IPV4-MIB
This MIB module describes the ArrowPoint enterprise MIB support for IPv4 Global Information
Main OID:
apIpv4Mib.1.3.6.1.4.1.2467.1.9.1.1
37
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
apIpv4RedundancyTrapThis trap is generated when the state of Redundancy changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2467.1.9.1.0.1 |
apIpv4MibThis MIB module describes the ArrowPoint enterprise MIB support for IPv4 Global Information MODULE-IDENTITY .1.3.6.1.4.1.2467.1.9.1.1 |
apIpv4SourceRouteIf enabled, IP packets with a source route option will be processed. If disabled, they are dropped.rw Enumeration .1.3.6.1.4.1.2467.1.9.1.2 |
apIpv4RecordRouteIf enabled, IP packets with a record route option will be processed. If disabled, they are dropped.rw Enumeration .1.3.6.1.4.1.2467.1.9.1.3 |
apIpv4SubnetBcastIf enabled, IP packets addressed to a broadcast address of a local subnet will be forwarded. If disabled, they are dropped.rw Enumeration .1.3.6.1.4.1.2467.1.9.1.4 |
apIpv4EcmpMethodDefines the algorithm to use when multiple equal-cost paths are available to the same destination. 'address' uses the IP addresses to assign a path. 'round' does a simple round-robin.rw Enumeration .1.3.6.1.4.1.2467.1.9.1.5 |
apIpv4OrphanTimerThe amount of time, in seconds, that a route will be kept after an SCM recovery. Default is 3 minutes.rw INTEGER .1.3.6.1.4.1.2467.1.9.1.6 |
apIpv4LogRouteChangesIf enabled, IP route changes will be displayed in the system log.rw Enumeration .1.3.6.1.4.1.2467.1.9.1.7 |
apIpv4ReachRoutesCurrent number of reachable routes.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.8 |
apIpv4ReachRoutesMemAmount of memory used to maintain reachable routes.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.9 |
apIpv4TotalRoutesCurrent number of routes maintainted, both reachable and unreachable.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.10 |
apIpv4TotalRoutesMemAmount of memory used to maintain all routes.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.11 |
apIpv4ReachHostsCurrent number of reachable host entries.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.12 |
apIpv4ReachHostsMemAmount of memory used to maintain reachable host entries.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.13 |
apIpv4TotalHostsCurrent number of host entries maintainted, both reachable and unreachable.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.14 |
apIpv4TotalHostsMemAmount of memory used to maintain all host entries.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.15 |
apIpv4PoolMemAmount of memory held in IP routing table pool.ro Gauge32 .1.3.6.1.4.1.2467.1.9.1.16 |
apIpv4B2BRedundancyIndicates whether box-to-box redundancy is configured on this box.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.1.17 |
apIpv4OpportunisticIndicates the operating mode for layer-3 opportunistic forwarding. In 'local' mode (the default), packets whose IP address equals a resolved node attached to a local subnet will be forwarded to that node regardless of the destination MAC address of the packet. In 'all' mode, packets whose IP address matches any reachable IP routing entry will be forwarded according to the routing entry regardless of the destination MAC address of the packet. In 'disable' mode, only packets whose destination MAC address equal this node's MAC address will be forwarded using an IP route entry.rw Enumeration .1.3.6.1.4.1.2467.1.9.1.18 |
apIpv4RedundancyStateThe current redundancy statero Enumeration .1.3.6.1.4.1.2467.1.9.1.19 |
apIpv4RedundancyIfThe IP address of the redundant linkro IpAddress .1.3.6.1.4.1.2467.1.9.1.20 |
apIpv4RedundancyMasterThe IP address of the redundant Masterro IpAddress .1.3.6.1.4.1.2467.1.9.1.21 |
apIpv4RedundancyMasterModeIndicates whether box-to-box redundancy is configured to always be the master.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.1.22 |
apIpv4EcmpStickyThis object specifies whether when making an ECMP decision on the return port, should the ingress port be the preferred path.rw Enumeration .1.3.6.1.4.1.2467.1.9.1.23 |
apIpv4ImplicitServiceThis object specifies whether when configuring a static route, if an implicit service should be started for the next hop address.rw Enumeration .1.3.6.1.4.1.2467.1.9.1.24 |
apIpv4RedundancyLinkFailTableThe IP redundancy Interface failure monitor table. SEQUENCE OF APIpv4RedundancyLinkFailEntry .1.3.6.1.4.1.2467.1.9.1.25 |
apIpv4RedundancyLinkFailEntryAn entry in the IP redundancy Interface failure monitor table. APIpv4RedundancyLinkFailEntry .1.3.6.1.4.1.2467.1.9.1.25.1 |
apIpv4RedundancyLinkFailIfIndexInterface Index used to uniquely identify ethernet interfacerw INTEGER .1.3.6.1.4.1.2467.1.9.1.25.1.1 |
apIpv4RedundancyLinkStatusMonitor this interface for physical link failure if truerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2467.1.9.1.25.1.2 |
apIpv4RedundancyFailReasonThe redundancy state change reasonro Enumeration .1.3.6.1.4.1.2467.1.9.1.26 |
apIpv4VrrpVRIDThis object tells virtual router ID in vrrp protocol.ro INTEGER .1.3.6.1.4.1.2467.1.9.1.27 |
apIpv4VrrpPriorityThis object tells virtual router priority in vrrp.ro INTEGER .1.3.6.1.4.1.2467.1.9.1.28 |
apIpv4numUplinkServicesThis object tells number of uplink services enabled.ro INTEGER .1.3.6.1.4.1.2467.1.9.1.29 |
apIpv4numViableUplinksThis object tells number of uplink services alive.ro INTEGER .1.3.6.1.4.1.2467.1.9.1.30 |
apIpv4numPhylinkMarkedThis object tells number of redundant-physical links monitored.ro INTEGER .1.3.6.1.4.1.2467.1.9.1.31 |
apIpv4toMasterStateCntThis object tells number of times the box become master.ro INTEGER .1.3.6.1.4.1.2467.1.9.1.32 |
apIpv4toBackupStateCntThis object tells number of times the box become backup.ro INTEGER .1.3.6.1.4.1.2467.1.9.1.33 |
More MIBs from ArrowPoint
Browse all ArrowPointMIBs →FLOWMGREXT-MIB
SNMP MIB module
289 objects→
CNTEXT-MIB
SNMP MIB module
86 objects→
APENT-MIB
The APENT-MIB provides management definitions for ArrowPoint Communications enterprise devices, specifically monitoring session states, connection counts, and performance metrics for their application delivery controllers and load balancers. It enables the collection of operational data regarding active user sessions, server health, and traffic distribution statistics for network visibility and troubleshooting.
80 objects→
AP64STATS-MIB
The AP64STATS-MIB module provides 64-bit statistical aggregation for RMON, MIB-II, and EtherErrors on Aruba (formerly ProCurve) network switches, enabling precise monitoring of high-volume traffic counters and interface error rates beyond standard 32-bit limitations.
63 objects→
SVCEXT-MIB
The SVCEXT-MIB provides management access to the ArrowPoint Communications content services table, enabling monitoring of content switching states, server pool configurations, and traffic distribution metrics for legacy ArrowPoint Content Switch appliances.
57 objects→
CHASSISMGREXT-MIB
The CHASSISMGREXT-MIB provides management access to ArrowPoint Communications chassis hardware, specifically enabling monitoring of High Speed Serial Interface (HSSI) module status and performance counters. This module facilitates the tracking of interface operational states, error statistics, and physical layer metrics for HSSI ports within the ArrowPoint enterprise environment.
51 objects→