ICF-ETWIST
This MIB module describes devices in the HP Integrated Communication Facility product line.
Main OID:
icfEtwistMib.1.3.6.1.4.1.11.2.14.1.11.1
263
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
263 total| Object Name |
|---|
bridge1010TrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.1.1.0 |
thresholdTrap1010********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.1.1.0.0 |
stpTrap1010********* THIS NOTIFICATION IS OBSOLETE *********
A stpTrap(3) is device type specific to ICF
bridges. It signifies that the Spanning Tree
entity in the bridge has detected a change of
state to either Blocking or Forwarding. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.1.1.0.3 |
temperatureTrap1010********* THIS NOTIFICATION IS OBSOLETE *********
A temperatureTrap(4) is device type specific to
ICF bridges. It signifies that the bridge hardware
has detected an overheated condition. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.1.1.0.4 |
bridgeRemoteTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.1.2.0 |
thresholdTrapRem********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.1.2.0.0 |
stpTrapRem********* THIS NOTIFICATION IS OBSOLETE *********
A stpTrap(3) is device type specific to ICF
bridges. It signifies that the Spanning Tree
entity in the bridge has detected a change of
state to either Blocking or Forwarding. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.1.2.0.3 |
temperatureTrapRem********* THIS NOTIFICATION IS OBSOLETE *********
A temperatureTrap(4) is device type specific to
ICF bridges. It signifies that the bridge hardware
has detected an overheated condition. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.1.2.0.4 |
etherTwist12TrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.1.0 |
thresholdTrapET12********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.1.0.0 |
linkBeatTrapET12********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.1.0.3 |
segmentationTrapET12********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.1.0.4 |
backupLinkTrapET12********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of ifAdminStatus for a backup
port on the hub. The new value of ifAdminStatus
is returned in the PDU.
Backup links are not supported on the HP28688A
hub. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.1.0.5 |
fiberOpticTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.3.0 |
thresholdTrapFiber********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.3.0.0 |
linkBeatTrapFiber********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.3.0.3 |
segmentationTrapFiber********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.3.0.4 |
backupLinkTrapFiber********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of ifAdminStatus for a backup
port on the hub. The new value of ifAdminStatus
is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.3.0.5 |
etherTwist48TrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.4.0 |
thresholdTrapET48********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.4.0.0 |
linkBeatTrapET48********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.4.0.3 |
segmentationTrapET48********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.4.0.4 |
backupLinkTrapET48********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of ifAdminStatus for a backup
port on the hub. The new value of ifAdminStatus
is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.4.0.5 |
thinLANTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.5.0 |
thresholdTrapTLAN********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.5.0.0 |
linkBeatTrapTLAN********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.5.0.3 |
segmentationTrapTLAN********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.5.0.4 |
backupLinkTrapTLAN********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of ifAdminStatus for a backup
port on the hub. The new value of ifAdminStatus
is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.5.0.5 |
etherTwist24STrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.6.0 |
thresholdTrapET24S********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.6.0.0 |
linkBeatTrapET24S********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.6.0.3 |
segmentationTrapET24S********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.6.0.4 |
backupLinkTrapET24S********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of rptrPortAdminStatus for a
backup port on the hub. The new value of
rptrPortAdminStatus is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.6.0.5 |
intrusionTrapET24S********* THIS NOTIFICATION IS OBSOLETE *********
An intrusionTrap(6) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
port security violation has been detected on a
port which has the hubSecPtAlarmEnable flag set
to 'enabled'. The MAC address of the intruder
and the port on which the intrusion occurred are
returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.6.0.6 |
addressMovedTrapET24S********* THIS NOTIFICATION IS OBSOLETE *********
An addressMovedTrap(7) is device type specific
to EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
source MAC address which had been operating at
one port has moved to a new port. The MAC
address that moved, the group and port that the
address moved from, and the group and port that
the address moved to are returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.6.0.7 |
newAddressTrapET24S********* THIS NOTIFICATION IS OBSOLETE *********
A newAddressTrap(8) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
new MAC address has been detected on one of the
hub's ports. The instance of
rptrAddrTrackLastSourceAddress for the port with
the new address is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.6.0.8 |
advStack12TrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.7.0 |
thresholdTrapAS12********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.7.0.0 |
advStack24TrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.8.0 |
thresholdTrapAS24********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.8.0.0 |
advStack48TrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.9.0 |
thresholdTrapAS48********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.9.0.0 |
advStackU8TrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.11.0 |
thresholdTrapASU8********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.11.0.0 |
advStackU16TrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.5.12.0 |
thresholdTrapASU16********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.5.12.0.0 |
repeaterAgentTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.8.1.0 |
thresholdTrapASEN********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.1.0.0 |
linkBeatTrapASEN********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.1.0.3 |
segmentationTrapASEN********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.1.0.4 |
backupLinkTrapASEN********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of rptrPortAdminStatus for a
backup port on the hub. The new value of
rptrPortAdminStatus is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.1.0.5 |
intrusionTrapASEN********* THIS NOTIFICATION IS OBSOLETE *********
An intrusionTrap(6) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
port security violation has been detected on a
port which has the hubSecPtAlarmEnable flag set
to 'enabled'. The MAC address of the intruder
and the port on which the intrusion occurred are
returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.1.0.6 |
addressMovedTrapASEN********* THIS NOTIFICATION IS OBSOLETE *********
An addressMovedTrap(7) is device type specific
to EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
source MAC address which had been operating at
one port has moved to a new port. The MAC
address that moved, the group and port that the
address moved from, and the group and port that
the address moved to are returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.1.0.7 |
newAddressTrapASEN********* THIS NOTIFICATION IS OBSOLETE *********
A newAddressTrap(8) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
new MAC address has been detected on one of the
hub's ports. The instance of
rptrAddrTrackLastSourceAddress for the port with
the new address is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.1.0.8 |
hpicfEnetSMMTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.8.2.4.0 |
thresholdTrapSMM********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.2.4.0.0 |
linkBeatTrapSMM********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.2.4.0.3 |
segmentationTrapSMM********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.2.4.0.4 |
backupLinkTrapSMM********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of rptrPortAdminStatus for a
backup port on the hub. The new value of
rptrPortAdminStatus is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.2.4.0.5 |
intrusionTrapSMM********* THIS NOTIFICATION IS OBSOLETE *********
An intrusionTrap(6) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
port security violation has been detected on a
port which has the hubSecPtAlarmEnable flag set
to 'enabled'. The MAC address of the intruder
and the port on which the intrusion occurred are
returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.2.4.0.6 |
addressMovedTrapSMM********* THIS NOTIFICATION IS OBSOLETE *********
An addressMovedTrap(7) is device type specific
to EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
source MAC address which had been operating at
one port has moved to a new port. The MAC
address that moved, the group and port that the
address moved from, and the group and port that
the address moved to are returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.2.4.0.7 |
newAddressTrapSMM********* THIS NOTIFICATION IS OBSOLETE *********
A newAddressTrap(8) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
new MAC address has been detected on one of the
hub's ports. The instance of
rptrAddrTrackLastSourceAddress for the port with
the new address is returned in the PDU. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.8.2.4.0.8 |
lastSetError********* THIS OBJECT IS OBSOLETE *********
Provide more detailed, enterprise specific error
type. Any error resulting from a SET request will
cause this object to be updated, and the previous
value overwritten. A management entity may
retrieve more detailed error information than that
implied by the pdu's ErrorStatus, especially in
the case of a genErr.roobsolete Enumeration .1.3.6.1.4.1.11.2.14.1.1 |
password********* THIS OBJECT IS OBSOLETE *********
This is the encrypted password for the device. The
algorithm used for the encryption process is HP
proprietary. Third party vendor support is provided
by not setting a password on the device, and using
the community name 'public'.rwobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.1.2 |
reset********* THIS OBJECT IS OBSOLETE *********
When the reset object is set to to 'warm' it
results in a 'warm' reset, which does not clear
the parameters in NOVRAM to factory defaults. When
set to 'cold', it results in NOVRAM being set to
factory defaults. When this object is set, the
agent replies, dallies a short time to allow the
reply to be emitted from the device, then performs
the reset. When read, this object always returns
0.rwobsolete Integer32 --INTEGER { -- noReset(0), -- warm(1), -- cold(2) --} .1.3.6.1.4.1.11.2.14.1.3 |
selfTest********* THIS OBJECT IS OBSOLETE *********
Self test is invoked by setting this flag to
'stExecute. When the object changes to
'stSuccess', the test has completed successfully.
