JUNIPER-COLLECTOR-MIB
Updated Nov 13, 2003AI MIB Summary
The JUNIPER-COLLECTOR-MIB monitors operational status, traffic statistics, and hardware health metrics for Juniper Networks router Line Interface Cards (PICs) dedicated to packet collection functions. It provides granular visibility into collector-specific counters, interface states, and resource utilization to facilitate fault isolation and capacity planning for high-volume traffic aggregation hardware.
Provides data about each of the Collector PICs on a router.
Main OID:
jnxCollectorMIB.1.3.6.1.4.1.2636.3.28
79
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
79 total| Object Name |
|---|
jnxCollectorMIBProvides data about each of the Collector PICs on a router. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.28 |
jnxCollGlobalStatsGlobal, router-wide collector stats. OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.28.1 |
jnxCollGlobalCreatedFilesThe total number of file created by all the
collector pics on the router since the last
time the router was reset.ro Counter64 .1.3.6.1.4.1.2636.3.28.1.1 |
jnxCollGlobalOpenFilesThe total number of open collector files currently
present on the router.ro Counter64 .1.3.6.1.4.1.2636.3.28.1.2 |
jnxCollPicIfTableData about each collector pic currently present
on the router. SEQUENCE OF JnxCollPicEntry .1.3.6.1.4.1.2636.3.28.2 |
jnxCollPicIfEntryEach entry provides information about a single Collector PIC.
Each Collector PIC contains a single interface and is
identified by its ifIndex. JnxCollPicEntry .1.3.6.1.4.1.2636.3.28.2.1 |
jnxCollPicIfCreatedFilesThe total number of files created by this Collector PIC
since the last time the PIC was reset.ro Counter64 .1.3.6.1.4.1.2636.3.28.2.1.1 |
jnxCollPicIfCreatedFileRateThe number of files created per second, measured over the
current 10 second interval.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.2 |
jnxCollPicIfPeakCreatedFileRateThe peak number of files created per second.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.3 |
jnxCollPicIfExportedFilesThe total number of files exported by this Collector PIC.ro Counter64 .1.3.6.1.4.1.2636.3.28.2.1.4 |
jnxCollPicIfExportedFileRateThe number of files exported per second, measured over
the current 10 second interval.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.5 |
jnxCollPicIfPeakExportedFileRateThe peak number of files exported per second.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.6 |
jnxCollPicIfDestroyedFilesThe total number of files destroyed by this Collector PIC.ro Counter64 .1.3.6.1.4.1.2636.3.28.2.1.7 |
jnxCollPicIfDestroyedFileRateThe number of files destroyed per second, as measured over
the current 10 second interval.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.8 |
jnxCollPicIfPeakDestroyedFileRateThe peak number of files destroyed per second.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.9 |
jnxCollPicIfProcRecordsThe total number of flow records processed by this Collector PIC.ro Counter64 .1.3.6.1.4.1.2636.3.28.2.1.10 |
jnxCollPicIfProcRecordsRateThe number of flow records processed per seconds, measured
during the current 10 second interval.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.11 |
jnxCollPicIfPeakProcRecordsRateThe peak number of flow records processed.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.12 |
jnxCollPicIfMemoryUsedThe amount of memory used, in bytes, by this Collector PIC.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.28.2.1.13 |
jnxCollPicIfMemoryFreeThe amount of memory free, in bytes, on this Collector PIC.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.28.2.1.14 |
jnxCollPicIfFtpBytesThe total number of bytes transferred via FTP by this
Collector PIC.ro Counter64 .1.3.6.1.4.1.2636.3.28.2.1.15 |
jnxCollPicIfFtpByteRateThe number of bytes per second transfered via FTP measured
during the current 10 second interval.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.16 |
jnxCollPicIfPeakFtpByteRateThe peak number of bytes per second transferred via FTP.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.17 |
jnxCollPicIfFtpFilesThe total number of files transferred via FTP by this
Collector PIC.ro Counter64 .1.3.6.1.4.1.2636.3.28.2.1.18 |
jnxCollPicIfFtpFileRateThe number of files per second transferred via FTP.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.19 |
jnxCollPicIfPeakFtpFileRateThe peak number of files per second transferred via FTP.ro Gauge32 .1.3.6.1.4.1.2636.3.28.2.1.20 |
jnxCollPicIfFtpFailuresThe total number of FTP transfer failures on this Collector
PIC.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.28.2.1.21 |
jnxCollPicIfCurrentStateThe current state of various error conditions on this
Collector PIC.ro JnxCollPicStateDef .1.3.6.1.4.1.2636.3.28.2.1.22 |
jnxCollPicIfLastStateChangeIdentifies the error condition that last changed state.ro JnxCollPicStateDef .1.3.6.1.4.1.2636.3.28.2.1.23 |
jnxCollPicIfStateChangeTimeThe value of sysUpTime when the management subsystem last
learned of a change to the value of jnxCollPicIfCurrentState
for this Collector PIC.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.28.2.1.24 |
jnxCollPicIfStateChangeDateThe system date and time when the management subsystem last
learned of a change to the value of jnxCollPicIfCurrentState
for this Collector PIC.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.28.2.1.25 |
jnxCollPicIfStateChangeTypeThis indicates whether the last state change set a new
error condition or cleared an existing one.ro Enumeration .1.3.6.1.4.1.2636.3.28.2.1.26 |
jnxCollFileTableData about each collector file currently present
on the router. SEQUENCE OF JnxCollFileEntry .1.3.6.1.4.1.2636.3.28.3 |
jnxCollFileEntryEach entry provides information about a single file currently
open on this Collector PIC. Each Collector PIC File is
identified by the ifIndex associated with the Collector PIC
and the name of the file. JnxCollFileEntry .1.3.6.1.4.1.2636.3.28.3.1 |
jnxCollFileNameThe name of a Collector File on this Collector PIC. DisplayString .1.3.6.1.4.1.2636.3.28.3.1.1 |
jnxCollFileFnameThe name of a Collector File on this Collector PIC. This
object is included for those NM applications that can't
parse the file name from the instance portion of the OIDs
