ITOUCH-SYSTEM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
117
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
117 total| Object Name |
|---|
resourceFailureIndication that a system resource lack occurred of
the type resType. TRAP-TYPE .1.3.6.1.4.1.33.0.9 |
sysLoginAuthenticationFailureIndicates when and where a user attempted and failed to
access the system. TRAP-TYPE .1.3.6.1.4.1.33.0.28 |
xSystem OBJECT IDENTIFIER .1.3.6.1.4.1.33.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.33.1 |
resourceLackIndication that the system incremented the
corresponding value of resLacks. TRAP-TYPE .1.3.6.1.4.1.33.1.0.1 |
sysIdentAn identification string for local and remote
displays. Corresponds directly to SERVER
IDENTIFICATION and the value labeled
'Identification:' on the SERVER CHARACTERISTICS
display.rw DisplayString .1.3.6.1.4.1.33.1.1 |
sysDefineModeThe system's operation with regard to DEFINE
commands. 'permOnly' indicates that DEFINE commands
modify only the permanent data base. 'operAndPerm'
indicates that DEFINE commands modify both
operational and permanent data bases, unless
specifically documented to the contrary.
Corresponds to SERVER CHANGE and the presence of the
label CHANGE in the SERVER CHARACTERISTICS
display.rw Enumeration .1.3.6.1.4.1.33.1.2 |
sysDateTimeThe system's current local date and time.
Corresponds directly to SERVER DATE and SERVER TIME
and the value in various displays.rw DateTime .1.3.6.1.4.1.33.1.3 |
sysTimeZoneThe adjustment to apply to a universal (Greenwich)
time received when down-line loaded, comprising two
octets. The first octet is the number of hours west
of universal, the second is the number of minutes.
Corresponds directly to SERVER TIMEZONE and the
value labeled 'Timezone:' in the SERVER
CHARACTERISTICS display.rw OCTET STRING .1.3.6.1.4.1.33.1.4 |
sysLoadSoftwareThe software file name to request for down-line
load of the server. Corresponds directly to SERVER
SOFTWARE, and the value labeled 'Software:' in the
SERVER CHARACTERISTICS display.rw DisplayString .1.3.6.1.4.1.33.1.5 |
sysDumpControl for dumping the system's memory when the
system crashes. Corresponds directly to SERVER DUMP
and the presence of 'Dump' under the label 'Enabled
Characteristics' in the SERVER CHARACTERISTICS
display.rw Enumeration .1.3.6.1.4.1.33.1.6 |
sysMaintenancePasswordThe password a management system must supply to
force the system to reboot or use the system's
remote console via the Maintenance Operation
Protocol (MOP). Corresponds directly to SERVER
MAINTENANCE PASSWORD.
When setting this value, the management system must
supply eight octets, filling with zeros from the
first octet. That is, the value '1ab42' would be
expressed as '0.0.0.0.0.1.ab.42'. Setting the value
to zero disables the password check.
When returning this value, the agent always returns
a zero length OCTET STRING.rw OCTET STRING .1.3.6.1.4.1.33.1.7 |
sysLocalNameThe system's local name. Corresponds directly to
SERVER NAME and the value labeled 'Name:' in the
SERVER CHARACTERISTICS display.rw DisplayString .1.3.6.1.4.1.33.1.8 |
sysSoftwareVersionTypeThe software version variant running in the system.
Corresponds to the letter in the software version in
the SERVER CHARACTERISTICS display.
alpha 'A': alpha test
beta 'B': beta test
production null: normal, production software
special 'S': special, custom softwarero Enumeration .1.3.6.1.4.1.33.1.9 |
sysSoftwareVersionThe software version running in the system. In
order, the octets contain major version, minor
version, ECO, and pre-release number. Corresponds
to the numbers in the software version in the SERVER
CHARACTERISTICS display.
For example, the version display for
sysSoftwareVersionType 'production' and
sysSoftwareVersion '2.2.0.0' is 'V2.2'.
