IPPM-CONTROL-MIB
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, It defines a set of NOTIFICATION-TYPE used to control IPPM metrics measures, pushing alarms and reporting the measures results.
Main OID:
ippmControlMib.1.3.6.1.3.10001
3
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
3 total| Object Name |
|---|
ippmControlMibThis memo defines a portion of the Management Information Base
(MIB) for use with network management protocols in TCP/IP-based
internets. In particular, It defines a set of NOTIFICATION-TYPE used
to control IPPM metrics measures, pushing alarms and reporting the
measures results. MODULE-IDENTITY .1.3.6.1.3.10001 |
ippmMulticastInstantaneousMeasureSetupThe definition of the setup of an instantaneous multicast
measure is sent by the broadcasting application or the probe in
the multicast channel using a SNMP trap defined in this
NOTIFICATION-TYPE.
On reception of the ippmMulticastInstantaneousMeasureSetup
setup the receiver or the router:
+ timestamp the arrival time of the setup;
+ considers the following defaults values;
+ prepare the ippmMulticastInstantaneousMeasureReport
notification;
+ send the report using a SNMP Inform PDU.
Defaults values:
IppmMeasureEntry default values:
ippmMeasureName:
ippmMulticastInstantaneousMeasure;
ippmMeasureMetrics: {
Type-P-One-way-Delay,
Type-P-One-way-Packet-Loss,
Type-P-Multicast-Instantaneous-Connectivity, (*)
Type-P-spatial-hop-one-way-delay (*)
}
ippmMeasureBeginTime: 0
ippmMeasureClockPeriodUnit: 0
ippmMeasureClockPeriod: 0
ippmMeasureDurationUnit: 0
ippmMeasureDuration: 0
ippmMeasureHystorySize: 0
ippmMeasureStorageType: other
ippmMeasureStatus: createAndGo
IppmNetworkMeasureEntry default values:
IppmNetworkMeasureClockPattern: 0
IppmNetworkMeasureTimeoutDelay: 0
ippmNetworkMeasureL3PacketSize: 0
ippmNetworkMeasureDataPattern: 0
IppmippmReportSetupEntry default values:
IppmReportSetupDefinition: {
onSingleton,
inInformRequestPDU,
clearHistory
}
ippmReportSetupMetricThreshold: 0
ippmReportSetupEventsDurationThreshold: 0
(*) only considered by routers. NOTIFICATION-TYPE .1.3.6.1.3.10001.1 |
ippmMulticastInstantaneousMeasureReportThis NOTIFICATION-TYPE is used by the receiver or the
router to push the result of the measure performed
according the ippmMulticastInstantaneousMeasureSetup
setup.
(*) is only applicable for router.
{ comment:
This report definition has to be split to get one for
receiver and one for router.}
Note:
An ippmHistoryValue is indexed using the owner, the
owner index, the metric index and the timestamp (e.g.:
acme.1.6.0106150820100100). So the metric index
identifies which metric result (One-way-Delay, Packet-
Loss, Connectivity) the ippmHistoryValue carries. NOTIFICATION-TYPE .1.3.6.1.3.10001.2 |