and provides the value of jnxCollFileName explicitly.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.28.3.1.2 |
jnxCollFileRecordsThe number of flow records in this file.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.28.3.1.3 |
jnxCollFileRecordRateThe number of flow records per second added to this file,
measured during the current 10 second interval.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.4 |
jnxCollFilePeakRecordRateThe peak number of flow records per second added to this file.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.5 |
jnxCollFileUncompBytesThe number of uncompressed bytes in this file.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.28.3.1.6 |
jnxCollFileUncompByteRateThe number of uncompressed bytes per second added to this file.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.7 |
jnxCollFilePeakUncompByteRateThe peak number of uncompressed bytes per second added to this
file.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.8 |
jnxCollFileCompBytesThe number of compressed bytes in this file.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2636.3.28.3.1.9 |
jnxCollFileCompByteRateThe number of compressed bytes per second added to this file,
measured during the current 10 second interval.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.10 |
jnxCollFilePeakCompByteRateThe peak number of compressed bytes per second added to this file.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.11 |
jnxCollFileBlocksThe number of blocks in this file.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.12 |
jnxCollFileCompBlocksThe number of compressed blocks in this file.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.14 |
jnxCollFileTransferAttemptsThe number of FTP transfer attempts for this file.ro Gauge32 .1.3.6.1.4.1.2636.3.28.3.1.15 |
jnxCollFileStateThe current state of this file.ro Enumeration .1.3.6.1.4.1.2636.3.28.3.1.16 |
jnxCollNotifyVarsNotification object definitions. OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.28.4 |
jnxCollNotifyUrlThe URL associated with a file transfer destination.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.28.4.1 |
jnxCollNotifyInetTypeUsed with jnxCollNotifyInetAddress to identify a specific
file transfer destination.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.28.4.2 |
jnxCollNotifyInetAddressUsed with jnxCollNotifyInetType to identify a specific
file transfer destination.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.28.4.3 |
jnxCollNotifyErrorDescription of error encountered when trying to transfer a file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.28.4.4 |
jnxCollNotifyFileIdentifies a specific file for notifications that refer to a file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.28.4.5 |
jnxCollNotifyFtpResultCodeProvides the FTP result code for file transfer notifications.ro Integer32 .1.3.6.1.4.1.2636.3.28.4.6 |
jnxCollNotifyFtpErrorTextProvides the FTP error text for file transfer notifications.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.28.4.7 |
jnxCollNotifyMemUtilProvides the current memory utilization for pic overload
notifications.ro Gauge32 .1.3.6.1.4.1.2636.3.28.4.8 |
jnxCollNotifyMemFreeProvides the current amount of free memory for pic overload
notifications.ro Gauge32 .1.3.6.1.4.1.2636.3.28.4.9 |
jnxCollNotifyMemThreshProvides the current memory threshold used for determining
memory unavailable conditions.ro Gauge32 .1.3.6.1.4.1.2636.3.28.4.10 |
jnxCollNotifyNewRecordRateProvides the current number of new records per second created
on this Collector PIC.ro Gauge32 .1.3.6.1.4.1.2636.3.28.4.11 |
jnxCollNotifyOverloadTypeIdentifies a specific type of flow overload condition
on this Collector PIC.ro Enumeration .1.3.6.1.4.1.2636.3.28.4.12 |
jnxCollNotifyDateProvides the current system date and time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.28.4.13 |
jnxCollNotifyFromFtpServerInetTypeUsed with jnxCollNotifyFromFtpServerInetAddress to identify
a specific FTP server address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.28.4.14 |
jnxCollNotifyFromFtpServerInetAddressThe FTP server address from which the switchover occurs.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.28.4.15 |
jnxCollNotifyFromFtpServerTypeThe FTP server Type from which the switchover occurs.ro Enumeration .1.3.6.1.4.1.2636.3.28.4.16 |
jnxCollNotifyToFtpServerInetTypeUsed with jnxCollNotifyToFtpServerInetAddress to identify
a specific FTP server address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.28.4.17 |
jnxCollNotifyToFtpServerInetAddressThe FTP server address to which the switchover occurs.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.3.28.4.18 |
jnxCollNotifyToFtpServerTypeThe FTP server Type to which the switchover occurs.ro Enumeration .1.3.6.1.4.1.2636.3.28.4.19 |
jnxCollNotifyInitiatedByIdentify what initiates the FTP switchover.ro Enumeration .1.3.6.1.4.1.2636.3.28.4.20 |
jnxCollNotificationPrefixAll collector notifications are registered under this branch. OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.8.0 |
jnxCollUnavailableDestNotification of an unavailable destination failure encountered
while transferring a collector file. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.8.0.1 |
jnxCollUnavailableDestClearedThis indicates a previous unavailable destination failure
has been resolved. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.8.0.2 |
jnxCollUnsuccessfulTransferThis indicates an error was encountered while attempting
a file transfer. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.8.0.3 |
jnxCollFlowOverloadThis indicates a soft or hard flow overload condition has been
triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.8.0.4 |
jnxCollFlowOverloadClearedThis indicates a soft or hard flow overload condition has been
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.8.0.5 |
jnxCollMemoryUnavailableThis indicates a memory unavailable condition has been
triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.8.0.6 |
jnxCollMemoryAvailableThis indicates a memory unavailable condition has been
cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.8.0.7 |
jnxCollFtpSwitchoverThis indicates an FTP server switchover has occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.8.0.8 |