IPT
Enterprise MIB for the InterWAN iPT product family.
Main OID:
iPT.interWAN.1
178
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
178 total| Object Name |
|---|
internet OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1 |
snmpV2 OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6 |
snmpModules OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6.3 |
snmpMIB OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6.3.1 |
snmpMIBObjects OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6.3.1.1 |
snmpTraps OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6.3.1.1.5 |
iPTEnterprise MIB for the InterWAN iPT
product family. MODULE-IDENTITY .interWAN.1 |
RFC1155-SMIEnterprise MIB for the InterWAN iPT
product family. Unknown .interWAN.1 |
iPTMgmt OBJECT IDENTIFIER .interWAN.1.1 |
provDataChgTrapThis trap will be sent whenever a successful NVS save
is complete. It will provide notification to the
Network Management tools that some data has been changed
so that they may refresh their data if desired. The
extra data provided in the parameters will help Network
Management determine who the trap belongs to in case a
change to the CPU IP address was including in the save. TRAP-TYPE .interWAN.1.1.0.40 |
ringTopoChangeTrapRing Topology Change Trap. This trap is sent
whenever there is a MAC address being added to
or removed from an OPE ring TRAP-TYPE .interWAN.1.1.0.50 |
nodeAvailableTrapThis trap is sent whenever a node on the IPT ring
becomes available from at least one WAN port of a local
node. The data provided in the trap indicates the MAC
address of the newly available node, the number of
hops from WAN port 1, and the number of hops from
WAN port 2. If either number of hops is equal to 0,
then the node is not available from that WAN port. TRAP-TYPE .interWAN.1.1.0.90 |
nodeUnAvailableTrapThis trap will be sent whenever a node on the IPT ring
is no longer available. The data provided in the trap
indicates the MAC address of the node which is no longer
available, and the number of LAN ports on that node. TRAP-TYPE .interWAN.1.1.0.100 |
provDataSaveFailedTrapThis trap will be sent whenever a NVS save operation
fails. It will provide notification to the Network
Management tools that provisioning changes that may
have been made since the last save or restart have not
been successfully saved. Unless a successful save is
performed any provisioning changes made will be lost
over a restart.
iPTSysResult provides whether save was successful/fail on
the local card, iPTSystemRemoteFileSynched provides
whether backup to SP failed. TRAP-TYPE .interWAN.1.1.0.110 |
provDataSaveRequiredTrapThis trap will be sent after any provisioning change. It will
provide notification to the Network Management tools that
some data has been changed and not saved to NVRam, so that
they may save it or alert the user about the change. The extra
data provided in the parameters will help Network Management
tool to determine who the trap belongs to. TRAP-TYPE .interWAN.1.1.0.180 |
provDataLostTrapThis trap will be sent after there was a provisioning change,
which was not saved and either cold or warm restart occured.
