ITOUCH-ISIS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
196
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
196 total| Object Name |
|---|
xIsis OBJECT IDENTIFIER .1.3.6.1.4.1.33.26 |
RFC1155-SMI Unknown .1.3.6.1.4.1.33.26 |
xIsisSystem OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.1 |
xIsisSysTableThe set of instances of the Integrated IS-IS protocol
existing on the system. SEQUENCE OF XIsisSysEntry .1.3.6.1.4.1.33.26.1.1 |
xIsisSysEntryEach row defines information specific to a single
instance of the protocol existing on the system. XIsisSysEntry .1.3.6.1.4.1.33.26.1.1.1 |
xIsisSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour.ro INTEGER .1.3.6.1.4.1.33.26.1.1.1.1 |
xIsisSysExistStateThe validity of this instance of the Integrated IS-IS
protocol. This object follows the existenceState
behaviour.ro Enumeration .1.3.6.1.4.1.33.26.1.1.1.2 |
xIsisSysVersionThe version number of the IS-IS protocol to which this
instance conforms. This value must be set by the
implementation when the row is valid.ro INTEGER .1.3.6.1.4.1.33.26.1.1.1.3 |
xIsisSysTypeThe type of this instance of the Integrated IS-IS
protocol. This object follows the
replaceOnlyWhileDisabled behaviour.rw Enumeration .1.3.6.1.4.1.33.26.1.1.1.4 |
xIsisSysNETThe ID for this instance of the Integrated IS-IS
protocol. This value is appended to each of the
instance's area addresses to form the Network Entity
Titles valid for this instance. The derivation of a value
for this object is implementation-specific. Some
implementations may assign values and not permit write
access, others may require the value to be set manually.ro OCTET STRING .1.3.6.1.4.1.33.26.1.1.1.5 |
xIsisSysMaxPathSplitsMaximum number of paths with equal routing metric value
which it is permitted to split between. This object
follows the replaceOnlyWhileDisabled behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.6 |
xIsisSysMinLSPTransIntMinimum interval, in seconds, between re-transmission of
an LSP. This object follows the resettingTimer
behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.7 |
xIsisSysMaxLSPGenIntMaximum interval, in seconds, between generated LSPs by
this instance. This object follows the resettingTimer
behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.8 |
xIsisSysMinBroadLSPTransIntMinimum interval, in milliseconds, between transmission
of LSPs on a broadcast circuit. This object follows the
resettingTimer behaviour. This timer shall be capable of
a resolution not coarser than 10 milliseconds.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.9 |
xIsisSysCompSNPIntInterval, in seconds, between generation of Complete
Sequence Numbers PDUs by a designated Intermediate System
on a broadcast circuit. This object follows the
resettingTimer behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.10 |
xIsisSysOrigL1LSPBuffSizeThe maximum size of Level 1 LSPs and SNPs originated by
this instance. This object follows the
replaceOnlyWhileDisabled behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.11 |
xIsisSysMaxAreaAddrThe maximum number of area addresses to be permitted for
the area in which this instance exists. Note that all
Intermediate Systems in the same area must have the same
value configured for this attribute if correct operation
is to be assumed. This object follows the
replaceOnlyWhileDisabled behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.12 |
xIsisSysMinLSPGenIntMinimum interval, in seconds, between successive
generation of LSPs with the same LSPID by this instance.
This object follows the resettingTimer behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.13 |
xIsisSysPollESHelloRateThe value, in seconds, to be used for the suggested ES
configuration timer in ISH PDUs when soliciting the ES
configuration.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.14 |
xIsisSysPartSNPIntMinimum interval between sending Partial Sequence Number
PDUs. This object follows the resettingTimer behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.15 |
xIsisSysWaitTimeNumber of seconds to delay in waiting state before
entering on state. This object follows the resettingTimer
behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.16 |
xIsisSysDRISISHelloTimerThe interval, in seconds, between the generation of IIH
PDUs by the designated IS on a LAN. This object follows
the resettingTimer behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.17 |
xIsisSysOperStateThe operational state of this instance of the Integrated
