InternetThruway-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for InternetThruway-MIB.
424
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
424 total| Object Name |
|---|
nortel OBJECT IDENTIFIER .1.3.6.1.4.1.562 |
RFC1213-MIB Unknown .1.3.6.1.4.1.562 |
dialaccess OBJECT IDENTIFIER .1.3.6.1.4.1.562.14 |
csg OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.1 |
disk OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.1.1 |
partitionTableThe PartitionTable contains information about each disk
partition on the CSG SEQUENCE OF PartitionTableEntry .1.3.6.1.4.1.562.14.2.1.1.1 |
partitionTableEntryAn entry in the PartitionTable. Indexed by partitionIndex PartitionTableEntry .1.3.6.1.4.1.562.14.2.1.1.1.1 |
partitionIndexIdentifies partition number. INTEGER .1.3.6.1.4.1.562.14.2.1.1.1.1.1 |
partitionNameIdentifies partition name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.1.1.1.1.2 |
partitionPercentFullIndicates (in Percent) how full the disk is.ro INTEGER .1.3.6.1.4.1.562.14.2.1.1.1.1.3 |
partitionMegsFreeIndicates how many Megabytes are free on the partition.ro INTEGER .1.3.6.1.4.1.562.14.2.1.1.1.1.4 |
partitionSpaceStatusIndicates if there is currently a space alarm in progress.ro PartitionSpaceStatus .1.3.6.1.4.1.562.14.2.1.1.1.1.5 |
partitionSpaceKeyUnique indicator for the partition space alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.1.1.1.1.6 |
partitionSpaceTimeStampIndicates the time of the last partitionSpaceStatus transition.ro TimeString .1.3.6.1.4.1.562.14.2.1.1.1.1.7 |
components OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.2 |
componentTableThe ComponentTable contains information about all the
Components that should be running on the CSG. SEQUENCE OF ComponentTableEntry .1.3.6.1.4.1.562.14.2.2.10 |
componentTableEntryAn entry in the ComponentTable. componentTable entries
are indexed by componentIndex, which is an integer. ComponentTableEntry .1.3.6.1.4.1.562.14.2.2.10.1 |
componentIndexIdentifies the component entry with an enumerated list. ComponentIndex .1.3.6.1.4.1.562.14.2.2.10.1.1 |
componentNameIdentifies component name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.2.10.1.2 |
compSecsInCurrentStateIndicates how many seconds a component has been running in its
current state.ro INTEGER .1.3.6.1.4.1.562.14.2.2.10.1.3 |
compProvStateStatusIndicates the current state of the particular CSG component.
The states are one of the following:
inProvisionedState(1), notInProvisionedState(2), unknown(3)ro ComponentSysmanState .1.3.6.1.4.1.562.14.2.2.10.1.4 |
compProvStateKeyUnique indicator for the prov state alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.2.10.1.5 |
compProvStateTimeStampIndicates the time of the last state transition.ro TimeString .1.3.6.1.4.1.562.14.2.2.10.1.6 |
compDebugStatusShows if the component is running with debug on.ro INTEGER .1.3.6.1.4.1.562.14.2.2.10.1.7 |
compDebugKeyUnique indicator for the debug state.ro INTEGER .1.3.6.1.4.1.562.14.2.2.10.1.8 |
compDebugTimeStampIndicates the time of the last debug transition.ro TimeString .1.3.6.1.4.1.562.14.2.2.10.1.9 |
compRestartStatusShows if the component has had multiple restarts recently.ro INTEGER .1.3.6.1.4.1.562.14.2.2.10.1.10 |
compRestartKeyUnique indicator for the multi-restart of components.ro INTEGER .1.3.6.1.4.1.562.14.2.2.10.1.11 |
compRestartTimeStampIndicates the time of the last restart flagging.ro TimeString .1.3.6.1.4.1.562.14.2.2.10.1.12 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.3 |
diskSpaceClearThe Trap generated when a disk partition has a space increase
after a previously sent DiskSpaceAlarm. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.1001 |
diskSpaceAlarmThe Trap generated when a disk partition is running out of space
provisioned state. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.1004 |
etherCardTrapClearThe Trap generated when the external ethernet card becomes available. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.1011 |
etherCardTrapMajorThe Trap generated when the external ethernet card is down. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.1014 |
etherCardTrapCriticalThe Trap generated when the external ethernet card is down. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.1015 |
compDebugOffThe Trap generated when a Component turns off its debug info. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.2001 |
compDebugOnThe Trap generated when a Component turns on its debug info. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.2002 |
compStateClearThe Trap generated when a component goes to its provisioned
states after a CompStatusAlarm trap has been sent. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.2011 |
compStateAlarmThe Trap generated when a component is not in it's
provisioned state. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.2014 |
restartStateClearThe Trap generated when a component goes to its provisioned
states after a RestartStateAlarm trap has been sent. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.2021 |
restartStateAlarmThe Trap generated when a component restarts repeatedly. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.2024 |
ss7LinkFailureClearTrap generated to clear an SS7 link failure. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3001 |
ss7LinkFailureAlarmTrap generated for an SS7 link failure. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3004 |
ss7LinkCongestionClearTrap generated to indicate there is no longer congestion on
an SS7 link. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3011 |
ss7LinkCongestionAlarmTrap generated for congestion on an SS7 Link. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3012 |
ss7ISUPFailureClearTrap generated to clear an ISUP failure alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3021 |
ss7ISUPFailureAlarmTrap generated to indicate ISUP failure. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3025 |
ss7ISUPCongestionClearTrap generated to indicate there is no longer congestion with
the ISUP protocol stack. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3031 |
ss7ISUPCongestionAlarmTrap generated to indicate congestion with the ISUP protocol
stack. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3033 |
ss7FEPCongestionWarningNotification trap generated to indicate congestion encountered
by the SS7 front-end process. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3042 |
ss7BEPCongestionWarningNotification trap generated to indicate congestion encountered
by the SS7 back-end process. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3052 |
ss7MTP3CongestionClearTrap generated to indicate there is no longer MTP3 congestion. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3061 |
ss7MTP3CongestionMinorTrap generated for MTP3 congestion. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3063 |
ss7MTP3CongestionMajorTrap generated for MTP3 congestion. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3064 |
ss7MTP3CongestionCriticalTrap generated for MTP3 congestion. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3065 |
ss7MTP2TrunkFailureClearTrap generated to clear an MTP2 trunk failure alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3071 |
ss7MTP2TrunkFailureAlarmTrap generated to indicate an MTP2 trunk failure condition. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3075 |
ss7LinksetFailureClearTrap generated to clear a linkset failure alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3081 |
ss7LinksetFailureAlarmTrap generated to indicate a linkset failure. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3085 |
