IP-MAC-BIND-MIB
AI MIB Summary
The IP-MAC-BIND-MIB module facilitates the monitoring and management of static or dynamic IP-to-MAC address binding tables on proprietary enterprise network devices, specifically tracking the association between Layer 3 IP addresses and Layer 2 MAC addresses to enforce access control policies and detect address spoofing.
The structure of IP-MAC binding management for the proprietary enterprise.
Main OID:
swIpMacBindMIB.dlink-common-mgmt.23
113
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
swIpMacBindMIBThe structure of IP-MAC binding management for the
proprietary enterprise. MODULE-IDENTITY .dlink-common-mgmt.23 |
swIpMacBindingCtrl OBJECT IDENTIFIER .dlink-common-mgmt.23.1 |
swIpMacBindingTrapLogStateWhen enabled (2), whenever there is a new MAC that violates the pre-defined
IP MAC Binding configuration, a trap will be sent out and the relevant information
will be logged into the system.rw Enumeration .dlink-common-mgmt.23.1.1 |
swIpMacBindingACLModeWhen enabled (2), the IP-MAC Binding function will use the ACL mode.
Note: Supported in IP-MAC binding v3.3 only.rw Enumeration .dlink-common-mgmt.23.1.2 |
swIpMacBindingRecoveryIntervalSpecifies the seconds in which the switch will delete the blocked
ARL (Address Resolution Logic) entry in order to relearn the entry.
This is a mechanism by which the switch can recover an ARL entry
from the blocked state to the normal state.
A value of '0' means an infinite state.
Note: This object is specific to models that are unable to recover
a blocked MAC address without removing the blocked ARL entry
and relearning the entry.rw INTEGER .dlink-common-mgmt.23.1.3 |
swIpMacBindingDHCPSnoopStateWhen the dhcp_snoop function is enabled, all address_binding
disabled ports will act as DHCP server ports (the switch will
learn IP addresses through DHCP server ports (by DHCP OFFER
and DHCP ACK packets)).
The auto-learned IP-MAC binding entry will be mapped to a specific
source port based on the MAC address learning function. This entry
will be created as an ACL-mode binding entry for this specific port.
Each entry is associated with a lease time. When the lease time
expires, the expired entry will be removed from this port. The
automatically learned binding entry can be moved from one port to
another port if the DHCP snooping function has learned that the MAC
address has moved to a different port.
Consider a case where DHCP snooping learns a binding entry, and the
same IP-MAC binding entry has been statically configured. Suppose
that the learned information is consistent with the statically
configured entry, then the automatically learned entry will not be
created. Supposing that the entry has been statically configured in ARP
mode, since the automatically learned entry will be created in ACL
mode, the entry will become an ACL mode entry. Supposing that the entry is
statically configured on one port and the entry is automatically
learned on another port, then both entries will exist.
When the dhcp_snoop function is disabled, all of the automatically
learned binding entries will be removed.rw Enumeration .dlink-common-mgmt.23.1.4 |
swIpMacBindingDHCPSnoopEntryClearAllStateUsed to clear all the entries created by DHCP packets.rw Enumeration .dlink-common-mgmt.23.1.5 |
swIpMacBindingARPInspectionStateUsed to set the ARP inspection state.rw Enumeration .dlink-common-mgmt.23.1.6 |
swIpMacBindingIPv6DHCPSnoopStateThis object indicates the global state of IPv6 DHCP snooping.rw Enumeration .dlink-common-mgmt.23.1.7 |
swIpMacBindingNDSnoopStateThis object indicates the global state of ND snooping.rw Enumeration .dlink-common-mgmt.23.1.8 |
swIpMacBindingIPv6DHCPSnoopEntryClearAllStateUsed to clear all the entries learned by IPv6 DHCP snooping.rw Enumeration .dlink-common-mgmt.23.1.9 |
swIpMacBindingNDSnoopEntryClearAllStateUsed to clear all the entries learned by ND snooping.rw Enumeration .dlink-common-mgmt.23.1.10 |
swIpMacBindingRoamingStateThis object indicates the global state of IMPB roaming.
When IMPB roaming is enabled, the dynamic authenticated MAC address
which learned through DHCP/ND snooping on specific port can change to
another port if it detects (1) a new DHCP process belong to same IP
and MAC address or (2) a new DAD process belong to same IP and MAC.
