Home/Catalog/INTEL-CSU-HW-MIB

INTEL-CSU-HW-MIB

AI MIB Summary

Standard SNMP MIB module defining data structures for INTEL-CSU-HW-MIB.

59
Objects
Active
Status
4
Dependencies

Imported Objects

Objects

59 total
Object Name
csudsu
OBJECT IDENTIFIER
.1.3.6.1.4.1.208.2.36
IMPORTS
Unknown
.1.3.6.1.4.1.208.2.36
csu
OBJECT IDENTIFIER
.1.3.6.1.4.1.208.2.36.1
csuInfoTableThe CSU Information table.
SEQUENCE OF CSUInfoEntry
.1.3.6.1.4.1.208.2.36.1.1
csuInfoEntryAn entry in the CSU Information table.
CSUInfoEntry
.1.3.6.1.4.1.208.2.36.1.1.1
csuInfoLineIndexThe index value which uniquely identifies the CSU interface to which this entry is applicable.ro
INTEGER
.1.3.6.1.4.1.208.2.36.1.1.1.1
csuAlarmThe currently active alarm condition, if any. Red alarm corresponds to a Loss Of Signal (LOS), and most commonly occurs when the cable is unplugged or broken. Blue alarm indicates that the local equipment is properly connected but that the carrier CSU is sending a unique data pattern, indicating that it has lost its remote data source. Yellow alarm indicates that the local equipment is receiving a valid signal, but this signal indicates that the carrier CSU cannot frmae to a signal from us. This is normal for up to 30 seconds after connection, but if it persists indicates that there is a break in the T1 connection in the direction toward the carrier. Out Of Framing is any other condition severe enough that the local CSU cannot lock onto the signal from the carrier CSU. This may be because of mismatched configurations. Likely candidates are Line Coding and Framing Format. If these are correctly set at both ends, the line should be tested by the T1 service provider.ro
Enumeration
.1.3.6.1.4.1.208.2.36.1.1.1.2
csuReceiveLevelThe currently detected signal strength. 1:+2 to -7.5db 2:-7.5 to -15db 3:-15 to -22.5db 4: < -22.5 dbro
Enumeration
.1.3.6.1.4.1.208.2.36.1.1.1.3
csuLoopbackStateThis variable identifies the current active loopback, if any.ro
Enumeration
.1.3.6.1.4.1.208.2.36.1.1.1.4
csuLossofsynchronizationA count of the number of seconds during which a Loss of synchronization has been triggeredro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.5
csuChangeofFrameAlignmentA count of the number of times that there has been a change of Frame Alignmentro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.6
csuEightZeroDetectA count of the number of times that a string of 8 contiguous zeros has been detectedro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.7
csuSixteenZeroDetectA count of the number of times that a string of 16 contiguous zeros has been detectedro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.8
csuSeverelyErroredFramingEventA count of number of severely Severely Errored Framing Eventsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.9
csuB8ZSCodeWordDetectA count of the number of times that a B8ZS Code Word has been detectedro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.10
csuFrameBitErrorA count of Frame Bit Errorsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.11
csuReceivePulseDensityViolationA count of Receive Pulse Density Violationsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.12
csuTransmitPulseDensityViolationA count of Transmit Pulse Density Violationsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.13
csuJitterAttenuatorLimitTripA count of Jitter Attenuator Limit Tripsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.14
csuLossofReceiveClockLoss of Receive Clockro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.15
csuFramerReceiveCarrierLossA count of the number of times that a Framer Receive Carrier Loss has ocurred. Because a Framer Receive Carrier Loss is an LOS indicator, this also counts the number of times that the Red alam state has been entered.ro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.16
csuLineCodeViolationCountA count of Line Code Violationsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.17
csuPathCodeViolationCountA count of Path Code Violationsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.18
csuMultiframesOutofSyncCountA count of the number of Multiframes which have passed without being able to sucessfully reframe.ro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.19