ss7DestinationAccessibleTrap generated to clear a destination inacessible alarm. An
inaccessible signalling destination is considered accessible
once Transfer Allowed (TFA) messages are sent along its
prohibited signalling routes. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3091 |
ss7DestinationInaccessibleTrap generated to indicate that a signalling destination
is inaccessible. A destination is considered inaccessible
once Transfer Prohibited (TFP) messages are received which
indicate that the route to that destination is prohibited. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3092 |
ss7DestinationCongestedClearTrap generated to indicate that there is no longer
congestion at an SS7 destination. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3101 |
ss7DestinationCongestedAlarmTrap generated to indicate congestion at an SS7
destination. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3103 |
ss7LinkAlignmentFailureClearTrap generated to clear a datalink alignment failure
alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3111 |
ss7LinkAlignmentFailureAlarmTrap generated to indicate alignment failure on a
datalink. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.3114 |
ncFoundServerTrapThis trap is generated when the initially comes into contact
with or regains contact with its peer in the cluster. The variables
in this trap identify the server that has been found. The
originator of this trap is implicitly defined. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.4011 |
ncLostServerTrapThis trap is generated when the CSG loses contact with
its peer in the cluster. The variables in this trap identify
the server that has been lost. The originator of this trap is
implicitly defined. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.4014 |
ncStateChangeTrapThis trap is generated when any of the state values change. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.4022 |
csgComplexStateTrapClearThis trap is generated when any of the state values change
Severity is determined only by the operational and standby states
of both servers. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.4031 |
csgComplexStateTrapMajorThis trap is generated when any of the state values change
Severity is determined only by the operational and standby states
of both servers. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.4034 |
csgComplexStateTrapCriticalThis trap is generated when any of the state values change
Severity is determined only by the operational and standby states
of both servers. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.4035 |
cisRetrievalFailureTrapMajorThis trap is generated when the TruCluster ASE information
retrieval attempts failed repeatedly. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.4044 |
genericNormalThe Trap generated for generic normal priority text messages TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9001 |
genericWarningThe Trap generated for generic warning priority text messages TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9002 |
genericMinorThe Trap generated for generic minor priority text messages TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9003 |
genericMajorThe Trap generated for generic major priority text messages TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9004 |
genericCriticalThe Trap generated for generic critical priority text messages TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9005 |
hgStatusClearThe Trap generated when a Home Gateway Status returns to
normal after having previously been in the failed status. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9011 |
hgStatusAlarmThe Trap generated when a Home Gateway is indicated to be failed. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9014 |
nasStatusClearThe Trap generated when a rapport registers after
having previously been in the failed status. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9021 |
nasStatusAlarmThe Trap generated when a Nas is indicated to be failed. TRAP-TYPE .1.3.6.1.4.1.562.14.2.3.0.9024 |
trapCompNameOID for the Component name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.3.1 |
trapFileNameOID for file Name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.3.2 |
trapDateOID for the date. TimeString .1.3.6.1.4.1.562.14.2.3.3 |
trapGenericStr1OID for the generic data. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.3.4 |
trapIdKeyOID for the identification key. INTEGER .1.3.6.1.4.1.562.14.2.3.5 |
trapIPAddressOID for IP address. IpAddress .1.3.6.1.4.1.562.14.2.3.6 |
trapNameOID for configured name associated with an IpAddress. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.3.7 |
trapTimeStampIndicates the time at which the alarm occurred. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.3.8 |
alarms OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.4 |
alarmMaskInt1The value of this bit mask reflects the current filtering policy
of CSG events and alarms. Management stations which wish to not
receive certain events or alarm types from the CSG can modify
this value as needed. Note, however, that changes in the
filtration policy affect what is received by all management
stations.
Initially, the bit mask is set so that all bits are in a false
state. Each bit in a true state reflects a currently filtered
event, alarm, or alarm type.
The actual bit position meanings are given below. Bit 0 is LSB.
Bits
0 = Generic Normal Alarm
1 = Generic Warning Alarm
2 = Generic Minor Alarm
3 = Generic Major Alarm
4 = Generic Critical Alarm
5 = Partition Space Alarm
6 = Home Gateway Failure Alarm
7 = Component Not In Provisioned State Alarm
8 = Component Debug On Alarm
9 = Component Multiple Restart Alarm
10 = Component Restart Warning
11 = NAS Registration Failure Warning
12 = NAS Failure Alarm
13 = File Deletion Warning
14 = File Backup Warning
15 = Sysman Restart Warning
16 = File Access Warning
17 = Home Gateway/NAS Provisioning Mismatch Warning
18 = SS7 Link Failure Alarm
19 = SS7 Link Congestion Alarm
20 = ISUP Failure Alarm
21 = ISUP Congestion Alarm
22 = SS7 FEP Congestion Alarm
23 = SS7 BEP Congestion Alarm
24 = High Availability Peer Contact Lost Alarm
25 = SS7 MTP3 Congestion Alarm
26 = SS7 MTP2 Trunk Failure Alarm
27 = SS7 Linkset Failure Alarm
28 = SS7 Destination Inaccessible Alarm
29 = SS7 Destination Congested Alarm
30 = SS7 Link Alignment Failure Alarmrw Gauge .1.3.6.1.4.1.562.14.2.4.1 |
alarmStatusInt1The value of this bit mask indicates that current status of CSG
component alarms. Each components is represented by a single
bit within the range occupied by each component alarm type.
Each bit in a true state reflects a currently raised alarm. The
actual bit position meanings are given below. Bit 0 is the LSB.
Bits
0-15 = Component Not In Provisioned State Alarm
16-31 = Component Multi Restart Alarmro Gauge .1.3.6.1.4.1.562.14.2.4.2 |
alarmStatusInt2The value of this bit mask indicates the current status of
active CSG alarms. Component-related alarms occupy a range of
bits: each bit within that range represents the alarm status
for a particular component.
Each bit in a true state reflects a currently raised alarm. The
actual bit position meanings are given below. Bit 0 is the LSB.
Bits
0-15 = Component Debug On Alarm
16-23 = Partition Space Alarm
24 = Home Gateway Failure Alarm
25 = NAS Failure Alarm
26 = SS7 Link Failure Alarm
27 = SS7 Link Congestion Alarm
28 = ISUP Failure Alarm
29 = ISUP Congestion Alarm
30 = High Availability Peer Contact Lost Alarm
31 = SS7 MTP3 Congestion Alarmro Gauge .1.3.6.1.4.1.562.14.2.4.3 |
alarmStatusInt3The value of this bit mask indicates the current status of
active CSG alarms.