In this case the unsaved provisioning data was lost. It will
provide notification to the Network Management tools that some
data was lost.The extra data provided in the parameters will
help Network Management tool to determine who the trap belongs to. TRAP-TYPE .interWAN.1.1.0.190 |
ringSizeExceededTrapThis trap is sent whenever there is the MAC address being
added to the OPE ring and the maximum number of OPE nodes
on the ring exceeded the supported number. If the number
of OPE nodes was already over the limit no new trap is sent TRAP-TYPE .interWAN.1.1.0.200 |
ringSizeExceededClearTrapThis trap is sent whenever there is the MAC address being
removed from an OPE ring and the maximum number of OPE nodes
on the ring was greater then the supported number the number
of OPE nodes on the ring decreased from exceeded
to supported number. TRAP-TYPE .interWAN.1.1.0.210 |
iPTSystem OBJECT IDENTIFIER .interWAN.1.1.1 |
iPTSysIpAddrThis entity's IP address.ro IpAddress .interWAN.1.1.1.1 |
iPTSysNetMaskThis entity's subnet mask.ro IpAddress .interWAN.1.1.1.2 |
iPTSysBroadcastThis entity's broadcast address.ro IpAddress .interWAN.1.1.1.3 |
iPTSysAddressThis address serves two purposes. One, it's used
as the Ethernet MAC address to communicate to the
entity's IP stack over an inband channel. Two, it's
re-used in the iPT overhead as the identity of
this iPT node on the ring.ro MacAddress (SNMPv2-TC) .interWAN.1.1.1.4 |
iPTSysDefaultGatewayThis entity's default gateway.ro IpAddress .interWAN.1.1.1.5 |
iPTSysCommReadWriteAllWhen an SNMP message is received by this entity, the
community string in the message is compared with this
string first. If it matches, read-write access is
granted to all items in the MIB. If it doesn't
match, the iPTSysCommReadWrite string is compared next.rw DisplayString .interWAN.1.1.1.6 |
iPTSysCommReadWriteWhen an SNMP message is received by this entity, the
community string in the message is compared with this
string second. If it matches, read-write access is
granted to all items in the MIB except community
strings. (Community strings appear empty when read
and return a no such name error when an attempt is
made to write them.) If it doesn't match, the
iPTSysCommReadOnly string is compared next.rw DisplayString .interWAN.1.1.1.7 |
iPTSysCommReadOnlyWhen an SNMP message is received by this entity, the
community string in the message is compared with this
string third. If it matches, read-only access is
granted to all items in the MIB except community
strings. (Community strings appear empty when read.)
If it doesn't match, no access is granted, no
response is sent back to the SNMP requester, and
SNMP traps are sent to the SNMP trap receiver(s) if
configured.rw DisplayString .interWAN.1.1.1.8 |
iPTSysVersionSoftware version running on devicero DisplayString (SNMPv2-TC) .interWAN.1.1.1.9 |
iPTSysActionInitiate a system action. i.e. softReset(2),
saveToNVRAM(3), resetCounters(4)rw Enumeration .interWAN.1.1.1.10 |
iPTSysResultResult from the last system action.ro Enumeration .interWAN.1.1.1.11 |
iPTSysLastChangeLast management initiated configuration
change since sysUpTime.ro TimeTicks (SNMPv2-SMI) .interWAN.1.1.1.12 |
iPTSysLastStatisticsResetLast management initiated statistics reset
since sysUpTime.ro TimeTicks (SNMPv2-SMI) .interWAN.1.1.1.13 |
iPTSysNVRamSizeTotal Non-volatile RAM in bytesro Gauge32 .interWAN.1.1.1.14 |
iPTSysNVRamUsedNon-volatile RAM in use in bytesro Gauge32 .interWAN.1.1.1.15 |
iPTSysLastSaveToNVRamSysUpTime of the last time when NVRAM was
written to.ro TimeTicks (SNMPv2-SMI) .interWAN.1.1.1.16 |
iPTSysRemoteFileSynchedSynchronization status of the local and
remote provisioning file store.ro Enumeration .interWAN.1.1.1.17 |
