JUNIPER-MOBILE-GATEWAY-SM-IP-POOL-MIB
Updated Nov 15, 2011AI MIB Summary
The JUNIPER-MOBILE-GATEWAY-SM-IP-POOL-MIB module provides SNMP access to monitor and manage IP address pool allocation, utilization, and lease status for mobile-edge subscriber sessions on Juniper Mobile Gateway platforms. It exposes specific counters and gauges for active pool usage, available address counts, and pool exhaustion events to facilitate capacity planning and fault isolation in 4G/5G core networks.
This module defines objects pertaining to Mobile-Edge Subscriber Management IP pool Services
Main OID:
jnxMobileGatewayPgwSMIPPoolMib.1.3.6.1.4.1.2636.3.66.5
62
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
jnxMobileGatewayPgwSMIPPoolMibThis module defines objects pertaining to Mobile-Edge Subscriber
Management IP pool Services MODULE-IDENTITY .1.3.6.1.4.1.2636.3.66.5 |
jnxMbgSMIPPoolNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.66.5.0 |
jnxMbgSMIPPoolThresholdExceededThis notification signifies that the number of addresses allocated
from a given address pool has exceeded a pre-configured threshold
value. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.66.5.0.1 |
jnxMbgSMIPPoolMMStateChangeThis notification indicates that the pool name indicated by
LS-name, RI-name and pool-name undergoes a change in the
maintenance-mode state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.66.5.0.2 |
jnxMbgSMIPRangeHighThresExcdThis notification indicates that the range name that exceeded
higher threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.66.5.0.3 |
jnxMbgSMIPRangeLowThresRchdThis notification indicates that the range name that reached
lower threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.66.5.0.4 |
jnxMbgSMIPPoolHighThresExcdThis notification signifies that the number of addresses allocated
from a given address pool has exceeded a pre-configured threshold
value. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.66.5.0.5 |
jnxMbgSMIPPoolLowThresRchdThis notification signifies that the number of addresses allocated
from a given address pool has reached the lower threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.66.5.0.6 |
jnxMbgIPPoolExhaustedThis notification signifies that the given pool has exhausted all its
addresses and there are no free addresses left. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.66.5.0.7 |
jnxMbgSMIPPoolObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.66.5.1 |
jnxMbgSMIPPoolTableThe table lists local address pools and their statisticsdeprecated SEQUENCE OF JnxMbgSMIPPoolEntry .1.3.6.1.4.1.2636.3.66.5.1.1 |
jnxMbgSMIPPoolEntryAn entry representing a single address range or prefix entry
in the pooldeprecated JnxMbgSMIPPoolEntry .1.3.6.1.4.1.2636.3.66.5.1.1.1 |
jnxMbgSMIPPoolNameA name which identifies this pool on the mobile-gateway.deprecated DisplayString .1.3.6.1.4.1.2636.3.66.5.1.1.1.1 |
jnxMbgSMIPPoolLogicalSystemA name which identifies the logical-system to which the address
pool belongs.deprecated DisplayString .1.3.6.1.4.1.2636.3.66.5.1.1.1.2 |
jnxMbgSMIPPoolRoutingInstanceA name which identifies the routing instance to which the address
pool belongs.deprecated DisplayString .1.3.6.1.4.1.2636.3.66.5.1.1.1.3 |
jnxMbgSMIPPoolTypeIndicates whether this pool entry is of type ipv4 or ipv6.rodeprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.66.5.1.1.1.4 |
jnxMbgSMIPPoolFreeTotal number of free addresses in this pool entry.rodeprecated Unsigned32 .1.3.6.1.4.1.2636.3.66.5.1.1.1.5 |
jnxMbgSMIPPoolInUseTotal number of used addresses in this pool entry.rodeprecated Unsigned32 .1.3.6.1.4.1.2636.3.66.5.1.1.1.6 |
jnxMbgSMIPPoolUtilPercentage utilization for this pool entry.rodeprecated Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.1.1.7 |
jnxMbgSMIPPoolNotificationVars OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.66.5.1.2 |
jnxMbgSMIPPoolThresholdPoolNameThe name which identifies the address pool on the mobile-gateway
for which the threshold was exceeded.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.1 |
jnxMbgSMIPPoolThresholdLSNameThe name which identifies the logical-system on the mobile-gateway
in which the address pool threshold was exceeded.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.2 |
jnxMbgSMIPPoolThresholdRINameThe name which identifies the routing instance on the mobile-gateway
in which the address pool threshold was exceeded.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.3 |
jnxMbgSMIPPoolConfiguredThresholdThe threshold value configured for an address pool on the mobile
gateway exceeding which a notification is generated.rodeprecated Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.4 |
jnxMbgSMIPPoolCurrentThresholdThe current threshold value for an address pool on the mobile
gateway. This can be equal to or greater than the configured
threshold value.rodeprecated Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.5 |
jnxMbgSMIPPoolMMPoolNameThe name which identifies the address pool on the mobile-gateway
which underwent a change in the maintenance-mode state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.6 |
jnxMbgSMIPPoolMMLSNameThe name which identifies the logical-system on the mobile-gateway
which underwent a change in the maintenance-mode state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.7 |
jnxMbgSMIPPoolMMRINameThe name which identifies the routing instance on the mobile-gateway
which underwent a change in the maintenance-mode state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.8 |
jnxMbgSMIPPoolPrevMMStateA string that indicates the maintenance-mode state .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.9 |
jnxMbgSMIPPoolNewMMStateA string that indicates the maintenance-mode state .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.10 |