Each bit in a true state reflects a currently raised alarm. The
actual bit position meanings are given below. Bit 0 is the LSB.
Bits
0 = SS7 MTP2 Trunk Failure Alarm
1 = SS7 Linkset Failure Alarm
2 = SS7 Destination Inaccessible Alarm
3 = SS7 Destination Congestion Alarm
4 = SS7 Link Alignment Failure Alarm
5 = CSG Complex Status Alarm
6 = External Ethernet Alarmro Gauge .1.3.6.1.4.1.562.14.2.4.4 |
alarmMaskInt2The value of this bit mask reflects the current additional filtering policy
of CSG events and alarms. Management stations which wish to not
receive certain events or alarm types from the CSG can modify
this value as needed. Note, however, that changes in the
filtration policy affect what is received by all management
stations.
Initially, the bit mask is set so that all bits are in a false
state. Each bit in a true state reflects a currently filtered
event, alarm, or alarm type.
The actual bit position meanings are given below. Bit 0 is LSB.
Bits
0 = External Ethernet Alarm
1 = Cluster Information retrieval Alarmrw Gauge .1.3.6.1.4.1.562.14.2.4.5 |
hgAlarmTableThe HgAlarmTable contains information about all the
current HG alarms SEQUENCE OF HgAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.10 |
hgAlarmTableEntryAn entry in the HgAlarmTable. HgAlarmTable entries
are indexed by componentIndex, which is an integer. HgAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.10.1 |
hgIndexIdentifies the n'th position in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.10.1.1 |
hgNameThe Home gateway to be used as indexro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.10.1.2 |
hgKeyUnique identifier for the HgFailure alarmro INTEGER .1.3.6.1.4.1.562.14.2.4.10.1.3 |
hgAlarmTimeStampIndicates the time of the HG Alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.10.1.4 |
hgIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.10.1.5 |
nasAlarmTableThe NasAlarmTable contains information about all the
current NAS alarms SEQUENCE OF NasAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.11 |
nasAlarmTableEntryAn entry in the NasAlarmTable. NasAlarmTable entries
are indexed by nasIndex, which is an integer. NasAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.11.1 |
nasIndexIdentifies the n'th position in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.11.1.1 |
nasNameThe NAS Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.11.1.2 |
nasKeyUnique identifier for the NAS Failure alarmro INTEGER .1.3.6.1.4.1.562.14.2.4.11.1.3 |
nasAlarmTimeStampIndicates the time of the NAS Alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.11.1.4 |
nasIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.11.1.5 |
nasCmplxNameThe complex which this alarm is raised against.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.11.1.6 |
ss7LinkFailureAlarmTableThe SS7LinkFailureAlarmTable contains alarms for SS7 link
failures. SEQUENCE OF SS7LinkFailureAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.12 |
ss7LinkFailureAlarmTableEntryThis object defines a row within the SS7 Link Failure Alarm Table.
A row can be uniquely identified with the row index. SS7LinkFailureAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.12.1 |
lfIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.12.1.1 |
lfKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.12.1.2 |
lfIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.12.1.3 |
lfLinkCodeThis object identifies the signalling link code (SLC) of the
failed link.ro INTEGER .1.3.6.1.4.1.562.14.2.4.12.1.5 |
lfTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.12.1.6 |
lfNameIndicates the configured name for the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.12.1.7 |
lfCardIdThis object identifies the device that hosts the failed link.
It provides a physical description of the device, as well as
its slot number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.12.1.8 |
lfLinkSetThis object identifies the linkset associated with the link
via its adjacent point code.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.12.1.9 |
ss7LinkCongestionAlarmTableThe SS7LinkCongestionAlarmTable contains alarms to indicate
congestion on an SS7 link. SEQUENCE OF SS7LinkCongestionAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.13 |
ss7LinkCongestionAlarmTableEntryThis object defines a row within the SS7 Link Congestion Alarm
Table. A row can be uniquely identified with the row index. SS7LinkCongestionAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.13.1 |
lcIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.13.1.1 |
lcKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.13.1.2 |
lcIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.13.1.3 |
lcLinkCodeThis object identifies the signalling link code (SLC) of
the affected link.ro INTEGER .1.3.6.1.4.1.562.14.2.4.13.1.4 |
lcTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.13.1.5 |
lcNameIndicates the configured name for the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.13.1.6 |
lcCardIdThis object identifies the device that hosts the failed link.
It provides a physical description of the device, as well as
its slot number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.13.1.7 |
lcLinkSetThis object identifies the linkset associated with the link
via its adjacent point code.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.13.1.8 |
ss7ISUPFailureAlarmTableThe SS7ISUPFailureAlarmTable contains alarms for SS7 ISUP
protocol stack failures. SEQUENCE OF SS7ISUPFailureAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.14 |
ss7ISUPFailureAlarmTableEntryThis object defines a row within the SS7 ISUP Failure Alarm Table.
A row can be uniquely identified with the row index. SS7ISUPFailureAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.14.1 |
ifIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.14.1.1 |
ifKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.14.1.2 |
ifIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.14.1.3 |
ifTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.14.1.4 |
ifNameIndicates the configured name for the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.14.1.5 |
ss7ISUPCongestionAlarmTableThe SS7ISUPCongestionAlarmTable contains alarms to indicate
congestion with an ISUP protocol stack. SEQUENCE OF SS7ISUPCongestionAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.15 |
ss7ISUPCongestionAlarmTableEntryThis object defines a row within the SS7 ISUP Congestion Alarm
Table. A row can be uniquely identified with the row index. SS7ISUPCongestionAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.15.1 |
icIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.15.1.1 |
icKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.15.1.2 |
icIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.15.1.3 |
icCongestionLevelThis object indicates the congestion level with an ISUP protocol
stack. Possible congestion levels are:
(0) Normal
(1) Congestionro INTEGER .1.3.6.1.4.1.562.14.2.4.15.1.4 |
icTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.15.1.5 |
icNameIndicates the configured name for the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.15.1.6 |
ss7MTP3CongestionAlarmTableThe SS7MTP3CongestionAlarmTable contains alarms to indicate
congestion on an MTP3 link. SEQUENCE OF SS7MTP3CongestionAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.16 |
ss7MTP3CongestionAlarmTableEntryThis object defines a row within the SS7 MTP3 Congestion Alarm
Table. A row can be uniquely identified with the row index. SS7MTP3CongestionAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.16.1 |
mtp3IndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.16.1.1 |
mtp3KeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.16.1.2 |
mtp3IPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.16.1.3 |
mtp3CongestionLevelThis object indicates the congestion level on a problem SS7 Link.
