IPV4-STATIC-ROUTES-MIB
AI MIB Summary
The IPV4-STATIC-ROUTES-MIB enables the monitoring and configuration of IPv4 static routing table entries on ArrowPoint enterprise networking devices via SNMP. It exposes specific metrics including destination network addresses, next-hop gateway IP addresses, interface bindings, and administrative distance values for static route management.
This MIB module describes the ArrowPoint enterprise MIB support for IPv4 Static Routes.
Main OID:
apIpv4StaticRoutesMib.1.3.6.1.4.1.2467.1.9.5.1
20
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
apIpv4StaticRoutesMibThis MIB module describes the ArrowPoint enterprise MIB support for IPv4 Static Routes. MODULE-IDENTITY .1.3.6.1.4.1.2467.1.9.5.1 |
apIpv4StaticRouteTableA table of IP static routes. SEQUENCE OF ApIpv4StaticRouteEntry .1.3.6.1.4.1.2467.1.9.5.2 |
apIpv4StaticRouteEntryArrowPoint static route table extensions ApIpv4StaticRouteEntry .1.3.6.1.4.1.2467.1.9.5.2.1 |
apIpv4SrAddressThe route addressro IpAddress .1.3.6.1.4.1.2467.1.9.5.2.1.1 |
apIpv4SrPrefixLenThe prefix length of the route.ro Integer32 .1.3.6.1.4.1.2467.1.9.5.2.1.2 |
apIpv4SrNextHopThe address of the next hop. If this is not a legitimate IP address, it is the ifIndex of an unnumbered interface.ro IpAddress .1.3.6.1.4.1.2467.1.9.5.2.1.3 |
apIpv4SrDistanceThe administrative distance to assign to the route.rw Integer32 .1.3.6.1.4.1.2467.1.9.5.2.1.4 |
apIpv4SrRepeatDEBUG FEATURE ONLY: The number of consecutive routes to create, starting at this address. Not available in shipping code.rw Integer32 .1.3.6.1.4.1.2467.1.9.5.2.1.5 |
apIpv4SrInUseThe current state of the route in relation to the forwarding table.ro Enumeration .1.3.6.1.4.1.2467.1.9.5.2.1.6 |
apIpv4SrStatus(fill in later)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.5.2.1.7 |
apIpv4SrScmOnlyThis route is only used for packets originating from the box and is not propagated to SFMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.5.2.1.8 |
apIpv4SrFirewallIndicates whether the switch should use firewall load-balancing for this route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.5.2.1.9 |
apIpv4SrRouteIndexIdentifies the route index.rw Integer32 .1.3.6.1.4.1.2467.1.9.5.2.1.10 |
apIpv4StaticFirewallTableA table of IP static firewalls. SEQUENCE OF ApIpv4StaticFirewallEntry .1.3.6.1.4.1.2467.1.9.5.3 |
apIpv4StaticFirewallEntryArrowPoint static firewall table extensions ApIpv4StaticFirewallEntry .1.3.6.1.4.1.2467.1.9.5.3.1 |
apIpv4FirewallIndexThe firewall indexrw Integer32 .1.3.6.1.4.1.2467.1.9.5.3.1.1 |
apIpv4FirewallNextHopThe address of the next hop.rw IpAddress .1.3.6.1.4.1.2467.1.9.5.3.1.2 |
apIpv4FirewallRemoteAddressThe assigned firewall IP address that connects to the remote subnet.rw IpAddress .1.3.6.1.4.1.2467.1.9.5.3.1.3 |
apIpv4FirewallRemoteSwitchThe switch IP address that is connected to firewall remote subnet.rw IpAddress .1.3.6.1.4.1.2467.1.9.5.3.1.4 |
apIpv4FirewallStatus(fill in later)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.5.3.1.5 |