When disable the IMPB roaming, the DHCP or ND entry cannot be roamingrw Enumeration .dlink-common-mgmt.23.1.11 |
swIpMacBindingAutosaveStateThis object indicates the global state of the DHCPv4 Snooping binding entries autosave.
By default, the autosave state of the DHCPv4 Snooping binding entries is enabled.
When the autosave state is enabled, the device will back up the DHCPv4 Snooping binding
entries in the specified backup path every 60 minutes and read the back up database after
the switch reboot.The DHCP Snooping will rebuild the binding entry base on the back up database file.
You must not change the back up database file, otherwise it will lead to rebuild failed.
Note This feature only supports on the device that supports of external memory (e.g. SD card)rw Enumeration .dlink-common-mgmt.23.1.12 |
swIpMacBindingAutosaveFileNameThe path name specifies the path of the file to be auto saving.
By default, the filename is dhcpsnp.cfg.rw DisplayString .dlink-common-mgmt.23.1.13 |
swIpMacBindingSaveActivityWhen this object is set to start(2), the device will begin saving DHCPv4 snooping bindind entries immediately.rw Enumeration .dlink-common-mgmt.23.1.14 |
swIpMacBindingAutoRecoverTimeAutomatically recover port from shutdown state when the auto recover timer timeout.
Note:
The max entry range is (60..1000000)seconds.
The value -1 means infinite to shutdown and never recover the port shutdown state.rw INTEGER .dlink-common-mgmt.23.1.15 |
swIpMacBindingInfo OBJECT IDENTIFIER .dlink-common-mgmt.23.2 |
swIpMacBindingPortMgmt OBJECT IDENTIFIER .dlink-common-mgmt.23.3 |
swIpMacBindingAllPortStateThis object enables/disables IP-MAC binding on all the system ports.
This action is only applicable when users have write privileges,
and can only be viewed when users have read privileges.
Note:
enable-strict (2): This means strict mode (SW learning). In this mode all packets will be sent
to the CPU. The user can choose if the port will check the ARP packets
and IP packets of the IP-MAC-PORT Binding entries. If the MAC
address can be found or not found by the entry, the MAC address will
be set as a dynamic learned or blocked entry, respectively. Other
packets will be sent to the CPU and dropped.
enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP
broadcast packets will be sent to the CPU. If the user chooses ,
the port will directly learn MAC addresses on non-ARP and non-IP
broadcast packets, so these packets will be bypassed.
However, if the switch receives ARP or IP broadcast packets and
cannot bypass the IP MAC Binding checks, the switch will set
this MAC address as blocked and all packets from this MAC
address will be dropped.rw Enumeration .dlink-common-mgmt.23.3.1 |
swIpMacBindingPortTableThe table specifies the IP-MAC binding function of a specified port. SEQUENCE OF SwIpMacBindingPortEntry .dlink-common-mgmt.23.3.2 |
swIpMacBindingPortEntryA list containing information about the IP-MAC binding function of a port. SwIpMacBindingPortEntry .dlink-common-mgmt.23.3.2.1 |
swIpMacBindingPortIndexThis object indicates the module's port number. (1..Max port
number in the module).ro INTEGER .dlink-common-mgmt.23.3.2.1.1 |
swIpMacBindingPortStateThis object enables (strict or loose mode)/disables IP-MAC binding
on the specified port.
Note:
enable-strict (2): This means strict mode (SW learning). All packets are sent
to the CPU. If the user chooses this option, the port will check ARP packets
and IP packets by the IP-MAC-PORT Binding entries. If the MAC
address can or cannot be found by the entry, the MAC will
be set as a dynamic learned or blocked entry, respectively. Other
packets will be sent to the CPU and dropped.
enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP
broadcast packets will be sent to the CPU. If the user chooses,
the port will learn MAC addresses on non-ARP and non-IP
broadcast packets directly, so these packets will be bypassed.
However, if the switch receives ARP or IP broadcast packets and
cannot bypass the IP MAC Binding checks, the switch will set
this MAC address as blocked and all packets from this MAC
address will be dropped.rw Enumeration .dlink-common-mgmt.23.3.2.1.2 |
swIpMacBindingPortZeroIPStateSpecifies whether to allow ARP packets with the SIP address 0.0.0.0,
regardless of whether the IP address 0.0.0.0 is set in the binding list or not.
