JUNIPER-CFGMGMT-MIB
Updated Oct 24, 2003The JUNIPER-CFGMGMT-MIB provides SNMP objects for retrieving and modifying the operational configuration state of Juniper Networks devices, including interface definitions, routing protocol parameters, and system settings. This module enables network management systems to programmatically query device configuration files and apply changes to active Junos OS configurations without requiring CLI access.
Imported Objects
Objects
25 total| Object Name |
|---|
jnxCfgMgmtThis MIB module defines objects used for managing the
configuration of Juniper products. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.18 |
jnxCmCfgChg OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.18.1 |
jnxCmCfgChgLatestIndexThe index in jnxCmCfgChgEventTable for the latest configuration
change event.ro Integer32 .1.3.6.1.4.1.2636.3.18.1.1 |
jnxCmCfgChgLatestTimeThe value of sysUpTime when the configuration was last
changed.
If the management subsystem was reset after the last
configuration change, this object will return 0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.18.1.2 |
jnxCmCfgChgLatestDateThe date and time when the configuration was last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.18.1.3 |
jnxCmCfgChgLatestSourceThe source of the configuration event.ro JnxCmCfChgSource .1.3.6.1.4.1.2636.3.18.1.4 |
jnxCmCfgChgLatestUserThe name of the logged in user. The length is zero if
not available or not applicable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.18.1.5 |
jnxCmCfgChgMaxEventEntriesThe maximum number of entries that can be held in
jnxCmCfgChgEventTable.ro Integer32 .1.3.6.1.4.1.2636.3.18.1.6 |
jnxCmCfgChgEventTableA table of configuration events on this router. SEQUENCE OF JnxCmCfgChgEventEntry .1.3.6.1.4.1.2636.3.18.1.7 |
jnxCmCfgChgEventEntryInformation about a configuration event on this router. JnxCmCfgChgEventEntry .1.3.6.1.4.1.2636.3.18.1.7.1 |
jnxCmCfgChgEventIndexThis object identifies a specific configuration change
event. Monotonically increasing values will be assigned
by the snmp subsystem to each event as it occurs. If the
snmp subsystem is reset, these index values will be reset
as well. Integer32 .1.3.6.1.4.1.2636.3.18.1.7.1.1 |
jnxCmCfgChgEventTimeThe value of sysUpTime when the event occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.18.1.7.1.2 |
jnxCmCfgChgEventDateThe system date and time when the event occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.18.1.7.1.3 |
jnxCmCfgChgEventSourceThe source of the configuration event.ro JnxCmCfChgSource .1.3.6.1.4.1.2636.3.18.1.7.1.4 |
jnxCmCfgChgEventUserThe name of the logged in user. The length is zero if
not available or not applicable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.18.1.7.1.5 |
jnxCmCfgChgEventLogThe log of the configuration event. The length is zero
if not available.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.18.1.7.1.6 |
jnxCmRescueChg OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.18.2 |
jnxCmRescueChgTimeThe value of sysUpTime when the rescue configuration was
last changed.
If the management subsystem was reset after the last
configuration change, this object will return 0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.18.2.1 |
jnxCmRescueChgDateThe date and time when the rescue configuration was last
changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.18.2.2 |
jnxCmRescueChgSourceThe source of the rescue configuration event.ro JnxCmCfChgSource .1.3.6.1.4.1.2636.3.18.2.3 |
jnxCmRescueChgUserThe name of the logged in user. The length is zero if
not available or not applicable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.18.2.4 |
jnxCmRescueChgStateThe current state of the rescue configuration.ro JnxCmRescueCfgState .1.3.6.1.4.1.2636.3.18.2.5 |
jnxCmNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.5.0 |
jnxCmCfgChangeNotification of a configuration management event as
recorded in jnxCmCfgChgEventTable. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.5.0.1 |
jnxCmRescueChangeNotification of the latest rescue configuration
change. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.5.0.2 |
More MIBs from Juniper Networks
Browse all Juniper NetworksMIBs →The JUNIPER-CHASSIS-DEFINES-MIB establishes the foundational Object Identifier (OID) namespace and data type definitions required to map and identify specific Juniper chassis hardware platforms and their internal physical components. This module serves as the structural prerequisite for the JUNIPER-CHASSIS-MIB, enabling the retrieval of inventory data, component status, and hardware topology details for Juniper MX, PTX, and EX series devices.
The JUNIPER-MOBILE-GATEWAY-GTP-MIB provides SNMP objects for monitoring GTP (GPRS Tunneling Protocol) session states, tunnel endpoints, and protocol counters on Juniper mobile gateway platforms. It enables administrators to track GTP-C and GTP-U traffic statistics, error conditions, and active tunnel metrics essential for validating mobile core network connectivity.
SNMP MIB module
SNMP MIB module
The JUNIPER-MOBILE-GATEWAY-SGW-GTP-MIB module enables monitoring of GTP (GPRS Tunneling Protocol) session states and traffic counters on Juniper Mobile Gateway Serving Gateways (SGW). It provides specific objects for tracking GTP-C and GTP-U tunnel establishment, teardown, and packet throughput metrics essential for validating mobile core network connectivity.
The JUNIPER-IPSEC-FLOW-MON-MIB monitors Juniper Networks IPsec VPN infrastructure by exposing tables for IKE tunnels, IPSec tunnels, and IPSec security associations to track tunnel states, association parameters, and flow statistics. This module facilitates the management of IPsec security policies and the operational status of encrypted traffic flows within the device's security architecture.