The version display for sysSoftwareVersionType
'beta' and sysSoftwareVersion '3.1.0.4' is
'V3.1B4'.ro OCTET STRING .1.3.6.1.4.1.33.1.10 |
sysRomVersionThe firmware version of the bootstrap ROM installed
in the system. Corresponds directly to the value
labeled 'Rom' in the SERVER CHARACTERISTICS
display.ro INTEGER .1.3.6.1.4.1.33.1.11 |
sysHardwareTypeThe type of hardware on which the system is
running. Corresponds directly to the value labeled
'Hardware Type:' in the UNIT display.ro HardwareType .1.3.6.1.4.1.33.1.12 |
sysHardwareVersionThis version of hardware on which the system is
running. Corresponds directly to part of the value
labeled 'HW' in the SERVER CHARACTERISTICS
display.ro INTEGER .1.3.6.1.4.1.33.1.13 |
sysChassisTypeThe type of chassis in which the system is running.
Corresponds directly to part of the value labeled
'HW' in the SERVER CHARACTERISTICS display.ro ChassisType .1.3.6.1.4.1.33.1.14 |
sysChassisVersionThis version of chassis in which the system is
running. Corresponds directly to part of the value
labeled 'HW' in the SERVER CHARACTERISTICS
display.ro INTEGER .1.3.6.1.4.1.33.1.15 |
sysCrashControl to cause this system to crash. In response
to a get-request or get-next-request, the agent
always returns 'ready' for this value. Setting the
value to 'ready' has no effect. Setting it to
'execute' causes an immediate crash. Corresponds to
the CRASH command.rw Enumeration .1.3.6.1.4.1.33.1.16 |
sysInitializeControl to cause this system to reset its software
to initial load values, typically by reloading.
When executing an initialize command, the system
observes the value of sysInitializeDelay as supplied
anywhere in the same set request with sysInitialize.
If this value is not included in the set request,
the system uses its default value.
In response to a get-request or get-next-request,
the agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'conditionalExecute' causes initialization if
the overall system state is acceptible (such as not
needing to store permanent parameters). Setting it
to 'unconditionalExecute' causes initialization
regardless of the overall system state. Setting it
to 'cancel' aborts an initialization that has not
yet started. According to standard SNMP operation,
if the system is not in a proper state to accept a
given set request for this value, it returns the
standard SNMP error 'badValue'.
Corresponds to the INITIALIZE command.rw Enumeration .1.3.6.1.4.1.33.1.17 |
sysInitializeDelayThe number of minutes to delay before beginning the
system initialization process as executed with
sysInitialize.
This value cannot be set outside a set-request that
contains the value 'execute' for sysInitialize. If
not included in such a set, the default value is 1.
Corresponds to the INITIALIZE command's DELAY
parameter and to the value labeled 'Minutes to
shutdown:' in the SYSTEM STATUS display.rw INTEGER .1.3.6.1.4.1.33.1.18 |
sysZeroAllControl to zero all counters. In response to a
get-request or get-next-request, the agent always
returns 'ready' for this value. Setting the value
to 'ready' has no effect. Setting it to 'execute'
causes all the system's counters to be zeroed.
Corresponds to the ZERO ALL command.rw Enumeration .1.3.6.1.4.1.33.1.19 |
sysZeroBaseControl to zero all base counters. In response to
a get-request or get-next-request, the agent always
returns 'ready' for this value. Setting the value
to 'ready' has no effect. Setting it to 'execute'
causes all the system's base counters to be zeroed.
Examples of counters that are zeroed are the SNMP
counters or the counters from the SYSTEM COUNTERS
display. Examples of counters that are not zeroed
are Ethernet interface counters or port counters.
Corresponds to the ZERO SYSTEM command.rw Enumeration .1.3.6.1.4.1.33.1.20 |
sysZeroBaseTimeThe number hundredths of a second since the most
recent zeroing of the base counters, such as through
execution of sysZeroAll or sysZeroBase. Corresponds
directly to the value labeled 'Seconds Since
Zeroed:' in the SERVER COUNTERS display.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.1.21 |
sysLoaderNameThe name of the system that provided this system's
running software. Corresponds directly to the value
labeled 'Primary Host:' in the SERVER STATUS
display.ro DisplayString .1.3.6.1.4.1.33.1.22 |
sysLoaderAddressTypeThe type of network address contained in
sysLoaderAddress. 'unknown' means no address has
been defined. 'other' means no other type value
applies. 'local' means there is no address and this
system's software was loaded from local storage.
