JUNIPER-DFC-MIB
Updated Jul 8, 2005This is Juniper Networks' implementation of enterprise specific MIB for Dynamic Flow Capture (DFC)
Main OID:
jnxDfc.1.3.6.1.4.1.2636.3.33
78
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
jnxDfcThis is Juniper Networks' implementation of enterprise
specific MIB for Dynamic Flow Capture (DFC) MODULE-IDENTITY .1.3.6.1.4.1.2636.3.33 |
jnxDfcCSTableStatistics information for Control Source. SEQUENCE OF JnxDfcCSEntry .1.3.6.1.4.1.2636.3.33.1 |
jnxDfcCSEntryAn entry of DFC Control Source table. JnxDfcCSEntry .1.3.6.1.4.1.2636.3.33.1.1 |
jnxDfcGrpNameThe name assigned to a DFC group. A DFC group defines a set of DFC
PICs that share same static/dynamic
configuration. DisplayString .1.3.6.1.4.1.2636.3.33.1.1.1 |
jnxDfcCSIdControl Source identifier. Control Source identifies Juniper router
with one unique Control IP address. There can be multiple IP
addresses from which a Control Source can send Control protocol
request to Juniper router. DisplayString .1.3.6.1.4.1.2636.3.33.1.1.2 |
jnxDfcCSControlProtocolAddRequestsTotal number of Control protocol Add requests received. The add
request specifies a new filter criteria to be merged with the
existing tasking list for a given Control Source and Content
Destination.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.3 |
jnxDfcCSCriteriaAddedTotal number of filter criteria added successfully by the Control
Source.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.4 |
jnxDfcCSCriteriaAdditionFailedTotal number of filter criteria addition failed.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.5 |
jnxDfcCSControlProtocolDeleteRequestsTotal number of Control protocol delete requests received. The
delete request removes a particular filter criterion.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.6 |
jnxDfcCSCriteriaDeletedTotal number of filter criteria deleted successfully as requested
by Control Source.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.7 |
jnxDfcCSCriteriaDeletionFailedTotal number of filter criteria deletion failed.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.8 |
jnxDfcCSCriteriaDeletedTimeoutIdleTotal number of criteria deleted by timeout idle.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.9 |
jnxDfcCSCriteriaDeletedTimeoutTotalTotal number of criteria deleted by timeout total.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.10 |
jnxDfcCSCriteriaDeletedPacketsTotal number of criteria deleted by packets.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.11 |
jnxDfcCSCriteriaDeletedBytesTotal number of criteria deleted by bytes.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.12 |
jnxDfcCSControlProtocolRefreshRequestsTotal number of Control protocol Refresh requests received. The
refresh request updates the timeout for a particular filter
criterion or set of filter criteria for the particular Control
Source to a particular Content Destination.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.13 |
jnxDfcCSCriteriaRefreshedTotal number of filter criteria refreshed successfully as requested
by Control Source.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.14 |
jnxDfcCSCriteriaRefreshFailedTotal number of filter criteria refresh request failed.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.15 |
jnxDfcCSControlProtocolListRequestsTotal number of Control protocol List requests received. The List
request returns a list of all criteria that a particular Control
Source has added and are currently active.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.16 |
jnxDfcCSListSuccessTotal number of list commands processed successfully as requested
by Control Source.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.17 |
jnxDfcCSListFailedTotal number of list commands that could not be processed
successfully.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.18 |
jnxDfcCSControlProtocolNoopRequestsTotal number of Control protocol Noop requests received. The purpose
of this request is to verify the end-to-end connectivity between
Control Source and DFC PIC.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.19 |
jnxDfcCSNoopSuccessTotal number of Noop requests processed successfully as requested by
Control Source.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.20 |
jnxDfcCSNoopFailedTotal number of Noop requests that could not be processed
successfully.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.21 |
jnxDfcCSDynamicCriteriaActiveTotal number of active dynamic filter criteria.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.22 |
jnxDfcCSStaticCriteriaActiveTotal number of active static filter criteria.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.23 |
jnxDfcCSBadRequestTotal number of Bad requests received.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.24 |
