JUNIPER-BFD-MIB
Updated Oct 12, 2006Imported Objects
Objects
14 total| Object Name |
|---|
jnxBfdMibProvides BFD specific data. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.45.1 |
jnxBfdNotification OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.45.1.0 |
jnxBfdSessTxIntervalHighThis notification is generated when the threshold value for
transmit interval (jnxBfdSessThreshTxInterval) is set and
the bfd session transmit interval (jnxBfdSessCurrTxInterval)
adapts to a value greater than the threshold value. This trap
is sent only once, when we first exceed the threshold. The
transmit interval can continue to adapt beyond the threshold
value. Adaptation of transmit interval happens due to network
issues causing the BFD session to go down on either the local
system or the remote neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.45.1.0.1 |
jnxBfdSessDetectionTimeHighThis notification is generated when the threshold value for
detection time (jnxBfdSessThreshDectTime) is set and the bfd
session detection-time (jnxBfdSessCurrDectTime) adapts to a
value greater than the threshold value. This trap is sent only
once, when we first exceed the threshold. The detection-time
can continue to adapt beyond the threshold value. Adaptation
of detection-time happens due to network issues causing the
BFD session to go down on either the local system or the remote
neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.45.1.0.2 |
jnxBfdObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.45.1.1 |
jnxBfdSessTableDefines the jnxBfd Session Table for providing enterprise
specific options to the corresponding bfdSessTable entry. SEQUENCE OF JnxBfdSessEntry .1.3.6.1.4.1.2636.3.45.1.1.1 |
jnxBfdSessEntryDefines an entry in the jnxBfdSessTable. This essentially
augments the bfdSessTable with additional objects. JnxBfdSessEntry .1.3.6.1.4.1.2636.3.45.1.1.1.1 |
jnxBfdSessThreshTxIntervalThe threshold value for transmit interval in microseconds.
If the current transmit interval value adapts to a value
greater than the threshold value, jnxBfdSessTxIntervalHigh
trap is raised.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.2636.3.45.1.1.1.1.1 |
jnxBfdSessCurrTxIntervalThe current transmit interval in microseconds.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.2636.3.45.1.1.1.1.2 |
jnxBfdSessThreshDectTimeThe threshold value for detection time in microseconds.
If the current detection time value is greater than the
threshold value at the time when session state changes
to up(1), jnxBfdSessDetectionTimeHigh trap is raised.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.2636.3.45.1.1.1.1.3 |
jnxBfdSessCurrDectTimeThe actual value of detection time for the session.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.2636.3.45.1.1.1.1.4 |
jnxBfdSessIntfNameThis object specifies the interface associated with
the bfd sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.45.1.1.1.1.5 |
jnxBfdNotifyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.45.1.2 |
jnxBfdSessifNameThis object gives the Interface Name in the bfdSessUp and
bfdSessDown trap. Even though this object doesnt appear in
the OBJECTS list of these traps, but the agent relay this
information as an extra parameter in the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2636.3.45.1.2.1 |
More MIBs from Juniper Networks
Browse all Juniper NetworksMIBs →The JUNIPER-CHASSIS-DEFINES-MIB establishes the foundational Object Identifier (OID) namespace and data type definitions required to map and identify specific Juniper chassis hardware platforms and their internal physical components. This module serves as the structural prerequisite for the JUNIPER-CHASSIS-MIB, enabling the retrieval of inventory data, component status, and hardware topology details for Juniper MX, PTX, and EX series devices.
The JUNIPER-MOBILE-GATEWAY-GTP-MIB provides SNMP objects for monitoring GTP (GPRS Tunneling Protocol) session states, tunnel endpoints, and protocol counters on Juniper mobile gateway platforms. It enables administrators to track GTP-C and GTP-U traffic statistics, error conditions, and active tunnel metrics essential for validating mobile core network connectivity.
SNMP MIB module
SNMP MIB module
The JUNIPER-MOBILE-GATEWAY-SGW-GTP-MIB module enables monitoring of GTP (GPRS Tunneling Protocol) session states and traffic counters on Juniper Mobile Gateway Serving Gateways (SGW). It provides specific objects for tracking GTP-C and GTP-U tunnel establishment, teardown, and packet throughput metrics essential for validating mobile core network connectivity.
The JUNIPER-IPSEC-FLOW-MON-MIB monitors Juniper Networks IPsec VPN infrastructure by exposing tables for IKE tunnels, IPSec tunnels, and IPSec security associations to track tunnel states, association parameters, and flow statistics. This module facilitates the management of IPsec security policies and the operational status of encrypted traffic flows within the device's security architecture.