IS-IS protocol. Setting this object to the value on when
its current value is off enables operation of this
instance of the Integrated IS-IS protocol.rw Enumeration .1.3.6.1.4.1.33.26.1.1.1.18 |
xIsisSysL1StateThe state of the Level 1 database.ro Enumeration .1.3.6.1.4.1.33.26.1.1.1.19 |
xIsisSysCorrLSPsNumber of corrupted LSPs detected.ro Counter .1.3.6.1.4.1.33.26.1.1.1.20 |
xIsisSysL1LSPDbaseOloadsNumber of times the LSP L1 database has become
overloaded.ro Counter .1.3.6.1.4.1.33.26.1.1.1.21 |
xIsisSysManAddrsDropFromAreaNumber of times a manual address has been dropped from
the area.ro Counter .1.3.6.1.4.1.33.26.1.1.1.22 |
xIsisSysAttmptsToExMaxSeqNumNumber of times the IS has attempted to exceed the
maximum sequence number.ro Counter .1.3.6.1.4.1.33.26.1.1.1.23 |
xIsisSysSeqNumSkipsNumber of times a sequence number skip has occurred.ro Counter .1.3.6.1.4.1.33.26.1.1.1.24 |
xIsisSysOwnLSPPurgesNumber of times a zero-aged copy of the system's own LSP
is received from some other node.ro Counter .1.3.6.1.4.1.33.26.1.1.1.25 |
xIsisSysIDFieldLenMismatchesNumber of times a PDU is received with a different value
for ID field length to that of the receiving system.ro Counter .1.3.6.1.4.1.33.26.1.1.1.26 |
xIsisSysMaxAreaMisNumber of times a PDU is received with a different value
for MaximumAreaAddresses from that of the receiving
system.ro Counter .1.3.6.1.4.1.33.26.1.1.1.27 |
xIsisSysOrigL2LSPBuffSizeThe maximum size of Level 2 LSPs and SNPs originated by
this system. This object follows the
replaceOnlyWhileDisabled behaviour.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.28 |
xIsisSysL2StateThe state of the Level 2 database.ro Enumeration .1.3.6.1.4.1.33.26.1.1.1.29 |
xIsisSysL2LSPDbaseOloadsNumber of times the Level 2 LSP database has become
overloaded.ro Counter .1.3.6.1.4.1.33.26.1.1.1.30 |
xIsisSysMaxAreaCheckWhen on, enables checking of maximum area
addresses per IS version of ISO10589.rw INTEGER .1.3.6.1.4.1.33.26.1.1.1.31 |
xIsisManAreaAddrTableThe set of manual area addresses configured on this
Intermediate System. SEQUENCE OF XIsisManAreaAddrEntry .1.3.6.1.4.1.33.26.1.2 |
xIsisManAreaAddrEntryEach entry contains one area address manually configured
on this system XIsisManAreaAddrEntry .1.3.6.1.4.1.33.26.1.2.1 |
xIsisManAreaAddrSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour.ro INTEGER .1.3.6.1.4.1.33.26.1.2.1.1 |
xIsisManAreaAddrA manually configured area address for this system. This
object follows the index behaviour.ro OCTET STRING .1.3.6.1.4.1.33.26.1.2.1.2 |
xIsisManAreaAddrExistStateThe state of the xIsisManAreaAddrEntry. This object
follows the ExistenceState behaviour. If an attempt is
made to set this object to the value off when the
corresponding xIsisManAreaAddrEntry is the only valid
entry for this instance and when the corresponding ISIS
instance has xIsisSysOperState set to On then the attempt
is rejected.rw Enumeration .1.3.6.1.4.1.33.26.1.2.1.3 |
xIsisAreaAddrTableThe union of the sets of area addresses reported in all
Level 1 LSPs received by this instance of the protocol. SEQUENCE OF XIsisAreaAddrEntry .1.3.6.1.4.1.33.26.1.3 |
xIsisAreaAddrEntryEach entry contains one area address reported in a
Level 1 LSP received by this instance of the protocol. XIsisAreaAddrEntry .1.3.6.1.4.1.33.26.1.3.1 |
xIsisAreaAddrSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds.ro INTEGER .1.3.6.1.4.1.33.26.1.3.1.1 |
xIsisAreaAddrAn area address reported in a Level 1 LSP received by
this instance of the protocol.ro OCTET STRING .1.3.6.1.4.1.33.26.1.3.1.2 |
xIsisSysProtSuppTableThis table contains the manually configured set of
protocols supported by each instance of the Integrated
ISIS protocol. SEQUENCE OF XIsisSysProtSuppEntry .1.3.6.1.4.1.33.26.1.4 |
xIsisSysProtSuppEntryEach entry contains one protocol supported by an
instance of the Integrated ISIS protocol. XIsisSysProtSuppEntry .1.3.6.1.4.1.33.26.1.4.1 |
xIsisSysProtSuppSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour.ro INTEGER .1.3.6.1.4.1.33.26.1.4.1.1 |
xIsisSysProtSuppProtocolOne supported protocol. This object follows the index
behaviour.ro SupportedProtocol .1.3.6.1.4.1.33.26.1.4.1.2 |
xIsisSysProtSuppExistStateThe state of the xIsisSysProtSuppEntry. This object
follows the ExistenceState and
ReplaceOnlyWhileInstanceDisabled behaviours.rw ExistState .1.3.6.1.4.1.33.26.1.4.1.3 |
xIsisCirc OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.2 |
