JUNIPER-LSYSSP-NATSRCRULE-MIB
Updated May 19, 2010The JUNIPER-LSYSSP-NATSRCRULE-MIB monitors and manages NAT source rule resource quotas and static/dynamic resource limits within Juniper Enterprise Logical Systems (LSYS) security profiles. It provides SNMP visibility into specific NAT-source-rule counters and thresholds to enforce resource management policies across virtualized security contexts.
Imported Objects
Objects
17 total| Object Name |
|---|
jnxLsysSpNATsrcruleMIBThis module defines the NAT-source-rule-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-source-rule resource is the focus in this MIB. MODULE-IDENTITY .jnxLsysSpNATsrcrule.1 |
jnxLsysSpNATsrcruleObjects OBJECT IDENTIFIER .jnxLsysSpNATsrcrule.1.1 |
jnxLsysSpNATsrcruleTableLSYSPROFILE NAT-source-rule objects for NAT-source-rule
resource consumption per LSYS. SEQUENCE OF JnxLsysSpNATsrcruleEntry .jnxLsysSpNATsrcrule.1.1.1 |
jnxLsysSpNATsrcruleEntryAn entry in NAT-source-rule resource table. JnxLsysSpNATsrcruleEntry .jnxLsysSpNATsrcrule.1.1.1.1 |
jnxLsysSpNATsrcruleLsysNameThe name of the logical system for which NAT-source-rule
resource information is retrieved. DisplayString .jnxLsysSpNATsrcrule.1.1.1.1.1 |
jnxLsysSpNATsrcruleProfileNameThe security profile name string for the LSYS.ro DisplayString .jnxLsysSpNATsrcrule.1.1.1.1.2 |
jnxLsysSpNATsrcruleUsageThe current resource usage count for the LSYS.ro Unsigned32 .jnxLsysSpNATsrcrule.1.1.1.1.3 |
jnxLsysSpNATsrcruleReservedThe reserved resource count for the LSYS.ro Unsigned32 .jnxLsysSpNATsrcrule.1.1.1.1.4 |
jnxLsysSpNATsrcruleMaximumThe maximum allowed resource usage count for the LSYS.ro Unsigned32 .jnxLsysSpNATsrcrule.1.1.1.1.5 |
jnxLsysSpNATsrcruleSummary OBJECT IDENTIFIER .jnxLsysSpNATsrcrule.1.2 |
jnxLsysSpNATsrcruleUsedAmountThe NAT-source-rule resource consumption over all LSYS.ro Unsigned32 .jnxLsysSpNATsrcrule.1.2.1 |
jnxLsysSpNATsrcruleMaxQuotaThe NAT-source-rule resource maximum quota for the whole
device for all LSYS.ro Unsigned32 .jnxLsysSpNATsrcrule.1.2.2 |
jnxLsysSpNATsrcruleAvailableAmountThe NAT-source-rule resource available in the whole device.ro Unsigned32 .jnxLsysSpNATsrcrule.1.2.3 |
jnxLsysSpNATsrcruleHeaviestUsageThe most amount of NAT-source-rule resource consumed of a
LSYS.ro Unsigned32 .jnxLsysSpNATsrcrule.1.2.4 |
jnxLsysSpNATsrcruleHeaviestUserThe LSYS name that consume the most NAT-source-rule resource.ro DisplayString .jnxLsysSpNATsrcrule.1.2.5 |
jnxLsysSpNATsrcruleLightestUsageThe least amount of NAT-source-rule resource consumed of a
LSYS.ro Unsigned32 .jnxLsysSpNATsrcrule.1.2.6 |
jnxLsysSpNATsrcruleLightestUserThe LSYS name that consume the least NAT-source-rule resource.ro DisplayString .jnxLsysSpNATsrcrule.1.2.7 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module