Possible congestion values are:
(0) Normal
(1) Minor
(2) Major
(3) Criticalro INTEGER .1.3.6.1.4.1.562.14.2.4.16.1.4 |
mtp3TimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.16.1.5 |
mtp3NameRepresents the configured name of the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.16.1.6 |
ss7MTP2TrunkFailureAlarmTableThe SS7MTP2TrunkFailureAlarmTable contains alarms to
indicate MTP2 trunk failures. SEQUENCE OF SS7MTP2TrunkFailureAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.17 |
ss7MTP2TrunkFailureAlarmTableEntryThis object defines a row within the SS7 MTP2 Failure Alarm
Table. A row can be uniquely identified with the row index. SS7MTP2TrunkFailureAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.17.1 |
mtp2IndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.17.1.1 |
mtp2KeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.17.1.2 |
mtp2IPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.17.1.3 |
mtp2NameThis object identifies the configured name of the machine which
sent the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.17.1.4 |
mtp2CardIdThis object indicates the device upon which the affected
trunk is hosted. The string contains a physical description
of the device, as well as its slot number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.17.1.5 |
mtp2AlarmConditionThis object indicates which of the possible alarm conditions is
in effect. Alarms are not nested: a new alarm is only reported
if there is no current alarm condition.ro MTP2AlarmConditionType .1.3.6.1.4.1.562.14.2.4.17.1.6 |
mtp2TimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.17.1.7 |
ss7LinksetFailureAlarmTableThe SS7LinksetFailureAlarmTable contains alarms to indicate
failure on an CSG linkset. SEQUENCE OF SS7LinksetFailureAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.18 |
ss7LinksetFailureAlarmTableEntryThis object defines a row within the SS7 Linkset Failure Alarm
Table. A row can be uniquely identified with the row index. SS7LinksetFailureAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.18.1 |
lsFailureIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.18.1.1 |
lsFailureKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.18.1.2 |
lsFailureIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.18.1.3 |
lsFailureNameRepresents the configured name of the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.18.1.4 |
lsFailurePointcodeThis object indicates the pointcode associated with the
linkset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.18.1.5 |
lsFailureTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.18.1.6 |
ss7DestinationInaccessibleAlarmTableThe SS7DestinationAccessAlarmTable contains alarms which indicate
inaccessible signalling destinations. SEQUENCE OF SS7DestinationInaccessibleAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.19 |
ss7DestinationInaccessibleAlarmTableEntryThis object defines a row within the SS7 Destination
Inaccessible Alarm Table. A row can be uniquely identified
with the row index. SS7DestinationInaccessibleAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.19.1 |
destInaccessIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.19.1.1 |
destInaccessKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.19.1.2 |
destInaccessIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.19.1.3 |
destInaccessNameRepresents the configured name of the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.19.1.4 |
destInaccessPointcodeThis object indicates the point code of the inaccessible
signalling destination.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.19.1.5 |
destInaccessTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.19.1.6 |
ss7DestinationCongestedAlarmTableThe SS7DestinationCongestedAlarmTable contains alarms to indicate
congestion on the given destination. SEQUENCE OF SS7DestinationCongestedAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.20 |
ss7DestinationCongestedAlarmTableEntryThis object defines a row within the SS7 Destination Congestion
Table. A row can be uniquely identified with the row index. SS7DestinationCongestedAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.20.1 |
destCongestIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.20.1.1 |
destCongestKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.20.1.2 |
destCongestIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.20.1.3 |
destCongestNameRepresents the configured name of the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.20.1.4 |
destCongestPointcodeThis object indicates the pointcode of the congested destination.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.20.1.5 |
destCongestCongestionLevelThis object indicates the congestion level on a problem SS7 pointcode.
Possible congestion values are:
(0) Normal
(1) Minor
(2) Major
(3) Criticalro INTEGER .1.3.6.1.4.1.562.14.2.4.20.1.6 |
destCongestTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.20.1.7 |
ss7LinkAlignmentAlarmTableThe SS7LinkAlignmentAlarmTable contains alarms to indicate
congestion on the CSG. SEQUENCE OF SS7LinkAlignmentAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.21 |
ss7LinkAlignmentAlarmTableEntryThis object defines a row within the SS7 Link Alignment Alarm
Table. A row can be uniquely identified with the row index. SS7LinkAlignmentAlarmTableEntry .1.3.6.1.4.1.562.14.2.4.21.1 |
linkAlignIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.4.21.1.1 |
linkAlignKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.4.21.1.2 |
linkAlignIPAddressThis object identifies the IP Address of the machine which
sent the alarm.ro IpAddress .1.3.6.1.4.1.562.14.2.4.21.1.3 |
linkAlignNameRepresents the configured name of the machine which sent the
alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.21.1.4 |
linkAlignLinkCodeThis object identifies the signalling link code (SLC) of
the affected link.ro INTEGER .1.3.6.1.4.1.562.14.2.4.21.1.5 |
linkAlignTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.4.21.1.6 |
linkAlignCardIdThis object identifies the device that hosts the failed link.
It provides a physical description of the device, as well as
its slot number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.21.1.7 |
linkAlignLinkSetThis object identifies the linkset associated with the link
via its adjacent point code.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.21.1.8 |
csgComplexStateTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.4.22 |
cplxNameCLLI, A unique identifier of the CSG Complex.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.1 |
cplxLocEthernetNameThe EthernetName attribute value of the node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.2 |
cplxLocEthernetIPThe EthernetIP attribute value of the node.ro IpAddress .1.3.6.1.4.1.562.14.2.4.22.3 |
cplxLocOperationalStateThe OperationalState of the node.
Possible values are:
UNKNOWN,
ENABLED,
ENABLED_NETDSC,
ENABLED_NETPAR,
DISABLEDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.4 |
cplxLocStandbyStateThe StandbyState attribute value of the node.
Possible values are:
UNKNOWN,
HOT_STANDBY,
COLD_STANDBY,
WARM_STANDBY,
PROVIDING_SERVICEro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.5 |
cplxLocAvailabilityStateThe AvailabilityState attribute value of the node.
Possible values are:
UNKNOWN,
AVAILABLE,
DEGRADED,
OFFLINEro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.6 |
cplxMateEthernetNameThe EthernetName attribute value of the mate node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.7 |
cplxMateEthernetIPThe EthernetIP attribute value of the mate node.ro IpAddress .1.3.6.1.4.1.562.14.2.4.22.8 |
cplxMateOperationalStateThe OperationalState of the mate node.
Possible values are:
UNKNOWN,
ENABLED,
ENABLED_NETDSC,
ENABLED_NETPAR,
DISABLEDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.9 |
cplxMateStandbyStateThe StandbyState attribute value of the mate node.