jnxMbgSMIPRangeHiThresRangeNameThe name which identifies the address pool's range on the mobile-gateway
for which the threshold was exceeded.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.11 |
jnxMbgSMIPRangeHiThresPoolNameThe name which identifies the address pool on the mobile-gateway, whose
range threshold was exceeded.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.12 |
jnxMbgSMIPRangeHiLSNameThe name which identifies the logical-system on the mobile-gateway
in which the address range threshold was exceeded.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.13 |
jnxMbgSMIPRangeHiRINameThe name which identifies the routing instance on the mobile-gateway
in which the address range threshold was exceeded.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.14 |
jnxMbgSMIPRangeHiCfgThresThe threshold value configured for an address pool range on the mobile
gateway exceeding which a notification is generated.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.15 |
jnxMbgSMIPRangeHiCurrUtilThe current threshold value for an address pool range on the mobile
gateway. This can be equal to or greater than the configured
threshold value.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.16 |
jnxMbgSMIPRangeLowThresRangeNameThe name which identifies the address pool's range on the mobile-gateway
for which the low threshold was reached.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.17 |
jnxMbgSMIPRangeLowThresPoolNameThe name which identifies the address pool on the mobile-gateway, whose
range low threshold was reached.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.18 |
jnxMbgSMIPRangeLowLSNameThe name which identifies the logical-system on the mobile-gateway
in which the address range low threshold was reached.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.19 |
jnxMbgSMIPRangeLowRINameThe name which identifies the routing instance on the mobile-gateway
in which the address range low threshold was reached.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.2.20 |
jnxMbgSMIPRangeLowCfgThresThe threshold value configured for an address pool range on the mobile
gateway reaching which a notification is generated.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.21 |
jnxMbgSMIPRangeLowCurrUtilThe current threshold value for an address pool range on the mobile
gateway. This can be equal to or greater than the configured
threshold value.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.22 |
jnxMbgSMIPPoolHTCfgThresThe threshold value configured for an address pool on the mobile gateway
exceeding which a notification is generated.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.23 |
jnxMbgSMIPPoolCurrUtilThe current utilization value for an address pool on the mobile
gateway. This can be equal to or greater than the configured
threshold value.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.24 |
jnxMbgSMIPPoolLTCfgThresThe threshold value configured for an address pool on the mobile gateway
reaching which a notification is generated.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.2.25 |
jnxMbgIPPoolTableThe table exposes the local address pools attributes and
their statistics.
This table contains information about local address pools only. SEQUENCE OF JnxMbgIPPoolEntry .1.3.6.1.4.1.2636.3.66.5.1.3 |
jnxMbgIPPoolEntryAn entry representing a single address range or prefix entry
in the pool. It is indexed by Pool Id. JnxMbgIPPoolEntry .1.3.6.1.4.1.2636.3.66.5.1.3.1 |
jnxMbgIPPoolIdA Pool Id which identifies a pool on the mobile-gateway. Unsigned32 .1.3.6.1.4.1.2636.3.66.5.1.3.1.1 |
jnxMbgIPPoolLogicalSystemA name which identifies the logical-system to which the address
pool belongs on the mobile gateway.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.3.1.2 |
jnxMbgIPPoolRoutingInstanceA name which identifies the routing instance to which the address
pool belongs on the mobile gateway.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.3.1.3 |
jnxMbgIPPoolNameA name which identifies the pool on the mobile-gateway.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.66.5.1.3.1.4 |
jnxMbgIPPoolTypeThe type configured for this pool on the mobile gateway.
Types supported are Ipv4(1) or IPv6(2).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.66.5.1.3.1.5 |
jnxMbgIPPoolFreeTotal number of free addresses in this pool.ro Gauge32 .1.3.6.1.4.1.2636.3.66.5.1.3.1.6 |
jnxMbgIPPoolInUseTotal number of used addresses in this pool.ro Gauge32 .1.3.6.1.4.1.2636.3.66.5.1.3.1.7 |
jnxMbgIPPoolUtilPercentage utilization for this pool.ro Gauge32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.3.1.8 |
jnxMbgIPPoolRangeTableThe table exposes the local address pool range's attributes and
their statistics.
This table contains information about local address pools only. SEQUENCE OF JnxMbgIPPoolRangeEntry .1.3.6.1.4.1.2636.3.66.5.1.4 |
jnxMbgIPPoolRangeEntryAn entry representing a address ranges in the pool. It is
indexed by the Gateway Index, Logical System Id,
Routing Instance Id, Pool Id and Range Id. JnxMbgIPPoolRangeEntry .1.3.6.1.4.1.2636.3.66.5.1.4.1 |
jnxMbgIPPoolRangeNameThe name of the local IP address pool range DisplayString .1.3.6.1.4.1.2636.3.66.5.1.4.1.1 |
jnxMbgIPPoolRangeTypeThe type configured for this range on the mobile gateway.
Types supported are Ipv4(1) or IPv6(2).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.66.5.1.4.1.2 |
jnxMbgIPPoolRangeFreeTotal number of free addresses in this range.ro Gauge32 .1.3.6.1.4.1.2636.3.66.5.1.4.1.3 |
jnxMbgIPPoolRangeInUseTotal number of used addresses in this range.ro Gauge32 .1.3.6.1.4.1.2636.3.66.5.1.4.1.4 |
jnxMbgIPPoolRangeUtilPercentage utilization for this range.ro Gauge32 UNITS "percent" .1.3.6.1.4.1.2636.3.66.5.1.4.1.5 |