iPTSysSNMPEnabledIndicates whether SNMP is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.1.18 |
iPTSysTelnetServerEnabledIndicates whether Telnet Server is
enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.1.19 |
iPTSysTrapRecvTableThe trap receiver table (0 to 25 entries). This
table lists the addresses of Network Management
Stations that should receive trap messages from
this entity when an exception condition occurs. SEQUENCE OF IPTSysTrapRecvEntry .interWAN.1.1.1.20 |
iPTSysTrapRecvEntryA trap receiver table entry. IPTSysTrapRecvEntry .interWAN.1.1.1.20.1 |
iPTSysTrapRecvAddressIP address for trap receiver.ro IpAddress .interWAN.1.1.1.20.1.1 |
iPTSysTrapRecvVersionThe SNMP version of the trap receiver. It
affects how the trap message is formatted.rw Enumeration .interWAN.1.1.1.20.1.2 |
iPTSysTrapRecvCommunityCommunity string used for trap messages to this
trap receiver.rw DisplayString .interWAN.1.1.1.20.1.3 |
iPTSysTrapRecvRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .interWAN.1.1.1.20.1.4 |
iPTSysFDBAgingTimeFiltering database aging time expressed in
seconds. This entry indicates the amount of time it
takes for the entries in the iPT filtering database to
age out. A value of 0 (zero) disables aging.rw INTEGER (0 | 30..600) .interWAN.1.1.1.21 |
iPTSwitchingUnknownPktDiscardsThis counter provides the number of packets discarded in
switching fabric due to Unknown Packet.ro Counter32 .interWAN.1.1.1.22 |
iPTSwitchingCorruptedPktDiscardsThis counter provides the number of packets discarded in
switching fabric due to Corrupted Packet. (i.e.bad CRC,
underrun)ro Counter32 .interWAN.1.1.1.23 |
iPTSwitchingQueueFullDiscardsThis counter provides the number of frames discarded in
switching fabric due to lack of resources. (i.e queue
full)ro Counter32 .interWAN.1.1.1.24 |
iPTSysNENameThe SONET Network Element Name to which this entity
belongs.ro DisplayString .interWAN.1.1.1.25 |
iPTSysSlotThe slot number in which this entity residesro INTEGER .interWAN.1.1.1.26 |
iPTSysProdTypeThe Platform type(i.e.Express, OC-48), and the
Shelf type(MX, HX, GX) for Express and the OC-48
types.ro DisplayString .interWAN.1.1.1.27 |
iPTSysCardTypeIndicates specific characteristics of the hardware
in the format
<platform>_<cardtype>_<epiftype>_<boardrel>.
platform: CX = Cricket
MX = Medium Density
HX = High Density
GX = Giga bit
EXP = CX/MX/HX/GX
OC48 = OC48 Classic
cardtype: iPT100 = 10/100 BT board
100FX = 100 FX card
GIGE = Gigabit iPT
epiftype: EPIF50 = MMC Epif 50 Asic
EPIF200 = MMC Epif 200 Asic
XPIF = MMC Xpif board.
boardrel: 1W1
OD1
OD2ro Enumeration .interWAN.1.1.1.28 |
iPTSysCardPECPEC code of the iPT hardware cardro DisplayString (SNMPv2-TC) .interWAN.1.1.1.29 |
iPTSysARPMaxRetriesThe maximum number of ARP retries. This value
determines the number of times an ARP message will
be sent when the destination fails to respond.rw INTEGER .interWAN.1.1.1.30 |
iPTSysIGMPRobustnessValueThe IGMP robustness value defines how many
Membership reports are sent when a new multicast
address is added.rw INTEGER .interWAN.1.1.1.31 |
iPTSysIGMPUnsolicitedReportIntThe Unsolicited Report Interval is the time
between repetitions (robustness variable) of
a host's initial report of its multicast group
addresses. The interval is measured in tenths
of a second.rw INTEGER .interWAN.1.1.1.32 |
iPTSysModeThe mode of the CPU port. This determines
whether the CPU is running the TLS/L2
protocol or the OE/L2 protocol.rw Enumeration .interWAN.1.1.1.33 |
iPTSysSubnettingEnabledProvisioning rules regarding UNI port subnetting
are to be enabled or disabled.rw Enumeration .interWAN.1.1.1.34 |
iPTSysProvDataStatusProvisioning data status:
default(1) - the default provisioning data,