Possible values are:
UNKNOWN,
HOT_STANDBY,
COLD_STANDBY,
WARM_STANDBY,
PROVIDING_SERVICEro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.10 |
cplxMateAvailabilityStateThe AvailabilityState attribute value of the mate node.
Possible values are:
UNKNOWN,
AVAILABLE,
DEGRADED,
OFFLINEro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.11 |
cplxAlarmStatusThis object indicates the alarm status of the CSG Complex.
Possible status are:
NORMAL,
MAJOR,
CRITICALro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.4.22.12 |
ncServer OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.5 |
lostServerAlarmTable SEQUENCE OF LostServerAlarmTableEntry .1.3.6.1.4.1.562.14.2.5.1 |
lostServerAlarmTableEntryThis object defines a row within the Lost Server Alarm
Table. A row can be uniquely identified with the row index. LostServerAlarmTableEntry .1.3.6.1.4.1.562.14.2.5.1.1 |
lsIndexIdentifies the row number in the table. INTEGER .1.3.6.1.4.1.562.14.2.5.1.1.1 |
lsKeyUnique identifier for the alarm.ro INTEGER .1.3.6.1.4.1.562.14.2.5.1.1.2 |
lsIPAddressThis object identifies the IP Address of the machine which
is lost.ro IpAddress .1.3.6.1.4.1.562.14.2.5.1.1.3 |
lsNameThe configured name associated with the IP Address of the machine
which sent the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.1.1.4 |
lsTimeStampIndicates the time of the alarm.ro TimeString .1.3.6.1.4.1.562.14.2.5.1.1.5 |
ncServerIdThe ServerId attribute value of the node.ro INTEGER .1.3.6.1.4.1.562.14.2.5.2 |
ncServerNameThe ServerName attribute value of the node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.3 |
ncHostNameThe HostName attribute value of the node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.4 |
ncEthernetNameThe EthernetName attribute value of the node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.5 |
ncEthernetIPThe EthernetIP attribute value of the node.ro IpAddress .1.3.6.1.4.1.562.14.2.5.6 |
ncClusterNameThe ClusterName attribute value of the node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.7 |
ncClusterIPThe ClusterIP attribute value of the node.ro IpAddress .1.3.6.1.4.1.562.14.2.5.8 |
ncOperationalStateThe OperationalState of the node.
Possible values are:
UNKNOWN,
ENABLED,
ENABLED_NETDSC,
ENABLED_NETPAR,
DISABLEDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.9 |
ncStandbyStateThe StandbyState attribute value of the node.
Possible values are:
UNKNOWN,
HOT_STANDBY,
COLD_STANDBY,
WARM_STANDBY,
PROVIDING_SERVICEro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.10 |
ncAvailabilityStateThe AvailabilityState attribute value of the node.
Possible values are:
UNKNOWN,
AVAILABLE,
DEGRADED,
OFFLINEro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.11 |
ncSoftwareVersionThe SoftwareVersion attribute value of the node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.5.12 |
ncUpgradeInProgressThe UpgradeInProgress attribute value of the node.
Possible values are:
0 = UNKNOWN,
1 = ACTIVE,
2 = INACTIVEro UpgradeInProgress .1.3.6.1.4.1.562.14.2.5.13 |
ss7 OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.6 |
linksetTableThe linksetTable contains information about all the
linksets on the CSG. SEQUENCE OF LinksetTableEntry .1.3.6.1.4.1.562.14.2.6.1 |
linksetTableEntryAn entry in the linksetTable. Entries in the linkset
table are indexed by linksetIndex, which is an integer. LinksetTableEntry .1.3.6.1.4.1.562.14.2.6.1.1 |
linksetIndexIdentifies the n'th position in the table. INTEGER .1.3.6.1.4.1.562.14.2.6.1.1.1 |
linksetIdThe id of the linkset to be used as index.ro INTEGER .1.3.6.1.4.1.562.14.2.6.1.1.2 |
linksetAdjPointcodeThe adjacent pointcode of the linkset.ro INTEGER .1.3.6.1.4.1.562.14.2.6.1.1.3 |
linksetStateThe state of the linkset.ro LinksetState .1.3.6.1.4.1.562.14.2.6.1.1.4 |
linkTableThe linkTable contains information about the links
in a given linkset on the CSG. SEQUENCE OF LinkTableEntry .1.3.6.1.4.1.562.14.2.6.2 |
linkTableEntryAn entry in the linkTable. Entries in the link table
table are indexed by linksetIndex and linkIndex, which
are both integers. LinkTableEntry .1.3.6.1.4.1.562.14.2.6.2.1 |
linkIndexIdentifies the n'th position in the table. INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.1 |
linkIdThe id of the link.ro INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.2 |
linkHostnameThe hostname of the CSG to which this link is attached.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.6.2.1.3 |
linkCardDeviceNameThe device name of the card upon which this link is hosted.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.6.2.1.4 |
linkStateThe state of the link.ro LinkState .1.3.6.1.4.1.562.14.2.6.2.1.5 |
linkInhibitionStateThe inhibition status of the link.ro LinkInhibitionState .1.3.6.1.4.1.562.14.2.6.2.1.6 |
linkCongestionStateThe congestion status of the link.ro LinkCongestionState .1.3.6.1.4.1.562.14.2.6.2.1.7 |
linkAlignmentStateThe alignment status of the link.ro LinkAlignmentState .1.3.6.1.4.1.562.14.2.6.2.1.8 |
linkNumMSUReceivedThis object supplies the number of MSU's
received by the link.ro INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.9 |
linkNumMSUDiscardedThis object supplies the number of received
MSU's discarded by the link.ro INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.10 |
linkNumMSUTransmittedThis object supplies the number of MSU's
transmitted by the link.ro INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.11 |
linkNumSIFReceivedThis object supplies the number of SIF and
SIO octets received by the link.ro INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.12 |
linkNumSIFTransmittedThis object supplies the number of SIF and
SIO octects transmitted by the link.ro INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.13 |
linkNumAutoChangeoversThis object supplies the number of automatic
changeovers undergone by the link.ro INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.14 |
linkNumUnexpectedMsgsThis object supplies the number of unexpected
messages received by the link.ro INTEGER .1.3.6.1.4.1.562.14.2.6.2.1.15 |
routeTableThe routeTable contains information about the routes
provisioned in the CSG complex. SEQUENCE OF RouteTableEntry .1.3.6.1.4.1.562.14.2.6.3 |
routeTableEntryAn entry in the routeTable. Entries in the route table are indexed by
routeIndex, which is an integer. RouteTableEntry .1.3.6.1.4.1.562.14.2.6.3.1 |
routeIndexIdentifies the n'th position in the table. INTEGER .1.3.6.1.4.1.562.14.2.6.3.1.1 |
routeIdThe unique identifier of the route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.6.3.1.2 |
routeDestPointCodeThe destination point code associated with this route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.6.3.1.3 |
routeStateThe current state of the route.ro RouteState .1.3.6.1.4.1.562.14.2.6.3.1.4 |
routeRankRank assigned to this route.ro INTEGER .1.3.6.1.4.1.562.14.2.6.3.1.5 |
