ITOUCH-CONCENTRATOR-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ITOUCH-CONCENTRATOR-MIB.
70
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
xConcentrator OBJECT IDENTIFIER .1.3.6.1.4.1.33.25 |
RFC1213-MIB Unknown .1.3.6.1.4.1.33.25 |
concentratorModeThis variable controls the ring mode of the
chassis.rw Enumeration .1.3.6.1.4.1.33.25.1 |
concentratorManagementThis variable controls the ability to manage token
ring concentrators.rw Enumeration .1.3.6.1.4.1.33.25.2 |
concentratorBuildTopologyThis variable causes the chassis token ring
topology database to be constructed.rw Enumeration .1.3.6.1.4.1.33.25.3 |
concentratorTopologyLastBuildThis variable contains the value of sysUpTime at
the time the chassis token ring topology database
was last constructed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.25.4 |
concentratorChassisRingDefaultsThis variable causes the chassis ring area of NVS
to be set to defaults.rw Enumeration .1.3.6.1.4.1.33.25.5 |
concentratorSlotTableTable of descriptive and status information about a
Token Ring Concentrator. SEQUENCE OF ConcentratorSlotEntry .1.3.6.1.4.1.33.25.6 |
concentratorSlotEntryAn entry in the table containing information about
a specific concentrator. ConcentratorSlotEntry .1.3.6.1.4.1.33.25.6.1 |
concentratorSlotIndexThis variable identifies the slot of the chassis.ro INTEGER .1.3.6.1.4.1.33.25.6.1.1 |
concentratorSlotIOTypeThis variable represents the type of the I/O card.ro IOType .1.3.6.1.4.1.33.25.6.1.2 |
concentratorSlotIOFirmwareVersionThis variable represents the revision level of the
firmware on the I/O card.ro INTEGER .1.3.6.1.4.1.33.25.6.1.3 |
concentratorSlotIOOperStatusThis variable represents the current operating
status of the I/O card.ro Enumeration .1.3.6.1.4.1.33.25.6.1.4 |
concentratorSlotUptimeThis variable contains the value of sysUpTime at
the time the concentrator was last reset.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.25.6.1.5 |
concentratorSlotNumPortsThis variable represents the number of Token Ring
ports supported by the concentrator.ro INTEGER .1.3.6.1.4.1.33.25.6.1.6 |
concentratorSlotRingTableTable of descriptive and status information about
the rings of a controller. SEQUENCE OF ConcentratorSlotRingEntry .1.3.6.1.4.1.33.25.7 |
concentratorSlotRingEntryAn entry in the table containing information about
a specific ring. ConcentratorSlotRingEntry .1.3.6.1.4.1.33.25.7.1 |
concentratorSlotSlotIndexThis variable identifies the slot of the chassis.ro INTEGER .1.3.6.1.4.1.33.25.7.1.1 |
concentratorSlotRingIndexThis variable identifies the ring within the slot.ro INTEGER .1.3.6.1.4.1.33.25.7.1.2 |
concentratorSlotRingAdminNameThis variable represents the user defined name of
the ring.rw DisplayString .1.3.6.1.4.1.33.25.7.1.3 |
concentratorSlotRingAdminSpeedThis variable represents the user defined speed of
the ring.rw Enumeration .1.3.6.1.4.1.33.25.7.1.4 |
concentratorSlotRingAdminStateThis variable defines whether the slot ring is to
be inserted into the defined chassis ring or is to
be isolated.rw Enumeration .1.3.6.1.4.1.33.25.7.1.5 |
concentratorSlotRingZeroThis variable is used to control the slot ring's
counters. The agent always returns 'ready' for this
value. Setting the value to 'ready' has no effect.rw Enumeration .1.3.6.1.4.1.33.25.7.1.6 |
concentratorSlotRingSinceZeroThis variable reflects the number of time ticks
since the counters were last zeroed. This variable
is set to zero when concentratoSlotRingZero is
written with the value 2ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.25.7.1.7 |
concentratorSlotRingChassisRingThis variable represents the chassis ring into
which the slot ring is to be inserted if it is to be
inserted.rw Letter .1.3.6.1.4.1.33.25.7.1.8 |
concentratorSlotRingOperNameThis variable represents the name currently being
used to identify the slot ring. If inserted, this
name will be the user defined name of the chassis
ring into which it is inserted. If isolated, this
name will be the user defined name of the slot
ring.ro DisplayString .1.3.6.1.4.1.33.25.7.1.9 |
concentratorSlotRingOperSpeedThis variable represents the current speed of the
slot ring. If inserted, this speed will be the user
defined speed of the chassis ring into which it is
inserted. If isolated, this speed will be the user