saved (2) - the current provisioning data
is saved in the NVRam,
saveReq (3) - there is/are the
provisioning change(s) not saved in the NVRam,
dataLost (4) - the provisioning data was lost
due to the restart.ro Enumeration .interWAN.1.1.1.35 |
iPTCli OBJECT IDENTIFIER .interWAN.1.1.2 |
iPTCliRWAUserNameUser name for the read-write-all CLI account.rw DisplayString .interWAN.1.1.2.1 |
iPTCliRWAPasswordPassword for the read-write-all CLI account.rw DisplayString .interWAN.1.1.2.2 |
iPTCliRWUserNameUser name for the read-write CLI account.rw DisplayString .interWAN.1.1.2.3 |
iPTCliRWPasswordPassword for the read-write CLI account.rw DisplayString .interWAN.1.1.2.4 |
iPTCliROUserNameUser name for the read-only CLI account.rw DisplayString .interWAN.1.1.2.5 |
iPTCliROPasswordPassword for the read-only CLI account.rw DisplayString .interWAN.1.1.2.6 |
iPTCliMaxTelnetSessionsUsed to indicate the maximum number of telnet
sessions the system will support.ro INTEGER .interWAN.1.1.2.7 |
iPTCliTimeoutUsed to indicate the amount of idle time, in
seconds to wait before timing out telnet and
rlogin sessions.rw INTEGER .interWAN.1.1.2.8 |
iPTCliNumAccessViolationsUsed to indicate the number of CLI access
violations detected by the system.ro Counter32 .interWAN.1.1.2.9 |
iPTPort OBJECT IDENTIFIER .interWAN.1.1.3 |
iPTPortNumberThe total number of ports on this node. This includes
the LAN ports, the WAN ports and the processor portro INTEGER .interWAN.1.1.3.1 |
iPTPortTableTable containing information on every port on the node SEQUENCE OF IPTPortEntry .interWAN.1.1.3.2 |
iPTPortEntryAn iPT port table entry IPTPortEntry .interWAN.1.1.3.2.1 |
iPTPortIndexA unique index used to identify a particular
port in the system. This index is equal to the
ifIndex in MIB2ro INTEGER .interWAN.1.1.3.2.1.1 |
iPTPortTypeThe specific type of portro Enumeration .interWAN.1.1.3.2.1.2 |
iPTPortEnableThe administrative state of this portrw Enumeration .interWAN.1.1.3.2.1.3 |
iPTPortOperStateThe state of the port. This attribute
refines the MIB-II value to provide more
detail for LAN ports. WAN ports do not
support the learning state. rxDown and txDown
are only appliable to WAN ports.
start: First state after card reset prior
to microcode download.
init: Microcode downloaded and running,
waiting for full provisioning to
proceed.
down: All provisioning received, waiting
for link pulse.
forwarding: Port is fully operational.
learning: Port is learning local MAC addresses;
no packets are forwarded to or
received from WAN.
rxDown: Port is not receiving any signal.
txDown: Port is not transmitting any signal.
testing: Port is processing tests packets on
that port as well as packets destined
for other ports.ro Enumeration .interWAN.1.1.3.2.1.4 |
iPTPortAutoNegotiateIndicate whether this port enabled for auto
negotiations or not.rw TruthValue (SNMPv2-TC) .interWAN.1.1.3.2.1.5 |
iPTPortAdminDuplexIndicates the port duplex typerw Enumeration .interWAN.1.1.3.2.1.6 |
iPTPortOperDuplexIndicate this port's current duplex value.ro Enumeration .interWAN.1.1.3.2.1.7 |
iPTPortAdminSpeedIndicate this port's speed.rw Enumeration .interWAN.1.1.3.2.1.8 |
iPTPortOperSpeedIndicate this port's current speed value.ro INTEGER .interWAN.1.1.3.2.1.9 |
iPTPortAutoNegotiationSupportedIndicate whether this port can support
auto-negotiation.ro TruthValue (SNMPv2-TC) .interWAN.1.1.3.2.1.10 |
iPTPortDefaultPriorityThe 802.1P priority to be assigned to incident
frames having no such priority of their own.rw INTEGER .interWAN.1.1.3.2.1.11 |
iPTPortUnknownTDDiscardsThe number of times frames have been filtered by
this port because their encoded VLAN wasn't in the
set of VLANs this port was configured to accept.
