTwampClientCollectionType .1.3.6.1.4.1.2636.3.77.1.1.2.1.1 |
jnxTwampResSumSentThis object provides the number of probes sent within the
collection identified by jnxTwampResSumCollection.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.2.1.2 |
jnxTwampResSumReceivedThis object provides the number of probes received within the
collection identified by jnxTwampResSumCollection.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.2.1.3 |
jnxTwampResSumPercentLostThis object provides the percentage of probes lost within the
collection identified by jnxTwampResSumCollection.ro JnxTwampPercentType .1.3.6.1.4.1.2636.3.77.1.1.2.1.4 |
jnxTwampResSumDateThis object provides the date and time of when the most recent
probe within the collection identified by jnxTwampResSumCollection
was completed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.77.1.1.2.1.5 |
jnxTwampClientResultsCalculatedTableThis table provides a set of calculated values for each
TWAMP entry, for each collection of probes maintained within that
entry, and for each supported measurement set within that
collection of probes.
This table will skip over any measurement set for which
there are 0 samples. SEQUENCE OF JnxTwampClientResultsCalculatedEntry .1.3.6.1.4.1.2636.3.77.1.1.3 |
jnxTwampClientResultsCalculatedEntry JnxTwampClientResultsCalculatedEntry .1.3.6.1.4.1.2636.3.77.1.1.3.1 |
jnxTwampResCalcSetThis object identifies the measurement set upon which the
calculations returned by the other objects in this table are
based. JnxTwampClientMeasurementSet .1.3.6.1.4.1.2636.3.77.1.1.3.1.1 |
jnxTwampResCalcSamplesThe number of samples used in this calculations.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.3.1.2 |
jnxTwampResCalcMinThe minimum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.3.1.3 |
jnxTwampResCalcMaxThe maximum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.3.1.4 |
jnxTwampResCalcAverageThe average of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.3.1.5 |
jnxTwampResCalcPkToPkThe difference between the minimum and maximum of all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.3.1.6 |
jnxTwampResCalcStdDevThe standard deviation calculated over all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.3.1.7 |
jnxTwampResCalcSumThe sum of all the samples in the collection and measurement set
associated with this row. Values are provided in units of
microseconds.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.77.1.1.3.1.8 |
jnxTwampClientHistorySampleTableThis table provides measurements for individual TWAMP probe samples(test sessions).
In addition to the last completed sample, a configurable number of
the most recent samples are available as well. Within each sample,
the specific measurement type is identified by
jnxTwampHistSampleType. Note, if probe was unsuccessful, no
measurement types will be available for that history entry.
See the definition of JnxTwampClientMeasurementType for details on
of measurements available. SEQUENCE OF JnxTwampClientHistorySampleEntry .1.3.6.1.4.1.2636.3.77.1.1.4 |
jnxTwampClientHistorySampleEntry JnxTwampClientHistorySampleEntry .1.3.6.1.4.1.2636.3.77.1.1.4.1 |
jnxTwampHistSampleTypeThis object identifies the specific measurement type returned
by jnxTwampHistSampleValue. JnxTwampClientMeasurementType .1.3.6.1.4.1.2636.3.77.1.1.4.1.1 |
jnxTwampHistSampleValueThis object returns the measurement identified by the corresponding
jnxTwampHistSampleType.ro Integer32 .1.3.6.1.4.1.2636.3.77.1.1.4.1.2 |
jnxTwampClientHistorySummaryTableThis table provides historical summary data for each collection
of probes(test session) within each TWAMP Control Entry, similar to the
jnxTwampClientResultsSummaryTable.
In addition to the current summary, this table provides the same
number of historical entries as the jnxTwampClientHistorySampleTable. SEQUENCE OF JnxTwampClientHistorySummaryEntry .1.3.6.1.4.1.2636.3.77.1.1.5 |
jnxTwampClientHistorySummaryEntry JnxTwampClientHistorySummaryEntry .1.3.6.1.4.1.2636.3.77.1.1.5.1 |
jnxTwampHistSumCollectionIdentifies the collection of probes whose results are summarized by
this row.
At this time, historical summaries are available only for the
current test (currentTest(1)). JnxTwampClientCollectionType .1.3.6.1.4.1.2636.3.77.1.1.5.1.1 |
jnxTwampHistSumSentThis object provides the number of probes sent within the
collection identified by jnxTwampHistSumCollection.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.5.1.2 |
jnxTwampHistSumReceivedThis object provides the number of probes received within the
collection identified by jnxTwampHistSumCollection.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.5.1.3 |
jnxTwampHistSumPercentLostThis object provides the percentage of probes lost within the
collection identified by jnxTwampHistSumCollection.ro JnxTwampPercentType .1.3.6.1.4.1.2636.3.77.1.1.5.1.4 |
jnxTwampClientHistoryCalculatedTableThis table provides a set of calculated values for each
TWAMP control entry, for each test session maintained within that
entry, and for each supported calculated type within that
collection of probes, similar to the jnxTwampClientResultsCalculatedTable.
