IEEE8021-TEIPS-MIB
AI MIB Summary
The IEEE8021-TEIPS-MIB module provides management interfaces for monitoring and configuring Time-Enabled Interoperable Port Services (TEIPS) within IEEE 802.1Q-compliant Ethernet bridges, specifically tracking synchronization state, clock accuracy, and port-level timing parameters defined in IEEE 802.1AS and related amendments. It enables the retrieval of operational status and performance counters for time-sensitive networking features, including PTP (Precision Time Protocol) grandmaster election, delay measurement, and synchronization failure events.
Copyright (C) IEEE. All Rights Reserved This MIB module is part of IEEE 802.1Q; See the IEEE 802.1Q standard for full legal notices.
Unless otherwise indicated, the references in this MIB module are to IEEE 802.1Q-2011 as amended by the following standards: IEEE 802.1az IEEE 802.1bb IEEE 802.1bc IEEE 802.1be
Main OID:
ieee8021TeipsMib.1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24
43
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
ieee8021TeipsMibCopyright (C) IEEE. All Rights Reserved
This MIB module is part of IEEE 802.1Q;
See the IEEE 802.1Q standard for full legal notices.
Unless otherwise indicated, the references in this
MIB module are to IEEE 802.1Q-2011 as amended by
the following standards:
IEEE 802.1az
IEEE 802.1bb
IEEE 802.1bc
IEEE 802.1be MODULE-IDENTITY .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24 |
ieee8021TeipsNotifications OBJECT IDENTIFIER .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.0 |
ieee8021TeipsIpgAdminFailureAn IPG generates this notification whenever
an adminisistrative command cannot be
executed by the IPS state machine. For
example, when a requested manual switch
cannot be performed because of a signal
failure condition.
The management entity receiving the
notification can identify
the system from the network source
address of the notification and can
identify the IPG by the indices of
the OID of the ieee8021TeipsIpgConfigState
variable in the notification:
ieee8021BridgeBaseComponentId - Identifies
the component on the bridge where the
protection group is configured.
ieee8021TeipsIpgid - The ID of the protection group. NOTIFICATION-TYPE .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.0.1 |
ieee8021TeipsObjects OBJECT IDENTIFIER .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1 |
ieee8021TeipsIpgTableThe IPG table. Each entry in this table corresponds to an
Infrastructure Protection Group (IPG) associated with a PBB
supporting Infrastructure Protection Switching (IPS). SEQUENCE OF Ieee8021TeipsIpgEntry .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1 |
ieee8021TeipsIpgEntryThe IPG table entry. Ieee8021TeipsIpgEntry .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1.1 |
ieee8021TeipsIpgidUniquely identifies an IPG within the PBB. IEEE8021TeipsIpgid (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1.1.1 |
ieee8021TeipsIpgWorkingMAIdentifies the Segment MA that corresponds to
the IPG's working entity. The MA index in
this column must hold a value that is the
value of dot1agCfmStackMaIndex column for
some entry in the dot1agCfmStackTable before
the RowStatus for this row can be set to
Active. Furthermore, this column may not be
modified when the RowStatus for this row is
Active.rw Unsigned32 .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1.1.2 |
ieee8021TeipsIpgProtectionMAIdentifies the Segment MA that corresponds to the
IPG's protection entity. The MA index in this
column must hold a value that is the value of
dot1agCfmStackMaIndex column for some entry in
the dot1agCfmStackTable before the RowStatus
for this row can be set to Active. Furthermore,
this column may not be modified when the
RowStatus for this row is Active.rw Unsigned32 .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1.1.3 |
ieee8021TeipsIpgWorkingPortNumberIdentifies the local Port associated with the
IPG Working Segment.ro IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1.1.4 |
ieee8021TeipsIpgProtectionPortNumberIdentifies the local Port associated with the
IPG Protection Segment.ro IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1.1.5 |
ieee8021TeipsIpgStorageTypeThis object indicates the persistence of this
entry. All read-create columns must be
writable if this column is set to permanent.rw StorageType (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1.1.6 |
ieee8021TeipsIpgRowStatusThe status of this row.