Icf devices will 'hard-fail' if the test does not
succeed.rwobsolete Integer32 --INTEGER { -- stSuccess(0), -- stExecute(1) --} .1.3.6.1.4.1.11.2.14.1.4 |
semaphore********* THIS OBJECT IS OBSOLETE *********
This object allows a set of objects to be locked.
The lock is only assured by the 'cooperation' of
other management entities; they must wait until
the lock is cleared (to value zero) prior to
setting the lock. When this object is set to a
management entity's IP address, if no other
management entity has previously set the lock, the
set will succeed. Otherwise, an error (BadValue)
will be returned. It is the responsibility of the
owning management entity to clear the lock when
the transactions complete. To protect against a
management entity failure during a locked
transaction, the agent is NOT responsible for
verifying which management entity is performing
transactions on locked objects; thus, any
management entity can clear this object at any
time. The agent does not do anything with this
object except disallow multiple sets of different
IP addresses (unless the object has been cleared
to zero). This means management entities can use
this for locking any valid transactions on defined
sets of objects. This object can also be used on
IPX networks by specifying the low 4 bytes of the
station address for the IpAddress.rwobsolete IpAddress .1.3.6.1.4.1.11.2.14.1.5 |
discovery OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.6 |
pollResponse********* THIS OBJECT IS OBSOLETE *********
Flag indicating whether device should respond to
multicast SNMP PDUs. When set 'true', the device
will respond to multicast SNMP PDU's. Otherwise,
the response is discarded.rwobsolete Integer32 -- INTEGER { -- false(0), -- true(1) --} .1.3.6.1.4.1.11.2.14.1.6.1 |
announceAddress********* THIS OBJECT IS OBSOLETE *********
When set to any MAC address, the device will
transmit three identical packets, each with the MAC
source set to the device's MAC address, the MAC
destination to the value of this object, the
destination SAP is F8, and the destination HP XSAP
is 165D. These packets will traverse other ICF
devices, allowing them to learn the port connectivity
of the transmitting device.rwobsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.1.6.2 |
mapAddress********* THIS OBJECT IS OBSOLETE *********
When this object is set a map address search
begins. If the address is detected on only one
port, then the mapPort object is set to the port
number on which the address was detected.
This object is obsolete. This functionality has
now been incorporated into the IETF 802.3 Repeater
MIB. Agents and management applications should
implement that MIB.rwobsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.1.6.3 |
mapState********* THIS OBJECT IS OBSOLETE *********
This object will be set to 'psNone' if the
address set in the mapAddress object has not been
received on any of the device's interface/ports.
It will be set to 'psSingle' if the mapAddress has
been detected on only one interface/port. It will
be set to 'psMany' if the mapAddress has been
detected on more than one interface/port.
This object is obsolete. This functionality has
now been incorporated into the IETF 802.3 Repeater
MIB. Agents and management applications should
implement that MIB.roobsolete Integer32 -- INTEGER { -- psNone(0), -- psSingle(1), -- psMany(2) --} .1.3.6.1.4.1.11.2.14.1.6.4 |
mapPort********* THIS OBJECT IS OBSOLETE *********
The port number on which the map address was
detected. If map state is 'psNone' or 'psMany'
then this object is not valid.
This object is obsolete. This functionality has
now been incorporated into the IETF 802.3 Repeater
MIB. Agents and management applications should
implement that MIB.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.1.6.5 |
ipSubnetMask********* THIS OBJECT IS OBSOLETE *********
This object is the IP subnet mask.roobsolete IpAddress .1.3.6.1.4.1.11.2.14.1.6.6 |
icfEvent OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.7 |
eventNotificationNode OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.7.1 |
evtIpNotify********* THIS OBJECT IS OBSOLETE *********
The network address of the manager node which is
to receive the event notification trap.rwobsolete IpAddress .1.3.6.1.4.1.11.2.14.1.7.1.1 |
evtIpxNotify********* THIS OBJECT IS OBSOLETE *********
The IPX address of the manager node which is to
receive the event notification trap.rwobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.1.7.1.2 |
evtTable********* THIS OBJECT IS OBSOLETE *********
A list of event entries for event processing.obsolete SEQUENCE OF EvtEntry .1.3.6.1.4.1.11.2.14.1.7.2 |
evtIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
event to which this entry is applicable.roobsolete Enumeration .1.3.6.1.4.1.11.2.14.1.7.2.1 |
evtArm********* THIS OBJECT IS OBSOLETE *********
This object arms and disarms events. Events are
implicitly rearmed, that is, once an event occurs,
it is rearmed. Sets to the intrusionEvent
instance of this object are ignored, since
intrusion events are actually armed through the
hubSecPtAlarmEnable object.rwobsolete Integer32 -- INTEGER { -- off(0), -- on(1) --} .1.3.6.1.4.1.11.2.14.1.7.2.2 |
evtTimeSinceOccurrence********* THIS OBJECT IS OBSOLETE *********
This object specifies the number of centiseconds
since this event last occurred.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.1.7.2.3 |
evtThresholdTable********* THIS OBJECT IS OBSOLETE *********
A list of event entries for event processing.obsolete SEQUENCE OF EvtThresholdEntry .1.3.6.1.4.1.11.2.14.1.7.3 |
evthIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
event to which this entry is applicable.roobsolete Integer32 ( 1..5 ) .1.3.6.1.4.1.11.2.14.1.7.3.1 |
evthArm********* THIS OBJECT IS OBSOLETE *********
This object arms and disarms events. The
notification node, the associated event object,
threshold, hysteresis, and time interval should
all be set before an event is armed. The objects
do not need to be re-set if the existing values
are acceptable. The device will refuse to arm an
event with uninitialized objects. Once armed, if
the threshold is met or exceeded during the event
time interval, a trap PDU is sent to the
eventNotificationNode. Subsequently, the
monitored object must fall to or below the
hysteresis before another trap can be sent via the
threshold mechanism. The hysteresis may equal
threshold. Events are implicitly rearmed, that is,
once an event occurs, it is rearmed. Setting this
object to 'on' will result in a genErr in any of
the following cases: object not set; cannot set an
event on this object; time interval not set;
threshold not set.rwobsolete Integer32 -- INTEGER { -- off(0), -- on(1) --} .1.3.6.1.4.1.11.2.14.1.7.3.2 |
evthObject********* THIS OBJECT IS OBSOLETE *********
The data of this object is itself an OBJECT
IDENTIFIER which selects the mib object and
instance that is to be monitored for the event.
Only types INTEGER and Counter are allowed.rwobsolete OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.7.3.3 |
evthThreshold********* THIS OBJECT IS OBSOLETE *********
The threshold against which the variable
specified in evthObject is tested over the time
interval specified in the evthTimeInterval When
the threshold is met or exceeded, the event is
triggered. The event will not trigger again until
the variable falls to or below the evthHysteresis
value, and then meets or exceeds the threshold.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.1.7.3.4 |
evthHysteresis********* THIS OBJECT IS OBSOLETE *********
The low value which the variable specified in
evthObject must fall to or below after exceeding
evthThreshold before the event can re-occur when
the threshold is met or exceeded.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.1.7.3.5 |
evthTimeInterval********* THIS OBJECT IS OBSOLETE *********
The time interval over which the variable
specified in the evthObject is sampled.rwobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.1.7.3.6 |
evthTimeSinceOccurrence********* THIS OBJECT IS OBSOLETE *********
This object specifies the number of centiseconds
since this event was last triggered.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.1.7.3.7 |
linkTest OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.8 |
linkTestAddress OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.8.1 |
linkTest802MacAddress********* THIS OBJECT IS OBSOLETE *********
If this object is set to the MAC address of a
node to link test in the same PDU that sets
linkTestRepetitions to a nonzero value, the link
test performed will use IEEE 802 Test frames.