This attribute only applies to mapped ports.ro Counter32 .interWAN.1.1.3.2.1.12 |
iPTPortPauseFrameEnabledIndicate whether this port is enabled for pause
frame control (as per IEEE 802.3x) or not.rw TruthValue (SNMPv2-TC) .interWAN.1.1.3.2.1.13 |
iPTPortNameUser configurable value identifiying the physical
port.rw DisplayString .interWAN.1.1.3.2.1.14 |
iPTWanInBIP8ErrorsThis counter provides the number of Frames received
with BIP-8 error at the WAN egress (out of the Ring).ro Counter32 .interWAN.1.1.3.2.1.15 |
iPTWanInTTLInvalidThis counter provides the number of Frames received
with an invalid Time To Live value at the WAN egress
(out of the Ring).ro Counter32 .interWAN.1.1.3.2.1.16 |
iPTWanOutCRCerrorsThis counter provides the number of Frames transmitted
with CRC error at the WAN ingress (into the Ring).ro Counter32 .interWAN.1.1.3.2.1.17 |
iPTWanInRADDiscardsThis counter is only applicable to Express platform
and it provides the number of Frames that got discarded
with in the RAD (at the RAM to be precise) at the
egress side (out of the Ring) due to an error (ex:
memory overflow).ro Counter32 .interWAN.1.1.3.2.1.18 |
iPTWanPassThroughFramesThis counter provides the number of passthrough frames
that have passed through this WAN port.ro Counter32 .interWAN.1.1.3.2.1.19 |
iPTWanUnknownTypeOrPortThis counter provides the number of frames that got
discarded at this WAN port due to an invalid packet
type or an invalid port number.ro Counter32 .interWAN.1.1.3.2.1.20 |
iPTWanTDIFailedPacketsThis counter provides the number of frames that got
discarded due to an invalid TDI. If a WAN port
receives a frame with a TDI on which the receiving
WAN port is not a member of (WAN ports have all the
TDIs (TDIs of the CPU and all four LAN ports) get
automatically provisioned in them.) then the frame
is discarded and this counter is incremented.ro Counter32 .interWAN.1.1.3.2.1.21 |
iPTWanDiscardsForOtherReasonsThis counter provides the number of frames that got
discarded at the WAN for a reason other than the
errors described above. An example is when a WAN port
is in the BLOCKING state. While in the blocking state,
any packets received from the LAN side will be
discarded by the WAN.ro Counter32 .interWAN.1.1.3.2.1.22 |
iPTLanEgressPacketsThis counter is only applicable to OC-48 platform
and it provides the number of Frames that got discarded
on egress (out from the ring) going to the LAN (ex:
memory overflow).ro Counter32 .interWAN.1.1.3.2.1.23 |
iPTLanUnderSizeFrameThis counter provides the number of discarded Frames
on Lan ingress that are smaller than the minimum
permitted frame size.ro Counter32 .interWAN.1.1.3.2.1.24 |
iPTLanOverrunFrameThis counter provides the number of discarded Frames
on Lan ingress that are overrun.ro Counter32 .interWAN.1.1.3.2.1.25 |
iPTPortSourceLearningIndicate whether this port is enabled for source
learning or not.rw TruthValue (SNMPv2-TC) .interWAN.1.1.3.2.1.26 |
iPTNode OBJECT IDENTIFIER .interWAN.1.1.4 |
iPTNodeNumberThe number of entries currently in the node
table regardless of their statero INTEGER .interWAN.1.1.4.1 |
iPTNodeTableThe node address table lists the current iPT
routing table for this entity. SEQUENCE OF IPTNodeEntry .interWAN.1.1.4.2 |
iPTNodeEntryA iPT Node database entry IPTNodeEntry .interWAN.1.1.4.2.1 |
iPTNodeAddressThe iPT Node address referred to by this entryro MacAddress (SNMPv2-TC) .interWAN.1.1.4.2.1.1 |
iPTNodeHops-WAN2The number of hops beween this node and the
local node around the iPT ring through WAN port
2ro INTEGER .interWAN.1.1.4.2.1.2 |