xIsisCircTableThe table of circuits used by each instance of
Integrated IS-IS on this system. SEQUENCE OF XIsisCircEntry .1.3.6.1.4.1.33.26.2.1 |
xIsisCircEntryAn xIsisCircEntry exists for each circuit used by
Integrated IS-IS on this system. XIsisCircEntry .1.3.6.1.4.1.33.26.2.1.1 |
xIsisCircSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour.ro INTEGER .1.3.6.1.4.1.33.26.2.1.1.1 |
xIsisCircIndexThe identifier of this circuit, unique within the
instance of the protocol. This object follows the index
behaviour.ro INTEGER .1.3.6.1.4.1.33.26.2.1.1.2 |
xIsisCircIfIndexThe value of ifIndex for the interface to which this
circuit corresponds. This object follows the
replaceOnlyWhileDisabled behaviour.ro INTEGER .1.3.6.1.4.1.33.26.2.1.1.3 |
xIsisCircOperStateThe operational state of the circuit. This object
follows the operationalState behaviour.rw Enumeration .1.3.6.1.4.1.33.26.2.1.1.4 |
xIsisCircExistStateThe existence state of this circuit. This object follows
the ExistenceState behaviour.ro Enumeration .1.3.6.1.4.1.33.26.2.1.1.5 |
xIsisCircTypeThe type of the circuit. This object follows the
replaceOnlyWhileDisabled behaviour. The type specified
must be compatible with the type of the interface defined
by the value of xIsisCircIfIndex.rw Enumeration .1.3.6.1.4.1.33.26.2.1.1.6 |
xIsisCircHelloTimerThe period, in seconds, between IIH PDUs. It is also
used as the period between ISH PDUs when polling the ES
configuration. This object follows the resettingTimer
behaviour.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.7 |
xIsisCircL1DefaultMetricThe default metric value of this circuit for Level 1
traffic. 0 means the IS will automatically generate Level 1 default
metric for the circuit.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.8 |
xIsisCircL1DelayMetricThe delay metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.9 |
xIsisCircL1ExpenseMetricThe expense metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.10 |
xIsisCircL1ErrorMetricThe error metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.11 |
xIsisCircExtDomainIf true, suppress normal transmission of and
interpretation of Intra-domain ISIS PDUs on this
circuit.rw Enumeration .1.3.6.1.4.1.33.26.2.1.1.12 |
xIsisCircAdjChangesThe number of times an adjacency state change has
occurred on this circuit.ro Counter .1.3.6.1.4.1.33.26.2.1.1.13 |
xIsisCircInitFailsThe number of times initialization of this circuit has
failed.ro Counter .1.3.6.1.4.1.33.26.2.1.1.14 |
xIsisCircRejAdjsThe number of times an adjacency has been rejected on
this circuit.ro Counter .1.3.6.1.4.1.33.26.2.1.1.15 |
xIsisCircOutCtrlPDUsThe number of IS-IS control PDUs sent on this circuit.ro Counter .1.3.6.1.4.1.33.26.2.1.1.16 |
xIsisCircInCtrlPDUsThe number of IS-IS control PDUs received on this
circuit.ro Counter .1.3.6.1.4.1.33.26.2.1.1.17 |
xIsisCircIDFieldLenMismatchesThe number of times an IS-IS control PDU with an ID
field length different to that for this system has been
received.ro Counter .1.3.6.1.4.1.33.26.2.1.1.18 |
xIsisCircL2DefaultMetricThe default metric value of this circuit for level 2
traffic. 0 means the IS will automatically generate the Level 2
default metric for this circuit.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.20 |
xIsisCircL2DelayMetricThe delay metric value of this circuit for level 2
traffic. The value of zero is reserved to indicate that
this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.21 |
xIsisCircL2ExpenseMetricThe expense metric value of this circuit for level 2
traffic. The value of zero is reserved to indicate that
this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.22 |
xIsisCircL2ErrorMetricThe error metric value of this circuit for level 2
traffic. The value of zero is reserved to indicate that
this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.23 |
xIsisCircManL2OnlyWhen true, indicates that this circuit is to be used
only for level 2. This object follows the
replaceOnlyWhileDisabled behaviour.rw Enumeration .1.3.6.1.4.1.33.26.2.1.1.24 |
xIsisCircL1ISPriorityThe priority for becoming LAN Level 1 Deignated
Intermediate System on a broadcast circuit.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.25 |
xIsisCircL1CircIDThe LAN ID allocated by the LAN Level 1 Designated
Intermediate System. Where this system is not aware of
the value (because it is not participating in the Level 1
Designated Intermediate System election), this object has
the value which would be proposed for this circuit (i.e.