Note that setting more than one of
linkTest802MacAddress, linkTestIpAddress, and
linkTestIpxAddress to a non-null value in the same
PDU will result in a genErr.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects.rwobsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.1.8.1.1 |
linkTestIpAddress********* THIS OBJECT IS OBSOLETE *********
If this object is set to the network address of a
node to link test in the same PDU that sets
linkTestRepetitions to a nonzero value, the link
test performed will use ICMP Echo packets.
Note that setting more than one of
linkTest802MacAddress, linkTestIpAddress, and
linkTestIpxAddress to a non-null value in the same
PDU will result in a genErr.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects.rwobsolete IpAddress .1.3.6.1.4.1.11.2.14.1.8.1.2 |
linkTestIpxAddress********* THIS OBJECT IS OBSOLETE *********
If this object is set to the IPX address of a
node to link test in the same PDU that sets
linkTestRepetitions to a nonzero value, the link
test performed will use IPX diagnostic packets.
Note that setting more than one of
linkTest802MacAddress, linkTestIpAddress, and
linkTestIpxAddress to a non-null value in the same
PDU will result in a genErr.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects.rwobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.1.8.1.3 |
linkTestRepetitions********* THIS OBJECT IS OBSOLETE *********
The number of link tests that the device is to
complete. When this object is set to a non-zero
value, the linkTestSuccess object is zeroed and
the device begins a link test using IEEE 802.2
Test frames, ICMP Echo packets, or IPX diagnostic
packets depending on the address selected. Link
test results are contained in the link test
success object. This object's value decrements
(to zero) as the test proceeds. The test may be
canceled at any point by setting this object to
0.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.1.8.2 |
linkTestSuccess********* THIS OBJECT IS OBSOLETE *********
For every successful link test, this counter is
incremented. When link tests are completed, this
counter contains the total number of successful
tests.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.1.8.3 |
linkTestTimeout********* THIS OBJECT IS OBSOLETE *********
The time interval over which a link test response
must be received, or the test is counted as
failed.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects.rwobsolete TimeTicks -- .1.3.6.1.4.1.11.2.14.1.8.4 |
icf8023MacTable********* THIS OBJECT IS OBSOLETE *********
A list of icf8023Mac entries.obsolete SEQUENCE OF Icf8023MacEntry .1.3.6.1.4.1.11.2.14.1.9 |
icf8023MacIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
port to which this entry is applicable. The port
identified by a particular value of this index on
a hub is the same port as identified by the same
value of rptrPortIndex. Note that since this hub
always has exactly 1 port group, there is no group
index for this table. For a bridge, the port
identified by a particular value of this index is
the same port identified by the same value of
ifIndex.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.1.9.1 |
icf8023MacInBroadcastPkts********* THIS OBJECT IS OBSOLETE *********
Count of the broadcast packets received.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.2 |
icf8023MacOutBroadcastPkts********* THIS OBJECT IS OBSOLETE *********
Count of the broadcast packets transmitted.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.3 |
icf8023MacInMulticastPkts********* THIS OBJECT IS OBSOLETE *********
Count of the multicast packets received.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.4 |
icf8023MacOutMulticastPkts********* THIS OBJECT IS OBSOLETE *********
Count of the multicast packets transmitted.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.5 |
icf8023MacRunts********* THIS OBJECT IS OBSOLETE *********
The number of media frames encountered that were
too short (by ethernet/802.3 standards).roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.6 |
icf8023MacGiants********* THIS OBJECT IS OBSOLETE *********
The number of media frames encountered that were
too long (by ethernet/802.3 standards).roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.7 |
icf8023MacMissedPktErrors********* THIS OBJECT IS OBSOLETE *********
The number of frames lost due to lack of
resources (e.g. ring buffers, memory buffers,
etc).roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.8 |
icf8023MacExcessDeferrals********* THIS OBJECT IS OBSOLETE *********
The number of times a frame could not be sent due
to excess deferrals because another node was
transmitting continually.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.9 |
icf8023MacTotalMediaErrors********* THIS OBJECT IS OBSOLETE *********
Count of all possible medium transmit and receive
errors, such as crc, alignment, sequence, length,
excess etc. The purpose of this object is to
support aggregate LAN medium errors for event
processing. Collisions and runts are not
considered an error.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.10 |
icf8023MacSpuriousIntrs********* THIS OBJECT IS OBSOLETE *********
The number of times that the network interface
for this port generated a spurious hardware
interrupt. A non-zero value for this object
indicates a potential hardware problem.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.1.9.11 |
icfDownload OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.10 |
icfDownloadAddress OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.10.1 |
icfDownloadIpAddress********* THIS OBJECT IS OBSOLETE *********
The IP address of the TFTP server to download
firmware from.rwobsolete IpAddress .1.3.6.1.4.1.11.2.14.1.10.1.1 |
icfDownloadIpxAddress********* THIS OBJECT IS OBSOLETE *********
The IPX address of the TFTP server to download
firmware from.rwobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.1.10.1.2 |
icfDownloadFilename********* THIS OBJECT IS OBSOLETE *********
Filename and path of file to download (maximum
length of 63 characters + NULL).rwobsolete DisplayString .1.3.6.1.4.1.11.2.14.1.10.2 |
icfCommonAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.11 |
icfEtwistMibThis MIB module describes devices in the HP
Integrated Communication Facility product
line. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.1.11.1 |
icfETwistConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.11.2 |
icfETCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.11.2.1 |
icfETGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.1.11.2.2 |
hubThinlanFault********* THIS OBJECT IS OBSOLETE *********
When set to 'true' this object causes the Fault
LED to blink if the ThinLan Port is segmented.rwobsolete Integer32 -- INTEGER { -- false(0), -- true(1) --} .1.3.6.1.4.1.11.2.14.2.1 |
hubGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.2.2 |
hubGlobalErrors********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each packet with
an error received on any port. This counter does
not include runts, as they are a normal media
condition.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.1 |
hubGlobalCollisions********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each collision
between any two or more ports (or AUI) detected by
the hub.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.2 |
hubGlobalPktFragments********* THIS OBJECT IS OBSOLETE *********
This counter is the sum of hubPortPktFragments
for all ports.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.3 |
hubGlobalRunts********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each runt frame
received on any port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.4 |
hubGlobalGiants********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each giant frame
received on any port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.5 |
hubGlobalCrcErrors********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each frame with a
CRC error received on any port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.6 |
hubGlobalAlignmentErrors********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each frame with
an alignment error received on any port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.7 |
hubGlobalInOctets********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each octet
received on any port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.8 |
hubGlobalInUcastPkts********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each unicast
packet received on any port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.9 |
hubGlobalInNUcastPkts********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each non-unicast
packet received on any port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.10 |
hubGlobalInBroadcastPkts********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each broadcast
packet received on any port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.2.11 |
hubPortTable********* THIS OBJECT IS OBSOLETE *********
A list of hubPort entries.obsolete SEQUENCE OF HubPortEntry .1.3.6.1.4.1.11.2.14.2.3 |
hubPortIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
port to which this entry is applicable. The port
identified by a particular value of this index is
the same port as identified by the same value of
rptrPortIndex.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.3.1 |
hubPortPktFragments********* THIS OBJECT IS OBSOLETE *********
This counter is incremented when a packet or
packet fragment is encountered for a port
instance.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.3.2 |
hubPortCollisions********* THIS OBJECT IS OBSOLETE *********
This counter is incremented when a port is
involved in a collision.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.2.3.3 |
hubPortSegmentation********* THIS OBJECT IS OBSOLETE *********
This is a flag which is 'true' if the port is
currently segmented and 'false' otherwise.roobsolete Integer32 -- INTEGER { -- false(0), -- true(1) --} .1.3.6.1.4.1.11.2.14.2.3.4 |
hubPortLinkBeatStatus********* THIS OBJECT IS OBSOLETE *********
This is a flag which is 'true' if link beat is
detected on the port and 'false' otherwise. The
value of this variable will always be 'true' when
the corresponding instance of
hubPortLinkBeatEnable is 'false'.roobsolete Integer32 -- INTEGER { -- false(0), -- true(1) --} .1.3.6.1.4.1.11.2.14.2.3.5 |
hubPortLinkBeatEnable********* THIS OBJECT IS OBSOLETE *********
When this flag is set to 'true' the port's link
beat is enabled and when set to 'false' it is
disabled.rwobsolete Integer32 -- INTEGER { -- false(0), -- true(1) --} .1.3.6.1.4.1.11.2.14.2.3.6 |
hubPortMacAddress********* THIS OBJECT IS OBSOLETE *********
Each port maintains the MAC address of the node
currently attached to it. This address is valid
only when the port state flag is set to
'psSingle'.roobsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.2.3.7 |
hubPortAddressState********* THIS OBJECT IS OBSOLETE *********
The port state object may take on three values.