jnxDfcCSResponseSuccessfulTotal number of successful response(s) corresponding to the
requests (add, delete, refresh, list and noop) sent out to the
Control Source.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.25 |
jnxDfcCSResponseImproperCriteriaTotal number of response(s) generated because of improper filter
criterion specification in the add request.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.26 |
jnxDfcCSResponseUnknownContentDestTotal number of response(s) generated because of unknown Content
Destination specified in the add, delete, refresh and list
request.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.27 |
jnxDfcCSResponseUnknownCriteriaIdTotal number of response(s) generated because of unknown Criteria
Identifier specified in the delete, refresh and list request.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.28 |
jnxDfcCSResponseImproperTimeoutTotal number of response(s) generated because of improper timeout
specified in the add and refresh request.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.29 |
jnxDfcCSResponseInvalidAuthenticationTotal number of response(s) generated because of invalid
authentication specified in the add, delete, refresh, list and
noop request.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.30 |
jnxDfcCSResponseInvalidSequenceNumberTotal number of response(s) generated because of invalid Sequence
Number specified in the add, delete, refresh, list and noop
request.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.31 |
jnxDfcCSResponseInternalErrorTotal number of response(s) generated because of internal error at
the DFC PIC in processing a request.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.32 |
jnxDfcCSNotificationRestartTotal number of Restart notifications sent to configured
notification-recipients. This notification will be generated when
the system experiences a failure such that all the DFC filter
criteria are lost.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.33 |
jnxDfcCSNotificationRolloverTotal number of Rollover notifications sent to configured
notification-recipients. This notification will be generated when
the DFC PIC experiences a sequence number rollover.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.34 |
jnxDfcCSNotificationNoopTotal number of Noop notifications sent to configured
notification-recipents. This notification will be generated when
the DFC PIC receives a Noop message with the SendAsync parameter
present.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.35 |
jnxDfcCSNotificationTimeoutTotal number of Timeout notifications sent to configured
notification-recipents. This notification will be generated when
the DFC PIC times out a filter criterion on any one of its
configured timeout parameters and the criterion contains a
SendTimeoutAsync parameter.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.36 |
jnxDfcCSNotificationCongestionTotal number of Congestion notifications sent to configured
notification-recipents. This notification will be generated when
the 10-second average packet forwarding rate (in bits/second)
summed over all active filter criteria to a configured Content
Destination exceeds the configured soft limit for that destination.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.37 |
jnxDfcCSNotificationCongestionDeleteTotal number of Congestion Delete notifications sent to configured
notification-recipents. This notification will be generated when
the total 10-second average packet forwarding rate (in bits/second)
summed over all active filter criteria to a configured Content
Destination exceeds the configured hard limit for that
destination.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.38 |
jnxDfcCSNotificationDuplicatesDroppedTotal number of Duplicates Dropped notifications sent to configured
notification-recipents. This notification will be generated when
the configurable Maximum Duplicates parameter has been exceeded in
such a way as to cause packets matching criteria added by the
corresponding Control Source to be dropped.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.39 |
jnxDfcCSAddRequestRateThe request processing rate (requests processed/second).ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.40 |
jnxDfcCSAddRequestPeakRateThe peak request processing rate (requests processed/second).ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.41 |
jnxDfcCSAggrCriteriaBandwidthBandwidth in bits/second.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.42 |
jnxDfcCSSequenceNumberProtocol sequence number.ro Counter64 .1.3.6.1.4.1.2636.3.33.1.1.43 |
jnxDfcCDTableStatistics information for content destination. SEQUENCE OF JnxDfcCDEntry .1.3.6.1.4.1.2636.3.33.2 |