the concatenation of the local system ID and the one
octet local Circuit ID for this circuit.ro OCTET STRING .1.3.6.1.4.1.33.26.2.1.1.26 |
xIsisCircL1DesISThe ID of the LAN Level 1 Designated Intermediate System
on this circuit. If, for any reason this system is not
partaking in the relevant Designated Intermediate System
election process, then the value returned is the zero
length OCTET STRING.ro OCTET STRING .1.3.6.1.4.1.33.26.2.1.1.27 |
xIsisCircLANL1DesISChangesThe number of times the LAN Level 1 Designated
Intermediate System has changed.ro Counter .1.3.6.1.4.1.33.26.2.1.1.28 |
xIsisCircL2ISPriorityThe priority for becoming LAN level 2 Designated
Intermediate System.rw INTEGER .1.3.6.1.4.1.33.26.2.1.1.29 |
xIsisCircL2CircIDThe LAN ID allocated by the LAN Level 2 Designated
Intermediate System. Where this system is not aware of
this value (because it is not participating in the Level
2 Designated Intermediate System election), this object
has the value which would be proposed for this circuit
(i.e. the concatenation of the local system ID and the
one octet local Circuit ID for this circuit.ro OCTET STRING .1.3.6.1.4.1.33.26.2.1.1.30 |
xIsisCircL2DesISThe ID of the LAN Level 2 Designated Intermediate System
on this circuit. If, for any reason, this system is not
partaking in the relevant Designated Intermediate System
election process, then the value returned is the zero
length OCTET STRING.ro OCTET STRING .1.3.6.1.4.1.33.26.2.1.1.31 |
xIsisCircLANL2DesISChangesThe number of times the LAN Level 2 Designated
Intermediate System has changed.ro Counter .1.3.6.1.4.1.33.26.2.1.1.32 |
xIsisCircISTableThe set of objects controlling the operation of the IS
functions of the ES-IS protocol (ISO 9542) on each
circuit over which ISIS is run. SEQUENCE OF XIsisCircISEntry .1.3.6.1.4.1.33.26.2.2 |
xIsisCircISEntryEach entry contains objects controlling the operation of
the IS functions of the ES-IS protocol (ISO 9542) on one
circuit. XIsisCircISEntry .1.3.6.1.4.1.33.26.2.2.1 |
xIsisCircISSysInstanceThe identifier of the Integrated IS-IS instance to which
this row corresponds. This object follows the index and
manualOrAutomatic behaviours.ro INTEGER .1.3.6.1.4.1.33.26.2.2.1.1 |
xIsisCircISIndexThe unique identifier of this row. This value is the
same as the value of the ifIndex object which identifies
the interface which corresponds to this circuit. This
object follows the index behaviour.ro INTEGER .1.3.6.1.4.1.33.26.2.2.1.2 |
xIsisCircISExistStateThe existence state of this row. This object follows the
ExistenceState behaviour.ro Enumeration .1.3.6.1.4.1.33.26.2.2.1.3 |
xIsisCircISOperStateThe operational state of the row. This object follows
the operationalState behaviour.rw Enumeration .1.3.6.1.4.1.33.26.2.2.1.4 |
xIsisCircISHoldTimerMultThe factor to derive holding timer from configuration
timer. This value when multipled by a configuration timer
yields the value of the holding timer parameter issued
with configuration information. The semantics of this
parameter are such that it is permissible to add a delta
value to the result to compensate for possible delays and
imprecision of timers. The result of the calculation is
truncated, upon overflow, to the maximum value for the
parameter permitted by the protocol (65535).ro INTEGER .1.3.6.1.4.1.33.26.2.2.1.5 |
xIsisCircISConfTimerValue in seconds for the ISO 9542 IS configuration
timer. It is used to determine how often an IS reports
configuration information to ESs. This object follows the
resettingTimer behaviour.rw INTEGER .1.3.6.1.4.1.33.26.2.2.1.6 |
xIsisCircISSuggESConfTimerValue to be used for the ISO 9542 suggested ES
configuration timer value (in seconds), advertised in IS
Hellos generated by the system on this circuit. This
object follows the resettingTimer behaviour.rw INTEGER .1.3.6.1.4.1.33.26.2.2.1.7 |
xIsisCircISRedHoldTimeThe holding time (in seconds) to be specified in
Redirect PDUs generated by the system on this circuit.rw INTEGER .1.3.6.1.4.1.33.26.2.2.1.8 |
xIsisCircISESReachChgsCount of the number of changes in reachability of End
Systems from this circuit.ro Counter .1.3.6.1.4.1.33.26.2.2.1.9 |
xIsisCircISInv9542PDUsCounter of invalid 9542 PDUs received. This is the
number of ISO 9452 PDUs received which are discarded as a
result of the PDU Header Error Detection or Protocol
Error Processing Functions specified in ISO 9542.ro Counter .1.3.6.1.4.1.33.26.2.2.1.10 |
xIsisCircClnsTableThe set of objects controlling the operation of the
CLNS protocol (ISO 8473) on each
circuit over which ISIS is run. SEQUENCE OF XIsisCircClnsEntry .1.3.6.1.4.1.33.26.2.3 |
xIsisCircClnsEntryEach entry contains objects controlling the operation of
the CLNS protocol (ISO 8473) on one
circuit. XIsisCircClnsEntry .1.3.6.1.4.1.33.26.2.3.1 |
xIsisCircClnsSysInstanceThe identifier of the Integrated IS-IS instance to which