When set to enable, the ARP packets with the SIP address 0.0.0.0 will be allowed. When set to disable,
ARP packets with the SIP address 0.0.0.0 will be dropped.
Note:
This option does not affect the IP-MAC-Port binding ACL Mode.rw Enumeration .dlink-common-mgmt.23.3.2.1.3 |
swIpMacBindingPortForwardDhcpPktThis object can be set to forward DHCP packets or not forward DHCP packets on the specified port.rw Enumeration .dlink-common-mgmt.23.3.2.1.4 |
swIpMacBindingPortDHCPSnoopMaxEntryThis object indicates the max entry created by DHCP packets on the
specified port.
Note:
The max entry range is (0..N), the N value indicates the maximum number, which is
determined by the project itself.
When 0 is set on the specified port, there is no limit on the maximum number of entries that can be created by DHCP packets .rw INTEGER .dlink-common-mgmt.23.3.2.1.5 |
swIpMacBindingPortDHCPSnoopEntryClearActionWhen set to start (2), the address binding entries learned
for the specified ports will be cleared.
When get, it always returns other (1).rw Enumeration .dlink-common-mgmt.23.3.2.1.6 |
swIpMacBindingPortModeThe mode of this entry.
arp: This entry is specified as an ARP mode entry, and this
entry will not be added as an access entry. If this
object is not specified, the mode defaults to ARP mode.
If the system is in ARP mode, the ARP mode entries and
ACL mode entries will be effective. If the system is in
ACL mode, only the ACL mode entries will be active.
acl: This entry is specified as an ACL mode entry. If the
user enables the ACL mode, this entry will be added as
an access entry.rw Enumeration .dlink-common-mgmt.23.3.2.1.7 |
swIpMacBindingPortStopLearningThresholdThis object indicates the threshold to stop learning new MAC addresses on
the specified port. When the number of blocked entries exceeds the threshold,
the port will stop learning new addresses. The packet with new addresses will be dropped.
Note:
When 0 is set on the specified port, it means no limit.rw INTEGER .dlink-common-mgmt.23.3.2.1.8 |
swIpMacBindingPortRecoverLearningWhen set to start (2), it will change from the stop_learning state to the normal state
on the specified port.
When get, it always returns other (1).rw Enumeration .dlink-common-mgmt.23.3.2.1.9 |
swIpMacBindingPortLearningStatusThis object indicates the learning status of a port. When the status is stop (2),
the port will stop learning new addresses and the packets with new addresses will be dropped.ro Enumeration .dlink-common-mgmt.23.3.2.1.10 |
swIpMacBindingPortIPv6StateThis object enables/disables IPv6 IP-MAC binding
on the specified port.rw Enumeration .dlink-common-mgmt.23.3.2.1.11 |
swIpMacBindingPortIPv6DHCPSnoopMaxEntryThis object indicates the maximum number of entries that can be learned by IPv6 DHCP snooping
on the specified port.
Note:
The maximum entry range is (0..N), the N value indicates the maximum number, which is
determined by the project itself.
When 0 is set on the specified port, there is no limit on the number of maximum entries that can be learned by DHCP
snooping.rw INTEGER .dlink-common-mgmt.23.3.2.1.12 |
swIpMacBindingPortNDSnoopMaxEntryThis object indicates the maximum number of entries that can be learned by ND snooping
on the specified port.
Note:
The maximum entry range is (0..N), the N value indicates the maximum number, which is
determined by the project itself.
When 0 is set on the specified port, there is no limit on the maximum number of entries that can be learned by ND
snooping is no limit.rw INTEGER .dlink-common-mgmt.23.3.2.1.13 |
swIpMacBindingPortIPv6DHCPSnoopEntryClearActionWhen set to start (2), the address binding entries learned by
IPv6 DHCP snooping on the specified ports will be cleared.
When get, it always returns other (1).rw Enumeration .dlink-common-mgmt.23.3.2.1.14 |
swIpMacBindingPortNDSnoopEntryClearActionWhen set to start (2), the address binding entries learnt by
ND snooping on the specified ports will be cleared.
When get, it always returns other (1).rw Enumeration .dlink-common-mgmt.23.3.2.1.15 |
swIpMacBindingPortARPInspectionThis object used to set ARP inspection state on the specified port.
