ISIS-D13-MIB
This document describes a management information base for the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195. This document defines an experimental portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. This document is based on a 1994 IETF draft by Chris Gunner. This version has been modified to include MIB-II syntax, to exclude portions of the protocol that are not relevant to IP, and to add management support for current practice.
Main OID:
isisD13MIB.1.3.6.1.3.37
258
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
258 total| Object Name |
|---|
isisD13MIBThis document describes a management information base for the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195. This document defines an experimental portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. This document is based on a 1994 IETF draft by Chris Gunner. This version has been modified to include MIB-II syntax, to exclude portions of the protocol that are not relevant to IP, and to add management support for current practice. MODULE-IDENTITY .1.3.6.1.3.37 |
isisD13Objects OBJECT IDENTIFIER .1.3.6.1.3.37.1 |
isisD13SystemThe object describes system wide attributes. OBJECT IDENTIFIER .1.3.6.1.3.37.1.1 |
isisD13SysTableThe set of instance of the Integrated IS-IS protocol existing on the system. SEQUENCE OF IsisSysEntry .1.3.6.1.3.37.1.1.1 |
isisD13SysEntryEach row defines information specific to a single instance of the IS-IS protocol existing on the system. IsisSysEntry .1.3.6.1.3.37.1.1.1.1 |
isisD13SysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behavior. Integer32 .1.3.6.1.3.37.1.1.1.1.1 |
isisD13SysVersionThe version number of the IS-IS protocol which this instance implements.ro DisplayString (SNMPv2-TC) .1.3.6.1.3.37.1.1.1.1.2 |
isisD13SysTypeThe type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behavior.rw Enumeration .1.3.6.1.3.37.1.1.1.1.3 |
isisD13SysIDThe ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the area addresses to form the Network Entity Titles. The derivation of a value for this object is implementation-specific. Some implementations may automatically assign values and not permit an SNMP write, while others may require the value to be set manually.rw SystemID .1.3.6.1.3.37.1.1.1.1.4 |
isisD13SysMaxPathSplitsMaximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behavior.rw Integer32 .1.3.6.1.3.37.1.1.1.1.5 |
isisD13SysMaxLSPGenIntMaximum interval, in seconds, between generated LSPs by this instance of the protocol. This object follows the resettingTimer behavior. Should be at least 300 seconds less than isisD13SysMaxAge.rw Integer32 .1.3.6.1.3.37.1.1.1.1.6 |
isisD13SysPollESHelloRateThe value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.rw Unsigned16TC .1.3.6.1.3.37.1.1.1.1.7 |
isisD13SysWaitTimeNumber of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior.rw Unsigned16TC .1.3.6.1.3.37.1.1.1.1.8 |
isisD13SysAdminStateThe administrative state of this instance of the Integrated IS-IS protocol. Setting this object to the value 'on' when its current value is 'off' enables operation of this instance of the Integrated IS-IS protocol.rw AdminState .1.3.6.1.3.37.1.1.1.1.9 |
isisD13SysLogAdjacencyChangesIf true, causes IS-IS to generate a log message when an IS-IS adjacency changes state (up or down).rw TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.1.1.1.10 |
isisD13SysNextCircIndexThis object is used to assign values to isisD13CircIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads this object, and then writes the value back as the isisD13CircIndex in a SET that creates a new instance of isisD13CircEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the object is incremented, and the new isisD13Circuit is created according to the manager's directions.ro TestAndIncr (SNMPv2-TC) .1.3.6.1.3.37.1.1.1.1.11 |
isisD13SysL2toL1LeakingIf true, allow the router to leak L2 routes into L1.rw TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.1.1.1.12 |
isisD13SysMaxAgeValue to place in RemainingLifeTime field of the LSPs we generate. This is should be at least 300 seconds greater than isisD13SysMaxLSPGenInt.rw Unsigned16TC .1.3.6.1.3.37.1.1.1.1.13 |
isisD13SysReceiveLSPBufferSizeSize of the largest Buffer we are designed or configured to store. This should be at least as big as the maximum isisD13SysOrigLSPBuffSize supported by the system. If resources allow, we will store and flood LSPs larger than isisD13SysReceiveLSPBufferSize, as this can help avoid problems in networks with different values for isisD13SysOrigLSPBuffSize.rw Unsigned16TC .1.3.6.1.3.37.1.1.1.1.14 |
isisD13SysExistStateThe state of the IS-IS router. Turning this to state 'destroy' forces the router to forget all the current configuration. Setting the state to 'notInService' stops protocol processing, but retains the configuration.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.37.1.1.1.1.15 |
isisD13ManAreaAddrTableThe set of manual area addresses configured on this Intermediate System. SEQUENCE OF IsisManAreaAddrEntry .1.3.6.1.3.37.1.1.2 |
isisD13ManAreaAddrEntryEach entry contains one area address manually configured on this system IsisManAreaAddrEntry .1.3.6.1.3.37.1.1.2.1 |
isisD13ManAreaAddrA manually configured area address for this system. This object follows the index behavior. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID. OSINSAddress .1.3.6.1.3.37.1.1.2.1.1 |
isisD13ManAreaAddrExistStateThe state of the isisD13ManAreaAddrEntry. This object follows the Row Status behavior. If the isisD13SysAdminState for this instance of the IS-IS protocol is 'on', and an attempt is made to set this object to the value 'destroy' or 'notInService' when this is the only isisD13ManAreaAddrEntry in state 'active' for this instance of the IS-IS protocol should return inconsistentValue.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.37.1.1.2.1.2 |