this row corresponds. This object follows the index and
manualOrAutomatic behaviours.ro INTEGER .1.3.6.1.4.1.33.26.2.3.1.1 |
xIsisCircClnsIndexThe unique identifier of this row. This value is the
same as the value of the ifIndex object which identifies
the interface which corresponds to this circuit. This
object follows the index behaviour.ro INTEGER .1.3.6.1.4.1.33.26.2.3.1.2 |
xIsisCircClnsExistStateThe existence state of this row. This object follows the
ExistenceState behaviour.ro Enumeration .1.3.6.1.4.1.33.26.2.3.1.3 |
xIsisCircClnsOperStateThe operational state of the row. This object follows
the operationalState behaviour.rw Enumeration .1.3.6.1.4.1.33.26.2.3.1.4 |
xIsisCircClnsRxPDUsCounter of number of CLNS PDUs received on this
circuit.ro Counter .1.3.6.1.4.1.33.26.2.3.1.5 |
xIsisCircClnsTxPDUsCounter of number of CLNS PDUs transmitted on this
circuit.ro Counter .1.3.6.1.4.1.33.26.2.3.1.6 |
xIsisISAdj OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.3 |
xIsisISAdjTableThe table of adjacencies to Intermediate Systems. SEQUENCE OF XIsisISAdjEntry .1.3.6.1.4.1.33.26.3.1 |
xIsisISAdjEntryEach entry corresponds to one adjacency to an
Intermediate System on this system. XIsisISAdjEntry .1.3.6.1.4.1.33.26.3.1.1 |
xIsisISAdjSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds.ro INTEGER .1.3.6.1.4.1.33.26.3.1.1.1 |
xIsisISAdjCircIndexThe identifier of the Circuit which is the parent of the
IS adjacency.ro INTEGER .1.3.6.1.4.1.33.26.3.1.1.2 |
xIsisISAdjIndexA unique value identifying the IS adjacency from all
other such adjacencies on this circuit. This value is
assigned by the system when the adjacency is created
automatically.ro INTEGER .1.3.6.1.4.1.33.26.3.1.1.3 |
xIsisISAdjStateThe state of the adjacencyro Enumeration .1.3.6.1.4.1.33.26.3.1.1.4 |
xIsisISAdjNeighSNPAAddressThe SNPA address of the neighboring system.ro OCTET STRING .1.3.6.1.4.1.33.26.3.1.1.5 |
xIsisISAdjNeighSysTypeThe type of the neighboring system.ro Enumeration .1.3.6.1.4.1.33.26.3.1.1.6 |
xIsisISAdjNeighSysIDThe system ID of the neighboring Intermediate System set
from the source ID field of the neighbor's IIH PDUs.ro OCTET STRING .1.3.6.1.4.1.33.26.3.1.1.7 |
xIsisISAdjUsageThe usage of the adjacency. An adjacency of type level1
will be used for level 1 traffic only. An adjacency of
type level2 will be used for level 2 traffic only. An
adjacency of type level1and2 will be used for both level
1 and level 2 traffic. There may be two adjacencies (of
types level1 and level2) between the same pair of
Intermediate Systems.ro Enumeration .1.3.6.1.4.1.33.26.3.1.1.8 |
xIsisISAdjHoldTimerThe holding time for this adjacency updated from
received IIH PDUs.ro INTEGER .1.3.6.1.4.1.33.26.3.1.1.9 |
xIsisISAdjNeighPriorityPriority of the neighboring Intermediate System for
becoming the LAN Level 1 Designated Intermediate System
if the value of xIsisISAdjNeighSysType is
L1IntermediateSystem or LAN Level 2 Designated
Intermediate System if the value of
xIsisISAdjNeighSysType is L2IntermediateSystem.ro INTEGER .1.3.6.1.4.1.33.26.3.1.1.10 |
xIsisISAdjAreaAddrTableThis table contains the set of Area Addresses of
neighboring Intermediate Systems as reported in received
IIH PDUs. SEQUENCE OF XIsisISAdjAreaAddrEntry .1.3.6.1.4.1.33.26.3.2 |
xIsisISAdjAreaAddrEntryEach entry contains one Area Address reported by a
neighboring Intermediate System in its IIH PDUs. XIsisISAdjAreaAddrEntry .1.3.6.1.4.1.33.26.3.2.1 |
xIsisISAdjAreaAddrSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds.ro INTEGER .1.3.6.1.4.1.33.26.3.2.1.1 |
xIsisISAdjAreaAddrCircIndexThe identifier of the Circuit which is the parent of the
IS adjacency to which this Area Address entry
corresponds.ro INTEGER .1.3.6.1.4.1.33.26.3.2.1.2 |
xIsisISAdjAreaAddrAdjIndexThe identifier of the IS adjacency to which this entry
belongs.ro INTEGER .1.3.6.1.4.1.33.26.3.2.1.3 |
xIsisISAdjAreaAddressOne Area Address as reported in IIH PDUs received from
the neighbor.ro OCTET STRING .1.3.6.1.4.1.33.26.3.2.1.4 |
xIsisISAdjIPAddrTableThis table contains the set of IP Addresses of
neighboring Intermediate Systems as reported in received
IIH PDUs. SEQUENCE OF XIsisISAdjIPAddrEntry .1.3.6.1.4.1.33.26.3.3 |
xIsisISAdjIPAddrEntryEach entry contains one IP Address reported by a
neighboring Intermediate System in its IIH PDUs. XIsisISAdjIPAddrEntry .1.3.6.1.4.1.33.26.3.3.1 |
xIsisISAdjIPAddrSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds.ro INTEGER .1.3.6.1.4.1.33.26.3.3.1.1 |
xIsisISAdjIPAddrCircIndexThe identifier of the Circuit which is the parent of the
IS adjacency to which this IP Address entry corresponds.ro INTEGER .1.3.6.1.4.1.33.26.3.3.1.2 |
xIsisISAdjIPAddrAdjIndexThe identifier of the IS adjacency to which this entry
belongs.ro INTEGER .1.3.6.1.4.1.33.26.3.3.1.3 |
xIsisISAdjIPAddressOne IP Address as reported in IIH PDUs received from the
neighbor.ro IpAddress .1.3.6.1.4.1.33.26.3.3.1.4 |