routeLinksetIdThe linkset associated with this route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.6.3.1.6 |
destinationTableThe destinationTable contains information about the destinations
provisioned in the CSG complex. SEQUENCE OF DestinationTableEntry .1.3.6.1.4.1.562.14.2.6.4 |
destinationTableEntryAn entry in the destinationTable. Entries in the destination table
are indexed by destIndex, which is an integer. DestinationTableEntry .1.3.6.1.4.1.562.14.2.6.4.1 |
destIndexIdentifies the n'th position in the table. INTEGER .1.3.6.1.4.1.562.14.2.6.4.1.1 |
destPointCodeThe destination point code of this destination.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.6.4.1.2 |
destStateThe current state of the destination.ro DestinationState .1.3.6.1.4.1.562.14.2.6.4.1.3 |
destRuleIdRule Identifier (for the routing table to be used) for this destination.ro INTEGER .1.3.6.1.4.1.562.14.2.6.4.1.4 |
omData OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.7 |
linkOMs OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.7.1 |
linkOMTableThe LinkTable contains information about each signaling
link on the CSG SEQUENCE OF LinkOMTableEntry .1.3.6.1.4.1.562.14.2.7.1.1 |
linkOMTableEntryAn entry in the LinkTable. Indexed by linkIndex LinkOMTableEntry .1.3.6.1.4.1.562.14.2.7.1.1.1 |
linkOMIdThe id of the link.ro INTEGER .1.3.6.1.4.1.562.14.2.7.1.1.1.1 |
linkOMSetIdThe id of the linkset.ro INTEGER .1.3.6.1.4.1.562.14.2.7.1.1.1.2 |
linkFailuresNumber of times this signaling link has failed.ro Counter .1.3.6.1.4.1.562.14.2.7.1.1.1.3 |
linkCongestionsNumber of times this signaling link has Congested.ro Counter .1.3.6.1.4.1.562.14.2.7.1.1.1.4 |
linkInhibitsNumber of times this signaling link has been inhibited.ro Counter .1.3.6.1.4.1.562.14.2.7.1.1.1.5 |
linkTransmittedMSUsNumber of messages sent on this signaling link.ro Counter .1.3.6.1.4.1.562.14.2.7.1.1.1.6 |
linkReceivedMSUsNumber of messages received on this signaling link.ro Counter .1.3.6.1.4.1.562.14.2.7.1.1.1.7 |
linkRemoteProcOutagesNumber of times the remote processor outgaes have been reported.ro Counter .1.3.6.1.4.1.562.14.2.7.1.1.1.8 |
maintenanceOMs OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.7.2 |
bLATimerExpiriesNumber of times the BLA timer has expired.ro Counter .1.3.6.1.4.1.562.14.2.7.2.1 |
rLCTimerExpiriesNumber of times the RLC timer has expired.ro Counter .1.3.6.1.4.1.562.14.2.7.2.2 |
uBATimerExpiriesNumber of times the UBA timer has expired.ro Counter .1.3.6.1.4.1.562.14.2.7.2.3 |
rSATimerExpiriesNumber of times the RSA timer has expired.ro Counter .1.3.6.1.4.1.562.14.2.7.2.4 |
callOMs OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.7.3 |
outCallAttemptsTotal number of outgoing call legs attempted.ro Counter .1.3.6.1.4.1.562.14.2.7.3.1 |
outCallNormalCompletionsTotal number of outgoing call legs completed normally.ro Counter .1.3.6.1.4.1.562.14.2.7.3.2 |
outCallAbnormalCompletionsTotal number of outgoing call legs completed abnormally.ro Counter .1.3.6.1.4.1.562.14.2.7.3.3 |
userBusyOutCallRejectsTotal Number of outgoing call legs rejected due to user busy signal.ro Counter .1.3.6.1.4.1.562.14.2.7.3.4 |
tempFailOutCallRejectsTotal Number of outgoing call legs rejected due to temporary failure.ro Counter .1.3.6.1.4.1.562.14.2.7.3.5 |
userUnavailableOutCallRejectsTotal number of outgoing call legs failed due to user not available.ro Counter .1.3.6.1.4.1.562.14.2.7.3.6 |
abnormalReleaseOutCallRejectsTotal Number of outgoing call legs rejected due to abnormal release.ro Counter .1.3.6.1.4.1.562.14.2.7.3.7 |
otherOutCallRejectsTotal Number of outgoing call legs rejected due to other reasons.ro Counter .1.3.6.1.4.1.562.14.2.7.3.8 |
cumulativeActiveOutCallsCumulatvie Number of outgoing call legs active so far.ro Counter .1.3.6.1.4.1.562.14.2.7.3.9 |
currentlyActiveOutCallsTotal Number of outgoing call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.3.10 |
currentlyActiveDigitalOutCallsTotal Number of outgoing digital call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.3.11 |
currentlyActiveAnalogOutCallsTotal Number of outgoing analog call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.3.12 |
inCallAttemptsTotal number of incoming call legs attempted.ro Counter .1.3.6.1.4.1.562.14.2.7.3.13 |
inCallNormalCompletionsTotal number of incoming call legs completed normally.ro Counter .1.3.6.1.4.1.562.14.2.7.3.14 |
inCallAbnormalCompletionsTotal number of incoming call legs completed abnormally.ro Counter .1.3.6.1.4.1.562.14.2.7.3.15 |
userBusyInCallRejectsTotal Number of incoming call legs rejected due to user busy signal.ro Counter .1.3.6.1.4.1.562.14.2.7.3.16 |
tempFailInCallRejectsTotal Number of incoming call legs rejected due to temporary failure.ro Counter .1.3.6.1.4.1.562.14.2.7.3.17 |
userUnavailableInCallRejectsTotal number of incoming call legs failed due to user not available.ro Counter .1.3.6.1.4.1.562.14.2.7.3.18 |
abnormalReleaseInCallRejectsTotal Number of incoming call legs rejected due to abnormal release.ro Counter .1.3.6.1.4.1.562.14.2.7.3.19 |
otherInCallRejectsTotal Number of incoming call legs rejected due to other reasons.ro Counter .1.3.6.1.4.1.562.14.2.7.3.20 |
cumulativeActiveInCallsCumulatvie Number of incoming call legs active so far.ro Counter .1.3.6.1.4.1.562.14.2.7.3.21 |
currentlyActiveInCallsTotal Number of incoming call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.3.22 |
currentlyActiveDigitalInCallsTotal Number of incoming digital call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.3.23 |
currentlyActiveAnalogInCallsTotal Number of incoming analog call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.3.24 |
trunkGroupOMs OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.7.4 |
trunkCallOMTableThe TrunkCallOMTable contains call related OMs on a trunk group basis SEQUENCE OF TrunkCallOMTableEntry .1.3.6.1.4.1.562.14.2.7.4.1 |
trunkCallOMTableEntryAn entry in the TrunkCallOMTable. Indexed by trunkCallOMIndex. TrunkCallOMTableEntry .1.3.6.1.4.1.562.14.2.7.4.1.1 |
trunkCallOMIndexIdentifies a trunk group index. INTEGER .1.3.6.1.4.1.562.14.2.7.4.1.1.1 |
trunkGroupCLLIThe Common Language Location Identifier(CLLI),
a unique alphanumeric value to identify this Trunk Group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.7.4.1.1.2 |
numberOfCircuitsTotal Number of Circuits provisioned against this trunk group.ro INTEGER .1.3.6.1.4.1.562.14.2.7.4.1.1.3 |
trunkOutCallAttemptsTotal number of outgoing call legs attempted.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.4 |
trunkOutCallNormalCompletionsTotal number of outgoing call legs completed normally.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.5 |
trunkOutCallAbnormalCompletionsTotal number of outgoing call legs completed abnormally.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.6 |
trunkUserBusyOutCallRejectsTotal Number of outgoing call legs rejected due to user busy signal.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.7 |