isisD13AreaAddrTableThe union of the sets of area addresses reported in all Level 1 LSPs with segment number zero received by this instance of the protocol from Intermediate Systems which are reachable via Level 1 routing. SEQUENCE OF IsisAreaAddrEntry .1.3.6.1.3.37.1.1.3 |
isisD13AreaAddrEntryEach entry contains one area address reported in a Level 1 LSP received by this instance of the IS-IS protocol. IsisAreaAddrEntry .1.3.6.1.3.37.1.1.3.1 |
isisD13AreaAddrAn area address reported in a Level 1 LSP received by this instance of the IS-IS protocol.ro OSINSAddress .1.3.6.1.3.37.1.1.3.1.1 |
isisD13SysProtSuppTableThis table contains the manually configured set of protocols supported by each instance of the Integrated IS-IS protocol. SEQUENCE OF IsisSysProtSuppEntry .1.3.6.1.3.37.1.1.4 |
isisD13SysProtSuppEntryEach entry contains one protocol supported by an instance of the Integrated IS-IS protocol. IsisSysProtSuppEntry .1.3.6.1.3.37.1.1.4.1 |
isisD13SysProtSuppProtocolOne supported protocol. This object follows the index behavior. SupportedProtocol .1.3.6.1.3.37.1.1.4.1.1 |
isisD13SysProtSuppExistStateThe state of the isisD13SysProtSuppEntry. This object follows the RowStatus behavior.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.37.1.1.4.1.2 |
isisD13SummAddrTableThe set of IP summary addresses to use in forming summary TLVs originated by this Intermediate System. An administrator may use a summary address to combine and modify IP Reachability announcements. If the Intermediate system can reach any subset of the summary address, the summary address will be announced instead, at the configured metric. SEQUENCE OF IsisSummAddrEntry .1.3.6.1.3.37.1.1.5 |
isisD13SummAddrEntryEach entry contains one IP summary address. IsisSummAddrEntry .1.3.6.1.3.37.1.1.5.1 |
isisD13SummAddressTypeThe Type of IP address for this summary address. This object follows the index behavior. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.37.1.1.5.1.1 |
isisD13SummAddressThe IP Address value for this summary address. This object follows the index behavior. InetAddress .1.3.6.1.3.37.1.1.5.1.2 |
isisD13SummAddrPrefixLenThe Length of the IP NetMask for this summary address. InetAddressPrefixLength .1.3.6.1.3.37.1.1.5.1.3 |
isisD13SummAddrExistStateThe existence state of this summary address. This object follows the row status behavior.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.37.1.1.5.1.4 |
isisD13SummAddrMetricThe metric value to announce this summary address with in LSPs generated by this system.rw DefaultMetric .1.3.6.1.3.37.1.1.5.1.5 |
isisD13SummAddrFullMetricThe wide metric value to announce this summary address with in LSPs generated by this system.rw FullMetric .1.3.6.1.3.37.1.1.5.1.6 |
isisD13RedistributeAddrTableThis table provides criteria to decide if a route should be leaked from L2 to L1 when Domain Wide Prefix leaking is enabled. Addresses that match the summary mask in the table will be announced at L1 by routers when isisD13SysL2toL1Leaking is enabled. Routes that fall into the ranges specified are announced as is, without being summarized. Routes that do not match a summary mask are not announced. SEQUENCE OF IsisRedistributeAddrEntry .1.3.6.1.3.37.1.1.6 |
isisD13RedistributeAddrEntryEach entry contains one IP summary address to manage leaking L2 addresses into L1. IsisRedistributeAddrEntry .1.3.6.1.3.37.1.1.6.1 |
isisD13RedistributeAddrTypeThe Type of IP address for this summary address. This object follows the index behavior. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.37.1.1.6.1.1 |
isisD13RedistributeAddrAddressThe IP Address value for this summary address. This object follows the index behavior. InetAddress .1.3.6.1.3.37.1.1.6.1.2 |
isisD13RedistributeAddrPrefixLenThe Length of the IP NetMask for this summary address. InetAddressPrefixLength .1.3.6.1.3.37.1.1.6.1.3 |
isisD13RedistributeAddrExistStateThe existence state of this summary address. This object follows the row status behavior.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.37.1.1.6.1.4 |
isisD13RouterTableThe set of hostnames and router ID. SEQUENCE OF IsisRouterEntry .1.3.6.1.3.37.1.1.7 |
isisD13RouterEntryEach entry tracks information about one peer at one level. IsisRouterEntry .1.3.6.1.3.37.1.1.7.1 |
isisD13RouterSysIDThe System ID of the Router Peer. SystemID .1.3.6.1.3.37.1.1.7.1.1 |
isisD13RouterLevelThe level of this Intermediate System. ISLevel .1.3.6.1.3.37.1.1.7.1.2 |
isisD13RouterHostNameThe hostname listed in LSP, or NULL if none.ro DisplayString (SNMPv2-TC) .1.3.6.1.3.37.1.1.7.1.3 |
isisD13RouterIDThe Router ID of the Peer found in LSP, or NULL if none.ro Unsigned32 .1.3.6.1.3.37.1.1.7.1.4 |
isisD13SysLevelThis object describes attributes associated with the domain or with the area. OBJECT IDENTIFIER .1.3.6.1.3.37.1.2 |
isisD13SysLevelTableLevel specific information about the System. SEQUENCE OF IsisSysLevelEntry .1.3.6.1.3.37.1.2.1 |
isisD13SysLevelEntryDescribe variables defined for Area or Domain. IsisSysLevelEntry .1.3.6.1.3.37.1.2.1.1 |
isisD13SysLevelIndexThe level that this entry describes. Enumeration .1.3.6.1.3.37.1.2.1.1.1 |
isisD13SysLevelOrigLSPBuffSizeThe maximum size of LSPs and SNPs originated by this instance of the protocol at this level. This object follows the replaceOnlyWhileDisabled behavior.rw LSPBuffSize .1.3.6.1.3.37.1.2.1.1.2 |
isisD13SysLevelMinLSPGenIntMinimum interval, in seconds, between successive generation of LSPs with the same LSPID at this level by this instance of the protocol. This object follows the resettingTimer behavior.rw Unsigned16TC .1.3.6.1.3.37.1.2.1.1.3 |