When ARP inspection is enabled on the port, the legal ARP packets will be forward, while the illegal packets will be dropped.
strict : In this mode, all packets are dropped by default until a legal ARP or broadcast IP packets are detected.
loose: In this mode, all packets are forwarded by default until an illegal ARP or broadcast IP packets are detected.rw Enumeration .dlink-common-mgmt.23.3.2.1.16 |
swIpMacBindingPortIPInspectionThis object used to set the IP inspection state on the specified port.
When IP inspection is enabled on the port, the legal IP packets will be forwarded, while the illegal IP packets will be dropped.rw Enumeration .dlink-common-mgmt.23.3.2.1.17 |
swIpMacBindingPortIPProtocolThis object is used to set which kind of IP packets need to be checked by IP-MAC-PORT binding on the specified port.
ipv4: Only IPv4 packets will be checked.
ipv6: Only IPv6 packets will be checked.
all: Both IPv4 and IPv6 packets will be checked.rw Enumeration .dlink-common-mgmt.23.3.2.1.18 |
swIpMacBindingPortNDInspectionThis object used to set ND inspection state on the specified port.
When ND inspection is enabled on the port, the legal ND packets will be forward, while the illegal packets will be dropped.rw Enumeration .dlink-common-mgmt.23.3.2.1.19 |
swIpMacBindingPortLimitRateValueThis object is the threshold at which the specified limit rate will turn on.
Note:
The max entry range is (1..2048)pps.
The value -1 means not limit the dhcp packet to cpu.rw INTEGER .dlink-common-mgmt.23.3.2.1.20 |
swIpMacBindingPortLimitRateActionThere are two actions to take for limit rate, drop and shutdown
drop:discards dhcp packets that exceed the limit rate value
shutdown:shutdown the port when the dhcp packet rate value specified for limit rate is reached.rw Enumeration .dlink-common-mgmt.23.3.2.1.21 |
swIpMacBindingMgmt OBJECT IDENTIFIER .dlink-common-mgmt.23.4 |
swIpMacBindingTableThis table specifies the IP-MAC binding information. SEQUENCE OF SwIpMacBindingEntry .dlink-common-mgmt.23.4.1 |
swIpMacBindingEntryThe IP-MAC binding entry used to add/delete/configure the address
pair of the switch's authorized user database. SwIpMacBindingEntry .dlink-common-mgmt.23.4.1.1 |
swIpMacBindingIpIndexThe IP address of the IP-MAC binding entry.ro IpAddress .dlink-common-mgmt.23.4.1.1.1 |
swIpMacBindingMacThe MAC address of the IP-MAC binding entry.rw MacAddress (SNMPv2-TC) .dlink-common-mgmt.23.4.1.1.2 |
swIpMacBindingStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.23.4.1.1.3 |
swIpMacBindingPortsThe port members of this entry.rw PortList .dlink-common-mgmt.23.4.1.1.4 |
swIpMacBindingActionThe action of this entry.
Note: Supported in IP-MAC binding v3.5 and the earlier versions.ro Enumeration .dlink-common-mgmt.23.4.1.1.5 |
swIpMacBindingModeThe mode of this entry.
arp: This entry is specified as an ARP mode entry, and this
entry will not be added as an access entry. If this
object is not specified, the mode defaults to ARP mode.
If the system is in ARP mode, the ARP mode entries and
ACL mode entries will be effective. If the system is in
ACL mode, only the ACL mode entries will be active.(Note:
Supported on IP-MAC binding v3.5 and the earlier version.)
acl: This entry is specified as an ACL mode entry. If the
user enables the ACL mode, this entry will be added as
an access entry. (Note: Supported in IP-MAC binding v3.3
only).
dhcp-snooping: This mode cannot be configured, and when the
dhcp-snooping mode is employed, it means that this entry has
been learned by DHCP snooping.