iPTNodeHops-WAN1The number of hops beween this node and the
local node around the iPT ring through WAN port
1ro INTEGER .interWAN.1.1.4.2.1.3 |
iPTNodePrimaryRouteThe preferred ring direction to route a iPT packet
towards this destination. If the optimal route
becomes unavailable, the direction will be set to
none.ro Enumeration .interWAN.1.1.4.2.1.4 |
iPTNodeSecondaryRouteThe backup ring direction to route a iPT packet
towards this destination. If the primary route
becomes unavailable, this direction will be
immediately chosen to route packets. If no
secondary route exists, this will be set to none.ro Enumeration .interWAN.1.1.4.2.1.5 |
iPTNodeIPAddressThe iPT Node IP address referred to by this entryro IpAddress .interWAN.1.1.4.2.1.6 |
iPTNodeIPAddrAvailIndicate whether the iPTNodeIPAddress was truly
received from the far end or if it was unavailable.ro TruthValue (SNMPv2-TC) .interWAN.1.1.4.2.1.7 |
iPTNodeRemotePort-WAN2The Port number to which this node is directly or
indirectly connected to when it goes via its WAN2
Port (2/2).ro Enumeration .interWAN.1.1.4.2.1.8 |
iPTNodeRemotePort-WAN1The Port number to which this node is directly or
indirectly connected to when it goes via its WAN1
Port (2/1).ro Enumeration .interWAN.1.1.4.2.1.9 |
iPTNodeNumberPortsThe number of ports on this nodero INTEGER .interWAN.1.1.4.2.1.10 |
iPTNodeSysNameThe first 40 characters of the SysName associated
with iPTNodeIPAddress.ro DisplayString .interWAN.1.1.4.2.1.11 |
iPTNodeInAnybody-WAN2The total number of Anybody WAN port 2 messages
received from all nodesro Counter32 .interWAN.1.1.4.3 |
iPTNodeInAnybody-WAN1The total number of Anybody WAN port 1 messages
received from all nodesro Counter32 .interWAN.1.1.4.4 |
iPTNodeOutAnybody-WAN2The total number of Anybody WAN port 2 messages
generated by this nodero Counter32 .interWAN.1.1.4.5 |
iPTNodeOutAnybody-WAN1The total number of Anybody WAN port 1 messages
generated by this nodero Counter32 .interWAN.1.1.4.6 |
iPTNodeAnybodyCollisionsThe number of Anybody collisions detected
by this nodero Counter32 .interWAN.1.1.4.7 |
iPTNodeInLinkDownThe number of LINK DOWN messages this node has
receivedro Counter32 .interWAN.1.1.4.8 |
iPTNodeOutLinkDownThe number of LINK DOWN messages this node has
generatedro Counter32 .interWAN.1.1.4.9 |
iPTNodeDiscCompletedThe number of Node Discovery processes completedro Counter32 .interWAN.1.1.4.10 |
iPTBucket OBJECT IDENTIFIER .interWAN.1.1.5 |
iPTBucketTableTable containing token bucket information per port SEQUENCE OF IPTBucketEntry .interWAN.1.1.5.1 |
iPTBucketEntryList of information maintained by every port
regarding token buckets for that port IPTBucketEntry .interWAN.1.1.5.1.1 |
iPTBucketIndexThe port number for which this entry contains token
bucket information. Equal to the interface index
that this port corresponds toro INTEGER .interWAN.1.1.5.1.1.1 |
iPTBucketSizeThe maximum allowable burst duration expressed in
milliseconds. The token bucket mechanism always
permits traffic bursts at line rate. This parameter
allows the duration of this burst to be controlled.rw INTEGER .interWAN.1.1.5.1.1.2 |
iPTBucketRateSteady state data rate of this port expressible in
Megabits per second.rw INTEGER .interWAN.1.1.5.1.1.3 |
iPTBucketCurrentCurrent number of tokens in the bucket, expressed in
Megabytesro INTEGER .interWAN.1.1.5.1.1.4 |
iPTBucketEnabledIndicate whether this token bucket is enabled or not.rw TruthValue (SNMPv2-TC) .interWAN.1.1.5.1.1.5 |
iPTBucketDiscardsNumber of packets discarded due to a lack of tokens.
