SVCEXT-MIB
AI MIB Summary
The SVCEXT-MIB provides management access to the ArrowPoint Communications content services table, enabling monitoring of content switching states, server pool configurations, and traffic distribution metrics for legacy ArrowPoint Content Switch appliances.
The MIB module used to describe the ArrowPoint Communications content services table
Main OID:
apSvcExtMib.1.3.6.1.4.1.2467.1.15.1
57
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
apSvcTransitionTrapA service transition trap is generated whenever the the service state transitions from ACTIVE -> DEAD, or DEAD -> ACTIVE. NOTIFICATION-TYPE .1.3.6.1.4.1.2467.1.15.0.1 |
apSvcExtMibThe MIB module used to describe the ArrowPoint Communications content services table MODULE-IDENTITY .1.3.6.1.4.1.2467.1.15.1 |
apSvcTableA list of content service entries. SEQUENCE OF APSvcEntry .1.3.6.1.4.1.2467.1.15.2 |
apSvcEntryA group of information to uniquely identify a content providing service. APSvcEntry .1.3.6.1.4.1.2467.1.15.2.1 |
apSvcNameThe name of the content providing service.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.1 |
apSvcIndexThe unique service index assigned to the name by the SCM.ro Integer32 .1.3.6.1.4.1.2467.1.15.2.1.2 |
apSvcIPAddressThe IP Address the of the content providing service.rw IpAddress .1.3.6.1.4.1.2467.1.15.2.1.3 |
apSvcIPProtocolThe IP Protocol the of the content providing service.rw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.4 |
apSvcPortThe UDP or TCP port of the content providing service.rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.5 |
apSvcKALTypeThe Keepalive detection method.rw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.6 |
apSvcKALFrequencyThe Keepalive frequency of doing keepalive probes in units of seconds.rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.7 |
apSvcKALMaxFailureThe Keepalive maximum number of failures before the service is transitioned to failed state.rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.8 |
apSvcKALRetryPeriodThe Keepalive frequency of probes to the service after it has been transitioned to failed state.rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.9 |
apSvcKALUriThe URI which be checked during an HTTP keepalive.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.10 |
apSvcKALMethodThe HTTP method used for the HTTP keepalive type. The methods operate in the following manner: HEAD -- HTTP HEAD generated. 200 response code required GET -- HTTP GET generated. MD5 Hash of entify body performed. First successful GET (200 response code) becomes reference hash. Deviation from rererence hash result, or non-200 response code, results in service state transition. POST -- Same as GET with substituation of POST method.rw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.11 |
apSvcEnableThe state of the service, either enable or disabledrw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.12 |
apSvcTypeThe type of this serverrw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.13 |
apSvcQOSMinRateThe Average Minimum Bandwidth Rate for this servicerw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.14 |
apSvcQOSMinBWThe Total Bandwidth of this servicerw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.15 |
apSvcWeightThe Service weight which is used in conjunction with load metrics when making load allocation decisions. The weight may be used to bias flows towards the specified service .rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.16 |
apSvcStateThe current service statero Enumeration .1.3.6.1.4.1.2467.1.15.2.1.17 |
apSvcShortLoadThe Service currently sensed load for Short Lived Flowsro Integer32 .1.3.6.1.4.1.2467.1.15.2.1.18 |
apSvcMaxConnectionsThe maximum concurrent number of TCP connections allowed to this servicerw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.19 |
apSvcConnectionsThe current number of TCP connections to this servicero Integer32 .1.3.6.1.4.1.2467.1.15.2.1.20 |
apSvcTransitionsThe number of service state transitions that have occurredro Integer32 .1.3.6.1.4.1.2467.1.15.2.1.21 |
apSvcMaxContentMaximum pieces of content permitted to be replicated upon this service. This object only has validity when this service is configured to have type replication. The pieces of content replicated may by limited by apSvcMaxUsage prior to this object, where the limiting is the min(apSvcMaxContent,apSvcMaxUsage).rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.22 |
apSvcMaxUsageMaximum storage space in MB which may be replicated upon this service. This object only has validity when the this service is configured to have type replication. The storage space usage may be limited by apSvcMaxContent prior to this object, where the limiting is the min(apSvcMaxUsage,apSvcMaxContent).rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.23 |
apSvcMaxAgeThe time in minutes replicated content may exist upon this service before it is aged out. This age out time is applied on a per- replicated-content basis.rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.24 |
