INTEL-L3TC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for INTEL-L3TC-MIB.
32
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
l3tcache OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.37 |
RFC1213-MIB Unknown .1.3.6.1.4.1.208.2.37 |
l3tcFrontPorts OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.37.1 |
l3tcFrontPortsTableNumbers and Cache-modes of front ports SEQUENCE OF L3tcFrontPortsEntry .1.3.6.1.4.1.208.2.37.1.1 |
l3tcFrontPortsEntry L3tcFrontPortsEntry .1.3.6.1.4.1.208.2.37.1.1.1 |
l3tcFrontPortsNumberFront Port number 1..24 identifying subject front portro INTEGER .1.3.6.1.4.1.208.2.37.1.1.1.1 |
l3tcFrontPortsModeTells the mode (normal/client/server) of the portrw Enumeration .1.3.6.1.4.1.208.2.37.1.1.1.2 |
l3tcServers OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.37.2 |
l3tcServersTableUserGroup membership for prefices of IP-addresses SEQUENCE OF L3tcServersEntry .1.3.6.1.4.1.208.2.37.2.1 |
l3tcServersEntry L3tcServersEntry .1.3.6.1.4.1.208.2.37.2.1.1 |
l3tcServersIndexBox-wide uniquely identifying number of subject cache serverro INTEGER .1.3.6.1.4.1.208.2.37.2.1.1.1 |
l3tcServersIpAddressIpAddress of subject cache serverrw IpAddress .1.3.6.1.4.1.208.2.37.2.1.1.2 |
l3tcServersDeleteEntryWrite 1 to this attribute to delete entire entry.
Write 2 to a non-existing row creates a new row.rw INTEGER .1.3.6.1.4.1.208.2.37.2.1.1.3 |
l3tcServersPortNumberIdentifies the Front Port to which this server is attachedrw INTEGER .1.3.6.1.4.1.208.2.37.2.1.1.4 |
l3tcServersHeartBeatUrlThe URL to request when performing heart-beat checkingrw DisplayString .1.3.6.1.4.1.208.2.37.2.1.1.5 |
l3tcServersNameThe name for identification of the server presented
to the operatorrw DisplayString .1.3.6.1.4.1.208.2.37.2.1.1.6 |
l3tcServersHeartBeatStatusActual status of heart-beat monitoring of serverro Enumeration .1.3.6.1.4.1.208.2.37.2.1.1.7 |
l3tcTcpPorts OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.37.3 |
l3tcTcpPortsTableList of Tcp Port Numbers subject to l3tc-routing SEQUENCE OF L3tcTcpPortsEntry .1.3.6.1.4.1.208.2.37.3.1 |
l3tcTcpPortsEntry L3tcTcpPortsEntry .1.3.6.1.4.1.208.2.37.3.1.1 |
l3tcTcpPortsNumberThis TCP Port Number is subject to t-cache-forwardingro INTEGER .1.3.6.1.4.1.208.2.37.3.1.1.1 |
l3tcTcpPortsDeleteEntryWrite 1 to this attribute to delete entire entry.
Write 2 to a non-existing row creates a new row.rw INTEGER .1.3.6.1.4.1.208.2.37.3.1.1.2 |
l3tcStaticIPs OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.37.4 |
l3tcStaticIPsTableOperator-assigned servers for particular IP sites SEQUENCE OF L3tcStaticIPsEntry .1.3.6.1.4.1.208.2.37.4.1 |
l3tcStaticIPsEntry L3tcStaticIPsEntry .1.3.6.1.4.1.208.2.37.4.1.1 |
l3tcStaticIPsPacketDestIPIP Address of subject IP sitero IpAddress .1.3.6.1.4.1.208.2.37.4.1.1.1 |
l3tcStaticIPsDeleteEntryWrite 1 to this attribute to delete entire entry.
Write 2 to a non-existing row creates a new row.rw INTEGER .1.3.6.1.4.1.208.2.37.4.1.1.2 |
l3tcStaticIPsServerIndexIndex value of cache server assigned to subject IP siterw INTEGER .1.3.6.1.4.1.208.2.37.4.1.1.3 |
l3tcSingleAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.37.5 |
l3tcPollingIntervalInterval in seconds between successive heart-beat-pollsrw INTEGER .1.3.6.1.4.1.208.2.37.5.1 |
l3tcEnabledWhether or not the TC routing is enabledrw Enumeration .1.3.6.1.4.1.208.2.37.5.2 |
l3tcRevertToDefaultsThis is a bit mask setting selected parts of the configuration
to factory defaults.
value & 1: causes all front ports to revert to normal mode. All
servers referring to a leaving-server-mode frontport are
deleted too and all static sites reffering to deleted servers
are deleted too.
value & 2: removes all servers and all static sites
value & 4: removes all TCP-protocols
value & 8: removes all static sites
value & 16: sets polling interval to 30 seconds and switches off
the entire transparent caching facility
As an example setting this attribute to the value 31 completely
restores factory defaults.rw INTEGER .1.3.6.1.4.1.208.2.37.5.3 |