'ip' is an Internet IP address. 'ethernet' is an
802.3 MAC address. Corresponds indirectly to the
value labeled 'Load Address:' in the SERVER STATUS
display.ro AddressType .1.3.6.1.4.1.33.1.23 |
sysLoaderAddressThe network address of the system that provided
this system's running software. Corresponds
directly to the value labeled 'Load Address:' in the
SERVER STATUS display.ro OCTET STRING .1.3.6.1.4.1.33.1.24 |
sysDumperAddressTypeThe type of network address contained in
sysDumperAddress. 'unknown' means no address has
been defined. 'other' means no other type value
applies. 'local' means there is no address and this
system's was dumped to local storage. 'ip' is an
Internet IP address. 'ethernet' is an 802.3 MAC
address. Corresponds indirectly to the value
labeled 'Dump Address:' in the SERVER STATUS
display.ro AddressType .1.3.6.1.4.1.33.1.25 |
sysDumperAddressThe network address of the system that most
recently accepted a crash dump from this system.
Corresponds directly to the value labeled 'Dump
Address:' in the SERVER STATUS display.ro OCTET STRING .1.3.6.1.4.1.33.1.26 |
sysResourceLacksThe number of times a local resource allocation
failed, for example due to lack of dynamic memory.
Corresponds directly to the value labeled 'Resource
Errors:' in the SERVER STATUS display.ro Counter .1.3.6.1.4.1.33.1.27 |
sysChassisStateFor chassis-based systems, the state of the overall
chassis. 'notApplicable' indicates the system is
not chassis based. 'noFault' indicates no current
chassis problem. 'fault' indicates a current
chassis problem such as a card or power supply
failure. Corresponds directly to the value labeled
'Crate Current State: in the SERVER ALTERNATE STATUS
display.ro Enumeration .1.3.6.1.4.1.33.1.28 |
sysChassisFaultTransitionsThe number of times this system has seen
sysChassisState switch from 'noFault' to 'fault' or
from 'fault' to 'noFault'. Corresponds directly to
the value labeled 'Crate Transition Count: in the
SERVER ALTERNATE STATUS display.ro Counter .1.3.6.1.4.1.33.1.29 |
sysResourceNumberThe number of resource entries in the Resource
table.ro INTEGER .1.3.6.1.4.1.33.1.30 |
sysFeatureNumberThe number of feature entries in the Feature
table.ro INTEGER .1.3.6.1.4.1.33.1.31 |
resTableA list of resource entries. The number of entries
is given by the value of sysResourceNumber. SEQUENCE OF ResEntry .1.3.6.1.4.1.33.1.32 |
resEntryStatus values for a system resource. ResEntry .1.3.6.1.4.1.33.1.32.1 |
resTypeIdentification of a resource type. Typically
corresponds directly to a label such as 'Processes:'
in the SERVER ALTERNATE STATUS display.ro Enumeration .1.3.6.1.4.1.33.1.32.1.1 |
resCurrentThe number of resources currently in use on the
system. Typically corresponds directly to a value
labeled 'Cur' in the SERVER ALTERNATE STATUS
display.ro Gauge .1.3.6.1.4.1.33.1.32.1.2 |
resWorstThe highest or lowest value of resCurrent since
system initialization. Typically corresponds
directly to a value labeled 'High' or 'Low' in the
SERVER ALTERNATE STATUS display.ro Gauge .1.3.6.1.4.1.33.1.32.1.3 |
resAdminMaximumThe desired maximum possible number of resources in
the system. In many cases, ACCESS to this object
for a particular resType is read-only. Typically
corresponds directly to a value labeled 'Max' in the
SERVER ALTERNATE STATUS display for desired,
administrative values. When the desired change
takes effect is implementation specific, ranging
from immediately to the next system initialization.rw INTEGER .1.3.6.1.4.1.33.1.32.1.4 |
resLacksThe number of times since system initialization
that the system could not obtain the resource
because none were available. Typically corresponds
directly to a value labeled 'Failure' in the SERVER
ALTERNATE STATUS display.
If such failures do not apply to the particular
resource, such as 'cpuPercent', the agent returns
zero for this object.ro Counter .1.3.6.1.4.1.33.1.32.1.5 |
resLackTimeThe local system date and time when resLack last
increased. Typically corresponds directly to a
value labeled 'Last Occurred' in the SERVER
ALTERNATE STATUS display.