jnxDfcCDEntryAn entry of DFC Content-Destination table. JnxDfcCDEntry .1.3.6.1.4.1.2636.3.33.2.1 |
jnxDfcCDIdContent Destination identifier. A Content Destination is the
recipient of the extracted data, once it is forwarded by the
Server. DisplayString .1.3.6.1.4.1.2636.3.33.2.1.1 |
jnxDfcCDCriteriaTotal number of filter criteria configured for the Content
Destination.ro Counter64 .1.3.6.1.4.1.2636.3.33.2.1.2 |
jnxDfcCDByteRateAverage data rate (in bytes/second) summed over all active
filter criteria to a configured Content Destination.ro Counter64 .1.3.6.1.4.1.2636.3.33.2.1.3 |
jnxDfcCDMatchedPacketsTotal number of packets matching the filter criteria configured for
the Content Destination.ro Counter64 .1.3.6.1.4.1.2636.3.33.2.1.4 |
jnxDfcCDMatchedBytesTotal number of bytes matching the filter criteria configured for
the Content Destination.ro Counter64 .1.3.6.1.4.1.2636.3.33.2.1.5 |
jnxDfcCDCongestionNotificationTotal number of Congestion Notifications sent to a configured
notification-recipient.ro Counter64 .1.3.6.1.4.1.2636.3.33.2.1.6 |
jnxDfcNotifyVarsNotification object definitions. OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.33.3 |
jnxDfcInterfaceNameThe textual name of the DFC interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.33.3.1 |
jnxDfcInputPktRatedata packet rate (in packets per second).ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.2 |
jnxDfcPpsSoftOverloadLowWatermarkConfigured lowest value for data packet rate (in packets
per second).ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.3 |
jnxDfcPpsSoftOverloadHighWatermarkConfigured highest value for data packet rate (in packets
per second).ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.4 |
jnxDfcPpsHardOverloadLowWatermarkRecommended lowest value for data packet rate (in packets
per second).ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.5 |
jnxDfcPpsHardOverloadHighWatermarkRecommended highest value for data packet rate (in packets
per second).ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.6 |
jnxDfcFlowsUsage% usage of total number of flows in system.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.33.3.7 |
jnxDfcCriteriaUsage% usage of matching criteria for all filters.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.33.3.8 |
jnxDfcMemSoftOverloadLowWatermarkConfigured lowest watermark percent for memory load.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.33.3.9 |
jnxDfcMemSoftOverloadHighWatermarkConfigured highest watermark percent for memory load.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.2636.3.33.3.10 |
jnxDfcFlowLowWatermarkRecommended lowest value for number of flows allowed in
the system.ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.11 |
jnxDfcFlowHighWatermarkRecommended highest value for number of flows allowed in
the system.ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.12 |
jnxDfcCriteriaLowWatermarkRecommended lowest value for number of criterias allowed
in the system.ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.13 |
jnxDfcCriteriaHighWatermarkRecommended highest value for number of criterias allowed
in the system.ro Unsigned32 .1.3.6.1.4.1.2636.3.33.3.14 |
jnxDfcNotificationPrefixAll DFC notifications are registered under this branch. OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.11.0 |
jnxDfcSoftPpsThresholdExceededNotification of input packet rate (in packet per second)
going beyond the configured limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.11.0.1 |
jnxDfcSoftPpsUnderThresholdNotification of input packet rate (in packet per second)
dropping back to below the configured limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.11.0.2 |
jnxDfcHardPpsThresholdExceededNotification of input packet rate (in packet per second)
going beyond the recommended limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.11.0.3 |
jnxDfcHardPpsUnderThresholdNotification of input packet rate (in packet per second)
dropping back to below the recommended limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.11.0.4 |
jnxDfcSoftMemThresholdExceededNotification of memory overload condition i.e memory usage
is going beyond the configured limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.11.0.5 |
jnxDfcSoftMemUnderThresholdNotification of memory usage dropping back to below the
configured limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.11.0.6 |
jnxDfcHardMemThresholdExceededNotification of memory overload condition i.e memory usage
is going beyond the recommended limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.11.0.7 |
jnxDfcHardMemUnderThresholdNotification of memory usage dropping back to below the
recommended limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.11.0.8 |