JUNIPER-FABRIC-MIB
Updated Oct 9, 2014The JUNIPER-FABRIC-MIB provides SNMP management interfaces for Juniper Networks fabric Manager to monitor and control the status, topology, and operational health of Juniper QFX and EX series fabric clusters. It exposes specific metrics including fabric member node states, interconnect link status, and fabric-wide configuration parameters required for centralized cluster administration.
Imported Objects
Objects
26 total| Object Name |
|---|
jnxFabricMibThe MIB modules representing Juniper Networks
fabric Manager MODULE-IDENTITY .1.3.6.1.4.1.2636.3.81.1 |
jnxFabricMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.81.1.1 |
jnxFabricStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.81.1.1.1 |
jnxFabricSourceStatisticsTableA list of fabric statistics entries based on the source of statistics. SEQUENCE OF JnxFabricSourceStatisticsEntry .1.3.6.1.4.1.2636.3.81.1.1.1.1 |
jnxFabricSourceStatisticsEntryAn entry of fabric source statistics table. JnxFabricSourceStatisticsEntry .1.3.6.1.4.1.2636.3.81.1.1.1.1.1 |
jnxFabricSourceTypeSource fabric type. JnxFabricType .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.1 |
jnxFabricSourceSlotDenotes plane number for switch-fabric / slot number for linecard. If there is no per plane statistics available, then it shall be 65535. Integer32 (0..1023 | 65535) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.2 |
jnxFabricSourcePfeDenotes pfe number. It is applicable only when source type is linecard and shall be 65535 for switch-fabric. Integer32 (0..8191 | 65535) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.3 |
jnxFabricDestinationTypeDestination fabric type. JnxFabricType .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.4 |
jnxFabricDestinationSlotDenotes plane number for switch-fabric / slot number for linecard. If there is no per plane statistics available, then it shall be 65535. Integer32 (0..1023 | 65535) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.5 |
jnxFabricDestinationPfeDenotes pfe number. It is applicable only when destination type is linecard and shall be 65535 for switch-fabric. Integer32 (0..8191 | 65535) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.6 |
jnxFabricSourceStatisticsPriorityStatistics priority. JnxFabricStatisticsPriority .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.7 |
jnxFabricSourceStatisticsPacketsNumber of packets transmitted for a source.ro Counter64 .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.8 |
jnxFabricSourceStatisticsBytesNumber of bytes transmitted for a source.ro Counter64 .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.9 |
jnxFabricSourceStatisticsPpsRate of transmission in packets per second for a source.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.10 |
jnxFabricSourceStatisticsBpsRate of transmission in bytes per second for a source.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.11 |
jnxFabricSourceStatisticsDropPacketsNumber of packets dropped for a source.ro Counter64 .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.12 |
jnxFabricSourceStatisticsDropBytesNumber of bytes dropped for a source.ro Counter64 .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.13 |
jnxFabricSourceStatisticsDropPpsDrop rate in packets per second for a source.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.14 |
jnxFabricSourceStatisticsDropBpsDrop rate in bytes per second for a source.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.15 |
jnxFabricSourceStatisticsQueueDepthAverageAverage queue depth, if applicable for a source type. Else it shall be 0.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.16 |
jnxFabricSourceStatisticsQueueDepthCurrentCurrent queue depth, if applicable for a source type. Else it shall be 0.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.17 |
jnxFabricSourceStatisticsQueueDepthPeakPeak queue depth, if applicable for a source type. Else it shall be 0.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.18 |
jnxFabricSourceStatisticsQueueDepthMaximumMaximum queue depth, if applicable for a source type. Else it shall be 0.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.19 |
jnxFabricSourceStatisticsErrorPacketsNumber of errror packets for a source.ro Counter64 .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.20 |
jnxFabricSourceStatisticsErrorPpsError rate in packets per second for a source.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.81.1.1.1.1.1.21 |
More MIBs from Juniper Networks
Browse all Juniper NetworksMIBs →The JUNIPER-CHASSIS-DEFINES-MIB establishes the foundational Object Identifier (OID) namespace and data type definitions required to map and identify specific Juniper chassis hardware platforms and their internal physical components. This module serves as the structural prerequisite for the JUNIPER-CHASSIS-MIB, enabling the retrieval of inventory data, component status, and hardware topology details for Juniper MX, PTX, and EX series devices.
The JUNIPER-MOBILE-GATEWAY-GTP-MIB provides SNMP objects for monitoring GTP (GPRS Tunneling Protocol) session states, tunnel endpoints, and protocol counters on Juniper mobile gateway platforms. It enables administrators to track GTP-C and GTP-U traffic statistics, error conditions, and active tunnel metrics essential for validating mobile core network connectivity.
SNMP MIB module
SNMP MIB module
The JUNIPER-MOBILE-GATEWAY-SGW-GTP-MIB module enables monitoring of GTP (GPRS Tunneling Protocol) session states and traffic counters on Juniper Mobile Gateway Serving Gateways (SGW). It provides specific objects for tracking GTP-C and GTP-U tunnel establishment, teardown, and packet throughput metrics essential for validating mobile core network connectivity.
The JUNIPER-IPSEC-FLOW-MON-MIB monitors Juniper Networks IPsec VPN infrastructure by exposing tables for IKE tunnels, IPSec tunnels, and IPSec security associations to track tunnel states, association parameters, and flow statistics. This module facilitates the management of IPsec security policies and the operational status of encrypted traffic flows within the device's security architecture.