If such failures do not apply to the particular
resource, such as 'cpuPercent', the agent returns
all zeroes (unknown) for this object.ro DateTime .1.3.6.1.4.1.33.1.32.1.6 |
resOperMaximumThe current maximum possible number of resources in
the system. Typically corresponds directly to a
value labeled 'Max' in the SERVER ALTERNATE STATUS
display for current operational values. This value
is based on current or previous value of
resAdminMaximum.ro INTEGER .1.3.6.1.4.1.33.1.32.1.7 |
featTableA list of feature entries. The number of entries
is given by the value of sysFeatureNumber. SEQUENCE OF FeatEntry .1.3.6.1.4.1.33.1.33 |
featEntryStatus values for a system feature. FeatEntry .1.3.6.1.4.1.33.1.33.1 |
featTypeIdentification of a feature type. Corresponds to a
SERVER feature keyword.ro Enumeration .1.3.6.1.4.1.33.1.33.1.1 |
featStatusThe status of the feature as of the next system
initialization. Corresponds to the presence of the
feature's lable following the label 'Enabled
Feature(s): in the UNIT display.rw Enumeration .1.3.6.1.4.1.33.1.33.1.2 |
featKeyThe key a management system must supply to make a
locked feature available. When unlocking a feature
and the management system does not supply a value
for featStatus, that object's value is
implementation dependent.
When returning this value, the agent always returns
a zero length DisplayString.rw DisplayString .1.3.6.1.4.1.33.1.33.1.3 |
xBootControl OBJECT IDENTIFIER .1.3.6.1.4.1.33.1.34 |
bootControlLoadInternetFileThe filename to request when loading an image via
TFTP. Corresponds directly to SERVER INTERNET LOAD
FILE and the value labeled 'Internet Load File:' in
the SERVER BOOT CHARACTERISTICS display.rwdeprecated DisplayString .1.3.6.1.4.1.33.1.34.1 |
bootControlLoadInternetServerThe internet address of the server to use when
loading an image via TFTP. Corresponds directly to
SERVER INTERNET LOAD HOST and the value labeled
'Internet Load Host:' in the SERVER BOOT
CHARACTERISTICS display.rwdeprecated IpAddress .1.3.6.1.4.1.33.1.34.2 |
bootControlLoadInternetGatewayThe internet address of the gateway to use when
loading an image via TFTP. Corresponds directly to
SERVER INTERNET LOAD GATEWAY and the value labeled
'Internet Load Gateway:' in the SERVER BOOT
CHARACTERISTICS display.rwdeprecated IpAddress .1.3.6.1.4.1.33.1.34.3 |
bootControlLoadBootpTftpControl for loading via the combination of BOOTP
and TFTP. Corresponds to SERVER LOAD PROTOCOL
BOOTPTFTP and the presence of 'BOOTP/TFTP/'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.4 |
bootControlLoadTftpDirectControl for loading via directed TFTP. Corresponds
to SERVER LOAD PROTOCOL TFTPDIRECT and the presence
of 'TFTPDIRECT' following the label 'Load Protocols
Enabled:' in the SERVER BOOT CHARACTERISTICS
display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.5 |
bootControlLoadLocalControl for loading from a local medium.