static: This entry is manually configured.rw Enumeration .dlink-common-mgmt.23.4.1.1.6 |
swIpMacBindingAclStatusThis object indicates the ACL status of this entry.ro Enumeration .dlink-common-mgmt.23.4.1.1.7 |
swIpMacBindingBlockedTableThis table displays information regarding the blocked MAC addresses. SEQUENCE OF SwIpMacBindingBlockedEntry .dlink-common-mgmt.23.4.2 |
swIpMacBindingBlockedEntryThe entry cannot be created or configured. It can only be deleted. SwIpMacBindingBlockedEntry .dlink-common-mgmt.23.4.2.1 |
swIpMacBindingBlockedVIDThis object specifies the VLAN ID.ro VlanId .dlink-common-mgmt.23.4.2.1.1 |
swIpMacBindingBlockedMacThe MAC address that was blocked.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.23.4.2.1.2 |
swIpMacBindingBlockedVlanNameThis object specifies the VLAN name.ro DisplayString (SNMPv2-TC) .dlink-common-mgmt.23.4.2.1.3 |
swIpMacBindingBlockedPortThe port that the MAC is associated with.ro INTEGER .dlink-common-mgmt.23.4.2.1.4 |
swIpMacBindingBlockedTypeThe value is always blockByAddrBind. This entry will be deleted when the value is set to 'delete'.rwobsolete Enumeration .dlink-common-mgmt.23.4.2.1.5 |
swIpMacBindingBlockedTimeThis object specifies the last time that this entry was generated.ro DateAndTime (SNMPv2-TC) .dlink-common-mgmt.23.4.2.1.6 |
swIpMacBindingBlockedStatusThe status of this entry.
Currently only the destroy (6) option can be used to delete this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.23.4.2.1.7 |
swIpMacBindingDHCPSnoopTableThe table specifies information regarding the IP-MAC binding entries that were learned by the DHCP snooping
function. SEQUENCE OF SwIpMacBindingDHCPSnoopEntry .dlink-common-mgmt.23.4.3 |
swIpMacBindingDHCPSnoopEntryA list containing information about the DHCP snooping learning
IP-MAC binding entry. SwIpMacBindingDHCPSnoopEntry .dlink-common-mgmt.23.4.3.1 |
swIpMacBindingDHCPSnoopIpIndexThe IP address of this entry.ro IpAddress .dlink-common-mgmt.23.4.3.1.1 |
swIpMacBindingDHCPSnoopMacThe MAC address of this entry.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.23.4.3.1.2 |
swIpMacBindingDHCPSnoopLeaseTimeSpecifies the lease time of this entry.
When the lease time expires, this entry will be removed from
this port.ro INTEGER .dlink-common-mgmt.23.4.3.1.3 |
swIpMacBindingDHCPSnoopPortSpecifies the port of this entry.ro INTEGER .dlink-common-mgmt.23.4.3.1.4 |
swIpMacBindingDHCPSnoopStatusSpecifies the status (inactive or active) of this entry.ro Enumeration .dlink-common-mgmt.23.4.3.1.5 |
swIpMacBindingIPv6TableThis table specifies the IPv6 IP-MAC binding information. SEQUENCE OF SwIpMacBindingIPv6Entry .dlink-common-mgmt.23.4.4 |
swIpMacBindingIPv6EntryThe IPv6 IP-MAC binding entry is used to add/delete/configure an
IPv6 address and MAC address pair in the switch's authorized user
database. SwIpMacBindingIPv6Entry .dlink-common-mgmt.23.4.4.1 |
swIpMacBindingIPv6AddrThe IPv6 address of the IPv6 IP-MAC binding entry.ro Ipv6Address (IPV6-TC) .dlink-common-mgmt.23.4.4.1.1 |
swIpMacBindingIPv6MacAddrThe MAC address of the IPv6 IP-MAC binding entry.rw MacAddress (SNMPv2-TC) .dlink-common-mgmt.23.4.4.1.2 |
swIpMacBindingIPv6PortlistThe port members of the IPv6 IP-MAC binding entry.rw PortList .dlink-common-mgmt.23.4.4.1.3 |
swIpMacBindingIPv6ModeThe mode of the IPv6 IP-MAC binding entry.
static(1): When the Static mode is employed, it means
this entry is manually configured.
dhcp-snooping(2): This mode cannot be configured, and
when the dhcp-snooping mode is employed, it means this
entry is to be learned by IPv6 DHCP snooping.
nd-snooping(3): This mode cannot be configured, and when
the nd-snooping mode is employed, it means this entry is
to be learned by ND snooping.ro Enumeration .dlink-common-mgmt.23.4.4.1.4 |
swIpMacBindingIPv6ACLStatusThe ACL Status of the IPv6 IP-MAC binding entry.ro Enumeration .dlink-common-mgmt.23.4.4.1.5 |
swIpMacBindingIPv6RowStatusThe status of this conceptual row. To create a row in this
table, a manager must set this object to createAndGo(4).
