ITOUCH-LINK-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
28
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
xLink OBJECT IDENTIFIER .1.3.6.1.4.1.33.24 |
RFC1213-MIB Unknown .1.3.6.1.4.1.33.24 |
xLinkBasic OBJECT IDENTIFIER .1.3.6.1.4.1.33.24.1 |
linkTableA list of links. SEQUENCE OF LinkEntry .1.3.6.1.4.1.33.24.1.1 |
linkEntryLink entry. LinkEntry .1.3.6.1.4.1.33.24.1.1.1 |
linkNoBuffersThe number of packets discarded because of lack of
buffers.ro Counter .1.3.6.1.4.1.33.24.1.1.1.1 |
linkDelayExceededThe number of packets discarded because they were
held to long.ro Counter .1.3.6.1.4.1.33.24.1.1.1.2 |
linkOutputQFullThe number of packets discarded because the output
queue was full.ro Counter .1.3.6.1.4.1.33.24.1.1.1.3 |
linkDownTimeTotal number of seconds that the link has been
down.ro Counter .1.3.6.1.4.1.33.24.1.1.1.4 |
linkDownCountNumber of times that the link has been down.ro Counter .1.3.6.1.4.1.33.24.1.1.1.5 |
linkDownLastStartValue of sysUpTime when the link last went down.
If the link is up the value is 0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.24.1.1.1.6 |
linkStatusThe status of the linkro Enumeration .1.3.6.1.4.1.33.24.1.1.1.7 |
linkLostBuffersNumber of packets discarded because of lost
buffersro Counter .1.3.6.1.4.1.33.24.1.1.1.8 |
linkResourceTableA list of link resources. SEQUENCE OF LinkResourceEntry .1.3.6.1.4.1.33.24.1.2 |
linkResourceEntrylink entry. LinkResourceEntry .1.3.6.1.4.1.33.24.1.2.1 |
linkResourceTypeThe resource type.ro Enumeration .1.3.6.1.4.1.33.24.1.2.1.1 |
linkResourceCurrentThe current percent of the resource used.ro Gauge .1.3.6.1.4.1.33.24.1.2.1.2 |
linkResourceHighThe highest percent of the resource used.ro Gauge .1.3.6.1.4.1.33.24.1.2.1.3 |
linkResourceAverageThe average percent of the resource used.ro Gauge .1.3.6.1.4.1.33.24.1.2.1.4 |
xWan OBJECT IDENTIFIER .1.3.6.1.4.1.33.24.3 |
wanTableA list of WANs. SEQUENCE OF WanEntry .1.3.6.1.4.1.33.24.3.1 |
wanEntryWAN entry. WanEntry .1.3.6.1.4.1.33.24.3.1.1 |
wanProtocolControls the protocol run on the link, changes
ifType, typically to 'other'.rw Enumeration .1.3.6.1.4.1.33.24.3.1.1.1 |
wanCompressionAdminStatusControls whether link compression will be run if
the link is running the xyplex protocol. Auto will
enable compression for links slower than 67000.rw Enumeration .1.3.6.1.4.1.33.24.3.1.1.2 |
wanMaxForwardDelayThe number of milliseconds that a packet may be
held on the Wan link before it will be discarded.
The value 0 indicates no limit.rw INTEGER ( 0 | 500..32000 ) (Preferred) SYNTAX INTEGER ( 0..32000 ) .1.3.6.1.4.1.33.24.3.1.1.3 |
wanMaxMultiForwardDelayThe number of milliseconds that a multicast packet
may be held on the Wan link before it will be
discarded. The value 0 indicates no delay.rw INTEGER ( 0 | 350..32000 ) (Preferred) SYNTAX INTEGER ( 0..32000 ) .1.3.6.1.4.1.33.24.3.1.1.4 |
wanAdminSpeedThe speed that the software should use for the wan
link. The value 0 indicates that the measured speed
should be used.rw INTEGER .1.3.6.1.4.1.33.24.3.1.1.5 |
wanCompressionOperStatusIf the link is running the Xyplex protocol,
indicates whether link compression is running.ro Enumeration .1.3.6.1.4.1.33.24.3.1.1.6 |