'psNone' means no packets have been received on
the port. 'psSingle' means all packets received on
the port have originated from a single MAC
address. 'psMany' means that packets originating
from more than one node have been received on the
port. To (re)start a search for a MAC address set
the port state to 'psNone'.rwobsolete Integer32 -- INTEGER { -- psNone(0), -- psSingle(1), -- psMany(2) --} .1.3.6.1.4.1.11.2.14.2.3.8 |
hubPortPolarityReversed********* THIS OBJECT IS OBSOLETE *********
This object is used to indicate that the hub port
was wired with the positive/negative polarity of
its transmit and receive pairs reversed. Note
that the port will continue to operate in this
state, with the hub inverting the polarity
internally.roobsolete Integer32 -- INTEGER { -- false(0), -- true(1) --} .1.3.6.1.4.1.11.2.14.2.3.9 |
hubPortLateEventDisable********* THIS OBJECT IS OBSOLETE *********
This object indicates that the hub port was
disabled as a result of excessive late collisions
being caused by the end node attached to this
port. This flag is cleared when the port is
reenabled by setting rptrPortAdminStatus to
'enabled'.roobsolete Enumeration .1.3.6.1.4.1.11.2.14.2.3.10 |
hubBitmaps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.2.4 |
hubPortsOperStatus********* THIS OBJECT IS OBSOLETE *********
The hubPortsOperStatus is a bit map of the state
of all hub ports. The object has a 1 bit for each
port that is enabled, not segmented, and linkbeat
is detected. Ports on which these conditions are
not true have a 0 bit. The bits are placed into
the OCTET STRING in the following order:
octet 0 octet 1 octet 2 ...
bits 7-0 bits 7-0 bits 7-0 ...
ports 1-8 ports 9-16 ports 17-24 ...
Values of unused bits in the last octet are
undefined.roobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.2.4.1 |
hubAddressTableMaxAge********* THIS OBJECT IS OBSOLETE *********
The hubAddressTableMaxAge is the time beyond
which an inactive MAC address will be removed from
the hubPortMacAddress table and the
hubAddressTable. Although hubAddressTableMaxAge
is specified in units of 10ms time ticks, the
actual resolution of this timer is 10 seconds. A
value of 65535000 indicates no aging shall take
place.rwobsolete TimeTicks -- .1.3.6.1.4.1.11.2.14.2.5 |
hubAddressTable********* THIS OBJECT IS OBSOLETE *********
A list of entries present in the hub address
table.obsolete SEQUENCE OF HubAddressEntry .1.3.6.1.4.1.11.2.14.2.6 |
hubAddressIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
chunk to which this entry is applicable.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.6.1 |
hubAddressChunk********* THIS OBJECT IS OBSOLETE *********
The hubAddressChunk object returns an opaque
chunk of the address table. Each chunk can be
interpreted as an array of records in the form:
mac address [6 bytes], port number [2 bytes],
inactivity time [4 bytes]
On a Get, the returned chunk can include empty
(unused) entries. Instances are chunk numbers,
which start at 1 and go to 52. Each chunk can
hold 34 addresses.
A returned chunk might look like:
Address Port Inactivity Time
080009001234 1 0
080009002345 2 10000
080009003456 1 20000
000000000000 1 0
080009009876 EMPTY 0
080009004567 EMPTY 15000
.
.
.
080009005678 EOL 959000
A value of EMPTY in the Port field indicates an
unused (i.e. aged out) entry in the table. When
the EOL (End Of List) bit is set in the Port
field, that entry is the last entry in the table.
It is possible for EOL to be seen in any entry.
EOL (0x4000) and EMPTY (0x8000) are bit masks
which are ORed with the port number in the port
field of the entry. It is possible for both the
EOL and EMPTY bits to be set in the same entry.
The remainder of the chunk after the EOL entry
will be zeroed.
The inactivityTime and Address fields are
meaningless if the EMPTY bit is set in the Port
field. In this case, inactivityTime and Address
are not guaranteed to be zeroed. The Manager may
start with any chunk it likes and request the
chunks in any order. It may perform multiple
requests for the same chunk. The agent does not
save state from previous requests.
A request of chunk #1 would return the contents of
the first 34 address table entries, whether they
are all full, all empty, or some full and the rest
empty. A request of chunk #2 will return entries
#35 through #68. And so on.
The address table can change between Get requests.
An address' location can change, or an address
could age out and then be added back in at a
different location in the table. Thus, the
Manager could see the address twice in the table.roobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.2.6.2 |
hubNumBkpLinks********* THIS OBJECT IS OBSOLETE *********
The number of backup links configurable on this
hub.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.7 |
hubBkpLinkTable********* THIS OBJECT IS OBSOLETE *********
A list of backup link configuration entries. For
a given backup link, the hub will periodically
send a test packet to the device at the end of the
link. If there are no responses (the number is
configurable), the hub will enable the backup port
and disable the primary port. After the primary
link is fixed, the user must turn the primary port
on to resume normal operation.
At any time, the management station can look at
rptrPortAdminStatus for the backup port to
determine if it is currently in use.
The backup link algorithm enables and disables the
backup port by modifying rptrPortAdminStatus for
that port. After the backup port has been enabled
by the backup link algorithm, if the primary port
is subsequently enabled via the hub console port
or by a set of rptrPortAdminStatus, the backup
port will be turned off and the periodic test
packets will begin again.
When the backup link objects are set, the backup
port will be turned off, the primary port will be
turned on, and the periodic test packets will be
sent. The time between test packets is
configurable by setting hubBackupTestTime. The
number of failures needed to switch to the backup
link is configured by setting
hubBackupConsecutiveFails. The backup link
function can be turned off by setting
hubBackupPort to 0.
