IPV4-RIP-MIB
Imported Objects
Objects
28 total| Object Name |
|---|
apIpv4RipMibThis MIB module describes the ArrowPoint enterprise MIB support for the Routing Information Protocol MODULE-IDENTITY .1.3.6.1.4.1.2467.1.9.3.1.1 |
apIpv4RipRedistributeStaticIf enabled, static routes will be advertised by RIP.rw Enumeration .1.3.6.1.4.1.2467.1.9.3.1.2 |
apIpv4RipStaticMetricIf static routes are advertised by RIP, this is the metric to use when advertising the routes.rw INTEGER ( 1..15 ) .1.3.6.1.4.1.2467.1.9.3.1.3 |
apIpv4RipRedistributeOspfIf enabled, OSPF routes will be advertised by RIP.rw Enumeration .1.3.6.1.4.1.2467.1.9.3.1.4 |
apIpv4RipOspfMetricIf OSPF routes are advertised by RIP, this is the metric to use when advertising the routes.rw INTEGER ( 1..15 ) .1.3.6.1.4.1.2467.1.9.3.1.5 |
apIpv4RipRedistributeLocalIf enabled, local routes will be advertised by RIP.rw Enumeration .1.3.6.1.4.1.2467.1.9.3.1.6 |
apIpv4RipLocalMetricIf local routes are advertised by RIP, this is the metric to use when advertising the routes.rw INTEGER ( 1..15 ) .1.3.6.1.4.1.2467.1.9.3.1.7 |
apIpv4RipAdvRouteTableA list of routes that are advertised via all RIP interfaces. SEQUENCE OF ApIpv4RipAdvRouteEntry .1.3.6.1.4.1.2467.1.9.3.1.8 |
apIpv4RipAdvRouteEntryA single route to advertise via all RIP interfaces. ApIpv4RipAdvRouteEntry .1.3.6.1.4.1.2467.1.9.3.1.8.1 |
apIpv4RipAdvRoutePrefixThe route prefix to be advertised.ro IpAddress .1.3.6.1.4.1.2467.1.9.3.1.8.1.1 |
apIpv4RipAdvRoutePrefixLenThe network prefix length associated with this route.ro INTEGER .1.3.6.1.4.1.2467.1.9.3.1.8.1.2 |
apIpv4RipAdvRouteMetricThe metric to use when advertising this route.rw INTEGER .1.3.6.1.4.1.2467.1.9.3.1.8.1.3 |
apIpv4RipAdvRouteStatus(fill in later)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.3.1.8.1.4 |
apIpv4RipIfAdvRouteTableA list of routes that are advertised via a specific RIP interface. SEQUENCE OF ApIpv4RipIfAdvRouteEntry .1.3.6.1.4.1.2467.1.9.3.1.9 |
apIpv4RipIfAdvRouteEntryA single route to advertise via a specific RIP interface. ApIpv4RipIfAdvRouteEntry .1.3.6.1.4.1.2467.1.9.3.1.9.1 |
apIpv4RipIfAdvRouteAddressThe address of the RIP interface. If this is a valid unicast IP address, the interface is numbered. Otherwise, it indicates the ifIndex of an unnumbered interface.ro IpAddress .1.3.6.1.4.1.2467.1.9.3.1.9.1.1 |
apIpv4RipIfAdvRoutePrefixThe route prefix to be advertised.ro IpAddress .1.3.6.1.4.1.2467.1.9.3.1.9.1.2 |
apIpv4RipIfAdvRoutePrefixLenThe network prefix length associated with this route.ro INTEGER .1.3.6.1.4.1.2467.1.9.3.1.9.1.3 |
apIpv4RipIfAdvRouteMetricThe metric to use when advertising this route.rw INTEGER .1.3.6.1.4.1.2467.1.9.3.1.9.1.4 |
apIpv4RipIfAdvRouteStatus(fill in later)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.3.1.9.1.5 |
apIpv4RipIfTablePer-interface RIP information. SEQUENCE OF ApIpv4RipIfEntry .1.3.6.1.4.1.2467.1.9.3.1.10 |
apIpv4RipIfEntryInformation for a single RIP interface. ApIpv4RipIfEntry .1.3.6.1.4.1.2467.1.9.3.1.10.1 |
apIpv4RipIfAddressThe address of the RIP interface. If this is a valid unicast IP address, the interface is numbered. Otherwise, it indicates the ifIndex of an unnumbered interface.ro IpAddress .1.3.6.1.4.1.2467.1.9.3.1.10.1.1 |
apIpv4RipIfLogTxIf true, information will be written to the system log for each RIP packet transmitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.3.1.10.1.2 |
apIpv4RipIfLogRxIf true, information will be written to the system log for each RIP packet received.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.3.1.10.1.3 |
apIpv4RipEqualCostRoutesThe maximum number of equal-cost routes RIP can use.rw INTEGER ( 1..15 ) .1.3.6.1.4.1.2467.1.9.3.1.11 |
apIpv4RipRedistributeFirewallIf enabled, firewall routes will be advertised by RIP.rw Enumeration .1.3.6.1.4.1.2467.1.9.3.1.12 |
apIpv4RipFirewallMetricIf firewall routes are advertised by RIP, this is the metric to use when advertising the routes.rw INTEGER ( 1..15 ) .1.3.6.1.4.1.2467.1.9.3.1.13 |
More MIBs from ArrowPoint
Browse all ArrowPointMIBs →SNMP MIB module
SNMP MIB module
The APENT-MIB provides management definitions for ArrowPoint Communications enterprise devices, specifically monitoring session states, connection counts, and performance metrics for their application delivery controllers and load balancers. It enables the collection of operational data regarding active user sessions, server health, and traffic distribution statistics for network visibility and troubleshooting.
The AP64STATS-MIB module provides 64-bit statistical aggregation for RMON, MIB-II, and EtherErrors on Aruba (formerly ProCurve) network switches, enabling precise monitoring of high-volume traffic counters and interface error rates beyond standard 32-bit limitations.
The SVCEXT-MIB provides management access to the ArrowPoint Communications content services table, enabling monitoring of content switching states, server pool configurations, and traffic distribution metrics for legacy ArrowPoint Content Switch appliances.
The CHASSISMGREXT-MIB provides management access to ArrowPoint Communications chassis hardware, specifically enabling monitoring of High Speed Serial Interface (HSSI) module status and performance counters. This module facilitates the tracking of interface operational states, error statistics, and physical layer metrics for HSSI ports within the ArrowPoint enterprise environment.