JUNIPER-SONET-MIB
Updated Jul 18, 2003The JUNIPER-SONET-MIB enables SNMP-based monitoring of Juniper SONET/SDH physical interfaces, specifically tracking optical signal parameters, line status states, and error counters such as SEF, LOS, and AIS. This module facilitates granular fault detection and performance analysis for high-speed transport circuits on Juniper routing and switching platforms.
Imported Objects
Objects
12 total| Object Name |
|---|
jnxSonetThis MIB module defines objects used for managing the
sonet/sdh interfaces of Juniper products. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.20 |
jnxSonetAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.20.1 |
jnxSonetAlarmTableInformation about alarms on all the sonet/sdh physical
interfaces on this router. SEQUENCE OF JnxSonetAlarmEntry .1.3.6.1.4.1.2636.3.20.1.1 |
jnxSonetAlarmEntryInformation about alarms on a sonet/sdh physical interface on
this router. JnxSonetAlarmEntry .1.3.6.1.4.1.2636.3.20.1.1.1 |
jnxSonetCurrentAlarmsThis object identifies all the active sonet/sdh alarms on this
interface.ro JnxSonetAlarmId .1.3.6.1.4.1.2636.3.20.1.1.1.1 |
jnxSonetLastAlarmIdThe object identifies the sonet/sdh alarm that most recently
was set or cleared.ro JnxSonetAlarmId .1.3.6.1.4.1.2636.3.20.1.1.1.2 |
jnxSonetLastAlarmTimeThe value of sysUpTime when the management subsystem learned
of the last alarm event.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.20.1.1.1.3 |
jnxSonetLastAlarmDateThe system date and time when the management subsystem learned
of the last alarm event.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.20.1.1.1.4 |
jnxSonetLastAlarmEventThis indicates whether the last alarm event set a new alarm
or cleared an existing alarm.ro Enumeration .1.3.6.1.4.1.2636.3.20.1.1.1.5 |
jnxSonetNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.6.0 |
jnxSonetAlarmSetNotification of a recently set sonet/sdh alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.6.0.1 |
jnxSonetAlarmClearedNotification of a recently cleared sonet/sdh alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.6.0.2 |
More MIBs from Juniper Networks
Browse all Juniper NetworksMIBs →The JUNIPER-CHASSIS-DEFINES-MIB establishes the foundational Object Identifier (OID) namespace and data type definitions required to map and identify specific Juniper chassis hardware platforms and their internal physical components. This module serves as the structural prerequisite for the JUNIPER-CHASSIS-MIB, enabling the retrieval of inventory data, component status, and hardware topology details for Juniper MX, PTX, and EX series devices.
The JUNIPER-MOBILE-GATEWAY-GTP-MIB provides SNMP objects for monitoring GTP (GPRS Tunneling Protocol) session states, tunnel endpoints, and protocol counters on Juniper mobile gateway platforms. It enables administrators to track GTP-C and GTP-U traffic statistics, error conditions, and active tunnel metrics essential for validating mobile core network connectivity.
SNMP MIB module
SNMP MIB module
The JUNIPER-MOBILE-GATEWAY-SGW-GTP-MIB module enables monitoring of GTP (GPRS Tunneling Protocol) session states and traffic counters on Juniper Mobile Gateway Serving Gateways (SGW). It provides specific objects for tracking GTP-C and GTP-U tunnel establishment, teardown, and packet throughput metrics essential for validating mobile core network connectivity.
The JUNIPER-IPSEC-FLOW-MON-MIB monitors Juniper Networks IPsec VPN infrastructure by exposing tables for IKE tunnels, IPSec tunnels, and IPSec security associations to track tunnel states, association parameters, and flow statistics. This module facilitates the management of IPsec security policies and the operational status of encrypted traffic flows within the device's security architecture.