defined speed of the slot ring.ro Enumeration .1.3.6.1.4.1.33.25.7.1.10 |
concentratorSlotRingOperStateThis variable indicates whether the slot ring is
inserted into the defined chassis ring or is
isolated.ro Enumeration .1.3.6.1.4.1.33.25.7.1.11 |
concentratorSlotRingChassisRingsAllowedThe list of chassis rings into which this slot ring
may be inserted. The OCTET STRING contains a bit
map, with a bit for 'none' (indicating it may be
isolated) and one bit for each chassis ring, and
enough octets for all chassis rings. The high order
bit of the first octet corresponds to 'none' and
each subsequent bit in ascending order corresponds
to the chassis rings in order beginning with A.ro OCTET STRING .1.3.6.1.4.1.33.25.7.1.12 |
concentratorChassisRingTableTable of descriptive and status information about
the rings of a the chassis. SEQUENCE OF ConcentratorChassisRingEntry .1.3.6.1.4.1.33.25.8 |
concentratorChassisRingEntryAn entry in the table containing information about
a specific ring. ConcentratorChassisRingEntry .1.3.6.1.4.1.33.25.8.1 |
concentratorChassisRingIndexThis variable identifies the ring of the chassis.ro Letter .1.3.6.1.4.1.33.25.8.1.1 |
concentratorChassisRingNameThis variable represents the name of the ring. All
segments of a given chassis ring will have the same
base name, All segment of that ring will appear as
'baseNamex' where x is the identified segmentrw DisplayString .1.3.6.1.4.1.33.25.8.1.2 |
concentratorChassisRingSpeedThis variable indicates the speed of the ring
segment. All segments of a given chassis ring are
at the same speed.rw Enumeration .1.3.6.1.4.1.33.25.8.1.3 |
concentratorChassisRingTopologyChangesThis variable reflects the number of times the
topology has changed for this ring. This variable
is set to zero when concentratorChassisRingZero is
written with the value 2.ro Counter .1.3.6.1.4.1.33.25.8.1.4 |
concentratorChassisRingZeroThis variable is used to control the ring's
counters. The agent always returns 'ready' for this
value. Setting the value to 'ready' has no effect.rw Enumeration .1.3.6.1.4.1.33.25.8.1.5 |
concentratorChassisRingSinceZeroThis variable reflects the number of time ticks
since the counters were last zeroed. This variable
is set to zero when concentratoChassisRingZero is
written with the value 2ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.25.8.1.6 |
concentratorChassisRingTopologyTableTable of descriptive and status information about
the segments of the chassis rings. SEQUENCE OF ConcentratorChassisRingTopologyEntry .1.3.6.1.4.1.33.25.9 |
concentratorChassisRingTopologyEntryAn entry in the table containing information about
a specific ring segment. ConcentratorChassisRingTopologyEntry .1.3.6.1.4.1.33.25.9.1 |
concentratorChassisRingTopologySlotIndexThis variable identifies a slot number that is
included in the ring segment.ro INTEGER .1.3.6.1.4.1.33.25.9.1.1 |
concentratorChassisRingTopologyRingIndexThis variable identifies the ring of the chassis.ro Letter .1.3.6.1.4.1.33.25.9.1.2 |
concentratorChassisRingTopologyWrapUpThis variable represents the upper wrap state for
the chassis ring which passes through this slot. By
setting this variable to Wrap, the user can create a
segment which would contain this slot, and all slots
above this one which are on the same segment.ro Enumeration .1.3.6.1.4.1.33.25.9.1.3 |
concentratorChassisRingTopologyWrapDownThis variable represents the lower wrap state for
the chassis ring which passes through this slot. By
setting this variable to Wrap, the user can create a
segment which would contain this slot, and all slots
below this one which are on the same segment.ro Enumeration .1.3.6.1.4.1.33.25.9.1.4 |
concentratorChassisRingTopologyUpStateThis variable represents the type of upper wrap for
the chassis ring which passes through this slot.ro Enumeration .1.3.6.1.4.1.33.25.9.1.5 |
concentratorChassisRingTopologyDownStateThis variable represents the type of lower wrap for
the chassis ring which passes through this slot.ro Enumeration .1.3.6.1.4.1.33.25.9.1.6 |
concentratorChassisRingTopologySegmentThis variable represents the segment number for the
chassis ring which passes through this slot.ro INTEGER .1.3.6.1.4.1.33.25.9.1.7 |
concentratorChassisRingTopologyNameThis variable represents the name of the ring
segment. The ring segment name is the base ring