Corresponds to SERVER LOAD PROTOCOL LOCAL and the
presence of 'LOCAL' following the label 'Load
Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.6 |
bootControlLoadMopControl for loading via DEC MOP. Corresponds to
SERVER LOAD PROTOCOL MOP and the presence of 'MOP'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.7 |
bootControlLoadProprietaryControl for loading via ITouch-proprietary extended
MOP. Corresponds to SERVER LOAD PROTOCOL
PROPRIETARY and the presence of 'Proprietary'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.8 |
bootControlLoadRarpTftpControl for loading via the combination of RARP and
TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP
and the presence of 'RARP/TFTP' following the label
'Load Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.9 |
bootControlDumpBootpTftpControl for dumping via the combination of BOOTP
and TFTP. Corresponds to SERVER DUMP PROTOCOL
BOOTPTFTP and the presence of 'BOOTP/TFTP' following
the label 'Dump Protocols Enabled:' in the SERVER
BOOT CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.10 |
bootControlDumpLocalControl for dumping to a local medium. Corresponds
to SERVER DUMP PROTOCOL LOCAL and the presence of
'Local' following the label 'Dump Protocols
Enabled:' in the SERVER BOOT CHARACTERISTICS
display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.11 |
bootControlDumpMopControl for dumping via DEC MOP. Corresponds to
SERVER DUMP PROTOCOL MOP and the presence of 'MOP'
following the label 'Dump Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.12 |
bootControlDumpProprietaryControl for dumping via ITouch-proprietary extended
MOP. Corresponds to SERVER DUMP PROTOCOL
PROPRIETARY and the presence of 'Proprietary'
following the label 'Dump Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.13 |
bootControlDumpRarpTftpControl for dumping via the combination of RARP and
TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP
and the presence of 'RARP/TFTP' following the label
'Dump Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.14 |
bootControlParamBootpTftpControl for loading parameters via the combination
of BOOTP and TFTP. Corresponds to SERVER PARAMETER
PROTOCOL MOP and the presence of 'BOOTP/TFTP'
following the label 'Parameter Protocols Enabled:'
in the SERVER BOOT CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.15 |
bootControlParamLocalControl for loading parameters from a local medium.
Corresponds to SERVER PARAMETER PROTOCOL LOCAL and
the presence of 'LOCAL' following the label
'Parameter Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.16 |
bootControlParamMopControl for loading parameters via DEC MOP.
Corresponds to SERVER PARAMETER PROTOCOL MOP and the
presence of 'MOP' following the label 'Parameter
Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.17 |
bootControlParamProprietaryControl for loading parameters via
ITouch-proprietary extended MOP. Corresponds to
SERVER PARAMETER PROTOCOL PROPRIETARY and the
presence of 'Proprietary' following the label
'Parameter Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.18 |
bootControlParamRarpTftpControl for loading parameters via the combination
of RARP and TFTP. Corresponds to SERVER PARAMETER
PROTOCOL RARPTFTP and the presence of 'RARP/TFTP'
following the label 'Parameter Protocols Enabled:'
in the SERVER BOOT CHARACTERISTICS display.rwdeprecated Enumeration .1.3.6.1.4.1.33.1.34.19 |
sysInstalledMemoryThe total number of bytes of main memory installed
in the system. Corresponds directly to the value
labeled 'Installed' on the SERVER ALTERNATE STATUS
display. A value of 0 indicates standard memory for
the particular hardware.ro Gauge .1.3.6.1.4.1.33.1.35 |
sysTemperatureLevelThe temperature level of the system. 'unknown'
indicates the system does not support a temperature
sensor. 'normal' indicates a normal temperature
level. 'high' indicates an excessive temperature
level. Corresponds directly to the value labeled
'Temperature Level:' in the SERVER ALTERNATE STATUS
display.ro Enumeration .1.3.6.1.4.1.33.1.36 |
bootRecordTableA list of boot control records. SEQUENCE OF BootRecordEntry .1.3.6.1.4.1.33.1.37 |
bootRecordEntryValues for a boot record. BootRecordEntry .1.3.6.1.4.1.33.1.37.1 |
bootRecordIndexAn index value that uniquely identifies a boot
control record entry, from 1 to the number of
entries for the system.ro INTEGER .1.3.6.1.4.1.33.1.37.1.1 |
bootRecordLoadInternetFileThe filename to request when loading an image via
TFTP. Corresponds directly to SERVER INTERNET LOAD
FILE and the value labeled 'Internet Load File:' in
the SERVER BOOT CHARACTERISTICS display.rw DisplayString .1.3.6.1.4.1.33.1.37.1.2 |
bootRecordLoadInternetServerThe internet address of the server to use when
loading an image via TFTP. Corresponds directly to
SERVER INTERNET LOAD HOST and the value labeled
'Internet Load Host:' in the SERVER BOOT
CHARACTERISTICS display.rw IpAddress .1.3.6.1.4.1.33.1.37.1.3 |
bootRecordLoadInternetGatewayThe internet address of the gateway to use when
loading an image via TFTP. Corresponds directly to
SERVER INTERNET LOAD GATEWAY and the value labeled
'Internet Load Gateway:' in the SERVER BOOT
CHARACTERISTICS display.rw IpAddress .1.3.6.1.4.1.33.1.37.1.4 |
bootRecordLoadBootpTftpControl for loading via the combination of BOOTP
and TFTP. Corresponds to SERVER LOAD PROTOCOL
BOOTPTFTP and the presence of 'BOOTP/TFTP/'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.5 |
bootRecordLoadTftpDirectControl for loading via directed TFTP. Corresponds
to SERVER LOAD PROTOCOL TFTPDIRECT and the presence
of 'TFTPDIRECT' following the label 'Load Protocols
Enabled:' in the SERVER BOOT CHARACTERISTICS
display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.6 |
bootRecordLoadLocalControl for loading from a local medium.