If this counter is increasing, the device connected
to this port is sending data in excess of the provisioned
rate.ro Counter32 .interWAN.1.1.5.1.1.6 |
iPTPauseFramesTransmittedThis counter provides the number of pause frames
transmitted.ro Counter32 .interWAN.1.1.5.1.1.7 |
iPTWanTrafficMgmt OBJECT IDENTIFIER .interWAN.1.1.6 |
iPTLoadSharing OBJECT IDENTIFIER .interWAN.1.1.6.1 |
iPTGeneralLoadSharing OBJECT IDENTIFIER .interWAN.1.1.6.1.1 |
iPTGeneralLoadSharingTableTable containing port enable/disable SEQUENCE OF IPTGeneralLoadSharingEntry .interWAN.1.1.6.1.1.1 |
iPTGeneralLoadSharingEntryAn entry representing the static route IPTGeneralLoadSharingEntry .interWAN.1.1.6.1.1.1.1 |
iPTGeneralLoadSharingPortIndexUsed to add/delete entries to the tablerw INTEGER .interWAN.1.1.6.1.1.1.1.1 |
iPTGeneralLoadSharingEnableThe administrative state of the Wan Traffic Management
Load Sharing General Load Sharing Featurerw TruthValue (SNMPv2-TC) .interWAN.1.1.6.1.1.1.1.2 |
iPTStaticRouting OBJECT IDENTIFIER .interWAN.1.1.6.2 |
iPTDestinationStaticRouting OBJECT IDENTIFIER .interWAN.1.1.6.2.1 |
iPTDestinationStaticRoutingEnabledThe administrative state of Static Destination Routingrw TruthValue (SNMPv2-TC) .interWAN.1.1.6.2.1.1 |
iPTDestinationStaticRoutingTableTable containing information about configured
static routes SEQUENCE OF IPTDestinationStaticRouteEntry .interWAN.1.1.6.2.1.2 |
iPTDestinationStaticRouteEntryAn entry representing the static route IPTDestinationStaticRouteEntry .interWAN.1.1.6.2.1.2.1 |
iPTDestinationNodeSpecifies the destination node, significant to
the local ring. It is the CPU IP address of the
destination node.rw IpAddress .interWAN.1.1.6.2.1.2.1.1 |
iPTDestinationPrefRouteSpecifies the preferred route for the given
destination node.rw Enumeration .interWAN.1.1.6.2.1.2.1.2 |
iPTDestinationPrefRouteStatusSpecifies if the preferred route is reachable
(active) or not (inactive) at the current time.ro Enumeration .interWAN.1.1.6.2.1.2.1.3 |
iPTStaticRouteEntryStatusSpecifies if the static route entry is active or
not.
Active: Given IP address as destination node is found on the ring.
Inactive: Given IP address as destination node is not found on the ring,
therefore this entry is ignored.ro Enumeration .interWAN.1.1.6.2.1.2.1.4 |
iPTStaticRouteRowStatusUsed to add/delete entries to the tablerw RowStatus (SNMPv2-TC) .interWAN.1.1.6.2.1.2.1.5 |
iPTRingFairness OBJECT IDENTIFIER .interWAN.1.1.6.3 |
iPTRingFairnessTableTable containing ring fairness information per WAN port SEQUENCE OF IPTRingFairnessEntry .interWAN.1.1.6.3.1 |
iPTRingFairnessEntryList of information maintained by every WAN port
regarding ring fairness data for that port. IPTRingFairnessEntry .interWAN.1.1.6.3.1.1 |
iPTRingFairnessIndexThe port number for which this entry contains ring
fairness information. Equal to the WAN SNMP index
that this port corresponds to.ro INTEGER .interWAN.1.1.6.3.1.1.1 |
iPTRingFairnessReservedRateThe WAN bandwidth in (Mbit/s) which downstream
nodes attempt to reserve for this port.rw INTEGER .interWAN.1.1.6.3.1.1.2 |
iPTRingFairnessBwReservedThe amount of WAN bandwidth (in kilobytes) that
has been successfully reserved by ring fairness on
this port for downstream passthrough nodes (Note
that this is a running Kbyte count, not a rate).ro Counter32 .interWAN.1.1.6.3.1.1.3 |
iPTRingFairnessBwNotReservedThe amount of bandwidth (in kilobytes) that could
NOT successfully be reserved by ring fairness on
this port for downstream passthrough nodes. A large
number here indicates that the current reserved rate
(iPTRingFairnessReservedRate) is set too high for
your ring size and traffic patterns. Consult the ring
fairness engineering formulas in order to set the
reserved rate properly.ro Counter32 .interWAN.1.1.6.3.1.1.4 |
iPTRingFairnessModeThe mode which governs how ring fairness will
operate on this port.