isisD13SysLevelOverloadStateThe Overload state of the database at this level. The value 'overloaded' indicates a database that is low on an essential resource, such as memory. The administrator may indirectly force the state to 'waiting' when the router is initializing by setting the object isisD13SysLevelSetOverload. If the state is waiting or overloaded, we originate LSPs with the Overload bit set.ro LevelState .1.3.6.1.3.37.1.2.1.1.4 |
isisD13SysLevelSetOverloadAdministratively set the overload bit for the level. The overload bit will continue to be set if the implementation runs out of memory, independent of this variablerw TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.2.1.1.5 |
isisD13SysLevelSetOverloadUntilIf set, the overload bit should be set, and cleared after sysUpTime exceeds this value.rw TimeTicks UNITS "seconds" .1.3.6.1.3.37.1.2.1.1.6 |
isisD13SysLevelMetricStyleWhich style of Metric do we generate in our LSPs at this level? This object follows the replaceOnlyWhileDisabled behavior.rw MetricStyle .1.3.6.1.3.37.1.2.1.1.7 |
isisD13SysLevelSPFConsidersWhich style of Metric do we consider in our SPF computation at this level?rw MetricStyle .1.3.6.1.3.37.1.2.1.1.8 |
isisD13SysLevelTEEnabledDo we do Traffic Engineering at this level?rw TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.2.1.1.9 |
isisD13CircThis object describes attributes associated with one Circuit OBJECT IDENTIFIER .1.3.6.1.3.37.1.3 |
isisD13CircTableThe table of circuits used by each instance of Integrated IS-IS on this system. SEQUENCE OF IsisCircEntry .1.3.6.1.3.37.1.3.1 |
isisD13CircEntryAn isisD13CircEntry exists for each circuit used by Integrated IS-IS on this system. IsisCircEntry .1.3.6.1.3.37.1.3.1.1 |
isisD13CircIndexThe identifier of this circuit, unique within the instance of the IS-IS protocol. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value. Integer32 .1.3.6.1.3.37.1.3.1.1.1 |
isisD13CircIfIndexThe value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creationrw Integer32 .1.3.6.1.3.37.1.3.1.1.2 |
isisD13CircIfSubIndexA specifier for the part of the interface ifIndex to which this circuit corresponds, such as a DLCI or VPI/VCI. This object cannot be modified after creationrw Integer32 .1.3.6.1.3.37.1.3.1.1.3 |
isisD13CircAdminStateThe administrative state of the circuit. This object follows the AdminState behavior.rw AdminState .1.3.6.1.3.37.1.3.1.1.4 |
isisD13CircExistStateThe existence state of this circuit. This object follows the Row Status behavior. Setting the state to 'notInService' halts the generation and processing of IS-IS protocol PDUs on this circuit. Setting the state to destroy will also erase any configuration associated with the circuit.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.37.1.3.1.1.5 |
isisD13CircTypeThe type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisD13CircIfIndex.rw Enumeration .1.3.6.1.3.37.1.3.1.1.6 |
isisD13CircExtDomainIf true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit.rw TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.3.1.1.7 |
isisD13CircLevelIndicates which type of packets will be sent and accepted on this circuit. The values used will be modified by the settings of isisD13SysType. This object follows the replaceOnlyWhileDisabled behavior.rw Enumeration .1.3.6.1.3.37.1.3.1.1.8 |
isisD13CircPassiveCircuitShould we include this interface in LSPs, even if it is not running the IS-IS Protocol?rw TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.3.1.1.9 |
isisD13CircMeshGroupEnabledIs this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.rw Enumeration .1.3.6.1.3.37.1.3.1.1.10 |
isisD13CircMeshGroupCircuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If isisD13CircMeshGroupEnabled is inactive or blocked, this value is ignored.rw Unsigned32 .1.3.6.1.3.37.1.3.1.1.11 |
isisD13CircSmallHellosCan we send unpadded hellos on LAN circuits? False means LAN Hellos must be padded. Implementations should allow the administrator to read this value. An implementation need not be able to support unpadded hellos to be conformant.rw TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.3.1.1.12 |
isisD13CircLastUpTimeIf the circuit is enabled, the value of sysUpTime when isisD13CircAdminState most recently entered the state on. If the circuit is not on, the value of sysUpTime when the circuit last entered state on, 0 if the circuit has never been on.ro TimeTicks UNITS "seconds" .1.3.6.1.3.37.1.3.1.1.13 |
isisD13Circ3WayEnabledIs this circuit enabled to run 3Way handshake?rw TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.3.1.1.14 |
isisD13CircExtendedCircIDA unique value to be used as the extended circuit ID in 3Way handshake.rw Unsigned32 .1.3.6.1.3.37.1.3.1.1.15 |
isisD13CircLevelValuesThis object describes attributes associated with area or domain relevant within a Circuit. OBJECT IDENTIFIER .1.3.6.1.3.37.1.4 |
isisD13CircLevelTableLevel specific information about circuits used by IS-IS SEQUENCE OF IsisCircLevelEntry .1.3.6.1.3.37.1.4.1 |
isisD13CircLevelEntryAn isisD13CircLevelEntry exists for each level on each circuit used by Integrated IS-IS on this system. IsisCircLevelEntry .1.3.6.1.3.37.1.4.1.1 |
isisD13CircLevelIndexThe level that this entry describes. Enumeration .1.3.6.1.3.37.1.4.1.1.1 |
isisD13CircLevelMetricThe metric value of this circuit for this level.rw DefaultMetric .1.3.6.1.3.37.1.4.1.1.2 |
isisD13CircLevelWideMetricThe wide metric value of this circuit for this level.rw WideMetric .1.3.6.1.3.37.1.4.1.1.3 |
isisD13CircLevelISPriorityThe priority for becoming LAN Designated Intermediate System at this level.rw ISPriority .1.3.6.1.3.37.1.4.1.1.4 |
isisD13CircLevelIDOctetA one byte identifier that can be used in protocol packets to identify a circuit. Values of isisD13CircLevelIDOctet do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.rw Integer32 .1.3.6.1.3.37.1.4.1.1.5 |
isisD13CircLevelIDThe ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one byte isisD13CircLevelIDOctet for this circuit.ro CircuitID .1.3.6.1.3.37.1.4.1.1.6 |