trunkTempFailOutCallRejectsTotal Number of outgoing call legs rejected due to temporary failure.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.8 |
trunkUserUnavailableOutCallRejectsTotal number of outgoing call legs failed due to user not available.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.9 |
trunkAbnormalReleaseOutCallRejectsTotal Number of outgoing call legs rejected due to abnormal release.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.10 |
trunkOtherOutCallRejectsTotal Number of outgoing call legs rejected due to other reasons.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.11 |
trunkCumulativeActiveOutCallsCumulatvie Number of outgoing call legs active so far.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.12 |
trunkCurrentlyActiveOutCallsTotal Number of outgoing call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.13 |
trunkCurrentlyActiveDigitalOutCallsTotal Number of outgoing digital call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.14 |
trunkCurrentlyActiveAnalogOutCallsTotal Number of outgoing analog call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.15 |
trunkInCallAttemptsTotal number of incoming call legs attempted.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.16 |
trunkInCallNormalCompletionsTotal number of incoming call legs completed normally.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.17 |
trunkInCallAbnormalCompletionsTotal number of incoming call legs completed abnormally.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.18 |
trunkUserBusyInCallRejectsTotal Number of incoming call legs rejected due to user busy signal.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.19 |
trunkTempFailInCallRejectsTotal Number of incoming call legs rejected due to temporary failure.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.20 |
trunkUserUnavailableInCallRejectsTotal number of incoming call legs failed due to user not available.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.21 |
trunkAbnormalReleaseInCallRejectsTotal Number of incoming call legs rejected due to abnormal release.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.22 |
trunkOtherInCallRejectsTotal Number of incoming call legs rejected due to other reasons.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.23 |
trunkCumulativeActiveInCallsCumulatvie Number of incoming call legs active so far.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.24 |
trunkCurrentlyActiveInCallsTotal Number of incoming call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.25 |
trunkCurrentlyActiveDigitalInCallsTotal Number of incoming digital call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.26 |
trunkCurrentlyActiveAnalogInCallsTotal Number of incoming analog call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.27 |
trunkAllActiveCallsTotal number of currently active call legs (all type).ro INTEGER .1.3.6.1.4.1.562.14.2.7.4.1.1.28 |
trunkOccupancyPerCCSTrunk occupancy in Centum Call Seconds.ro INTEGER .1.3.6.1.4.1.562.14.2.7.4.1.1.29 |
trafficInCCSsScanned om for tgms that are call busyro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.30 |
trafficInCCSIncomingsScanned Om on tgms with an incoming call.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.31 |
localBusyInCCSsScanned om for tgms that are locally blocked.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.32 |
remoteBusyInCCSsScanned om for tgms that are remoteley blocked.ro Counter .1.3.6.1.4.1.562.14.2.7.4.1.1.33 |
phoneNumberOMs OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.7.5 |
phoneCallOMTableThe PhoneCallOMTable contains call related OMs on a phone number basis SEQUENCE OF PhoneCallOMTableEntry .1.3.6.1.4.1.562.14.2.7.5.1 |
phoneCallOMTableEntryAn entry in the PhoneCallOMTable. Indexed by phoneGroupIndex. PhoneCallOMTableEntry .1.3.6.1.4.1.562.14.2.7.5.1.1 |
phoneCallOMIndexUniquely identifies an entry in this table. INTEGER .1.3.6.1.4.1.562.14.2.7.5.1.1.1 |
phoneNumberPhone number for the underlying Call OM record.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.7.5.1.1.2 |
phoneDialCallAttemptsTotal number of dial calls attempted.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.3 |
phoneDialCallNormalCompletionsTotal number of dial calls completed normally.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.4 |
phoneDialCallAbnormalCompletionsTotal number of dial calls completed abnormally.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.5 |
phoneUserBusyDialCallRejectsTotal Number of dial calls rejected due to user busy signal.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.6 |
phoneTempFailDialCallRejectsTotal Number of dial calls rejected due to temporary failure.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.7 |
phoneUserUnavailableDialCallRejectsTotal number of dial calls failed due to user not available.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.8 |
phoneAbnormalReleaseDialCallRejectsTotal Number of dial calls rejected due to abnormal release.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.9 |
phoneOtherDialCallRejectsTotal Number of dial calls rejected due to other reasons.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.10 |
phoneCumulativeActiveDialCallsCumulatvie Number of dial calls active so far.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.11 |
phoneCurrentlyActiveDialCallsTotal Number of dial calls currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.12 |
phoneCurrentlyActiveDigitalDialCallsTotal Number of digital dial calls currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.13 |
phoneCurrentlyActiveAnalogDialCallsTotal Number of analog dial calls currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.5.1.1.14 |
systemOMs OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.7.6 |
csgComplexCLLIA unique identifier of the CSG Complex.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.7.6.1 |
serverHostNameHost Name of this server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.7.6.2 |
serverIpAddressIP address of this server.ro IpAddress .1.3.6.1.4.1.562.14.2.7.6.3 |
serverCLLIA unique identifier of this server (common in the telco world).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.7.6.4 |
mateServerHostNameHost Name of this server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.7.6.5 |
mateServerIpAddressIP address of this server.ro IpAddress .1.3.6.1.4.1.562.14.2.7.6.6 |
serverMemSizeMemory size in mega bytes of this server.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.8 |
provisionedDPCsNumber of destination point codes provisioned.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.9 |
provisionedCircuitsNumber of circuits provisioned.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.10 |
inserviceCircuitsNumber of circuits in service.
