ISO3201-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
146
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
146 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCT3201PortTableThis table contains the 3201 Port configuration parameters. SEQUENCE OF Cdx6500PPCT3201PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.28 |
cdx6500PPCT3201PortEntryEntries in the 3201 Port Configuration Table. Cdx6500PPCT3201PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.28.1 |
iso3201PCfgPortNumPort number of the 3201 port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.28.1.1 |
iso3201PCfgPortTypeThe Port Type of the port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.28.1.2 |
iso3201PCfgPortSpeedThis specifies port speed in bits per second
speed300 : 300 bits per second
speed600 : 600 bits per second
speed1200 : 1200 bits per second
speed1800 : 1800 bits per second
speed2400 : 2400 bits per second
speed4800 : 4800 bits per second
speed7200 : 7200 bits per second
speed9600 : 9600 bits per second
speed19200 : 19200 bits per second .ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.28.1.3 |
iso3201PCfgNoOfControllersThis specifies the number of controllers on this line.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.28.1.4 |
iso3201PCfgResponseTimeoutThis specifies the amount of time in 1/20th of a
second that the PAD waits for a response from a
controller. A value of 5 gives a response timeout
of 250ms.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.28.1.5 |
iso3201PCfgInterChrTimeoutThis specifies the maximum amount of time in 1/20
of a second that the PAD waits between two characters
when receiving data from the attatched devices before
detecting a line problem. A value of 2 gives an
intercharacter timeout of 100ms.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.28.1.6 |
iso3201PCfgNoOfRetriesThis specifies the retry limit for polls/selects
sent, NAKs sent/received and ENQs sent/received.
In case of polls and selects, the controller is
placed in slow poll mode on reaching this limit.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.28.1.7 |
iso3201PCfgNoOfConsecRetriesThis specifies the number of retries that will be
made immediately in case of response timeout on
Poll, response timeout on Select or NAK response
to select. The next controller in the list will be
polled/selected only after these many retries are
made for the non-responding controller.
All consecutive retries will be counted as one retry
attempt.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.28.1.8 |
iso3201PCfgSlowPollWaitCycleThis specifies the number of poll cycles to active
controllers before a poll is sent to one controller
in the slow poll list.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.28.1.9 |
iso3201PCfgElectricalInterfaceTypeSpecify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
NONE - Electrically disabledro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.28.1.10 |
iso3201PCfgV24ElectricalInterfaceOptionSpecify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signalro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.28.1.11 |
iso3201PCfgHighSpeedElectricalInterfaceOptionSpecify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cablero Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.28.1.12 |
cdx6500PCTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.3 |
cdx6500SPCT3201StnTableThis table contains the 3201 Station Configuration
parameters. SEQUENCE OF Cdx6500SPCT3201StnEntry .1.3.6.1.4.1.449.2.1.2.1.3.7 |
cdx6500SPCT3201StnEntryEntries in the 3201 Station Configuration Table. Cdx6500SPCT3201StnEntry .1.3.6.1.4.1.449.2.1.2.1.3.7.1 |
iso3201SCfgPortNumPort number of the 3201 port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.7.1.1 |
iso3201SCfgStnNumStation number of the 3201 station.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.7.1.2 |
iso3201SCfgControllerAddressThis specifies the address of this controller
The valid addresses are :
0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B,
0x2C, 0x2D, 0x2E, 0x2F, 0x40, 0x41,
0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D,
0x4E, 0x4F, 0x60, 0x61, 0x62, 0x63,
0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.3.7.1.3 |
iso3201SCfgAutocallMnemonicThis specifies the mnemonic used by the PAD to
place calls to the Host for this controller.