In off mode, ring fairness will not ibe active,
there is a very small reserved bandwidth for the
node so that it will not be totally starved, there
is no max rate enforced in this mode.
In reserved mode, ring fairness will permit a port
to exceed its fair-share rate of bandwidth, but at
the same time will forcibly try to reserve enough
bandwidth for each downstream passthrough node to
still have access to THEIR port's provisioned
reserved-rate.rw Enumeration .interWAN.1.1.6.3.1.1.5 |
iPTTrapConfig OBJECT IDENTIFIER .interWAN.1.1.7 |
iPTTrapConfigRingTopoChgEnabledIndicates whether the Ring Topology
Change trap is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.1 |
iPTTrapConfigDataProvChgEnabledIndicates whether the Provisioning
Data Change trap is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.2 |
iPTTrapNodeAvailableEnabledIndicates whether the Node Available
trap is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.3 |
iPTTrapNodeUnavailableEnabledIndicates whether the Node Unavailable
trap is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.4 |
iPTTrapNvsSaveFailEnabledIndicates whether the Nvs Save Fail
trap is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.5 |
iPTTrapProvDataSaveRequiredEnabledIndicates whether the Provisioning Data
Save Required trap is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.6 |
iPTTrapProvDataLostEnabledIndicates whether the Provisioning Data
Lost trap is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.7 |
iPTTrapRingSizeExceededEnabledIndicates whether the Ring Size Exceeded trap
is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.8 |
iPTTrapRingSizeExceededClearEnabledIndicates whether the Ring Size Exceeded Clear
trap is enabled or disabled.rw TruthValue (SNMPv2-TC) .interWAN.1.1.7.9 |
iPTTest OBJECT IDENTIFIER .interWAN.1.1.8 |
iPTTestLoopbackTableThis table holds the type of test to be
initiated as well as the Index of the port
on which the test is run SEQUENCE OF IPTTestLoopbackEntry .interWAN.1.1.8.1 |
iPTTestLoopbackEntryVariables used to define the test IPTTestLoopbackEntry .interWAN.1.1.8.1.1 |
iPTTestLoopbackPortIndexThe index value uniquely identifies the
interface (port) to which this entry is
applicable.It is the same as PortIndex
from the SysPortGrpro INTEGER .interWAN.1.1.8.1.1.1 |
iPTTestLoopbackActionThis object specifies which type of test is
being performedrw Enumeration .interWAN.1.1.8.1.1.2 |
iPTTestLoopbackPassCountThe number of iterations of the test case
that completed successfullyro INTEGER .interWAN.1.1.8.1.1.3 |
iPTTestLoopbackFailCountThe number of iterations of the test case
that completed unsuccessfullyro INTEGER .interWAN.1.1.8.1.1.4 |
iPTTestLoopbackTestResultThe Result of the testro Enumeration .interWAN.1.1.8.1.1.5 |
iPTExpress OBJECT IDENTIFIER .interWAN.1.2 |
iPT48 OBJECT IDENTIFIER .interWAN.1.3 |
iPTHCT OBJECT IDENTIFIER .interWAN.1.4 |