JUNIPER-NAT-MIB
Updated Aug 27, 2020AI MIB Summary
The JUNIPER-NAT-MIB enables monitoring of Network Address Translation attributes on Juniper devices, specifically tracking NAT session statistics, translation table entries, and protocol mapping states for IPv4 and IPv6 traffic.
This module defines the object that are used to monitor network address translation attributes.
Main OID:
jnxNatMIB.1.3.6.1.4.1.2636.3.59.1
37
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
jnxNatMIBThis module defines the object that are used to monitor
network address translation attributes. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.59.1 |
jnxNatNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.59.1.0 |
jnxNatAddrPoolThresholdStatusThe Source NAT address pool utilization threshold status
trap signifies that the address pool utilization
is either exceeds certain percentage, or clear of
that percentage.
jnxNatTrapPoolName is the name of the resource pool
jnxNatAddrPoolUtil is the percentage of utilization
of the address pool. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.59.1.0.1 |
jnxNatObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.59.1.1 |
jnxSrcNatStatsTableThis table exposes the source NAT translation
attributes of the translated addresses.
When performing source IP address translation, the services pic
translates the original source IP address and/or port
number to different one. The resource, address source pools
provide the service pic with a supply of addresses from
which to draw when performing source network address translation.
This table contains information on source IP address
translation only. SEQUENCE OF JnxSrcNatStatsEntry .1.3.6.1.4.1.2636.3.59.1.1.1 |
jnxSrcNatStatsEntrySource NAT address entries. It is indexed by the address
pool table and the address allocated. JnxSrcNatStatsEntry .1.3.6.1.4.1.2636.3.59.1.1.1.1 |
jnxNatSrcPoolNameThe name of dynamic source IP address pool.
This is the address pool where the translated
address is allocated from. DisplayString .1.3.6.1.4.1.2636.3.59.1.1.1.1.1 |
jnxNatSrcXlatedAddrTypeThe type of dynamic source IP address allocated from
the address pool used in the NAT translation.
For NAT MIB, supporting ipv4(1) and ipv6(2) only.ro Enumeration .1.3.6.1.4.1.2636.3.59.1.1.1.1.2 |
jnxNatSrcPoolTypeSource NAT can do address translation with or without port
translation. The source port pool type indicates
whether the address translation is done with port or without
the port, or if it is a static translation.ro Enumeration .1.3.6.1.4.1.2636.3.59.1.1.1.1.3 |
jnxNatSrcNumPortAvailThe maxmimum number of ports available with this pool.
This attribute is only applicable to NAT translations with PAT.ro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.1.1.4 |
jnxNatSrcNumPortInuseThe number of ports in use for this NAT address entry.
This attribute is only applicable to translation with
port translation.ro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.1.1.5 |
jnxNatSrcNumAddressAvailThe maximum number of addresses available in this pool.ro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.1.1.6 |
jnxNatSrcNumAddressInUseThe number of addresses in use from this pool.
This attribute is only applicable to NAT translations without PAT.ro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.1.1.7 |
jnxNatSrcNumSessionsThe number of sessions are in use based on this NAT address
entry.ro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.1.1.8 |
jnxNatSrcNumAddressMappedThe number of public addresses mapped
This attribute is only applicable for NAT translations with PAT.ro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.1.1.9 |
jnxNatRuleTableThis table monitors NAT rule hits SEQUENCE OF JnxNatRuleEntry .1.3.6.1.4.1.2636.3.59.1.1.2 |
jnxNatRuleEntryNAT rule hit entries. It is indexed by the rule index JnxNatRuleEntry .1.3.6.1.4.1.2636.3.59.1.1.2.1 |
jnxNatRuleNameNAT rule name DisplayString .1.3.6.1.4.1.2636.3.59.1.1.2.1.1 |
jnxNatRuleTypeNAT types: Static Source, Static Destination,
Dynamic Source and NAPTro Enumeration .1.3.6.1.4.1.2636.3.59.1.1.2.1.2 |
jnxNatRuleTransHitsThe number of hits on this NAT rulero Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.2.1.3 |
jnxNatPoolTableThis table monitors NAT pool hits SEQUENCE OF JnxNatPoolEntry .1.3.6.1.4.1.2636.3.59.1.1.3 |
jnxNatPoolEntryNAT pool hit entries. It is indexed by the pool index JnxNatPoolEntry .1.3.6.1.4.1.2636.3.59.1.1.3.1 |
jnxNatPoolNameNAT Pool name DisplayString .1.3.6.1.4.1.2636.3.59.1.1.3.1.1 |
jnxNatPoolTypeNAT types: Static Source, Static Destination,
Dynamic Source and NAPTro Enumeration .1.3.6.1.4.1.2636.3.59.1.1.3.1.2 |
jnxNatPoolTransHitsThe number of hits on this NAT Poolro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.3.1.3 |
jnxNatPbaStatsTableThis table monitors NAT PBA stats SEQUENCE OF JnxNatPbaStatsEntry .1.3.6.1.4.1.2636.3.59.1.1.4 |
jnxNatPbaStatsEntryNAT PBA stats entries. It is indexed by the pool index JnxNatPbaStatsEntry .1.3.6.1.4.1.2636.3.59.1.1.4.1 |
jnxNatPbaPoolNameNAT PBA Pool namero DisplayString .1.3.6.1.4.1.2636.3.59.1.1.4.1.1 |
jnxNatPbaOutOfPortErrorThe Number of times the out of port error is hitro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.4.1.2 |
jnxNatPbaMaxNumberOfPortBlocksUsedThe count of Max number of blocks used for the poolro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.4.1.3 |
jnxNatPbaCurrentNumberOfPortBlocksInUseThe count of current number of blocks used for the poolro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.4.1.4 |
jnxNatPbaPortBlockAllocErrorsThe count of port block allocation errorsro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.4.1.5 |
jnxNatPbaPortBlockMemAllocErrorsThe count of port block memory allocation errorsro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.4.1.6 |
jnxNatPbaPortBlockLimitExeededErrorsThe count of port block limit exceeded errors hitro Unsigned32 .1.3.6.1.4.1.2636.3.59.1.1.4.1.7 |
jnxNatTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.59.1.2 |
jnxNatAddrPoolUtilThe dynamic address pool utilization in percentage.ro Integer32 .1.3.6.1.4.1.2636.3.59.1.2.1 |
jnxNatTrapSrcPoolNameSource NAT Pool name who issues trapro DisplayString .1.3.6.1.4.1.2636.3.59.1.2.2 |