The writable columns in a row cannot be
changed if the row is active. The
TeipsIpgWorkingMA and TeipsIpgProtectionMA
columns must be specified before the row
can be activated.rw RowStatus (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.1.1.7 |
ieee8021TeipsTesiTableThe IPG TE-SID table contains identifies
the TE service instances associated with
an IPG. SEQUENCE OF Ieee8021TeipsTesiEntry .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.2 |
ieee8021TeipsTesiEntryThe TE-IPS TESI entry. Each entry identifies
a TESI associated with an IPG. Ieee8021TeipsTesiEntry .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.2.1 |
ieee8021TeipsTesiIndexThis is an identifier, of local signifigance to a
particular PBB-TE TE-SID associated with an IPG. Unsigned32 .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.2.1.1 |
ieee8021TeipsTesiIdThis column holds the TESI identifier corresponding
to a TE service instance associated with an IPG.rw IEEE8021PbbTeTSidId (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.2.1.2 |
ieee8021TeipsTesiStorageTypeThis object indicates the persistence of this
entry. All read-create columns must be
writable for permanent rows.rw StorageType (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.2.1.3 |
ieee8021TeipsTesiRowStatusThis column holds the status for this row.
When the status is active, no columns of
this table may be modified. All columns
must have a valid value before the row
can be activated.rw RowStatus (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.2.1.4 |
ieee8021TeipsCandidatePsTableThe Candidate PS table lists, in priority order,
from highest priority to lowest priority, the
Maintenance Associations corresponding to
candidate Protection Segments associated with
an IPG. SEQUENCE OF Ieee8021TeipsCandidatePsEntry .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.3 |
ieee8021TeipsCandidatePsEntryA Candidate PS entry. Each entry identifies a
candidate Protection Segment associated with an IPG. Ieee8021TeipsCandidatePsEntry .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.3.1 |
ieee8021TeipsCandidatePsIndexThis is an identifier, of local signifigance
to a particular candidate Protection Segment
associated with an IPG. Unsigned32 .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.3.1.1 |
ieee8021TeipsCandidatePsMAThis column holds the candidate Protection
Segment MA corresponding to a candidate
Protection Segment associated with an IPG.rw Unsigned32 .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.3.1.2 |
ieee8021TeipsCandidatePsPortThis column holds the Port Number
corresponding to the candidate Protection
Segment associated with an IPG.ro IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.3.1.3 |
ieee8021TeipsCandidatePsOperThis column indicates whether or not
the candidate Protection Segment is
operational.ro TruthValue (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.3.1.4 |
ieee8021TeipsCandidatePsStorageTypeThis object indicates the persistence
of this entry. All read-create
columns must be writable for permanent rows.rw StorageType (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.3.1.5 |
ieee8021TeipsCandidatePsRowStatusThis column holds the status for this row.
When the status is active, no columns
of this table may be modified. All
columns must have a valid value before the row
can be activated.rw RowStatus (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.3.1.6 |
ieee8021TeipsIpgConfigTableThe PBB-TE IPS IPG config table contains
configuration and status information for
each IPG configured in the system.
Entries in this table are created implicitly
by the creation of entries in the
ieee8021TeipsIpgTable. SEQUENCE OF Ieee8021TeipsIpgConfigEntry .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4 |
ieee8021TeipsIpgConfigEntryThe IPG confguration table entry. Rows are
created in this table implicitly when a row
is added to the ieee8021TeipsIpgTable. Ieee8021TeipsIpgConfigEntry .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1 |
ieee8021TeipsIpgConfigStateThis column indicates the current state of the
protection switching state machine for an IPG.