To delete a row in this table, a manager must set this object to destroy(6).rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.23.4.4.1.6 |
swIpMacBindingIPv6DHCPSnoopTableThe table specifies information regarding the IPv6 DHCP
snooping function learning IPv6 IP-MAC binding entries. SEQUENCE OF SwIpMacBindingIPv6DHCPSnoopEntry .dlink-common-mgmt.23.4.5 |
swIpMacBindingIPv6DHCPSnoopEntryA list containing information about the IPv6 DHCP snooping learning
IPv6 IP-MAC binding entry. SwIpMacBindingIPv6DHCPSnoopEntry .dlink-common-mgmt.23.4.5.1 |
swIpMacBindingIPv6DHCPSnoopAddrThe IPv6 address of this entry.ro Ipv6Address (IPV6-TC) .dlink-common-mgmt.23.4.5.1.1 |
swIpMacBindingIPv6DHCPSnoopMacThe MAC address of this entry.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.23.4.5.1.2 |
swIpMacBindingIPv6DHCPSnoopLeaseTimeSpecifies the lease time of this entry.
When the lease time expires, this entry will be removed.ro INTEGER .dlink-common-mgmt.23.4.5.1.3 |
swIpMacBindingIPv6DHCPSnoopPortSpecifies the port of this entry.ro INTEGER .dlink-common-mgmt.23.4.5.1.4 |
swIpMacBindingIPv6DHCPSnoopStatusSpecifies the status (inactive or active) of this entry.ro Enumeration .dlink-common-mgmt.23.4.5.1.5 |
swIpMacBindingNDSnoopTableThe table specifies information regarding the ND
snooping function of learning IPv6 IP-MAC binding entries. SEQUENCE OF SwIpMacBindingNDSnoopEntry .dlink-common-mgmt.23.4.6 |
swIpMacBindingNDSnoopEntryA list of information about the ND snooping learning
IPv6 IP-MAC binding entry. SwIpMacBindingNDSnoopEntry .dlink-common-mgmt.23.4.6.1 |
swIpMacBindingNDSnoopAddrThe IPv6 address of this entry.ro Ipv6Address (IPV6-TC) .dlink-common-mgmt.23.4.6.1.1 |
swIpMacBindingNDSnoopMacThe MAC address of this entry.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.23.4.6.1.2 |
swIpMacBindingNDSnoopLeaseTimeSpecifies the lease time of this entry.
When the lease time expires, this entry will be removed.ro INTEGER .dlink-common-mgmt.23.4.6.1.3 |
swIpMacBindingNDSnoopPortSpecifies the port of this entry.ro INTEGER .dlink-common-mgmt.23.4.6.1.4 |
swIpMacBindingNDSnoopStatusSpecifies the status (inactive or active) of this entry.ro Enumeration .dlink-common-mgmt.23.4.6.1.5 |
swIpMacBindingUploadDownloadTableThis table indicates information about the DHCPv4 snooping binding entry upload or download parameters. SEQUENCE OF SwIpMacBindingUploadDownloadEntry .dlink-common-mgmt.23.4.7 |
swIpMacBindingUploadDownloadEntryA list with the DHCPv4 snooping binding entry upload or download parameters.It's contains the Protocol type,
IP address type, IP address, Username, Password, TCP port number, Filename, and action of this entry SwIpMacBindingUploadDownloadEntry .dlink-common-mgmt.23.4.7.1 |
swIpMacBindingUploadDownloadProtocolThis object provides the user with a choice of uploading or downloading the selected protocol type.
tftp(1) selecting the TFTP protocol to upload or download the DHCPv4 snooping database.
ftp(2) selecting the FTP protocol to upload or download the DHCPv4 snooping database.ro Enumeration .dlink-common-mgmt.23.4.7.1.1 |
swIpMacBindingUploadDownloadServerIPAddressTypeA value that represents a type of Internet address.
unknown(0) An unknown address type. This value MUST
be used if the value of the corresponding
InetAddress object is a zero-length string.
It may also be used to indicate an IP address
which is not in one of the formats defined
below.
ipv4(1) An IPv4 address as defined by the
InetAddressIPv4 textual convention.
ipv6(2) An IPv6 address as defined by the
InetAddressIPv6 textual convention.
dns(16) A DNS domain name as defined by the
InetAddressDNS textual convention.rw InetAddressType (INET-ADDRESS-MIB) .dlink-common-mgmt.23.4.7.1.2 |
swIpMacBindingUploadDownloadServerIPAddressDenotes a generic Internet address.