csuCRC6errorsA count of CRC6 errorsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.20
csuErrorRateThe CSU error rate. This variable describes a rate in scientific notation.ro
DisplayString
.1.3.6.1.4.1.208.2.36.1.1.1.21
csuLinkStateThe state of the protocol stack using the CSUro
Enumeration
.1.3.6.1.4.1.208.2.36.1.1.1.22
csuErrorsThisSecondThe number of physical bit errors detected in the last secondro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.23
csuPercentEFSThe number of error free seconds as a percentage of the total available secondsro
INTEGER
.1.3.6.1.4.1.208.2.36.1.1.1.24
csuTXChannelPayloadTransmit channel payloads, channels 1 through 24ro
DisplayString
.1.3.6.1.4.1.208.2.36.1.1.1.25
csuRXChannelPayloadReceive channel payloads, channels 1 through 24ro
DisplayString
.1.3.6.1.4.1.208.2.36.1.1.1.26
csuDetectedChannelMapThe detected channel map. Each channel maps into one BYTE, starting with channel one in the first byte. A value of 0 indicates that channel activity has been detected ON, 1 indicates that the channel is detected OFF, and 2 that the channel state has not yet been determined.ro
DisplayString
.1.3.6.1.4.1.208.2.36.1.1.1.27
csuYellowAlarmCountA count of the number of Yellow alarmsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.28
csuAISDefectsA count of the number of AIS Defectsro
Counter
.1.3.6.1.4.1.208.2.36.1.1.1.29
csuConfigTableThe CSU Configuration table.
SEQUENCE OF CSUConfigEntry
.1.3.6.1.4.1.208.2.36.1.2
csuConfigEntryAn entry in the CSU Configuration table.
CSUConfigEntry
.1.3.6.1.4.1.208.2.36.1.2.1
csuConfigLineIndexThe index value which uniquely identifies the CSU interface to which this entry is applicable.ro
INTEGER
.1.3.6.1.4.1.208.2.36.1.2.1.1
csuChannelBandwidthro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.2
csuDataInversionro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.3
csuDataCodingro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.4
csuTimingModero
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.5
csuLineBuildOutLine Build out values: to be interpreted as follows: csu0DB(1) 0 LBO 0 dB csu75DB(2) 1 LBO -7.5 dB csu15(3) 2 LBO -15 dB csu225(4) 3 LBO -22.5 dB csu0_133(5) 4 LBO 0 to 133 feet csu133_266(6) 5 LBO 133 to 266 feet csu266_399(7) 6 LBO 266 to 399 feet csu399_533(8) 7 LBO 399 to 533 feet csu533_655(9) 8 LBO 533 to 655 feetro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.6
csuLineCodero
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.7
csuPulseDensityEnforcerro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.8
csuFramingFormatro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.9
csuJapaneseCRC6ro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.10
csuReceiverSensitivityro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.11
csuFDLidleCodero
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.12
csuANSIPRMEnablero
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.13
csuANSIPRMaddressro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.14
csuATTresponseEnablero
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.15
csuATTresponseaddressro
Enumeration
.1.3.6.1.4.1.208.2.36.1.2.1.16
csuAllocatedChannelMapThe allocated channel map. Each channel maps into one BYTE, starting with channel one in the first byte. A value indicates that channel is configured ON, and 1 indicates that the channel is configured OFF.ro
DisplayString
.1.3.6.1.4.1.208.2.36.1.2.1.17
csuFracTableThe CSU Fractional table.
SEQUENCE OF CSUFracEntry
.1.3.6.1.4.1.208.2.36.1.3
csuFracEntryAn entry in the CSU Fractional table.
CSUFracEntry
.1.3.6.1.4.1.208.2.36.1.3.1
csuFracLineIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value a csuLineIndex object instance.ro
INTEGER
.1.3.6.1.4.1.208.2.36.1.3.1.1
csuFracNumberThe channel number for this entry.ro
INTEGER
.1.3.6.1.4.1.208.2.36.1.3.1.2
csuFracInUseIndicates whether this channel has been configured as part of the fractional arrangement.ro
Enumeration
.1.3.6.1.4.1.208.2.36.1.3.1.3
csuFracDetectedIndicates the result of channel autodetection. A value of InUse or NotInUse should match the setting of configuration for this channelro
Enumeration
.1.3.6.1.4.1.208.2.36.1.3.1.4
INTEL-CSU-HW-MIB - SNMP MIB Reference | MIBs Explorer