xIsisISAdjProtSuppTableThis table contains the set of protocols supported by
neighboring Intermediate Systems as reported in received
IIH PDUs. SEQUENCE OF XIsisISAdjProtSuppEntry .1.3.6.1.4.1.33.26.3.4 |
xIsisISAdjProtSuppEntryEach entry contains one protocol supported by a
neighboring Intermediate System as reported in its IIH
PDUs. XIsisISAdjProtSuppEntry .1.3.6.1.4.1.33.26.3.4.1 |
xIsisISAdjProtSuppSysInstanceThe unique identifier of the Integrated IS-IS instance
to which this row corresponds.ro INTEGER .1.3.6.1.4.1.33.26.3.4.1.1 |
xIsisISAdjProtSuppCircIndexThe identifier of the Circuit which is the parent of the
IS adjacency to which this supported protocol entry
corresponds.ro INTEGER .1.3.6.1.4.1.33.26.3.4.1.2 |
xIsisISAdjProtSuppAdjIndexThe identifier the IS adjacency to which this entry
corresponds.ro INTEGER .1.3.6.1.4.1.33.26.3.4.1.3 |
xIsisISAdjProtSuppProtocolOne supported protocol as reported in IIH PDUs received
from the neighbor.ro SupportedProtocol .1.3.6.1.4.1.33.26.3.4.1.4 |
xIsisESAdj OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.4 |
xIsisESAdjTableThe table of End System IDs of neighboring End Systems
as reported in their ESH PDUs or as configured manually SEQUENCE OF XIsisESAdjEntry .1.3.6.1.4.1.33.26.4.1 |
xIsisESAdjEntryEach entry contains one End System ID of a neighboring
End System as reported in an ESH PDU or as configured
manually. XIsisESAdjEntry .1.3.6.1.4.1.33.26.4.1.1 |
xIsisESAdjSysInstanceThe identifier of the Integrated IS-IS instance to which
this row corresponds. This object follows the index and
manualOrAutomatic behaviours.ro INTEGER .1.3.6.1.4.1.33.26.4.1.1.1 |
xIsisESAdjCircIndexThe identifier of the Circuit which is the parent of the
ES adjacency to which this End System ID entry
corresponds. This object follows the index and
manualOrAutomatic behaviours.ro INTEGER .1.3.6.1.4.1.33.26.4.1.1.2 |
xIsisESAdjIndexThe identifier of the ES adjacency to which this entry
belongs. This object follows the index and
manualOrAutomatic behaviours.ro INTEGER .1.3.6.1.4.1.33.26.4.1.1.3 |
xIsisESAdjTypeThe indication of whether this adjacency was created
manually by management action or automatically by the
implementation.ro Enumeration .1.3.6.1.4.1.33.26.4.1.1.4 |
xIsisESAdjStateThe state of the adjacency. Adjacencies created manually
always have this value set to up.rw Enumeration .1.3.6.1.4.1.33.26.4.1.1.5 |
xIsisESAdjNeighSNPAAddressThe SNPA address of the neighboring system. This object
follows the manualOrAutomatic behaviour.rw OCTET STRING .1.3.6.1.4.1.33.26.4.1.1.6 |
xIsisESAdjExistStateThe existence state of this ES Adjacency. This object
follows the ExistenceState behaviour. This object follows
the manualOrAutomatic behaviour.rw Enumeration .1.3.6.1.4.1.33.26.4.1.1.7 |
xIsisESAdjESIDAn End System ID of a neighboring End System. This
object follows the index and manualOrAutomatic
behaviour.ro OCTET STRING .1.3.6.1.4.1.33.26.4.1.1.8 |
xIsisReachAddr OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.5 |
xIsisRATableThe table of Reachable Addresses to NSAPs or Address
Prefixes. SEQUENCE OF XIsisRAEntry .1.3.6.1.4.1.33.26.5.1 |
xIsisRAEntryEach entry defines a Reachable Address to a NSAP or
Address Prefix. XIsisRAEntry .1.3.6.1.4.1.33.26.5.1.1 |
xIsisRASysInstanceThe identifier of the Integrated IS-IS instance to which
this row corresponds. This object follows the index and
manualOrAutomatic behaviours.ro INTEGER .1.3.6.1.4.1.33.26.5.1.1.1 |
xIsisRACircIndexThe identifier of the Circuit over which this
destination is reachable. This object follows the index
and manualOrAutomatic behaviours.ro INTEGER .1.3.6.1.4.1.33.26.5.1.1.2 |
xIsisRAIndexThe identifier for this xIsisRAEntry. This value must be
unique amongst all Reachable Addresses on the same parent
Circuit. This object follows the index and
manualOrAutomatic behaviours.ro INTEGER .1.3.6.1.4.1.33.26.5.1.1.3 |
xIsisRAExistStateThe existence state of this Reachable Address. This
object follows the ExistenceState and manualOrAutomatic
behaviours.rw Enumeration .1.3.6.1.4.1.33.26.5.1.1.4 |
xIsisRAOperStateThe operational state of the Reachable Address. This
object follows the operationalState and manualOrAutomatic
behaviours.rw Enumeration .1.3.6.1.4.1.33.26.5.1.1.5 |
xIsisRAAddrPrefixThe destination of this Reachable Address. This is an
Address Prefix. This object follows the
replaceOnlyWhileDisabled and manualOrAutomatic
behaviours.rw OCTET STRING .1.3.6.1.4.1.33.26.5.1.1.6 |
xIsisRAMapTypeThe type of mapping to be employed to ascertain the SNPA
Address which should be used in forwarding PDUs for this
Reachable Address prefix. This object follows the
manualOrAutomatic behaviour. The following values of
mapping type are defined:
none: The mapping is null because the neighbor SNPA is
implicit by nature of the subnetwork (e.g. a
point-to-point linkage).