name with '-segment number' appended to the end.ro DisplayString .1.3.6.1.4.1.33.25.9.1.8 |
concentratorChassisRingTopologySpeedThis variable indicates the speed of the ring
segment. All segments of a given chassis ring are
at the same speed as the parent ring.ro Enumeration .1.3.6.1.4.1.33.25.9.1.9 |
concentratorChassisRingTopologyCardTypeThis variable represents the type of the I/O card.ro IOType .1.3.6.1.4.1.33.25.9.1.10 |
concentratorChassisRingTopologyAutoUpChangesThis variable reflects the number of times the
topology has changed for this ring due to a dynamic
wrap up. This variable is set to zero when
concentratorSlotRingZero is written with the value
2.ro Counter .1.3.6.1.4.1.33.25.9.1.11 |
concentratorChassisRingTopologyAutoDownChangesThis variable reflects the number of times the
topology has changed for this ring due to a dynamic
wrap down. This variable is set to zero when
concentratorSlotRingZero is written with the value
2.ro Counter .1.3.6.1.4.1.33.25.9.1.12 |
concentratorPortTableTable of information and status concerning the
ports of a concentrator. SEQUENCE OF ConcentratorPortEntry .1.3.6.1.4.1.33.25.10 |
concentratorPortEntryAn entry in the table containing control and status
information for a port. ConcentratorPortEntry .1.3.6.1.4.1.33.25.10.1 |
concentratorPortSlotIndexThis variable identifies the slot of the chassis.ro INTEGER .1.3.6.1.4.1.33.25.10.1.1 |
concentratorPortIndexThis variable identifies target port.ro INTEGER .1.3.6.1.4.1.33.25.10.1.2 |
concentratorPortNameThis variable represents the user defined name of
the port.rw DisplayString .1.3.6.1.4.1.33.25.10.1.3 |
concentratorPortTypeThis variable represents the type of connector
provided for the port.ro Enumeration .1.3.6.1.4.1.33.25.10.1.4 |
concentratorPortZeroThis variable is used to control the ports
counters. The agent always returns 'ready' for this
value. Setting the value to 'ready' has no effect.rw Enumeration .1.3.6.1.4.1.33.25.10.1.5 |
concentratorPortSinceZeroThis variable reflects the number of time ticks
since the counters were las zeroed. This variable
is set to zero when concentratorPortZero is written
with the value 2ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.25.10.1.6 |
concentratorPortAdminStateThis variable reflects the enable/disable state of
the port.rw Enumeration .1.3.6.1.4.1.33.25.10.1.7 |
concentratorPortOperStateThis variable reflects the enable/disable state of
the port.ro Enumeration .1.3.6.1.4.1.33.25.10.1.8 |
concentratorPortInsertionsThis variable reflects the number of times the port
was inserted into the ring.ro Counter .1.3.6.1.4.1.33.25.10.1.9 |
concentratorPortInsertFailuresThis variable reflects the number of times the port
was not inserted due to a data rate mismatch.ro Counter .1.3.6.1.4.1.33.25.10.1.10 |
concentratorPortAdminInsertThis variable reflects the desired insertion of the
port. Auto indicates to insert the port into the
first slot ring with a matching data rate beginning
with 1.rw Enumeration .1.3.6.1.4.1.33.25.10.1.11 |
concentratorPortOperInsertThis variable reflects the slot ring to which the
port is attached.ro Enumeration .1.3.6.1.4.1.33.25.10.1.12 |
concentratorPortSpeedThis variable reflects the measured speed of the
port.ro Enumeration .1.3.6.1.4.1.33.25.10.1.13 |
concentratorPortAdminLoopbackThis variable reflects the whether this port will
be inserted into a ring or the data loop backed.rw Enumeration .1.3.6.1.4.1.33.25.10.1.14 |
concentratorPortStationTypeThis variable reflects the concentrator port type.rw Enumeration .1.3.6.1.4.1.33.25.10.1.15 |
concentratorPortAdminTrunkInsertThis variable is used to control the insertion of
trunk ports. When set to 'execute' the trunk port
will be inserted into the ring immediately and not
wait for the trunk timer to expire. The agent always
returns 'ready' for this value. Setting the value
to 'ready' has no effect.rw Enumeration .1.3.6.1.4.1.33.25.10.1.16 |
concentratorPortSlotRingsAllowedThe list of slot rings into which this port may be
inserted. The OCTET STRING contains a bit map, with
a bit for 'none' (indicating it may be isolated) and
one bit for each slot ring, and enough octets for
all slot rings. The high order bit of the first
octet corresponds to 'none' and each subsequent bit
in ascending order corresponds to the slot rings in
order beginning with 1.ro OCTET STRING .1.3.6.1.4.1.33.25.10.1.17 |