apSvcAccessRecordNameAn access record name, present in apFtpTable or apHttpTable, used for replication access when this service is configured to be of type replicationStore, publisher or subscriberrw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.25 |
apSvcStatusStatus entry for this rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2467.1.15.2.1.26 |
apSvcCookieThe unique server cookie for this service.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.27 |
apSvcKALPersistenceThis object controls whether the Keepalive will be attempted over a persistent connection. Persistent connections are supported through HTTP 1.1, and HTTP 1.0 with Connection-KeepAliverw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.28 |
apSvcKALNameThe name of the keepalive that this service will use.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.29 |
apSvcLongLoadThe Service currently sensed load for Long Lived Flowsro Integer32 .1.3.6.1.4.1.2467.1.15.2.1.30 |
apSvcKALPortThe port to use, for TCP & HTTP keepalives. This KAL port designation does not impact 'named' keep- alive configurations. If this object is not configured, keep- alive configurations will utilize the apSvcPort object if present, or default to 80rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.31 |
apSvcPublishNameThe name used to identify the service which publishes for this subscriber. This object is used in conjunction with apSvcPublishState.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.32 |
apSvcPublishStateThe state of this service in relation to publish/subscribe activity.rw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.33 |
apSvcPublishIntervalWhen this service is configured as a publisher, controls when the publisher will attempt to update the subscribers. When this object contains the value 0, it is interpreted as OFF.rw Integer32 .1.3.6.1.4.1.2467.1.15.2.1.34 |
apSvcAccessTypeSpecifies whether the access mechanism associated with this service is of type HTTP or FTPrw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.35 |
apSvcKALHashThis object contains the MD5 hash which will be compared for HTTP keepalives which use the GET method.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.36 |
apSvcKALFTPRecordThis object contains the name of the ftp-record used for a FTP keepaliverw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.37 |
apSvcPublishFileThis object contains the name of the file which the publisher will check for modification on to commence a publish operation. This object is used in conjunction with apSvcPublishIntervalrw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.38 |
apSvcRedirectDomainThe domain name used when a redirect service generates an object moved redirect instead of the service address.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.39 |
apSvcAvgLoadThe Service currently sensed average loadro Integer32 .1.3.6.1.4.1.2467.1.15.2.1.40 |
apSvcIPAddressRangeThe range of IP Addresses of the content providing service.rw INTEGER .1.3.6.1.4.1.2467.1.15.2.1.41 |
apSvcPortRangeThe range of UDP or TCP ports of the content providing service.rw INTEGER .1.3.6.1.4.1.2467.1.15.2.1.42 |
apSvcKALScriptNameThis name represents the script that will be used in conjunction with the keepalive type script. The script will be played everytime the keepalive is issued.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.43 |
apSvcKALScriptArgsThis name represents the script arguments that will be used in conjunction with the keepalive type script.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.44 |
apSvcKALScriptLogThis name represents the script log that can be used to capture output from a keepalive script.rw DisplayString .1.3.6.1.4.1.2467.1.15.2.1.45 |
apSvcCacheByPassControls whether a chache type of services implicit by-pass feature is enabled or disabledrw Enumeration .1.3.6.1.4.1.2467.1.15.2.1.46 |
apSvcLoadThresholdGlobal load threshold, maximum Load Number for service eligibilityrw INTEGER ( 2..254 ) .1.3.6.1.4.1.2467.1.15.3 |
apSvcLoadStepSizeThe granularity of Load Numbers, expressed in msec.rw INTEGER ( 1..1000000000 ) .1.3.6.1.4.1.2467.1.15.4 |
apSvcLoadStepStaticDisables system dynamic Load Step Size calculationrw Enumeration .1.3.6.1.4.1.2467.1.15.5 |
apSvcLoadDecayIntervalThe frequency which an ineligible service, becomes eligible, expressed in teardown report cycles.rw INTEGER ( 1..1000000000 ) .1.3.6.1.4.1.2467.1.15.6 |
apSvcLoadEnableControls system service Load calculationrw Enumeration .1.3.6.1.4.1.2467.1.15.7 |
apSvcLoadSvcStatRptTimeoutThe maximum time period the system will wait to send a teardown report. (in seconds)rw INTEGER ( 0..1000000000 ) .1.3.6.1.4.1.2467.1.15.8 |
apSvcLoadInfoTimeoutThe amount of time (in seconds), which stale load information will be aged out.rw INTEGER ( 0..1000000000 ) .1.3.6.1.4.1.2467.1.15.9 |