isisD13CircLevelDesISThe ID of the LAN Designated Intermediate System on this circuit at this level. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.ro OCTET STRING .1.3.6.1.3.37.1.4.1.1.7 |
isisD13CircLevelHelloMultiplierThis value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this ISrw Integer32 .1.3.6.1.3.37.1.4.1.1.8 |
isisD13CircLevelHelloTimerMaximum period, in milliseconds, between IIH PDUs on multiaccess networks at this level for LANs. The value at level 1 is used as the period between Hellos on L1L2 point to point circuits. Setting this value at level 2 on an L1L2 point to point circuit will result in an error of InconsistentValue. This object follows the resettingTimer behavior.rw Integer32 .1.3.6.1.3.37.1.4.1.1.9 |
isisD13CircLevelDRHelloTimerPeriod, in milliseconds, between Hello PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behavior.rw Integer32 .1.3.6.1.3.37.1.4.1.1.10 |
isisD13CircLevelLSPThrottleMinimal interval of time, in milliseconds, between transmissions of LSPs on an interface at this level.rw Unsigned16TC .1.3.6.1.3.37.1.4.1.1.11 |
isisD13CircLevelMinLSPRetransIntMinimum interval, in seconds, between re-transmission of an LSP at this level. This object follows the resettingTimer behavior. Note that isisD13CircLevelLSPThrottle controls how fast we send back to back LSPs. This variable controls how fast we re-send the same LSP.rw Integer32 .1.3.6.1.3.37.1.4.1.1.12 |
isisD13CircLevelCSNPIntervalInterval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this level.rw Integer32 .1.3.6.1.3.37.1.4.1.1.13 |
isisD13CircLevelPartSNPIntervalMinimum interval in seconds between sending Partial Sequence Number PDUs at this level. This object follows the resettingTimer behavior.rw Integer32 .1.3.6.1.3.37.1.4.1.1.14 |
isisD13CountersThis object collects system and circuit counters OBJECT IDENTIFIER .1.3.6.1.3.37.1.5 |
isisD13SystemCounterTableSystem wide counters for one instance of the IS-IS protocol on the system. SEQUENCE OF IsisSystemCounterEntry .1.3.6.1.3.37.1.5.1 |
isisD13SystemCounterEntrySystem-wide IS-IS counters. IsisSystemCounterEntry .1.3.6.1.3.37.1.5.1.1 |
isisD13SysStatLevelThe level that this entry describes. Enumeration .1.3.6.1.3.37.1.5.1.1.1 |
isisD13SysStatCorrLSPsNumber of corrupted in-memory LSPs detected. LSPs received from the wire with a bad checksum are silently dropped and not counted.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.1.1.2 |
isisD13SysStatAuthTypeFailsThe number of authentication type mismatches recognized by this instance of the protocol.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.1.1.3 |
isisD13SysStatAuthFailsThe number of authentication failures recognized by this instance of the protocol.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.1.1.4 |
isisD13SysStatLSPDbaseOloadsNumber of times the LSP database has become overloaded.ro Counter32 .1.3.6.1.3.37.1.5.1.1.5 |
isisD13SysStatManAddrDropFromAreasNumber of times a manual address has been dropped from the area.ro Counter32 .1.3.6.1.3.37.1.5.1.1.6 |
isisD13SysStatAttmptToExMaxSeqNumsNumber of times the IS has attempted to exceed the maximum sequence number.ro Counter32 .1.3.6.1.3.37.1.5.1.1.7 |
isisD13SysStatSeqNumSkipsNumber of times a sequence number skip has occurred.ro Counter32 .1.3.6.1.3.37.1.5.1.1.8 |
isisD13SysStatOwnLSPPurgesNumber of times a zero-aged copy of the system's own LSP is received from some other node.ro Counter32 .1.3.6.1.3.37.1.5.1.1.9 |
isisD13SysStatIDFieldLenMismatchesNumber of times a PDU is received with a different value for ID field length to that of the receiving system.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.1.1.10 |
isisD13SysStatMaxAreaAddrMismatchesNumber of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.1.1.11 |
isisD13SysStatPartChangesPartition changesro Counter32 .1.3.6.1.3.37.1.5.1.1.12 |
isisD13SysStatSPFRunsNumber of times we ran SPF at this level.ro Counter32 .1.3.6.1.3.37.1.5.1.1.13 |
isisD13CircuitCounterTableCircuit specific counters for one instance of the IS-IS protocol on the system. SEQUENCE OF IsisCircuitCounterEntry .1.3.6.1.3.37.1.5.2 |
isisD13CircuitCounterEntryAn isisD13CircCountEntry exists for each circuit used by Integrated IS-IS on this system. IsisCircuitCounterEntry .1.3.6.1.3.37.1.5.2.1 |
isisD13CircuitTypeWhat type of circuit saw these counts? The point to point Hello PDU includes both L1 and L2, and ISs form a single adjacency on point to point links. Thus we combine counts on point to point links into one group. Enumeration .1.3.6.1.3.37.1.5.2.1.1 |
isisD13CircAdjChangesThe number of times an adjacency state change has occurred on this circuit.ro Counter32 .1.3.6.1.3.37.1.5.2.1.2 |
isisD13CircNumAdjThe number of adjacencies on this circuit.ro Unsigned32 .1.3.6.1.3.37.1.5.2.1.3 |
isisD13CircInitFailsThe number of times initialization of this circuit has failed.ro Counter32 .1.3.6.1.3.37.1.5.2.1.4 |
isisD13CircRejAdjsThe number of times an adjacency has been rejected on this circuit.ro Counter32 .1.3.6.1.3.37.1.5.2.1.5 |
isisD13CircIDFieldLenMismatchesThe number of times an IS-IS control PDU with an ID field length different to that for this system has been received.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.2.1.6 |
isisD13CircMaxAreaAddrMismatchesThe number of times an IS-IS control PDU with a max area address field different to that for this system has been received.ro Counter32 .1.3.6.1.3.37.1.5.2.1.7 |
isisD13CircAuthTypeFailsThe number of times an IS-IS control PDU with an auth type field different to that for this system has been received.ro Counter32 .1.3.6.1.3.37.1.5.2.1.8 |
isisD13CircAuthFailsThe number of times an IS-IS control PDU with the correct auth type has failed to pass authentication validation.ro Counter32 .1.3.6.1.3.37.1.5.2.1.9 |
