IPV4INTERFACE-MIB
The IPV4INTERFACE-MIB provides vendor-specific extensions for ArrowPoint devices to monitor IPv4 interface statistics, including operational status, IP address assignments, and traffic counters. This module enables the tracking of interface-level metrics such as octet counts, packet errors, and drop rates specific to the ArrowPoint enterprise hardware platform.
Imported Objects
Objects
18 total| Object Name |
|---|
apIpv4InterfaceMibThis MIB module describes the ArrowPoint enterprise MIB support for IPv4 Interfaces MODULE-IDENTITY .1.3.6.1.4.1.2467.1.9.2.1 |
apIpv4InterfaceTableA table of IP Interfaces. SEQUENCE OF ApIpv4InterfaceEntry .1.3.6.1.4.1.2467.1.9.2.2 |
apIpv4InterfaceEntryArrowPoint interface table extensions ApIpv4InterfaceEntry .1.3.6.1.4.1.2467.1.9.2.2.1 |
apIpv4IfAddressThe Local Interface IP Addressro IpAddress .1.3.6.1.4.1.2467.1.9.2.2.1.1 |
apIpv4IfCircuitIfIndexThe Circuit ifIndex associated with the local interfacero Integer32 -- LOOK!! InterfaceIndex .1.3.6.1.4.1.2467.1.9.2.2.1.2 |
apIpv4IfNetPrefixLenThe network prefix length associated with this entryrw Integer32 .1.3.6.1.4.1.2467.1.9.2.2.1.3 |
apIpv4IfDisableUsed to disable or enable an interface.rw Enumeration .1.3.6.1.4.1.2467.1.9.2.2.1.4 |
apIpv4IfStateCurrent state of the interface.ro Enumeration .1.3.6.1.4.1.2467.1.9.2.2.1.5 |
apIpv4IfBroadcastIpAddressThe broadcast IP Address associated with this entry. If left zero, the all-ones host is used for numbered interfaces. 255.255.255.255 is always used for unnumbered.rw IpAddress .1.3.6.1.4.1.2467.1.9.2.2.1.6 |
apIpv4IfRedirectsEnable/disable the transmission of ICMP redirect packets.rw Enumeration .1.3.6.1.4.1.2467.1.9.2.2.1.7 |
apIpv4IfUnreachablesEnable/disable the transmission of ICMP unreachable packets.rw Enumeration .1.3.6.1.4.1.2467.1.9.2.2.1.8 |
apIpv4IfIrdpEnable/disable router discovery.rw Enumeration .1.3.6.1.4.1.2467.1.9.2.2.1.9 |
apIpv4IfIrdpUseMulticastEnable/disable the use of the multicast address 224.0.0.1 for transmission of router discovery packets. Default is disabled (use 255.255.255.255).rwobsolete Enumeration .1.3.6.1.4.1.2467.1.9.2.2.1.10 |
apIpv4IfIrdpMaxMaximum interval between advertisements (seconds). Default is 600 seconds.rwobsolete INTEGER .1.3.6.1.4.1.2467.1.9.2.2.1.11 |
apIpv4IfIrdpMinMinimum interval between advertisements (seconds). Default (0) is means use 0.75 times max. If non-zero, this value must be less than apIpv4IfIrdpMax.rwobsolete INTEGER .1.3.6.1.4.1.2467.1.9.2.2.1.12 |
apIpv4IfIrdpPrefRouter preference value to advertise. Default is 0.rw INTEGER .1.3.6.1.4.1.2467.1.9.2.2.1.13 |
apIpv4IfStatus(fill in later)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.2.2.1.14 |
apIpv4IfRunRedundancyProtoIndicates whether a redundancy protocol is run on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.2.2.1.15 |
More MIBs from ArrowPoint
Browse all ArrowPointMIBs →SNMP MIB module
SNMP MIB module
The APENT-MIB provides management definitions for ArrowPoint Communications enterprise devices, specifically monitoring session states, connection counts, and performance metrics for their application delivery controllers and load balancers. It enables the collection of operational data regarding active user sessions, server health, and traffic distribution statistics for network visibility and troubleshooting.
The AP64STATS-MIB module provides 64-bit statistical aggregation for RMON, MIB-II, and EtherErrors on Aruba (formerly ProCurve) network switches, enabling precise monitoring of high-volume traffic counters and interface error rates beyond standard 32-bit limitations.
The SVCEXT-MIB provides management access to the ArrowPoint Communications content services table, enabling monitoring of content switching states, server pool configurations, and traffic distribution metrics for legacy ArrowPoint Content Switch appliances.
The CHASSISMGREXT-MIB provides management access to ArrowPoint Communications chassis hardware, specifically enabling monitoring of High Speed Serial Interface (HSSI) module status and performance counters. This module facilitates the tracking of interface operational states, error statistics, and physical layer metrics for HSSI ports within the ArrowPoint enterprise environment.