All five of the backup link objects must be set
together in a single PDU except for the case of
setting hubBackupPort to 0, in which case, the
hubBackupPort can be set without setting the other
objects. Currently, the size of the backup link
table is one; future releases may provide the
ability to monitor more than one backup link.obsolete SEQUENCE OF HubBkpLinkEntry .1.3.6.1.4.1.11.2.14.2.8 |
hubBkpLinkIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
backup link configuration entry to which the
instance is applicable.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.8.1 |
hubBackupPort********* THIS OBJECT IS OBSOLETE *********
The port number of the backup link. Setting this
object to zero removes the backup link
configuration.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.8.2 |
hubPrimaryPort********* THIS OBJECT IS OBSOLETE *********
The port number of the primary link. It can only
be set to zero if the hubBackupPort is also zero.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.8.3 |
hubBackupAddress********* THIS OBJECT IS OBSOLETE *********
The MAC address of the device at the other end of
the primary link which will respond to the
periodic test packets sent by this hub.rwobsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.2.8.4 |
hubBackupTestTime********* THIS OBJECT IS OBSOLETE *********
The frequency, in time ticks, between sending the
periodic test packets. The actual resolution of
this timer is in seconds. The test packet
response timeout is fixed at 500ms.rwobsolete TimeTicks -- .1.3.6.1.4.1.11.2.14.2.8.5 |
hubBackupConsecutiveFails********* THIS OBJECT IS OBSOLETE *********
The number of test packet failures which will
cause the hub to switch to the backup link (i.e.,
backup port turned on, primary port turned off).
A value of one is generally not recomended and
will cause the backup link to be enabled upon the
first failure.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.8.6 |
hubSqeEnabled********* THIS OBJECT IS OBSOLETE *********
When 'true', this flag indicates that SQE has
been detected for the last ten agent transmits and
there is a high probability that the SQE switch on
the transceiver attached to the AUI port is set to
Enabled, when it should be Disabled.roobsolete Integer32 -- INTEGER { -- false(0), -- true(1) --} .1.3.6.1.4.1.11.2.14.2.9 |
hubAddressMoveLogTable********* THIS OBJECT IS OBSOLETE *********
A log of the 20 most recent times that the agent
detected that a source MAC address which had been
heard on one port had moved to a different port.obsolete SEQUENCE OF HubAddressMoveLogEntry .1.3.6.1.4.1.11.2.14.2.11 |
hubAddressMoveLogEntry********* THIS OBJECT IS OBSOLETE *********
A row in the hubAddressMoveLogTable containing
information about a single address movement.obsolete HubAddressMoveLogEntry .1.3.6.1.4.1.11.2.14.2.11.1 |
hubAddrMoveIndex********* THIS OBJECT IS OBSOLETE *********
The index of this entry in the address movement
log table. Index 1 will always contain the oldest
entry. If the table is full when a new address
movement occurs, the new entry becomes index 20,
and all earlier entries are shifted down by one
entry, removing the old index 1.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.11.1.1 |
hubAddrMoveAddress********* THIS OBJECT IS OBSOLETE *********
The MAC address of the station that moved to a
new port.roobsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.2.11.1.2 |
hubAddrMoveOldGroup********* THIS OBJECT IS OBSOLETE *********
The group containing the port on which this
address had been operating before it moved.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.11.1.3 |
hubAddrMoveOldPort********* THIS OBJECT IS OBSOLETE *********
The port within the group on which this address
had been operating before it moved.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.11.1.4 |
hubAddrMoveNewGroup********* THIS OBJECT IS OBSOLETE *********
The group containing the port that the address
moved to.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.11.1.5 |
hubAddrMoveNewPort********* THIS OBJECT IS OBSOLETE *********
The port within the group that the address moved
to.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.2.11.1.6 |
hubLateEventMonitor********* THIS OBJECT IS OBSOLETE *********
This object configures the late event monitoring
functionality for the hub. This mode periodically
samples the rptrMonitorPortLateEvents value for
each port. If the agent detects excessive late
events on a port, the port will be disabled by
setting the rptrPortAdminStatus for that port to
'disabled', and the hubPortLateEventDisable flag
for that port will be set to 'true'. This mode is
'off' by default. Setting it to 'onSingle'
enables the mode for all non-cascaded hub ports.
Setting it to 'onAll' enables the mode for all hub
ports, including cascaded ports.rwobsolete Enumeration .1.3.6.1.4.1.11.2.14.2.12 |
operationalState********* THIS OBJECT IS OBSOLETE *********
This object controls the forwarding nature of the
bridge. In the Learning state the bridge will
learn new MAC addresses, and it ages out older MAC
addresses. Statically configured addresses are
discarded (they do not age). In the Secure state,
the bridge will not learn new MAC addresses.
Statically configured addresses are forwarded
(they do not age).rwobsolete Integer32 -- INTEGER { -- learning(0), -- secure(1) --} .1.3.6.1.4.1.11.2.14.3.1 |
forwardDbMaxAge********* THIS OBJECT IS OBSOLETE *********
The value of this object controls how long a MAC
address stays in the forwarding database. See
802.1d, section 3.9.2 'Dynamic Entries'.rwobsolete TimeTicks -- .1.3.6.1.4.1.11.2.14.3.2 |
addressTable********* THIS OBJECT IS OBSOLETE *********
A list of address entries.obsolete SEQUENCE OF AddressEntry .1.3.6.1.4.1.11.2.14.3.3 |
addressIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
chunk to which this entry is applicable.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.3.1 |
addressChunk********* THIS OBJECT IS OBSOLETE *********
This object returns an opaque chunk of the
address table. The instance specifies a chunk of
the address table. Each chunk can be interpreted
as an array of 41 records of the form:
{ macAddress[6bytes], port number[2bytes],
permanence[2bytes] }.
Address Port Perm
00 080009001234 1 Dynamic(0x0000)
01 080009002345 2 Dynamic(0x0000)
02 000000000000 EMPTY(0x8000) Dynamic(0x0000)
03 080009003456 1 Dynamic(0x0000)
04 000000000000 1 Dynamic(0x0000)
05 080009009876 EMPTY(0x8000) Dynamic(0x0000)
06 080009004567 EMPTY(0x8000) Static(0x0008)
07 080009041d08
... ... ...
40 080009005678 EOL(0x4000) Permanent(0x0000)
A value of EMPTY in the Port field indicates an
aged out table entry. A value of EOL in the Port
field indicates that it is the last entry in the
table. Of course, EOL will only be seen in the
last entry. EOL and EMPTY are AND-able bit
fields. The Disposition and Address are
meaningless if Port is EMPTY.
When instance=1 is used on a Set, the agent clears
the table prior to setting any addresses. On
subsequent Sets, the agent adds the specified
addresses. If a Set starts at instance > 1, the
specified addresses will be added to the table
without first clearing the table. Addresses are
already in the table are deleted and then
readded.rwobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.3.3.2 |
brgPortTable********* THIS OBJECT IS OBSOLETE *********
A list of brgPort entries.obsolete SEQUENCE OF BrgPortEntry .1.3.6.1.4.1.11.2.14.3.4 |
brgPortIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
interface/port to which this entry is applicable.
The interface/port identified by a particular
value of this index is the same interface/port as
identified by the same value of ifIndex.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.4.1 |
brgPortCacheHits********* THIS OBJECT IS OBSOLETE *********
Count of the successful cache matches when
looking up a destination MAC address.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.4.2 |
brgPortCacheMisses********* THIS OBJECT IS OBSOLETE *********
Count of the unsuccessful cache matches when
looking up a destination MAC address.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.4.3 |
brgPortForwardedPkts********* THIS OBJECT IS OBSOLETE *********
Count of the packets received on this port and
forwarded to the other port.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.4.4 |
brgPortFilteredPkts********* THIS OBJECT IS OBSOLETE *********
Count of the frames that were received on this
port and filtered.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.4.5 |
wildcardTable********* THIS OBJECT IS OBSOLETE *********
A list of wildcard entries.obsolete SEQUENCE OF WildcardEntry .1.3.6.1.4.1.11.2.14.3.5 |
wildcardIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
interface/port to which this entry is applicable.
The interface/port identified by a particular
value of this index is the same interface/port as
identified by the same value of ifIndex.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.5.1 |
wildcardFilter********* THIS OBJECT IS OBSOLETE *********
This object contains the binary value used to
filter frames. The data in the frame at the offset
specified by the Wildcard offsets is XOR'ed with
this object after AND'ing with the Wildcard Mask.
If zero result occurs, the packet is discarded
(filtered).