isisD13CircLANDesISChangesThe number of times the Designated IS has changed on this circuit at this level. If the circuit is point to point, this count is zero.ro Counter32 .1.3.6.1.3.37.1.5.2.1.10 |
isisD13PacketCounterTableInformation about IS-IS protocol traffic at one level on one circuit in one direction SEQUENCE OF IsisPacketCounterEntry .1.3.6.1.3.37.1.5.3 |
isisD13PacketCounterEntryInformation about IS-IS protocol traffic at one level on one circuit in one direction IsisPacketCounterEntry .1.3.6.1.3.37.1.5.3.1 |
isisD13PacketCountLevelThe level at which these PDU counts have been collected. Enumeration .1.3.6.1.3.37.1.5.3.1.1 |
isisD13PacketCountDirectionWere we sending or receiving these PDUs? Enumeration .1.3.6.1.3.37.1.5.3.1.2 |
isisD13PacketCountIIHelloThe number of IS-IS Hello PDUs seen in this direction at this level. Point-to-Point IIH PDUs are counted at Level 1 if the value of their Circuit Type field is 1, and are counted at Level 2 otherwise.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.3.1.3 |
isisD13PacketCountISHelloThe number of ES-IS Hello PDUs seen in this direction. ISH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.3.1.4 |
isisD13PacketCountESHelloThe number of ES Hello PDUs seen in this direction. ESH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.3.1.5 |
isisD13PacketCountLSPThe number of IS-IS LSPs seen in this direction at this level.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.3.1.6 |
isisD13PacketCountCSNPThe number of IS-IS CSNPs seen in this direction at this level.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.3.1.7 |
isisD13PacketCountPSNPThe number of IS-IS PSNPs seen in this direction at this level.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.3.1.8 |
isisD13PacketCountUnknownThe number of unknown IS-IS PDUs seen at this level.ro Counter32 UNITS "frames" .1.3.6.1.3.37.1.5.3.1.9 |
isisD13ISAdjThis object describes attributes associated with an adjacent Protocol Peer. OBJECT IDENTIFIER .1.3.6.1.3.37.1.6 |
isisD13ISAdjTableThe table of adjacencies to Intermediate Systems. SEQUENCE OF IsisISAdjEntry .1.3.6.1.3.37.1.6.1 |
isisD13ISAdjEntryEach entry corresponds to one adjacency to an Intermediate System on this system. IsisISAdjEntry .1.3.6.1.3.37.1.6.1.1 |
isisD13ISAdjIndexA unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created automatically. Integer32 .1.3.6.1.3.37.1.6.1.1.1 |
isisD13ISAdjStateThe state of the adjacencyro Enumeration .1.3.6.1.3.37.1.6.1.1.2 |
isisD13ISAdj3WayStateThe 3Way state of the adjacency. These are picked to match the historical on-the-wire representation of the 3Way state, and are not intended to match isisD13ISAdjState.ro Enumeration .1.3.6.1.3.37.1.6.1.1.3 |
isisD13ISAdjNeighSNPAAddressThe SNPA address of the neighboring system.ro OSINSAddress .1.3.6.1.3.37.1.6.1.1.4 |
isisD13ISAdjNeighSysTypeThe type of the neighboring system.ro Enumeration .1.3.6.1.3.37.1.6.1.1.5 |
isisD13ISAdjNeighSysIDThe system ID of the neighboring Intermediate System.ro SystemID .1.3.6.1.3.37.1.6.1.1.6 |
isisD13ISAdjNbrExtendedCircIDThe 4 byte Extended Circuit ID learned from the Neighbor during 3-way handshake, or 0.ro Unsigned32 .1.3.6.1.3.37.1.6.1.1.7 |
isisD13ISAdjUsageHow is the adjacency used? On a point-to-point link, this might be level1and2, but on a LAN, the usage will be level1 on the adjacency between peers at level 1, and level2 for the adjacency between peers at level 2.ro Enumeration .1.3.6.1.3.37.1.6.1.1.8 |
isisD13ISAdjHoldTimerThe holding time in seconds for this adjacency. This value is based on received IIH PDUs and the elapsed time since receipt.ro Unsigned16TC .1.3.6.1.3.37.1.6.1.1.9 |
isisD13ISAdjNeighPriorityPriority of the neighboring Intermediate System for becoming the Designated Intermediate System.ro ISPriority .1.3.6.1.3.37.1.6.1.1.10 |
isisD13ISAdjLastUpTimeIf the isisD13ISAdjState is in state 'up', the value of sysUpTime when the adjacency most recently entered the state 'up', or 0 if it has never been in state 'up'.ro TimeTicks UNITS "seconds" .1.3.6.1.3.37.1.6.1.1.11 |
isisD13ISAdjAreaAddrTableThis table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. SEQUENCE OF IsisISAdjAreaAddrEntry .1.3.6.1.3.37.1.6.2 |
isisD13ISAdjAreaAddrEntryEach entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs. IsisISAdjAreaAddrEntry .1.3.6.1.3.37.1.6.2.1 |
isisD13ISAdjAreaAddrIndexAn index for the areas associated with one neighbor. This provides a simpler way to walk the table. Integer32 .1.3.6.1.3.37.1.6.2.1.1 |
isisD13ISAdjAreaAddressOne Area Address as reported in IIH PDUs received from the neighbor.ro OSINSAddress .1.3.6.1.3.37.1.6.2.1.2 |
isisD13ISAdjIPAddrTableThis table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. SEQUENCE OF IsisISAdjIPAddrEntry .1.3.6.1.3.37.1.6.3 |
isisD13ISAdjIPAddrEntryEach entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs. IsisISAdjIPAddrEntry .1.3.6.1.3.37.1.6.3.1 |
isisD13ISAdjIPAddrIndexAn index to this table which identifies the IP addresss to which this entry belongs. Integer32 .1.3.6.1.3.37.1.6.3.1.1 |
isisD13ISAdjIPAddressTypeThe type of one IP Address as reported in IIH PDUs received from the neighbor.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.37.1.6.3.1.2 |
isisD13ISAdjIPAddressOne IP Address as reported in IIH PDUs received from the neighbor.ro InetAddress .1.3.6.1.3.37.1.6.3.1.3 |
isisD13ISAdjProtSuppTableThis table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs. SEQUENCE OF IsisISAdjProtSuppEntry .1.3.6.1.3.37.1.6.4 |
isisD13ISAdjProtSuppEntryEach entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs. IsisISAdjProtSuppEntry .1.3.6.1.3.37.1.6.4.1 |
isisD13ISAdjProtSuppProtocolOne supported protocol as reported in IIH PDUs received from the neighbor.ro SupportedProtocol .1.3.6.1.3.37.1.6.4.1.1 |
isisD13ReachAddrThis object describes attributes associated with a configured address OBJECT IDENTIFIER .1.3.6.1.3.37.1.7 |