In addition to the current summary, this table provides the same
number of historical entries as the jnxTwampClientHistorySampleTable. SEQUENCE OF JnxTwampClientHistoryCalculatedEntry .1.3.6.1.4.1.2636.3.77.1.1.6 |
jnxTwampClientHistoryCalculatedEntry JnxTwampClientHistoryCalculatedEntry .1.3.6.1.4.1.2636.3.77.1.1.6.1 |
jnxTwampHistCalcSetThis object identifies the measurement set upon which the
calculations returned by the other objects in this table are
based. JnxTwampClientMeasurementSet .1.3.6.1.4.1.2636.3.77.1.1.6.1.1 |
jnxTwampHistCalcSamplesThe number of samples used in this calculations.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.6.1.2 |
jnxTwampHistCalcMinThe minimum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.6.1.3 |
jnxTwampHistCalcMaxThe maximum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.6.1.4 |
jnxTwampHistCalcAverageThe average of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.6.1.5 |
jnxTwampHistCalcPkToPkThe difference between the minimum and maximum of all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.6.1.6 |
jnxTwampHistCalcStdDevThe standard deviation calculated over all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds.ro Unsigned32 .1.3.6.1.4.1.2636.3.77.1.1.6.1.7 |
jnxTwampHistCalcSumThe sum of all the samples in the collection and measurement set
associated with this row. Values are provided in units of
microseconds.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.77.1.1.6.1.8 |
jnxTwampClientControlConnectionTableTable of Client Sessions. SEQUENCE OF JnxTwampClientCCEntry .1.3.6.1.4.1.2636.3.77.1.1.7 |
jnxTwampClientCCEntryTWAMP Client Session characteristics. JnxTwampClientCCEntry .1.3.6.1.4.1.2636.3.77.1.1.7.1 |
jnxTwampClientControlConnectionIDTWAMP Client control session ID. SnmpAdminString .1.3.6.1.4.1.2636.3.77.1.1.7.1.1 |
jnxTwampClientCCNameText string containing the session's unique name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.77.1.1.7.1.2 |
jnxTwampClientCCStatusIf the control session is active, this would return 1.
If the control session does not have any currently
running test sessions and is not active, this would return 2.ro Enumeration .1.3.6.1.4.1.2636.3.77.1.1.7.1.3 |
jnxTwampClientServerAddressServer IP address for TWAMP TCP control session.ro IpAddress .1.3.6.1.4.1.2636.3.77.1.1.7.1.4 |
jnxTwampClientServerPortDestination port for TWAMP TCP control connection.ro INTEGER .1.3.6.1.4.1.2636.3.77.1.1.7.1.5 |
jnxTwampClientTSConfiguredCountNumber test sessions configured.ro INTEGER .1.3.6.1.4.1.2636.3.77.1.1.7.1.6 |
jnxTwampClientTSActiveCountNumber of test sessions currently running.ro INTEGER .1.3.6.1.4.1.2636.3.77.1.1.7.1.7 |
jnxTwampClientAuthModeAuthenticated mode for the control session.ro Enumeration .1.3.6.1.4.1.2636.3.77.1.1.7.1.8 |
jnxTwampClientTestSessionsTableTable of Test Sessions. SEQUENCE OF JnxTwampClientTSEntry .1.3.6.1.4.1.2636.3.77.1.1.8 |
jnxTwampClientTSEntryTWAMP Test Session characteristics. JnxTwampClientTSEntry .1.3.6.1.4.1.2636.3.77.1.1.8.1 |
jnxTwampClientTestSessionIDTest Session ID. SnmpAdminString .1.3.6.1.4.1.2636.3.77.1.1.8.1.1 |
jnxTwampClientTSNameTWAMP Test Session Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.77.1.1.8.1.2 |
jnxTwampClientTSStatusTWAMP Test Session status.ro Enumeration .1.3.6.1.4.1.2636.3.77.1.1.8.1.3 |
jnxTwampClientTSSenderAddressTwamp Test Sender Address.ro IpAddress .1.3.6.1.4.1.2636.3.77.1.1.8.1.4 |
jnxTwampClientTSSenderPortTWAMP Test Session Sender Port.ro INTEGER .1.3.6.1.4.1.2636.3.77.1.1.8.1.5 |
jnxTwampClientTSReflectorAddressTWAMP Test Session Reflector Address.ro IpAddress .1.3.6.1.4.1.2636.3.77.1.1.8.1.6 |
jnxTwampClientTSReflectorPortTWAMP Test Session Reflector Port.ro INTEGER .1.3.6.1.4.1.2636.3.77.1.1.8.1.7 |
jnxTwampRpmIdentityThis object is added to be binded to the traps. This object simply identifies if
its an RPM type of test or a TWAMP type of test.ro Enumeration .1.3.6.1.4.1.2636.3.77.1.2 |
twampNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.27.1 |
jnxTwampClientControlConnectionClosedThis trap is generated when all the test iterations configured under the control
connection finish running and control connection is closed. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.27.1.1 |
jnxTwampClientTestIterationFinishedThis trap is generated when one test iteration is finished for all the
test sessions configured under the control connection. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.27.1.2 |