Suppose the user specifies the following values:
data: 11001010 10101010 10101010 10101010
mask: 11100000 00000000 00000000 00000000
filter: 11100000 00000000 00000000 00000000
AND'ing data with the mask gives:
11000000 00000000 00000000 00000000
XOR'ing that value with the filter gives:
00100000 00000000 00000000 00000000
The non-zero result indicates no match (don't
discard).
Another example:
data: 10011010 10101010 10101010 10101010
mask: 10010000 00000000 00000000 00000000
filter: 10010000 00000000 00000000 00000000
AND'ing data with the mask gives:
10010000 00000000 00000000 00000000
XOR'ing that value with the filter gives:
00000000 00000000 00000000 00000000
A zero result indicates a match, so we discard
(filter) the packet.
The filter AND'ed with the mask must equal the
filter. This is an example of a legal filter/mask
pair:
filter: 00010000 00000000 00000000 00000000
mask: 10010000 00000000 00000000 00000000
AND'ed: 00010000 00000000 00000000 00000000
(equals filter)
Another way of saying this: if a mask bit is zero,
the corresponding filter bit must be zero.
The following would be an illegal pair:
filter: 01110000 00000000 00000000 00000000
mask: 10010000 00000000 00000000 00000000
AND'ed: 00010000 00000000 00000000 00000000
( != filter)rwobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.3.5.2 |
wildcardMask********* THIS OBJECT IS OBSOLETE *********
This object indicates which portion of the
wildcardFilter is to be used in filtering. The
data in the frame at the offset specified by
Wildcard offsets is AND'ed with this object. The
result is XOR'ed with the Wildcard Filter object.
If a zero result is obtained, the packet is
discarded.
If an all-zeros wildcardMask is specified, a
genErr is returned. Also, see mask/filter
constraints in the description of the
wildcardFilter object.rwobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.3.5.3 |
wildcardOffset********* THIS OBJECT IS OBSOLETE *********
Indicates the position in a received frame which
is to have the Wildcard Mask/Filter applied. The
indicated packet byte is aligned with the 0th byte
of the wildcard mask/filter held in network byte
order.
The MAC destination address starts at byte
position (wildcardOffset) zero.
The wildcardOffset must fall on a 2-byte boundary,
0,2,4,...,1512 (violations of this constraint
result in a genErr). Filters can be aligned on
non 2-byte boundaries through use of the
wildcardUserOffset.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.5.4 |
wildcardUserOffset********* THIS OBJECT IS OBSOLETE *********
This value is a byte offset from the beginning
of the packet. If this offset is such that any
portion of the filter extends past the end of the
packet (for wildcard filtering purposes, the FCS
is part of the packet), then the filter is
considered not to match, and the packet is not
filtered.
For a particular filter, the wildcardUserOffset
must be greater than or equal to the
wildcardOffset.
wildcardUserOffset must be between 0 and 1514,
inclusive.
The wildcardUserOffset, wildcardOffset pair must
conform to one of the following four relationships
and also be subject to the range restrictions
listed above. For n = 0,..,378
Offset 4n 4n 4n 4n+2
UserOffset 4n 4n+1 4n+2 4n+3
As an example, consider four examples in the
following table for locating the filter at or near
the beginning of a packet:
- 6 filter/mask bytes - - desired -
0 1 2 3 4 5 6 - position -
A|f/m0 f/m1 f/m2 f/m3 00 00 00 |0,4,8,12,...
B| 00 f/m0 f/m1 f/m2 f/m3 00 00 |1,5,9,13,...
C| 00 00 f/m0 f/m1 f/m2 f/m3 00 |2,6,10,14,...
D| 00 00 00 f/m0 f/m1 f/m2 f/m3|3,7,11,15,...
Example A corresponds to a UserOffset/Offset pair
such as 0/0 (4n/4n). Example B represents a pair
such as 0/1 (4n/4n+1). Example C is 0/2
(4n/4n+2). Finally, example D is 2/3 (4n+2/4n+3).
If any of the above constraints is not honored,
the SET Response will indicate genErr.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.5.5 |
wildcardArm********* THIS OBJECT IS OBSOLETE *********
This object arms (enables) the Wildcard Filter
provided all of the other wildcard objects have
been set to proper values. To disarm a wildcard,
only the wildcardArm object need be set.rwobsolete Integer32 -- INTEGER { -- off(0), -- on(1) --} .1.3.6.1.4.1.11.2.14.3.5.6 |
stp OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.3.6 |
stpBridgeId********* THIS OBJECT IS OBSOLETE *********
A 64 bit binary bridge id composed of bridge
priority and the bridge's mac address fields. see:
IEEE 802.1(d) 6.8.1.1.3(1), 4.5.3.7roobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.3.6.1 |
stpTopoChangeTime********* THIS OBJECT IS OBSOLETE *********
The time since the last topology change. see:
IEEE 802.1(d) 6.8.1.1.3(2), 4.5.3.12roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.3.6.2 |
stpTopoNumChanges********* THIS OBJECT IS OBSOLETE *********
The number of topo changes since initialization
of STP. see: IEEE 802.1(d) 6.8.1.1.3(3)roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.6.3 |
stpTopoChange********* THIS OBJECT IS OBSOLETE *********
A 1 bit flag broadcast by the root bridge
indicating that a topology change is underway, and
Stp bridges should use short term aging. see: IEEE
802.1(d) 6.8.1.1.3(4), 4.5.3.12roobsolete Integer32 -- INTEGER { -- false(0), -- true(1) --} .1.3.6.1.4.1.11.2.14.3.6.4 |
stpDesignatedRoot********* THIS OBJECT IS OBSOLETE *********
The binary bridge id that this bridge believes to
be the root bridge for the bridged Lan. see: IEEE
802.1(d) 6.8.1.1.3(5), 4.5.3.1roobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.3.6.5 |
stpRootCost********* THIS OBJECT IS OBSOLETE *********
The cost of the path to the root bridge from this
bridge; equal to the sum of the designated cost
and the path cost held for the root port. see:
IEEE 802.1(d) 6.8.1.1.3(6), 4.5.3.2roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.6 |
stpRootPort********* THIS OBJECT IS OBSOLETE *********
The port id that this bridge believes to be the
root bridge's root port for the bridged Lan. see:
IEEE 802.1(d) 6.8.1.1.3(7), 4.5.3.3roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.7 |
stpCurrentMaxAge********* THIS OBJECT IS OBSOLETE *********
The Max Age value received from the Root Bridge
(in seconds); the Stp is currently using the
value. see: IEEE 802.1(d) 6.8.1.1.3(8), 4.5.3.4roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.8 |
stpCurrentHelloTime********* THIS OBJECT IS OBSOLETE *********
The Hello time value received from the Root
Bridge (in seconds); the Stp records the value.
see: IEEE 802.1(d) 6.8.1.1.3(9), 4.5.3.5roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.9 |
stpCurrentForwardDelay********* THIS OBJECT IS OBSOLETE *********
The forward delay value received from the Root
Bridge (in seconds); the Stp is currently using
the value. see: IEEE 802.1(d) 6.8.1.1.3(10),
4.5.3.6roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.10 |
stpMaxAge********* THIS OBJECT IS OBSOLETE *********
The maximum age allowed of Config information for
a port before a bridge will attempt to become the
root (in seconds). Transmitted by this bridge when
it is, or is attempting to become the root. see:
IEEE 802.1(d) 6.8.1.1.3(11), 6.8.1.2.2(1),
4.5.3.8rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.11 |
stpHelloTime********* THIS OBJECT IS OBSOLETE *********
The time between Config packet transmission when
this bridge is, or is attempting to become the
root (in seconds). Transmitted by this bridge when
it is, or is attempting to become the root. see:
IEEE 802.1(d) 6.8.1.1.3(12), 6.8.1.2.2(2),
4.5.3.9rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.12 |
stpForwardDelay********* THIS OBJECT IS OBSOLETE *********
The time spent in the Listening and Learning
states used when this bridge is, or is attempting
to become the root (in seconds). Transmitted by
this bridge when it is, or is attempting to become
the root. see: IEEE 802.1(d) 6.8.1.1.3(13),
6.8.1.2.2(3), 4.5.3.10rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.13 |
stpPriority********* THIS OBJECT IS OBSOLETE *********
The upper 16 bits of the 64 bit BridgeId composed
of priority and the bridge's mac address fields.