isisD13RATableThe table of Reachable Addresses to NSAPs or Address Prefixes. SEQUENCE OF IsisRAEntry .1.3.6.1.3.37.1.7.1 |
isisD13RAEntryEach entry defines a Reachable Address to a NSAP or Address Prefix. IsisRAEntry .1.3.6.1.3.37.1.7.1.1 |
isisD13RAIndexThe identifier for this isisD13RAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. This object follows the index and ManualOrAutomatic behaviors. Integer32 .1.3.6.1.3.37.1.7.1.1.1 |
isisD13RAExistStateThe existence state of this Reachable Address. This object follows the ManualOrAutomatic behaviors.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.37.1.7.1.1.2 |
isisD13RAAdminStateThe administrative state of the Reachable Address. This object follows the AdminState and ManualOrAutomatic behaviors.rw AdminState .1.3.6.1.3.37.1.7.1.1.3 |
isisD13RAAddrPrefixThe destination of this Reachable Address. This is an Address Prefix. This object follows the replaceOnlyWhileDisabled and ManualOrAutomatic behaviors.rw OSINSAddress .1.3.6.1.3.37.1.7.1.1.4 |
isisD13RAMapTypeThe type of mapping to be employed to ascertain the SNPA Address which should be used in forwarding PDUs for this Reachable Address prefix. This object follows the ManualOrAutomatic behavior. The following values of mapping type are defined: none: The mapping is null because the neighbor SNPA is implicit by nature of the subnetwork (e.g. a point-to-point linkage). explicit: The subnetwork addresses in the object isisD13RASNPAAddress is to be used. extractIDI: The SNPA is embedded in the IDI of the destination NSAP Address. The mapping algorithm extracts the SNPA to be used according to the format and encoding rules of ISO8473/Add2. This SNPA extraction algorithm can be used in conjunction with Reachable Address prefixes from the X.121, F.69, E.163 and E.164 addressing subdomains. extractDSP: All, or a suffix, of the SNPA is embedded in the DSP of the destination address. This SNPA extraction algorithm extracts the embedded subnetwork addressing information by performing a logical AND of the isisD13RASNPAMask object value with the destination address. The part of the SNPA extracted from the destination NSAP is appended to the isisD13RASNPAPrefix object value to form the next hop subnetwork addressing information.rw Enumeration .1.3.6.1.3.37.1.7.1.1.5 |
isisD13RAMetricThe metric value for reaching the specified prefix over this circuit. This object follows the ManualOrAutomatic behavior.rw DefaultMetric .1.3.6.1.3.37.1.7.1.1.6 |
isisD13RAMetricTypeIndicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior.rw MetricType .1.3.6.1.3.37.1.7.1.1.7 |
isisD13RASNPAAddressThe SNPA Address to which a PDU may be forwarded in order to reach a destination which matches the address prefix of the Reachable Address. This object follows the ManualOrAutomatic behavior.rw OSINSAddress .1.3.6.1.3.37.1.7.1.1.8 |
isisD13RASNPAMaskA bit mask with 1 bits indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extraction the first octet of the isisD13RASNPAMask object value is aligned with the first octet (AFI) of the NSAP Address. If the isisD13RASNPAMask object value and NSAP Address are of different lengths, the shorter of the two is logically padded with zeros before performing the extraction. This object follows the ManualOrAutomatic behavior.rw OSINSAddress .1.3.6.1.3.37.1.7.1.1.9 |
isisD13RASNPAPrefixA fixed SNPA prefix for use when the isisD13RAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNPA part that is extracted from the effective destination address. For Reachable Address prefixes in which the entire SNPA is embedded in the DSP the SNPA Prefix shall be null. This object follows the ManualOrAutomatic behavior.rw OSINSAddress .1.3.6.1.3.37.1.7.1.1.10 |
isisD13RATypeThe type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol (eg. IDRP).rw Enumeration .1.3.6.1.3.37.1.7.1.1.11 |
isisD13IPReachAddrThis object describes attributes associated with IP routes learned by configuration or through another protocol. OBJECT IDENTIFIER .1.3.6.1.3.37.1.8 |
isisD13IPRATableThe table of IP Reachable Addresses to networks, subnetworks or hosts either manually configured or learned from another protocol. SEQUENCE OF IsisIPRAEntry .1.3.6.1.3.37.1.8.1 |
isisD13IPRAEntryEach entry defines an IP Reachable Address to a network, subnetwork or host. IsisIPRAEntry .1.3.6.1.3.37.1.8.1.1 |
isisD13IPRADestTypeThe type of this IP Reachable Address. This object follows the ManualOrAutomatic behavior. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.37.1.8.1.1.1 |
isisD13IPRADestThe destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. This object follows the ManualOrAutomatic behavior. InetAddress .1.3.6.1.3.37.1.8.1.1.2 |
isisD13IPRADestPrefixLenThe length of the IP Netmask for Reachability Address. This object follows the ManualOrAutomatic behavior. InetAddressPrefixLength .1.3.6.1.3.37.1.8.1.1.3 |
isisD13IPRANextHopTypeThe type of the IP next hop address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.37.1.8.1.1.4 |
isisD13IPRANextHopThe IP next hop to this destination.rw InetAddress .1.3.6.1.3.37.1.8.1.1.5 |
isisD13IPRATypeThe type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol. This object follows the ManualOrAutomatic behavior.rw Enumeration .1.3.6.1.3.37.1.8.1.1.6 |
isisD13IPRAExistStateThe state of this IP Reachable Address. This object follows the ExistenceState and ManualOrAutomatic behaviors.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.37.1.8.1.1.7 |
isisD13IPRAAdminStateThe administrative state of the IP Reachable Address. This object follows the AdminState and ManualOrAutomatic behaviors.rw AdminState .1.3.6.1.3.37.1.8.1.1.8 |
isisD13IPRAMetricThe metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior.rw DefaultMetric .1.3.6.1.3.37.1.8.1.1.9 |
isisD13IPRAMetricTypeIndicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior.rw MetricType .1.3.6.1.3.37.1.8.1.1.10 |