Host initiated calls will be accepted only if
this field is blank.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.7.1.4 |
iso3201SCfgAutocallTimeoutThis specifies the time interval in seconds
between call attempts.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.7.1.5 |
iso3201SCfgMaxNoAutocallAttemptsThis specifies the number of times autocall
attempts will be made. A value of 0 will allow
unlimited attempts.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.7.1.6 |
iso3201SCfgX25AddressThis specifies the X.25 address inserted in the
calling address field of the call packet sent by
the PAD to the Host. This address identifies the
controller to the Host.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.7.1.7 |
iso3201SCfgBillingRecordsThis controls whether billing(accounting) records
will be created for calls on this station
billingDisabled : billing is disabled
billingEnabled : billing is enabled .ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.3.7.1.8 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPST3201PStatsTableThis table contains 3201 Port Statistics parameters. SEQUENCE OF Cdx6500PPST3201PStatsEntry .1.3.6.1.4.1.449.2.1.3.1.1.29 |
cdx6500PPST3201PStatsEntryEntries in the 3201 Port Statistics Table. Cdx6500PPST3201PStatsEntry .1.3.6.1.4.1.449.2.1.3.1.1.29.1 |
iso3201PStatsPortNumPort Number of the 3201 Port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.29.1.1 |
iso3201PStatsPortStatusThis indicates the operational status of the port
up : port is enabled
disabled : port is disabled .ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.29.1.2 |
iso3201PStatsPortTypeThis indicates the type of access protocol for this port.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.29.1.3 |
iso3201PStatsPortSpeedThis specifies port speed in bits per second
speed300 : 300 bits per second
speed600 : 600 bits per second
speed1200 : 1200 bits per second
speed1800 : 1800 bits per second
speed2400 : 2400 bits per second
speed4800 : 4800 bits per second
speed7200 : 7200 bits per second
speed9600 : 9600 bits per second
speed19200 : 19200 bits per second .ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.29.1.4 |
iso3201PStatsPortUtilInThis indicates the port utilization for the line to port
direction.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.29.1.5 |
iso3201PStatsPortUtilOutThis indicates the port utilization for the port to line
direction.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.29.1.6 |
iso3201PStatsLineStatusThis indicates the line status :
up : if one or more controllers are responding
to polls
down : if no controllers are responding or garbage
is being received.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.29.1.7 |
iso3201PStatsTxChrsThis specifies the number of characters transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.8 |
iso3201PStatsTxMsgsThis specifies the number of data messages transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.9 |
iso3201PStatsTxPollsThis specifies the number of polls transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.10 |
iso3201PStatsTxSelectsThis specifies the number of selects transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.11 |
iso3201PStatsTxACKsThis specifies the number of data messages for which
ACKs were transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.12 |
iso3201PStatsTxNAKsThis specifies the number of messages for which
NAKs were transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.13 |
iso3201PStatsTxENQsThis specifies the number of ENQs transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.14 |
iso3201PStatsRxChrsThis specifies the number of characters received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.15 |
iso3201PStatsRxMsgsThis specifies the number of data messages received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.16 |
iso3201PStatsRxACKsThis specifies the number of data messages for which
ACKs were received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.17 |
iso3201PStatsRxNAKsThis specifies the number of messages for which
NAKs were received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.18 |
iso3201PStatsRxENQsThis specifies the number of ENQs received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.29.1.19 |
cdx6500PSTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.3 |
cdx6500SPST3201StnTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.3.6 |
cdx6500SPST3201SStatsTableThis table contains 3201 Station statistics parameters. SEQUENCE OF Cdx6500SPST3201StnEntry .1.3.6.1.4.1.449.2.1.3.1.3.6.1 |
cdx6500SPST3201StnEntryEntries in the 3201 Station statistics table. Cdx6500SPST3201StnEntry .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1 |
iso3201SStatsPortNumPort number of the 3201 port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.1 |
iso3201SStatsStnNumStation number of the 3201 station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.2 |
iso3201SStatsControllerAddressThis specifies the address of this controller
The valid addresses are :
0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B,
0x2C, 0x2D, 0x2E, 0x2F, 0x40, 0x41,
0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D,
0x4E, 0x4F, 0x60, 0x61, 0x62, 0x63,
0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.3 |
iso3201SStatsStnStateThis indicates the current state of the station
up : when responding to polls
down : when tries have expired and controller
is in slow poll
suspended : when polling has been stopped by host
blocked : when polling has been stopped because
the X.25 channel is blocked
disabled : when station is disabled.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.4 |
iso3201SStatsCurrentStatusThis gives information regarding the calls placed by this
station on its host.
calling : when it is waiting call accept from the host
connected : when the connection to the host has been
accepted
idle : when connection attempts are not in progress
(no data to send to the Host), or autocall
attempts have been exhausted or when it is
waiting for autocall timeout (to send call
request again).ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.5 |
iso3201SStatsNoOfAutocallAttmptsThis indicates the number of attempts made to establish
connection to the host.
This is reset to 0 when a connection is established.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.6 |
iso3201SStatsNxtAutocallAttmptThis indicates the time (in seconds ) after which the
station will place autocall to the host.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.7 |
iso3201SStatsLastClearCauseCodeLast autocall clear cause code.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.8 |
iso3201SStatsLastClearDiagCodeLast clear diagnostic code.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.9 |
iso3201SStatsLastInCalledAddressThis indicates the called address in the last
inbound call request packet sent by this station.
A value of 'Last Call Information not available'
will be returned if the last incoming call packet
is not present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.10 |
iso3201SStatsLastInCallingAddressThis indicates the calling address in the last
inbound request packet sent by this station.
A value of 'Last Call Information not available'
will be returned if the last incoming call packet
is not present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.11 |
iso3201SStatsLastInCallFacilitiesThis indicates the facilities in the last
inbound request packet sent by this station.