Corresponds to SERVER LOAD PROTOCOL LOCAL and the
presence of 'LOCAL' following the label 'Load
Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.7 |
bootRecordLoadMopControl for loading via DEC MOP. Corresponds to
SERVER LOAD PROTOCOL MOP and the presence of 'MOP'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.8 |
bootRecordLoadProprietaryControl for loading via ITouch-proprietary extended
MOP. Corresponds to SERVER LOAD PROTOCOL
PROPRIETARY and the presence of 'Proprietary'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.9 |
bootRecordLoadRarpTftpControl for loading via the combination of RARP and
TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP
and the presence of 'RARP/TFTP' following the label
'Load Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.10 |
bootRecordDumpBootpTftpControl for dumping via the combination of BOOTP
and TFTP. Corresponds to SERVER DUMP PROTOCOL
BOOTPTFTP and the presence of 'BOOTP/TFTP' following
the label 'Dump Protocols Enabled:' in the SERVER
BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.11 |
bootRecordDumpLocalControl for dumping to a local medium. Corresponds
to SERVER DUMP PROTOCOL LOCAL and the presence of
'Local' following the label 'Dump Protocols
Enabled:' in the SERVER BOOT CHARACTERISTICS
display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.12 |
bootRecordDumpMopControl for dumping via DEC MOP. Corresponds to
SERVER DUMP PROTOCOL MOP and the presence of 'MOP'
following the label 'Dump Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.13 |
bootRecordDumpProprietaryControl for dumping via ITouch-proprietary extended
MOP. Corresponds to SERVER DUMP PROTOCOL
PROPRIETARY and the presence of 'Proprietary'
following the label 'Dump Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.14 |
bootRecordDumpRarpTftpControl for dumping via the combination of RARP and
TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP
and the presence of 'RARP/TFTP' following the label
'Dump Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.15 |
bootRecordParamBootpTftpControl for loading parameters via the combination
of BOOTP and TFTP. Corresponds to SERVER PARAMETER
PROTOCOL MOP and the presence of 'BOOTP/TFTP'
following the label 'Parameter Protocols Enabled:'
in the SERVER BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.16 |
bootRecordParamLocalControl for loading parameters from a local medium.
Corresponds to SERVER PARAMETER PROTOCOL LOCAL and
the presence of 'LOCAL' following the label
'Parameter Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.17 |
bootRecordParamMopControl for loading parameters via DEC MOP.
