IPV6-STATIC-ROUTE-MIB
AI MIB Summary
The IPV6-STATIC-ROUTE-MIB provides management access to the IPv6 static routing table and ARP table entries on proprietary enterprise network devices. It enables the monitoring and configuration of specific static route destinations, next-hop addresses, and associated interface bindings for IPv6 traffic forwarding.
The structure of the IPv6 static Route and ARP table management for the proprietary enterprise.
Main OID:
swIPv6StaticRouteMIB.dlink-common-mgmt.26
24
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
swIPv6StaticRouteMIBThe structure of the IPv6 static Route and ARP table management for the
proprietary enterprise. MODULE-IDENTITY .dlink-common-mgmt.26 |
swIPv6StaticRouteCtrl OBJECT IDENTIFIER .dlink-common-mgmt.26.1 |
swIPv6StaticRouteInfo OBJECT IDENTIFIER .dlink-common-mgmt.26.2 |
swIPv6StaticRouteMgmt OBJECT IDENTIFIER .dlink-common-mgmt.26.3 |
swIPv6StaticRouteTableThis entity's IPv6 static Routing table. SEQUENCE OF SwIPv6StaticRouteEntry .dlink-common-mgmt.26.3.1 |
swIPv6StaticRouteEntryA particular route to a particular destination, under a particular policy.
Once an entry is built, it cannot be modified. That is, it just supports create
and delete actions. SwIPv6StaticRouteEntry .dlink-common-mgmt.26.3.1.1 |
swIPv6StaticRouteDestSpecify the destination network IPv6 address for the route.
If swIPv6StaticRouteDest and swIPv6StaticRoutePrefixLen are both 0, it means the default route.ro Ipv6Address .dlink-common-mgmt.26.3.1.1.1 |
swIPv6StaticRoutePrefixLenThe prefix length for this IPv6 address.
If swIPv6StaticRouteDest and swIPv6StaticRoutePrefixLen are both 0, it means the default route.ro INTEGER .dlink-common-mgmt.26.3.1.1.2 |
swIPv6StaticRouteInterfaceNameThis object indicates the name of the interface.ro DisplayString .dlink-common-mgmt.26.3.1.1.3 |
swIPv6StaticRouteNextHopSpecify the next hop address for this route.ro Ipv6Address .dlink-common-mgmt.26.3.1.1.4 |
swIPv6StaticRouteMetricThe routing metric for this route.rw INTEGER .dlink-common-mgmt.26.3.1.1.5 |
swIPv6StaticRouteWeightSpecified weight value. Used for weighted multipath. The default setting is 1.rw INTEGER .dlink-common-mgmt.26.3.1.1.6 |
swIPv6StaticProtocolThe protocol state for this route.ro DisplayString (SNMPv2-TC) .dlink-common-mgmt.26.3.1.1.7 |
swIPv6StaticRouteStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.26.3.1.1.8 |
swIPv6StaticRouteBkupStateprimary: Specifies the route as the primary route to the destination.
backup: Specifies the route as the backup route to the destination.
none: The route is not specified. If the route is not specified as the
primary route or the backup route, then it will be auto-assigned
by the system. The first created is the primary, the second
created is the backup.rw Enumeration .dlink-common-mgmt.26.3.1.1.9 |
swIPv6NeighborCacheMgmt OBJECT IDENTIFIER .dlink-common-mgmt.26.4 |
swIPv6NeighborCacheTableThis entity's IPv6 NeighborCache table. SEQUENCE OF SwIPv6NeighborCacheEntry .dlink-common-mgmt.26.4.1 |
swIPv6NeighborCacheEntryA particular route to a particular destination, under a particular policy.
Once an entry is built, it cannot be modified. That is, it just supports create
and delete actions. SwIPv6NeighborCacheEntry .dlink-common-mgmt.26.4.1.1 |
swIPv6NeighborCacheIPv6AddressThe destination IPv6 address of this neighbor.ro Ipv6Address .dlink-common-mgmt.26.4.1.1.1 |
swIPv6NeighborCacheMacAddressThe MAC address of this neighbor .ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.26.4.1.1.2 |
swIPv6NeighborCacheInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .dlink-common-mgmt.26.4.1.1.3 |
swIPv6NeighborCacheReachStateThis object indicates the reachability state of this neighbor.ro Enumeration .dlink-common-mgmt.26.4.1.1.4 |
swIPv6NeighborCacheRouteStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.26.4.1.1.5 |
swIPv6NeighborCacheDeleteActionThis object will delete the cached neighbor entries.
all: Deletes all cached neighbor entries include static
and dynamic entries.
static: Deletes all the cached static neighbor entries.
dynamic: Deletes all the cached dynamic neighbor entries.rw Enumeration .dlink-common-mgmt.26.4.2 |