isisD13IPRAFullMetricThe wide metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior.rw FullMetric .1.3.6.1.3.37.1.8.1.1.11 |
isisD13IPRASNPAAddressThe SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. This object follows the ManualOrAutomatic behavior.rw OSINSAddress .1.3.6.1.3.37.1.8.1.1.12 |
isisD13IPRASourceTypeThe origin of this route.ro Enumeration .1.3.6.1.3.37.1.8.1.1.13 |
isisD13LSPDataBaseThis object describes the collection of Link State PDUs known to the system. OBJECT IDENTIFIER .1.3.6.1.3.37.1.9 |
isisD13LSPSummaryTableThe table of LSP Headers. SEQUENCE OF IsisLSPSummaryEntry .1.3.6.1.3.37.1.9.1 |
isisD13LSPSummaryEntryEach entry describes an LSP current stored in the system. IsisLSPSummaryEntry .1.3.6.1.3.37.1.9.1.1 |
isisD13LSPLevelAt which level does this LSP appear? ISLevel .1.3.6.1.3.37.1.9.1.1.1 |
isisD13LSPIDThe 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. LinkStatePDUID .1.3.6.1.3.37.1.9.1.1.2 |
isisD13LSPSeqThe sequence number for this LSP.ro Unsigned32 .1.3.6.1.3.37.1.9.1.1.3 |
isisD13LSPZeroLifeIs this LSP being purged by this System?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.37.1.9.1.1.4 |
isisD13LSPChecksumThe 16 bit Fletcher Checksum.ro Unsigned16TC .1.3.6.1.3.37.1.9.1.1.5 |
isisD13LSPLifetimeRemainThe remaining lifetime in seconds for this LSP.ro Unsigned16TC UNITS "seconds" .1.3.6.1.3.37.1.9.1.1.6 |
isisD13LSPPDULengthThe length of this LSP.ro Unsigned16TC .1.3.6.1.3.37.1.9.1.1.7 |
isisD13LSPAttributesFlags carried by the LSP.ro Unsigned8TC .1.3.6.1.3.37.1.9.1.1.8 |
isisD13LSPTLVTableThe contents of each LSP. SEQUENCE OF IsisLSPTLVEntry .1.3.6.1.3.37.1.9.2 |
isisD13LSPTLVEntryEach entry describes an LSP current stored in the system. IsisLSPTLVEntry .1.3.6.1.3.37.1.9.2.1 |
isisD13LSPTLVIndexThe index of this TLV in the LSP. The first TLV has index 1 and the Nth TLV has an index of N. Unsigned32 .1.3.6.1.3.37.1.9.2.1.1 |
isisD13LSPTLVSeqThe sequence number for this LSP.ro Unsigned32 .1.3.6.1.3.37.1.9.2.1.2 |
isisD13LSPTLVChecksumThe 16 bit Fletcher Checksum.ro Unsigned16TC .1.3.6.1.3.37.1.9.2.1.3 |
isisD13LSPTLVTypeThe Type of this TLV.ro Unsigned8TC .1.3.6.1.3.37.1.9.2.1.4 |
isisD13LSPTLVLenThe length of this TLV.ro Unsigned8TC .1.3.6.1.3.37.1.9.2.1.5 |
isisD13LSPTLVValueThe value of this TLV.ro OCTET STRING .1.3.6.1.3.37.1.9.2.1.6 |
isisD13NotificationObjects included in Notifications. OBJECT IDENTIFIER .1.3.6.1.3.37.1.10 |
isisD13NotificationTableObjects seen in the most recent notification this instance of the IS-IS protocol. SEQUENCE OF IsisNotificationEntry .1.3.6.1.3.37.1.10.1 |
isisD13NotificationEntryEach entry defines variables relevant to notifications for one instance of the IS-IS protocol. IsisNotificationEntry .1.3.6.1.3.37.1.10.1.1 |
isisD13PduLspIdAn Octet String that uniquely identifies a Link State PDU.ro LinkStatePDUID .1.3.6.1.3.37.1.10.1.1.1 |
isisD13PduFragmentHolds up to the first 64 bytes of a PDU that triggered the notification.ro IsisPDUHeader .1.3.6.1.3.37.1.10.1.1.2 |
isisD13PduFieldLenHolds the System ID length reported in PDU we received.ro Unsigned8TC .1.3.6.1.3.37.1.10.1.1.3 |
isisD13PduMaxAreaAddressHolds the Max Area Addresses reported in a PDU we received.ro Unsigned8TC .1.3.6.1.3.37.1.10.1.1.4 |
isisD13PduProtocolVersionHolds the Protocol version reported in PDU we received.ro Unsigned8TC .1.3.6.1.3.37.1.10.1.1.5 |
isisD13PduLspSizeHolds the size of LSP we received that is too big to forward.ro Integer32 .1.3.6.1.3.37.1.10.1.1.6 |
isisD13PduOriginatingBufferSizeHolds the size of isisD13SysOrigLSPBuffSize advertised by peer in TLV.ro Unsigned16TC .1.3.6.1.3.37.1.10.1.1.7 |
isisD13PduProtocolsSupportedThe list of protocols supported by an adjacent system. This may be empty.ro OCTET STRING .1.3.6.1.3.37.1.10.1.1.8 |
isisD13AdjStateThe current state of an adjacency.ro Enumeration .1.3.6.1.3.37.1.10.1.1.9 |
isisD13PduRemoteRouterIDThe Router ID of a remote system. If not known, we set this to 0.ro Unsigned32 .1.3.6.1.3.37.1.10.1.1.10 |
isisD13Notifications OBJECT IDENTIFIER .1.3.6.1.3.37.2 |
isisD13TrapPrefix OBJECT IDENTIFIER .1.3.6.1.3.37.2.0 |
isisD13DatabaseOverloadThis notification is generated when the system enters or leaves the Overload state. The number of times this has be generated and cleared is kept track of by isisD13SysStatLSPDbaseOloads. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.1 |
isisD13ManualAddressDropsThis notification is generated when one of the manual areaAddresses assigned to this system is ignored when computing routes. The object isisD13ManAreaAddrExistState describes the area that has been dropped. The number of times this event has been generated is counted by isisD13SysManAddrDropFromAreas. This notification is edge triggered, and should not be regenerated until an address that was used in the previous computation has been dropped. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.2 |
isisD13CorruptedLSPDetectedThis notification is generated when we find that an LSP that was stored in memory has become corrupted. The number of times this has been generated is counted by isisD13SysCorrLSPs. We forward an LSP ID. We may have independent knowledge of the ID, but in some implementations there is a chance that the ID itself will be corrupted. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.3 |
isisD13AttemptToExceedMaxSequenceWhen the sequence number on an LSP we generate wraps the 32 bit sequence counter, we purge and wait to re-announce this information. This notification describes that event. Since these should not be generated rapidly, we generate an event each time this happens. While the first 6 bytes of the LSPID are ours, the other two contain useful information. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.4 |