Corresponds to SERVER PARAMETER PROTOCOL MOP and the
presence of 'MOP' following the label 'Parameter
Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.18 |
bootRecordParamProprietaryControl for loading parameters via
ITouch-proprietary extended MOP. Corresponds to
SERVER PARAMETER PROTOCOL PROPRIETARY and the
presence of 'Proprietary' following the label
'Parameter Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.19 |
bootRecordParamRarpTftpControl for loading parameters via the combination
of RARP and TFTP. Corresponds to SERVER PARAMETER
PROTOCOL RARPTFTP and the presence of 'RARP/TFTP'
following the label 'Parameter Protocols Enabled:'
in the SERVER BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.20 |
bootRecordStatusThe status of the entry. Set to 'disabled' to
disable the entry.rw Enumeration .1.3.6.1.4.1.33.1.37.1.21 |
bootRecordMopFileThe software file name to request for down-line
load of the server via MOP or XMOP.rw DisplayString .1.3.6.1.4.1.33.1.37.1.22 |
bootRecordInternetAddressThe internet address of the system is to use for
itself when loading via TFTP. The value 0.0.0.0
indicates default action.rw IpAddress .1.3.6.1.4.1.33.1.37.1.23 |
bootRecordParamTftpDirectControl for loading parameters via the protocol
DTFTP. Corresponds to SERVER PARAMETER
PROTOCOL DTFTP and the presence of 'DTFTP'
following the label 'Parameter Protocols Enabled:'
in the SERVER BOOT CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.37.1.24 |
bootRecordInternetDelimiterThe character separating the load file directory name
from the file name.rw DisplayString .1.3.6.1.4.1.33.1.37.1.25 |
sysLastAgentErrorThe most recent error the agent encountered in
attempting to satisfy an SNMP request. Reading this
value has the side effect of resetting it to
'noError'.ro Enumeration .1.3.6.1.4.1.33.1.38 |
sysRcpMulticastControl for sending of the MOP RCP system identifier
message. Corresponds directly to the presence of 'RCP
Multicast' under the label 'Enabled Characteristics'
in the SERVER CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.40 |
sysTimeServerAddressThe address of the time server, either an
IpAddr or an ethernet address.ro TypedAddress .1.3.6.1.4.1.33.1.41 |
sysTimeServerConfiguredAddressThe address of a configured time server (, either an
IpAddr or an ethernet address).rw TypedAddress .1.3.6.1.4.1.33.1.46 |
sysTimeServerConfiguredStatusControl whether the sysTimeServerConfiguredAddress is
the only time server used to obtain the time (REQUIRED),
the first time server used to obtain the time (ENABLED),
or not used to obtain the time (DISABLED).rw Enumeration .1.3.6.1.4.1.33.1.47 |
sysBootRecordOverrideDefinedAddressControl to override the internally defined Internet address
with that obtained from the bootp loading protocol.rw Enumeration .1.3.6.1.4.1.33.1.48 |
sysBootRecordMessageEnableControl to display load status messages during reboot.
Corresponds directly to the value labeled 'Status Message:'
in the SERVER LOADDUMP display.rw Enumeration .1.3.6.1.4.1.33.1.49 |
sysBootRecordParamDefaultsControl to use default parameters upon the next reboot
after which time this control reverts to disabled. This
control only applies to stand-alone devices. Corresponds
directly to the value labeled 'Default Parameters:'
in the SERVER LOADDUMP display.rw Enumeration .1.3.6.1.4.1.33.1.50 |
sysLoginAuthFailureTrapTypeIndicates the type of authentication failure which last
occurred.ro Enumeration .1.3.6.1.4.1.33.1.78 |
sysLoginAuthTrapIdentityAn identification string for the circuit or port where an
authentication failure last occurred.ro DisplayString .1.3.6.1.4.1.33.1.81 |
sysLocalScriptServerControl to allow script serving for this system
from a script residing in a local flash card.rw Enumeration .1.3.6.1.4.1.33.1.82 |
sysInReachManagementSecurityStatusIndicates whether per port authentication is in use. This
includes username, password, privilege level, and list of
power outlets controlled by that user, or console
connections allowed from that port.ro Enumeration .1.3.6.1.4.1.33.1.83 |
sysProductNameDisplays the product name of this system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33.1.84 |
sysModemPresentIndicates whether this system has a built-in
modem.ro Enumeration .1.3.6.1.4.1.33.1.85 |
sysCauseActionA control for toggling the cause action feature.
Corresponds directly to the presence of 'Trigger/Action'
under the label 'Enabled Characteristics:' in the SERVER
CHARACTERISTICS display. The desired change will not take
effect until the next system initialization.rw Enumeration .1.3.6.1.4.1.33.1.86 |
sysWebServerConfigAdminStatusA control for bring the web server up or down.
Corresponds directly to the presence of 'Web Server'
under the label 'Enabled Characteristics:' in the SERVER
CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.1.87 |
sysTl1SourceIdentifierThe source identifier (SID) is the server name used by
TL1 to identify the server.rw DisplayString .1.3.6.1.4.1.33.1.88 |
sysInitializeDelayParameterControl to begin the system initialization process
providing that at least one parameter server is
current. Corresponds directly to the INITIALIZE DELAY
PARAMETER command. In response to a get-request or
get-next-request, the agent always returns 'ready' for
this value.rw Enumeration .1.3.6.1.4.1.33.1.89 |