explicit: The subnetwork addresses in the object
xIsisRASNPAAddress is to be used.
extractIDI: The SNPA is embedded in the IDI of the
destination NSAP Address. The mapping algorithm
extracts the SNPA to be used according to the format
and encoding rules of ISO8473/Add2. This SNPA
extraction algorithm can be used in conjunction with
Reachable Address prefixes from the X.121, F.69, E.163
and E.164 addressing subdomains.
extractDSP: All, or a suffix, of the SNPA is embedded
in the DSP of the destination address. This SNPA
extraction algorithm extracts the embedded subnetwork
addressing information by performing a logical AND of
the xIsisRASNPAMask object value with the destination
address. The part of the SNPA extracted from the
destination NSAP is appended to the xIsisRASNPAPrefix
object value to form the next hop subnetwork
addressing information.rw Enumeration .1.3.6.1.4.1.33.26.5.1.1.7 |
xIsisRADefMetricThe default metric value for reaching the specified
prefix over this circuit. This object follows the
manualOrAutomatic behaviour.rw INTEGER .1.3.6.1.4.1.33.26.5.1.1.8 |
xIsisRADelMetricThe delay metric for reaching the specified prefix over
this circuit. This object follows the manualOrAutomatic
behaviour. The value zero is reserved to indicate that
this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.5.1.1.9 |
xIsisRAExpMetricThe expense metric for reaching the specified prefix
over this circuit. This object follows the
manualOrAutomatic behaviour. The value zero is reserved
to indicate that this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.5.1.1.10 |
xIsisRAErrMetricThe error metric for reaching the specified prefix over
this circuit. This object follows the manualOrAutomatic
behaviour. The value zero is reserved to indicate that
this metric is not supported.rw INTEGER .1.3.6.1.4.1.33.26.5.1.1.11 |
xIsisRADefMetricTypeIndicates whether the default metric is internal or
external. This object follows the manualOrAutomatic
behaviour.rw Enumeration .1.3.6.1.4.1.33.26.5.1.1.12 |
xIsisRADelMetricTypeIndicates whether the delay metric is internal or
external. This object follows the manualOrAutomatic
behaviour.rw Enumeration .1.3.6.1.4.1.33.26.5.1.1.13 |
xIsisRAExpMetricTypeIndicates whether the expense metric is internal or
external. This object follows the manualOrAutomatic
behaviour.rw Enumeration .1.3.6.1.4.1.33.26.5.1.1.14 |
xIsisRAErrMetricTypeIndicates whether the error metric is internal or
external. This object follows the manualOrAutomatic
behaviour.rw Enumeration .1.3.6.1.4.1.33.26.5.1.1.15 |
xIsisRASNPAAddressThe SNPA Address to which a PDU may be forwarded in
order to reach a destination which matches the address
prefix of the Reachable Address. This object follows the
manualOrAutomatic behaviour.rw OCTET STRING .1.3.6.1.4.1.33.26.5.1.1.16 |
xIsisRASNPAMaskA bit mask with 1 bits indicating the positions in the
effective destination address from which embedded SNPA
information is to be extracted. For the extraction the
first octet of the xIsisRASNPAMask object value is aligned
with the first octet (AFI) of the NSAP Address. If the
xIsisRASNPAMask object value and NSAP Address are of
different lengths, the shorter of the two is logically
padded with zeros before performing the extraction. This
object follows the manualOrAutomatic behaviour.rw OCTET STRING .1.3.6.1.4.1.33.26.5.1.1.17 |
xIsisRASNPAPrefixA fixed SNPA prefix for use when the xIsisRAMapType is
extractDSP. The SNPA Address to use is formed by
concatenating the fixed SNPA prefix with a variable SNPA
part that is extracted from the effective destination
address. For Reachable Address prefixes in which the
entire SNPA is embedded in the DSP the SNPA Prefix shall
be null. This object follows the manualOrAutomatic
behaviour.rw OCTET STRING .1.3.6.1.4.1.33.26.5.1.1.18 |
xIsisRATypeThe type of Reachable address. Those of type
manual are created by the network manager. Those
of type automatic are created through propogation
of routing information from another routing
protocol (eg. IDRP).ro Enumeration .1.3.6.1.4.1.33.26.5.1.1.20 |
xIsisCLNPDest OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.7 |
xIsisL1CLNPDestTableThe Level 1 CLNP Destination Table records information
about each end system ID destination known to the
Intermediate System. SEQUENCE OF XIsisL1CLNPDestEntry .1.3.6.1.4.1.33.26.7.1 |
xIsisL1CLNPDestEntryEach entry records information about one CLNP end system
ID destination known to the Intermediate System. XIsisL1CLNPDestEntry .1.3.6.1.4.1.33.26.7.1.1 |
xIsisL1CLNPSysInstanceIf the value of xIsisL1CLNPRouteSource is manual or
level1 then this is the identifier of the Integrated
IS-IS Level 1 instance from which this reachability
information was learned, otherwise this value is zero.ro INTEGER .1.3.6.1.4.1.33.26.7.1.1.1 |
xIsisL1CLNPRouteDestThe destination end system ID.ro OCTET STRING .1.3.6.1.4.1.33.26.7.1.1.2 |
xIsisL1CLNPRouteMetricQOSThe QOS metric for this destination.ro Enumeration .1.3.6.1.4.1.33.26.7.1.1.3 |
xIsisL1CLNPRouteMetricTypeIndicates whether the metric has an external component
or notro Enumeration .1.3.6.1.4.1.33.26.7.1.1.4 |
xIsisL1CLNPRouteMetricValueThe path metric value for this destination.ro INTEGER .1.3.6.1.4.1.33.26.7.1.1.5 |
xIsisL1CLNPRouteForwThe OBJECT IDENTIFIER for the first object in the table
entry which corresponds to the entry used for forwarding
packets to this destination. This value is an OBJECT
IDENTIFIER for an instance of the object:
xIsisESAdjSysInstance or xIsisISAdjSysInstance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.7.1.1.6 |
xIsisL1CLNPRouteSourceThe source of the destination. Manual is used if the
source is manually configured information on the system.