see: IEEE 802.1(d) 6.8.1.2.2(4), 4.5.3.7rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.14 |
stpPortTable********* THIS OBJECT IS OBSOLETE *********
A list of stpPort entries.obsolete SEQUENCE OF StpPortEntry .1.3.6.1.4.1.11.2.14.3.6.15 |
stpPortIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
port to which this entry is applicable. The port
identified by a particular value of this index is
the same interface/port as identified by the same
value of ifIndex. Not an IEEE 802.1(d) reqmt.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.15.1 |
stpPortState********* THIS OBJECT IS OBSOLETE *********
The state of a port on a 2 port bridge is really
the state of the bridge itself. Management is only
allowed to set this object to 'stpDisabled' or
'stpBlocking'. Setting the object to 'stpDisabled'
will turn off spanning tree only if the state is
not 'stpBlocking' (to prevent loops). Setting the
object to 'stpBlocking' will turn on spanning tree
only if it was previously disabled. see: IEEE
802.1(d) 6.8.2.1.3(2), 4.4, 4.5.5.2rwobsolete Integer32 -- INTEGER { -- stpDisabled(0), - settable -- stpListening(1), -- stpLearning(2), -- stpForwarding(3), -- stpBlocking(4) - settable --} .1.3.6.1.4.1.11.2.14.3.6.15.2 |
stpPortId********* THIS OBJECT IS OBSOLETE *********
The 16 bit port id composed of priority and the
port's unique id fields. see: IEEE 802.1(d)
6.8.2.1.3(3), 4.5.5.1roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.15.3 |
stpPortPathCost********* THIS OBJECT IS OBSOLETE *********
The contribution of the path through this port,
when the port is the root port, to the total cost
of the path to the root for this bridge. see: IEEE
802.1(d) 6.8.2.1.3(4), 6.8.2.3.2(2), 4.5.5.3rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.15.4 |
stpPortRootId********* THIS OBJECT IS OBSOLETE *********
The bridge id that this port believes to be the
root bridge for the bridged Lan. see: IEEE
802.1(d) 6.8.2.1.3(5), 4.5.5.4roobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.3.6.15.5 |
stpPortDesignatedCost********* THIS OBJECT IS OBSOLETE *********
The cost of the path to the root offered by the
Designated Port on the LAN to which this Port is
attached. see: IEEE 802.1(d) 6.8.2.1.3(6),
4.5.5.5roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.15.6 |
stpPortDesignatedBridge********* THIS OBJECT IS OBSOLETE *********
The Bridge Id of the designated bridge for the
LAN associated with the port. see: IEEE 802.1(d)
6.8.2.1.3(7), 4.5.5.6roobsolete OCTET STRING .1.3.6.1.4.1.11.2.14.3.6.15.7 |
stpPortDesignatedPort********* THIS OBJECT IS OBSOLETE *********
The port id of the bridge believed to be the
designated port of the LAN associated with the
port. see: IEEE 802.1(d) 6.8.2.1.3(8), 4.5.5.7roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.15.8 |
stpPortPriority********* THIS OBJECT IS OBSOLETE *********
The upper 8 bits of the 16 bit PortId composed of
priority and the port's unique id fields. see:
IEEE 802.1(d) 6.8.2.3.2(3), 4.5.5.1rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.6.15.9 |
hdlcErrorTable********* THIS OBJECT IS OBSOLETE *********
A list of hdlcError entries.obsolete SEQUENCE OF HdlcErrorEntry .1.3.6.1.4.1.11.2.14.3.7 |
hdlcErrorIndex********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
port to which this entry is applicable. The port
identified by a particular value of this index is
the same interface/port as identified by the same
value of ifIndex. IcfBridge.HP28674: There is only
one 'real' instance of this object on port 2.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.7.1 |
hdlcErrorIndications********* THIS OBJECT IS OBSOLETE *********
Errors occurring during information transfer
which required instruction from CPU for recovery.
This is a serious link problem. The local node
will either reset or disconnect after receiving
this message.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.2 |
hdlcT1Timeouts********* THIS OBJECT IS OBSOLETE *********
The number of times the retransmission timer
(x25T1Timer) timed out.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.3 |
hdlcMissedPackets********* THIS OBJECT IS OBSOLETE *********
Count of the frames lost by the receiver because
there wasn't a receive buffer.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.4 |
hdlcRcvOverruns********* THIS OBJECT IS OBSOLETE *********
Count of the number of times the reciever's FIFO
was full when the receiver was ready to put new
data into the FIFO.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.5 |
hdlcXmtUnderruns********* THIS OBJECT IS OBSOLETE *********
Count of the number of times the transmitter has
aborted a frame transmission because data was
late from memory.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.6 |
hdlcProviderLostPrimitives********* THIS OBJECT IS OBSOLETE *********
Count of the number of lost control frames due to
802.3 priority processing on receive.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.7 |
hdlcRuntFrameReceives********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC frames received that were less
than the minimum legal HDLC size.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.8 |
hdlcGiantFrameReceives********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC frames received that were
larger than the maximum legal size that can be
sent on the 802.3 LAN link.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.9 |
hdlcBadFrameReceives********* THIS OBJECT IS OBSOLETE *********
Count of the sum of: HDLC frames with bad
checksum, and misaligned HDLC frames.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.10 |
hdlcRejectFrameReceives********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC reject frames received.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.11 |
hdlcRejectFrameSends********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC reject frames sent.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.12 |
hdlcFrameRejectFrameRecs********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC frame reject frames (FRMR)
received.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.7.13 |
hdlcLocalTable********* THIS OBJECT IS OBSOLETE *********
A list of hdlcLocal entries.obsolete SEQUENCE OF HdlcLocalEntry .1.3.6.1.4.1.11.2.14.3.8 |
hdlcLocalIndex********* THIS OBJECT IS OBSOLETE *********
Index into Hdlc local statistics table on a per
port basis. bridge.HP28674: There is only one
'real' instance of this object on port 2.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.8.1 |
hdlcLocalResetRequests********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC requests to reset current
logical link.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.8.2 |
hdlcLocalResetConfirms********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node link reset
confirmations.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.8.3 |
hdlcLocalConnectRequests********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node attempts to establish
logical link.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.8.4 |
hdlcLocalConnectConfirms********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node connect request
acceptances.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.8.5 |
hdlcLocalDisconnectRequests********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node disconnect requests.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.8.6 |
hdlcLocalDisconnectConfirms********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node disconnects granted.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.8.7 |
hdlcLocalState********* THIS OBJECT IS OBSOLETE *********
Current local HDLC operational state.roobsolete Integer32 -- INTEGER { -- t1HdlcStateNormal(0), -- t1HdlcStateBusy(1), -- t1HdlcStateRejectSent(2), -- t1HdlcStateDiscSent(3), -- t1HdlcStateDisconnect(4), -- t1HdlcStateConnSent(5), -- t1HdlcStateFrameRejectSent(6), -- t1HdlcStateResetSent(7), -- t1HdlcStateErrorIndication(8) --} .1.3.6.1.4.1.11.2.14.3.8.8 |
hdlcLocalAddress********* THIS OBJECT IS OBSOLETE *********
The local HDLC address during communication with
the remote node. This object is valid only if a
brouter is on the remote end of the HDLC link. It
can only be set to one of the two values:
'hdlcDTEAddress' or 'hdlcDTEAddress'. Furthermore,
the setting of this object must be different from
the setting of the hdlcRemoteHdlcAddress object.