A value of 'Last Call Information not available'
will be returned if the last incoming call packet
is not present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.12 |
iso3201SStatsLastInCallCUDThis indicates the data in the Call User Data field
in the last inbound call request packet sent by this
station. A value of 'Last Call Information not available'
will be returned if the incoming call packet is not
present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.13 |
iso3201SStatsLastOutCalledAddressThis indicates the called address in the last
outbound call request packet sent by this station.
A value of 'Last Call Information not available'
will be returned if the last outgoing call packet
is not present.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.14 |
iso3201SStatsLastOutCallingAddressThis indicates the calling address in the last
outbound call request packet sent by this station.
A value of 'Last Call Information not available'
will be returned if the last outgoing call packet
is not present.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.15 |
iso3201SStatsLastOutCallFacilitiesThis indicates the facilities in the last
outbound call request packet sent by this station.
A value of 'Last Call Information not available'
will be returned if the last outgoing call packet
is not present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.16 |
iso3201SStatsLastOutCallCUDThis indicates the data in the Call User Data field
in the last outbound call request packet sent by
this station. A value of 'Last Call Information not
available' will be returned if the last call outgoing
packet is not present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.17 |
cdx6500SPST3201PktSummTableThis table contains the Packet Summary
statistics parameters. SEQUENCE OF Cdx6500SPST3201PktSummEntry .1.3.6.1.4.1.449.2.1.3.1.3.6.2 |
cdx6500SPST3201PktSummEntryEntries in the Packet Summary statistics table. Cdx6500SPST3201PktSummEntry .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1 |
iso3201SStatsPktSummPortNumThis specifies the physical port number .ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.1 |
iso3201SStatsPktSummStnNumThis specifies the entry number of this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.2 |
iso3201SStatsTxDataThis specifies the count of data packets transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.3 |
iso3201SStatsTxCallRequestThis specifies the count of call request packets transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.4 |
iso3201SStatsTxCallAcceptThis specifies the count of call accept packets transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.5 |
iso3201SStatsTxClearRequestThis specifies the count of clear request packets
transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.6 |
iso3201SStatsTxClearConfirmThis specifies the count of clear confirm packets
transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.7 |
iso3201SStatsTxResetRequestThis specifies the count of reset request packets
transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.8 |
iso3201SStatsTxResetConfirmThis specifies the count of reset confirm packets
transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.9 |
iso3201SStatsTxWindowClosedThe 'Transmit Window Closed' counts the number of
times the 3201 station could not send data to the
adjacent channel because of flow control.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.10 |
iso3201SStatsRxDataThis specifies the count of data packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.11 |
iso3201SStatsRxCallRequestThis specifies the count of call request packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.12 |
iso3201SStatsRxCallAcceptThis specifies the count of call accept packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.13 |
iso3201SStatsRxClearRequestThis specifies the count of clear request packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.14 |
iso3201SStatsRxClearConfirmThis specifies the count of clear confirm packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.15 |
iso3201SStatsRxResetRequestThis specifies the count of reset request packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.16 |
iso3201SStatsRxResetConfirmThis specifies the count of reset confirm packets received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.17 |
iso3201SStatsRxWindowClosedThe 'Receive Window Closed' is incremented every
time the 3201 station removes data out of its queue
towards the terminal and the number of messages queued
is greater than 15.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.18 |
cdx6500SPST3201SummTableThis table contains the 3201 summary statistics parameters. SEQUENCE OF Cdx6500SPST3201SummEntry .1.3.6.1.4.1.449.2.1.3.1.3.6.3 |
cdx6500SPST3201SummEntryEntries in the 3201 Summary statistics table. Cdx6500SPST3201SummEntry .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1 |
iso3201SStatsSummPortNumThis specifies the physical port number.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.1 |
iso3201SStatsSummStnNumThis specifies the entry number of this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.2 |
iso3201SStatsTxPollsThis indicates the number of polls transmitted to
this controller.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.3 |
iso3201SStatsTxSelectsThis indicates the number of selects transmitted to
this controller.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.4 |
iso3201SStatsTxDataBytesThis indicates the number of data bytes transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.5 |
iso3201SStatsTxDataMsgsThis specifies the number of data messages transmitted.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.6 |
iso3201SStatsTxDataMsgsPerHourThis specifies the number of data messages transmitted
per hour.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.7 |
iso3201SStatsTxAvgMsgLengthThis indicates the average length of data messages
transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.8 |
iso3201SStatsTxMsgsNAKedThis specifies the number of data messages for which