This number goes up or down at any given time.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.11 |
provisionedNASesNumber of NASes provisioned.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.12 |
aliveNASesNumber of NASes known to be alive.
This number goes up or down at any given time.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.13 |
inserviceNASesNumber of NASes in service.
This number goes up or down at any given time.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.14 |
provsionedCardsNumber of NAS cards provisioned.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.15 |
inserviceCardsNumber of NAS cards in service.
This number goes up or down at any given time.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.16 |
provisionedPortsNumber of ports provisioned.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.17 |
inservicePortsNumber of ports in service.
This number goes up or down at any given time.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.18 |
userCPUUsagePercentage of CPU used in user domain.
Survman computes this value in every 600 seconds. The value
stored in the MIB will be the last one computed.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.19 |
systemCPUUsagePercentage of CPU used in system domain in this server.
Survman computes this value in every 600 seconds. The value
stored in the MIB will be the last one computed.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.20 |
totalCPUUsagePercentage of CPU used in total in this server
Survman computes this value in every 600 seconds. The value
stored in the MIB will be the last one computed.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.21 |
maxCPUUsageHigh water measurement.
Maximum CPU Usage (%) in this server.
Survman computes this value in every 600 seconds. The value
stored in the MIB will be the last one computed.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.22 |
avgLoadAverage CPU load factor in this server.
Survman computes this value in every 600 seconds. The value
stored in the MIB will be the last one computed.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.23 |
systemCallRateSystem Call rate (per second) in this Cserver.
Survman computes this value in every 600 seconds. The value
stored in the MIB will be the one computed the last time.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.24 |
contextSwitchRateProcess context switching rate (per second) in this server.
Survman computes this value in every 600 seconds. The value
stored in the MIB will be the one computed the last time.ro INTEGER .1.3.6.1.4.1.562.14.2.7.6.25 |
lastUpdateOMFileName of the last updated OM file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.7.6.26 |
nasOMs OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.2.7.7 |
nasCallOMTableThe NasCallOMTable contains call related OMs on a nas basis SEQUENCE OF NasCallOMTableEntry .1.3.6.1.4.1.562.14.2.7.7.1 |
nasCallOMTableEntryAn entry in the NasCallOMTable. Indexed by nasCallOMIndex. NasCallOMTableEntry .1.3.6.1.4.1.562.14.2.7.7.1.1 |
nasCallOMIndexIdentifies a nas Call OM . INTEGER .1.3.6.1.4.1.562.14.2.7.7.1.1.1 |
nasName1A unique alphanumeric value to identify this Nas.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.2.7.7.1.1.2 |
numberOfPortsTotal Number of Ports provisioned against this nas.ro INTEGER .1.3.6.1.4.1.562.14.2.7.7.1.1.3 |
nasOutCallAttemptsTotal number of outgoing call legs attempted.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.4 |
nasOutCallNormalCompletionsTotal number of outgoing call legs completed normally.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.5 |
nasOutCallAbnormalCompletionsTotal number of outgoing call legs completed abnormally.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.6 |
nasUserBusyOutCallRejectsTotal Number of outgoing call legs rejected due to user busy signal.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.7 |
nasTempFailOutCallRejectsTotal Number of outgoing call legs rejected due to temporary failure.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.8 |
nasUserUnavailableOutCallRejectsTotal number of outgoing call legs failed due to user not available.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.9 |
nasAbnormalReleaseOutCallRejectsTotal Number of outgoing call legs rejected due to abnormal release.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.10 |
nasOtherOutCallRejectsTotal Number of outgoing call legs rejected due to other reasons.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.11 |
nasCumulativeActiveOutCallsCumulatvie Number of outgoing call legs active so far.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.12 |
nasCurrentlyActiveOutCallsTotal Number of outgoing call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.13 |
nasCurrentlyActiveDigitalOutCallsTotal Number of outgoing digital call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.14 |
nasCurrentlyActiveAnalogOutCallsTotal Number of outgoing analog call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.15 |
nasInCallAttemptsTotal number of incoming call legs attempted.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.16 |
nasInCallNormalCompletionsTotal number of incoming call legs completed normally.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.17 |
nasInCallAbnormalCompletionsTotal number of incoming call legs completed abnormally.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.18 |
nasUserBusyInCallRejectsTotal Number of incoming call legs rejected due to user busy signal.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.19 |
nasTempFailInCallRejectsTotal Number of incoming call legs rejected due to temporary failure.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.20 |
nasUserUnavailableInCallRejectsTotal number of incoming call legs failed due to user not available.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.21 |
nasAbnormalReleaseInCallRejectsTotal Number of incoming call legs rejected due to abnormal release.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.22 |
nasOtherInCallRejectsTotal Number of incoming call legs rejected due to other reasons.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.23 |
nasCumulativeActiveInCallsCumulatvie Number of incoming call legs active so far.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.24 |
nasCurrentlyActiveInCallsTotal Number of incoming call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.25 |
nasCurrentlyActiveDigitalInCallsTotal Number of incoming digital call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.26 |
nasCurrentlyActiveAnalogInCallsTotal Number of incoming analog call legs currently active.ro Counter .1.3.6.1.4.1.562.14.2.7.7.1.1.27 |
nasAllActiveCallsTotal number of currently active call legs (all type).ro INTEGER .1.3.6.1.4.1.562.14.2.7.7.1.1.28 |
nasMaxPortsUsedMaximum number of ports used in this nas since the last system restart.ro INTEGER .1.3.6.1.4.1.562.14.2.7.7.1.1.29 |
nasMinPortsUsedMinimum number of ports used in this nas since the last system restart.ro INTEGER .1.3.6.1.4.1.562.14.2.7.7.1.1.30 |
nasCurrentlyInUsePortsNumber of ports currently in use.ro INTEGER .1.3.6.1.4.1.562.14.2.7.7.1.1.31 |