The value can be one of the following:
workingSegment(1) The protection switching state machine
is in the WORKING_PATH state.
protectionSegment(2) The protection switching state machine
is in the PROTECTION_PATH state.
waitToRestore(3) The protection switching state machine
is in the WTR state.
protAdmin(4) The protection switching state machine
is in the PROT_ADMIN state.ro Enumeration .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.1 |
ieee8021TeipsIpgConfigCommandStatusThis column indicates the status of
administrative commands within the
protection group. It reflects the current
operational administrative command being
acted upon by the IPG.ro IEEE8021TeipsIpgConfigAdmin (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.2 |
ieee8021TeipsIpgConfigCommandLastThis column indicates the last attempted administrative
command applied to the IPG. It is changed
whenever a write is made to the CommandAdmin column of
this table and is essentially record of the last attempted
administrative operation.ro IEEE8021TeipsIpgConfigAdmin (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.3 |
ieee8021TeipsIpgConfigCommandAdminThis column is used by the operator to request
that the IPG state machine perform some
administrative operation. The operator requests
a command by writing the command value to this
column. The state machine indicates the command
that it is performing by setting the value of the
CommandStatus column of this table. This column
always reads back as clear(1).rw IEEE8021TeipsIpgConfigAdmin (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.4 |
ieee8021TeipsIpgConfigActiveRequestsThis column shows the status of active requests
associated with the IPG.ro IEEE8021TeipsIpgConfigActiveRequests (IEEE8021-TC-MIB) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.5 |
ieee8021TeipsIpgConfigWTRThis column is used to configure the
wait-to-restore timer for the IPG operation.
The timer may be configured in steps of 1 minute
between 5 and 12 minutes, the default being 5.
Additionally, the value 0 is used to indicate
that the IPG is to operate non-revertively. The
value 0 is not permitted if the IPG is configured
for M:1 IPS operation.rw Unsigned32 ( 0 | 5..12 ) UNITS "minutes" .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.6 |
ieee8021TeipsIpgConfigHoldOffThis column is used to configure the hold off
timer. The purpose is to allow IPS to fix the problem
before a higher-layer mechanism, such as PBB-TE TESI
protection, is invoked or to allow an inner IPG to fix
the problem before IPS is invoked by the outer IPG when
IPGs are nested. The hold off timer has a period of
from 0 to 10 seconds, the default being 0, with a 100ms
granularity.rw Unsigned32( 0..100 ) UNITS "deciseconds" .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.7 |
ieee8021TeipsIpgM1ConfigStateThis column indicates the current state of the M:1 protection
switching state machine for an IPG if M:1 IPS is supported.
The value can be one of the following:
psAssigned(1) The protection switching state machine
is in the PS_ASSIGNED state.
segmentOk(2) The protection switching state machine
is in the SEGMENT_OK state.
segmentFailed(3) The protection switching state machine
is in the SEGMENT_FAILED state.
assignNewPs(4) The protection switching state machine
is in the ASSIGN_NEW_PS state.
revertToBetterPs(5) The protection switching state machine
is in the REVERT_T0_BETTER_PS state.ro Enumeration .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.8 |
ieee8021TeipsIpgConfigMWTRThis column is used to configure the M:1 wait-to-restore
timer for the IPG operation if M:1 protection is
supported. The timer may be configured in steps of
1 minute between 5 and 12 minutes, the default being 5.
Additionally, the value 0 is used to indicate that the
IPG is to operate non-revertively.rw Unsigned32 ( 0 | 5..12 ) UNITS "minutes" .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.9 |
ieee8021TeipsIpgConfigNotifyEnableThis column is used to enable or disable transmission
of ieee8021TeipsIpgAdminFailure notifications.
These notifications are generated whenever an
administrative command cannot be performed by the IPG.rw TruthValue (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.10 |
ieee8021TeipsIpgConfigStorageTypeThis object indicates the persistence of this entry. For
permanent objects the ieee8021TeipsIpgConfigCommandAdmin
column must be writable.rw StorageType (SNMPv2-TC) .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.1.4.1.11 |
ieee8021TeipsConformance OBJECT IDENTIFIER .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.2 |
ieee8021TeipsCompliances OBJECT IDENTIFIER .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.2.1 |
ieee8021TeipsGroups OBJECT IDENTIFIER .1.1.1.3.6.1.4.1.42359.2.2.1.2.3.111.standards-association-numbers-series-standards.(2).lan-man-stds.(802).ieee802dot1.(1).1.3.111.2.802.1.1.(1).24.2.2 |