NAKs were transmitted.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.9 |
iso3201SStatsTxSelectRetryExhaustedThis indicates the number of selects to this
controller for which all attempts failed.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.10 |
iso3201SStatsTxNAKRetryExhaustedThis indicates the number of times the NAK sent
retry limit was crossed.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.11 |
iso3201SStatsTxENQsThis specifies the number of ENQs transmitted.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.12 |
iso3201SStatsTxENQRetryExhaustedThis specifies the number of times the ENQ sent
retry limit was crossed.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.13 |
iso3201SStatsTxPollingSuspendedByHostThis specifies the number of times polling was suspended
on account of receiving an interrupt packet from the host.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.14 |
iso3201SStatsRxDataBytesThis indicates the number of data bytes received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.15 |
iso3201SStatsRxDataMsgsThis specifies the number of data messages received.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.16 |
iso3201SStatsRxDataMsgsPerHourThis specifies the number of data messages received
per hour.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.17 |
iso3201SStatsRxAvgMsgLengthThis indicates the average length of data messages
received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.18 |
iso3201SStatsRxMsgsNAKedThis specifies the number of data messages for which
NAKs were received.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.19 |
iso3201SStatsRxMsgsAbortedThis specifies the number of data messages to the
controller for which were aborted by the controller
(by sending EOT).ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.20 |
iso3201SStatsRxSelectsNAKedThis specifies the number of selects for which NAKs
were received by the controller.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.21 |
iso3201SStatsRxInvRespToSelectThis indicates the number of selects for which an
invalid response was received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.22 |
iso3201SStatsRxNAKRetryExhaustedThis indicates the number of times the NAK received
retry limit was crossed.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.23 |
iso3201SStatsRxENQsThis indicates the number of ENQs received.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.24 |
iso3201SStatsRxENQRetryExhaustedThis indicates the number of times the ENQ received
retry limit was crossed.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.25 |
iso3201SStatsRxInterChrTimeoutThis indicates the number of times intercharacter timeout
occurred while receiving data from the controller .ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.26 |
iso3201SStatsRxPollTimeoutThis specifies the number of times the controller did not
respond to poll before response timeout .ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.27 |
iso3201SStatsRxSelectTimeoutThis indicates the number of times the controller did not
respond to select before response timeout.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.28 |
iso3201SStatsRxReceiveTimeoutThis indicates the number of times the controller did not
respond to a ACK before response timeout and the number
of times the inter-character timer expired when receiving
response to a NAK.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.29 |
iso3201SStatsRxParityErrorsOnCntrlThis specifies the number of times the PAD detected
a parity error on the control characters ACK, DLE,
NAK, ENQ, EOT, ETX, SOH, STX.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.30 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500Cont3201Table OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.11 |
cdx6500Cont3201PortTableThis table contains the 3201 Port Control parameters. SEQUENCE OF Cdx6500Cont3201PortEntry .1.3.6.1.4.1.449.2.1.4.11.1 |
cdx6500Cont3201PortEntryEntries in the 3201 Port control Table. Cdx6500Cont3201PortEntry .1.3.6.1.4.1.449.2.1.4.11.1.1 |
iso3201PContPortNum3201 port number . INTEGER .1.3.6.1.4.1.449.2.1.4.11.1.1.1 |
iso3201ContPortBootBoots the specified 3201 port.
boot : Boot the port
noBoot : Do not boot the port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.11.1.1.2 |
iso3201ContPortEnableEnables the specified 3201 Port.
enable : Enable the Port
noEnable : Do not enable the port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.11.1.1.3 |
iso3201ContPortDisableDisables the specified 3201 Port.
disable : Disable Port
noDisable : Do not disable Port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.11.1.1.4 |
iso3201ContPortResetStatsReset statistics for the specified 3201 Port
reset : Reset port statistics
noReset : Do not reset port statistics.rw Enumeration .1.3.6.1.4.1.449.2.1.4.11.1.1.5 |
cdx6500Cont3201StnTableThis table contains the 3201 Station Control parameters. SEQUENCE OF Cdx6500Cont3201StnEntry .1.3.6.1.4.1.449.2.1.4.11.2 |
cdx6500Cont3201StnEntryEntries in the 3201 Station Control Table. Cdx6500Cont3201StnEntry .1.3.6.1.4.1.449.2.1.4.11.2.1 |
iso3201SContPortNum3201 port number. INTEGER .1.3.6.1.4.1.449.2.1.4.11.2.1.1 |
iso3201ContStnNum3201 station number. INTEGER .1.3.6.1.4.1.449.2.1.4.11.2.1.2 |
iso3201ContStnBootBoots the secified 3201 station.
boot : Boot the station
noBoot : Do not boot Station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.11.2.1.3 |
iso3201ContStnEnableEnables the specified 3201 station
enable : Enable station
noEnable : Do not enable station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.11.2.1.4 |
iso3201ContStnDisableDisables the specified 3201 Station
disable : Disable Station
noDisable : Do not disable Station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.11.2.1.5 |
iso3201ContStnResetStatsReset statistics for the specified 3201 station
reset : Reset station statistics
noReset : Do not reset station statistics.rw Enumeration .1.3.6.1.4.1.449.2.1.4.11.2.1.6 |