An InetAddress value is always interpreted within the context
of an InetAddressType value. Every usage of the InetAddress
textual convention is required to specify the InetAddressType
object that provides the context. It is suggested that the
InetAddressType object be logically registered before the
object(s) that use the InetAddress textual convention, if
they appear in the same logical row.
The value of an InetAddress object must always be
consistent with the value of the associated InetAddressType
object. Attempts to set an InetAddress object to a value
inconsistent with the associated InetAddressType
must fail with an inconsistentValue error.rw InetAddress (INET-ADDRESS-MIB) .dlink-common-mgmt.23.4.7.1.3 |
swIpMacBindingUploadDownloadUsernameThe username and password to be authenticated by the FTP server.
This value MUST be corresponding with Password object, and only use to FTP protocol.rw DisplayString .dlink-common-mgmt.23.4.7.1.4 |
swIpMacBindingUploadDownloadPasswordThe username and password to be authenticated by the FTP server.
This value MUST be corresponding with Username object, and only use to FTP protocol.rw DisplayString .dlink-common-mgmt.23.4.7.1.5 |
swIpMacBindingUploadDownloadTcpPortThis object indicates the FTP connecting port number.rw INTEGER .dlink-common-mgmt.23.4.7.1.6 |
swIpMacBindingUploadDownloadFileNameThe name of the file to be downloaded from or uploaded to the TFTP or FTP server.rw DisplayString .dlink-common-mgmt.23.4.7.1.7 |
swIpMacBindingUploadDownloadActionThis object provides the user with a choice of uploading or downloading the selected file.rw Enumeration .dlink-common-mgmt.23.4.7.1.10 |
swIpMacBindingNotify OBJECT IDENTIFIER .dlink-common-mgmt.23.5 |
swIpMacBindingNotifyPrefix OBJECT IDENTIFIER .dlink-common-mgmt.23.5.0 |
swIpMacBindingViolationTrapWhen the IP-MAC Binding trap is enabled, if there's a new MAC that violates the pre-defined
port security configuration, a trap will be sent out. NOTIFICATION-TYPE .dlink-common-mgmt.23.5.0.1 |
swIpMacBindingStopLearningTrapWhen the IP-MAC Binding trap is enabled, if the specific port changes from a
normal state to a stop_learning state, a trap will be sent out. NOTIFICATION-TYPE .dlink-common-mgmt.23.5.0.2 |
swIpMacBindingRecoverLearningTrapWhen the IP-MAC Binding trap is enabled, if the specific port changes from a
stop_learning state to a normal state, a trap will be sent out. NOTIFICATION-TYPE .dlink-common-mgmt.23.5.0.3 |
swIpMacBindingIPv6ViolationTrapWhen the IP-MAC Binding trap is enabled, if there's a new MAC that violates the pre-defined
IPv6 IP-MAC Binding configuration, a trap will be sent out. NOTIFICATION-TYPE .dlink-common-mgmt.23.5.0.4 |
swIpMacBindingShutdownTrapWhen the rate limiting is shutdown mode and the DHCP rate excludes
the limiting, a trap will be sent out. NOTIFICATION-TYPE .dlink-common-mgmt.23.5.0.5 |
swIpMacBindingRecoveryTrapWhen the port is shutdown by DHCP rate limiting and the auto-recovery
timer is timeout, a trap will be sent out. NOTIFICATION-TYPE .dlink-common-mgmt.23.5.0.6 |
swIpMacBindingNotificationBidings OBJECT IDENTIFIER .dlink-common-mgmt.23.5.2 |
swIpMacBindingViolationIPThis object indicates the IP address that violates the IP-MAC Binding configuration.ro IpAddress .dlink-common-mgmt.23.5.2.1 |
swIpMacBindingViolationMacThis object indicates the MAC address that violates the IP-MAC Binding configuration.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.23.5.2.2 |
swIpMacBindingViolationIPv6AddrThis object indicates the IPv6 address that violates the IPv6 IP-MAC Binding entry.ro Ipv6Address (IPV6-TC) .dlink-common-mgmt.23.5.2.3 |