This object, along with hdlcRemoteAddress and
hdlcRemoteNodeId, constitute a superobject. See
hdlcRemoteNodeId for more details.rwobsolete Enumeration .1.3.6.1.4.1.11.2.14.3.8.9 |
hdlcLocalPhase********* THIS OBJECT IS OBSOLETE *********
Current HDLC operational phase.roobsolete Integer32 -- INTEGER { -- t1PhaseStopped(-1), -- t1PhaseInfo(0), -- t1PhaseDisconnect(1), -- t1PhaseReset(2), -- t1PhaseTransparentData(3) --} .1.3.6.1.4.1.11.2.14.3.8.10 |
hdlcRemoteTable********* THIS OBJECT IS OBSOLETE *********
A list of hdlcRemote entries.obsolete SEQUENCE OF HdlcRemoteEntry .1.3.6.1.4.1.11.2.14.3.9 |
hdlcRemoteIndex********* THIS OBJECT IS OBSOLETE *********
Index into Hdlc remote statistics table on a per
port basis. bridge.HP28674: There is only one
'real' instance of this object on port 2.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.9.1 |
hdlcRemoteResetRequests********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC requests to reset current
logical link.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.2 |
hdlcRemoteResetConfirms********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC node link reset
confirmations.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.3 |
hdlcRemoteConnectRequests********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC node attempts to establish
logical link.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.4 |
hdlcRemoteConnectConfirms********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC node connect request
acceptances.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.5 |
hdlcRemoteDisconnectRequests********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC node disconnect requests.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.6 |
hdlcRemoteState********* THIS OBJECT IS OBSOLETE *********
Current remote HDLC operational state.roobsolete Integer32 -- INTEGER { -- t1HdlcStateNormal(0), -- t1HdlcStateBusy(1), -- t1HdlcStateRejectSent(2), -- t1HdlcStateDiscSent(3), -- t1HdlcStateDisconnect(4), -- t1HdlcStateConnSent(5), -- t1HdlcStateFrameRejectSent(6), -- t1HdlcStateResetSent(7), -- t1HdlcStateErrorIndication(8) --} .1.3.6.1.4.1.11.2.14.3.9.7 |
hdlcRemoteAddress********* THIS OBJECT IS OBSOLETE *********
The remote HDLC address during communication with
the local node. This object is valid only if a
brouter is on the remote end of the HDLC link. It
can only be set to one of the two values:
'hdlcDCEAddress' or 'hdlcDTEAddress'. Furthermore,
the setting of this object must be different from
the setting of the hdlcLocalAddress object. This
object, along with hdlcLocalAddress and
hdlcRemoteNodeId, constitute a superobject. See
hdlcRemoteNodeId for more details.rwobsolete Enumeration .1.3.6.1.4.1.11.2.14.3.9.8 |
hdlcRemoteXidCommands********* THIS OBJECT IS OBSOLETE *********
Count of XID commands issued by remote node.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.9 |
hdlcRemoteXidResponses********* THIS OBJECT IS OBSOLETE *********
Count of XID responses issued by remote node.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.10 |
hdlcRemoteTestCommands********* THIS OBJECT IS OBSOLETE *********
Count of Test commands issued by remote node.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.11 |
hdlcRemoteTestResponses********* THIS OBJECT IS OBSOLETE *********
Count of Test responses issued by remote node.roobsolete Counter32 .1.3.6.1.4.1.11.2.14.3.9.12 |
hdlcRemoteNodeId********* THIS OBJECT IS OBSOLETE *********
Identification of the node at the opposite end of
the HDLC link (eg. brouter or bridge). This
object, along with hdlcLocalAddress and
hdlcRemoteAddress, constitute a superobject. This
object may only be set to one of the two values:
'remoteNodeBridge' or 'remoteNodeRouter'. If this
object is set to 'remoteNodeUnknown', then
hdlcLocalAddress and hdlcRemoteAddress need not be
supplied, and will be ignored if provided. In a
get, this object may report 'remoteNodeBridge',
but attempts to set this object to
'remoteNodeBridge' will result in an error pdu
with error type invalidData. If this object is set
to 'remoteNodeRouter', then hdlcLocalAddress and
hdlcRemoteAddress must be present and contiguous
in the pdu in order to properly complete the
superobject. The three objects may be in any order
within the pdu.rwobsolete Integer32 -- INTEGER { -- remoteNodeBridge(0), -- remoteNodeRouter(1), - Settable -- remoteNodeUnknown(2) - Settable --} .1.3.6.1.4.1.11.2.14.3.9.13 |
x25Table********* THIS OBJECT IS OBSOLETE *********
A list of X25 entries.obsolete SEQUENCE OF X25Entry .1.3.6.1.4.1.11.2.14.3.10 |
x25Index********* THIS OBJECT IS OBSOLETE *********
Index into X25 remote timer table on a per port
basis. bridge.HP28674: There is only one 'real'
instance of this object on port 2.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.10.1 |
x25T1Timer********* THIS OBJECT IS OBSOLETE *********
Period of time used to timeout retransmits for
X25.rwobsolete TimeTicks -- .1.3.6.1.4.1.11.2.14.3.10.2 |
x25N2Count********* THIS OBJECT IS OBSOLETE *********
Number of retries to be performed during X.25
communication.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.3.10.3 |
x25T3Timer********* THIS OBJECT IS OBSOLETE *********
Period of idle time before a disconnect is
executed for X25.rwobsolete TimeTicks -- .1.3.6.1.4.1.11.2.14.3.10.4 |
icfConfigIfTable********* THIS OBJECT IS OBSOLETE *********
This table contains per-interface configuration
information that will take effect after the next
reset of the device.obsolete SEQUENCE OF IcfConfigIfEntry .1.3.6.1.4.1.11.2.14.5.1 |
icfConfigIfEntry********* THIS OBJECT IS OBSOLETE *********
An entry in the icfConfigIfTable containing
information about a single interface.obsolete IcfConfigIfEntry .1.3.6.1.4.1.11.2.14.5.1.1 |
icfConfigIfIndex********* THIS OBJECT IS OBSOLETE *********
The index of the interface which this information
contains configuration information for. The
interface identified by a particular value of this
index is the same interface identified by the same
value of ifIndex.roobsolete Integer32 .1.3.6.1.4.1.11.2.14.5.1.1.1 |
icfConfigIfIpAddress********* THIS OBJECT IS OBSOLETE *********
This variable contains the IP address for this
interface which will be used after the next reset
of the device.rwobsolete IpAddress .1.3.6.1.4.1.11.2.14.5.1.1.2 |
icfConfigIfNetMask********* THIS OBJECT IS OBSOLETE *********
This variable contains the IP subnet mask for
this interface which will be used after the next
reset of the device.rwobsolete IpAddress .1.3.6.1.4.1.11.2.14.5.1.1.3 |
icfConfigIfDefaultGate********* THIS OBJECT IS OBSOLETE *********
This variable contains the IP address of the
default router for this interface which will be
used after the next reset of the device.rwobsolete IpAddress .1.3.6.1.4.1.11.2.14.5.1.1.4 |
icfConfigIpTTL********* THIS OBJECT IS OBSOLETE *********
This variable contains the default IP time to
live which will be used after the next reset of
the device.rwobsolete Integer32 .1.3.6.1.4.1.11.2.14.5.2 |
icfConfigBootpEnable********* THIS OBJECT IS OBSOLETE *********
Setting this flag to 'enabled' (the default) will
clear any existing IP address configuration for
this device, and will cause the device to use the
Bootp protocol to obtain its IP configuration
after the next reset. This flag must be set to
'disabled' in order to configure an IP address for
the device. Setting this flag to 'disabled' will
prevent the Bootp protocol from running. Setting
this flag to 'disabled' when there is no IP
address configured will disable the IP protocol
stack on this device.rwobsolete Enumeration .1.3.6.1.4.1.11.2.14.5.3 |