Level1 is used if the source is Level 1 LSPs. Esis is
used if the source is ES Hellosro Enumeration .1.3.6.1.4.1.33.26.7.1.1.7 |
xIsisL2CLNPDestTableThe Level 2 CLNP Destination Table records information
about each NSAP Address Prefix known to the Intermediate
System. SEQUENCE OF XIsisL2CLNPDestEntry .1.3.6.1.4.1.33.26.7.2 |
xIsisL2CLNPDestEntryEach entry records information about one NSAP Address
Prefix known to the Intermediate System. XIsisL2CLNPDestEntry .1.3.6.1.4.1.33.26.7.2.1 |
xIsisL2CLNPSysInstanceThe identifier of the Integrated IS-IS Level 2 instance
from which this reachability information was learned.ro INTEGER .1.3.6.1.4.1.33.26.7.2.1.1 |
xIsisL2CLNPRouteDestThe destination address prefix.ro OCTET STRING .1.3.6.1.4.1.33.26.7.2.1.2 |
xIsisL2CLNPRouteMetricQOSThe QOS metric for this destination.ro Enumeration .1.3.6.1.4.1.33.26.7.2.1.3 |
xIsisL2CLNPRouteMetricTypeIndicates whether the metric has an external component
or notro Enumeration .1.3.6.1.4.1.33.26.7.2.1.4 |
xIsisL2CLNPRouteMetricValueThe path metric value for this destination.ro INTEGER .1.3.6.1.4.1.33.26.7.2.1.5 |
xIsisL2CLNPRouteForwThe OBJECT IDENTIFIER for the first object in the table
entry which corresponds to the entry used for forwarding
packets to this destination. This value is an OBJECT
IDENTIFIER for an instance of one of the following
objects: isisVirtSysInstance, xIsisISAdjSysInstance,
xIsisRASysInstance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.7.2.1.6 |
xIsisL2CLNPRouteSourceThe source of the destination. Manual is used if the
source is manually configured information on the system.
Level2 is used if the source is Level 2 LSPs.ro Enumeration .1.3.6.1.4.1.33.26.7.2.1.7 |
xIsisL3CLNPDestTableThe Level 3 CLNP Destination Table records information
about each Reachable Address Prefix known to the Intermediate
System. SEQUENCE OF XIsisL3CLNPDestEntry .1.3.6.1.4.1.33.26.7.3 |
xIsisL3CLNPDestEntryEach entry records information about one Address
Prefix known to the Intermediate System. XIsisL3CLNPDestEntry .1.3.6.1.4.1.33.26.7.3.1 |
xIsisL3CLNPSysInstanceThe identifier of the Integrated IS-IS Level 3 instance
from which this reachability information was learned.ro INTEGER .1.3.6.1.4.1.33.26.7.3.1.1 |
xIsisL3CLNPRouteDestThe destination address prefix.ro OCTET STRING .1.3.6.1.4.1.33.26.7.3.1.2 |
xIsisL3CLNPRouteMetricQOSThe QOS metric for this destination.ro Enumeration .1.3.6.1.4.1.33.26.7.3.1.3 |
xIsisL3CLNPRouteMetricTypeIndicates whether the metric has an external component
or notro Enumeration .1.3.6.1.4.1.33.26.7.3.1.4 |
xIsisL3CLNPRouteMetricValueThe path metric value for this destination.ro INTEGER .1.3.6.1.4.1.33.26.7.3.1.5 |
xIsisL3CLNPRouteForwThe OBJECT IDENTIFIER for the first object in the table
entry which corresponds to the entry used for forwarding
packets to this destination. This value is an OBJECT
IDENTIFIER for an instance of one of the following
objects: isisVirtSysInstance, xIsisISAdjSysInstance,
xIsisRASysInstance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.33.26.7.3.1.6 |
xIsisL3CLNPRouteSourceThe source of the destination. Manual is used if the
source is manually configured information on the system.
Level3 is used if the source is Level 3 LSPs.ro Enumeration .1.3.6.1.4.1.33.26.7.3.1.7 |