isisD13IDLenMismatchA notification sent when we receive a PDU with a different value of the System ID Length. This notification includes the an index to identify the circuit where we saw the PDU and the header of the PDU which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. This decision is up to the agent to make, and may be based on the circuit or on some MAC level information. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.5 |
isisD13MaxAreaAddressesMismatchA notification sent when we receive a PDU with a different value of the Maximum Area Addresses. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.6 |
isisD13OwnLSPPurgeA notification sent when we receive a PDU with our systemID and zero age. This notification includes the circuit Index and router ID from the LSP, if available, which may help a network manager identify the source of the confusion. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.7 |
isisD13SequenceNumberSkipWhen we receive an LSP with out System ID and different contents, we may need to reissue the LSP with a higher sequence number. We send this notification if we need to increase the sequence number by more than one. If two Intermediate Systems are configured with the same System ID, this notification will fire. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.8 |
isisD13AuthenticationTypeFailureA notification sent when we receive a PDU with the wrong authentication type field. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.9 |
isisD13AuthenticationFailureA notification sent when we receive a PDU with incorrect authentication information field. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.10 |
isisD13VersionSkewA notification sent when we receive a Hello PDU from an IS running a different version of the protocol. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. This decision is up to the agent to make, and may be based on the circuit or on some MAC level information. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.11 |
isisD13AreaMismatchA notification sent when we receive a Hello PDU from an IS which does not share any area address. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. This decision is up to the agent to make, and may be based on the circuit or on some MAC level information. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.12 |
isisD13RejectedAdjacencyA notification sent when we receive a Hello PDU from an IS, but do not establish an adjacency for some reason. This should be an edge-triggered notification. We should not send a second notification about PDUs received from the same source. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.13 |
isisD13LSPTooLargeToPropagateA notification sent when we attempt to propagate an LSP which is larger than the dataLinkBlockSize for the circuit. This should be an edge-triggered notification. We should not send a second notification about PDUs received from the same source. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.14 |
isisD13OrigLSPBuffSizeMismatchA notification sent when a Level 1 LSP or Level 2 LSP is received which is larger than the local value for isisD13OriginatingBufferSize, or when an LSP is received containing the isisD13OriginatingBufferSize option and the value in the PDU option field does not match the local value for isisD13OriginatingBufferSize. We pass up the size from the option field or the size of the LSP that exceeds our configuration. This should be an edge-triggered notification. We should not send a second notification about PDUs received from the same source. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.15 |
isisD13ProtocolsSupportedMismatchA notification sent when a non-pseudonode segment 0 LSP is received that has no matching protocols supported. This may be because the system does not generate the field, or because there are no common elements. The list of protocols supported should be included in the notification: it may be empty if the TLV is not supported, or if the TLV is empty. This should be an edge-triggered notification. We should not send a second notification about PDUs received from the same source. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.16 |
isisD13AdjacencyChangeA notification sent when an adjacency changes state, entering or leaving state up. The first 6 bytes of the isisD13PduLspId are the SystemID of the adjacent IS. The isisD13AdjState is the new state of the adjacency. NOTIFICATION-TYPE .1.3.6.1.3.37.2.0.17 |
isisD13Conformance OBJECT IDENTIFIER .1.3.6.1.3.37.3 |
isisD13Groups OBJECT IDENTIFIER .1.3.6.1.3.37.3.1 |
isisD13SystemGroupThe collections of objects used to manage an IS-IS router. Unknown .1.3.6.1.3.37.3.1.1 |
isisD13CircuitGroupThe collection of objects used to describe in IS-IS Circuit. Unknown .1.3.6.1.3.37.3.1.2 |
isisD13ISAdjGroupThe collections of objects used to manage an IS-IS Adjacency. Unknown .1.3.6.1.3.37.3.1.3 |
isisD13NotificationObjectGroupThe objects used to record notification parameters. Unknown .1.3.6.1.3.37.3.1.4 |
isisD13NotificationGroupThe collections of notifications sent by an IS. Unknown .1.3.6.1.3.37.3.1.5 |
isisD13ISPDUCounterGroupThe collections of objects used to count protocol PDUs. Unknown .1.3.6.1.3.37.3.1.6 |
isisD13RATableGroupThe collections of objects used to manage the reachable NSAP prefixes. Unknown .1.3.6.1.3.37.3.1.7 |
isisD13ISIPRADestGroupThe collections of objects used to manage configured IP addresses. Unknown .1.3.6.1.3.37.3.1.8 |
isisD13LSPGroupThe collections of objects used to observe the LSP Data Base. Unknown .1.3.6.1.3.37.3.1.9 |
isisD13Compliances OBJECT IDENTIFIER .1.3.6.1.3.37.3.2 |
isisD13ComplianceThe compliance statement for agents that support the IS-IS MIB Unknown .1.3.6.1.3.37.3.2.1 |
isisD13AdvancedComplianceThe compliance statement for agents that support the IS-IS MIB Unknown .1.3.6.1.3.37.3.2.2 |