IBSWITCH-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
162
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
162 total| Object Name |
|---|
xrt OBJECT IDENTIFIER .1.3.6.1.3 |
RFC1155-SMI Unknown .1.3.6.1.3 |
commDev OBJECT IDENTIFIER .1.3.6.1.3.2 |
genericSwitch OBJECT IDENTIFIER .1.3.6.1.3.2.2 |
gsw OBJECT IDENTIFIER .1.3.6.1.3.2.2.1 |
gswTopoComTrapThis trap is generated when changes
happen in a SAN. TRAP-TYPE .1.3.6.1.3.2.2.1.0.1 |
gswIBTopoTrapThis trap is generated when changes
happen in an IB subnet. TRAP-TYPE .1.3.6.1.3.2.2.1.0.2 |
gswIBPortTrapThis trap is generated when changes
happen in IB switch ports. TRAP-TYPE .1.3.6.1.3.2.2.1.0.5 |
gswIBSwitchTrapThis trap is generated when changes
happen in IB switches. TRAP-TYPE .1.3.6.1.3.2.2.1.0.8 |
gswEventTrapThis trap is generated when an event whose
level at or below gswEventTrapLevel occurs. TRAP-TYPE .1.3.6.1.3.2.2.1.0.10 |
gswMisc OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.1 |
gswMIBVersionMIB version in textual format.
example:
version 1.0 is represented as 0100
version 1.1 is represented as 0101ro DisplayString .1.3.6.1.3.2.2.1.1.1 |
gswMIBCurrentDateThe current date information of the location
of the MIB in displayable textual format.ro GswDate .1.3.6.1.3.2.2.1.1.2 |
gswSystem OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.2 |
gswNumOfSwitchThe object indicates the number of switches
represented in gswInventoryTable.ro INTEGER .1.3.6.1.3.2.2.1.2.1 |
gswInventoryTableIt is a table that contains entries of
switches in a SAN. A SAN may consist of IB subnets,
FC fabrics, IB-IB routers, and IB-FC edge routers. SEQUENCE OF GswInventoryEntry .1.3.6.1.3.2.2.1.2.2 |
gswInventoryEntryAn entry of the switch information. GswInventoryEntry .1.3.6.1.3.2.2.1.2.2.1 |
gswInventoryTypeThis object is one of two indices used by
gswInventoryTable. This index denotes the type of
interconnect element.ro GswType .1.3.6.1.3.2.2.1.2.2.1.1 |
gswInventoryIdThe object is an index used by
gswInventoryTable. If the gswInventoryType is FC switch
type, the gswInventotyId refers to WWN of the switch. If
the gswInventoryType is IB switch, IB Router or IB-FC Edge
Router, the gswInventoryId refers to GUID of the
interconnect element. Since the index corresponds to
either WWN or GUID assigned to each interconnect element,
it is unique but may not be contiguous.ro GswLocalId .1.3.6.1.3.2.2.1.2.2.1.2 |
gswSwitchNameThe object is the name of the interconnect
element that corresponds to the combination of
gswTypeIndex and gswIdIndex.rw GswOlsName .1.3.6.1.3.2.2.1.2.2.1.7 |
gswSwitchGlobalIdThe object is the unique global ID assigned to
the switch expressed in array of 16 octets. It is the
combination of GUID or WWN and type of an interconnect
element.ro GswGlobalId .1.3.6.1.3.2.2.1.2.2.1.8 |
gswSwitchEIPThis object identifies the ethernet IP
address of the switch.ro NetworkAddress .1.3.6.1.3.2.2.1.2.2.1.9 |
gswSwitchIIPThis object identifies the in-band IP
address of the switch.ro NetworkAddress .1.3.6.1.3.2.2.1.2.2.1.10 |
gswSwitchIGWThis object identifies the in-band gateway IP
address of the switch.ro NetworkAddress .1.3.6.1.3.2.2.1.2.2.1.11 |
gswSwitchSANNameThe object is the name of the SAN the
interconnect element resides in.rw GswOlsName .1.3.6.1.3.2.2.1.2.2.1.12 |
gswSwitchFabricNameThe object is the name of the FC fabric or IB
subnet the interconnect element resides in.rw GswOlsName .1.3.6.1.3.2.2.1.2.2.1.13 |
gswSwitchComTableIt is a table that contains common fields for
entries of switches in a SAN. SAN may consist of IB
subnets, FC fabrics, IB-IB routers, and IB-FC edge
routers. SEQUENCE OF GswSwitchComEntry .1.3.6.1.3.2.2.1.2.3 |
gswSwitchComEntryAn entry of the common switch information. GswSwitchComEntry .1.3.6.1.3.2.2.1.2.3.1 |
gswSwitchSwitchIdThe object is the unique global ID assigned to
the switch expressed in array of 16 octets. It is the
combination of GUID or WWN and type of an interconnect
element.ro GswGlobalId .1.3.6.1.3.2.2.1.2.3.1.1 |
gswSwitchMaxPortNumThis object indicates the maximum number of
ports available on the switch.ro INTEGER .1.3.6.1.3.2.2.1.2.3.1.2 |
gswSensorsNumThe object indicates the number of sensors
inside the switch.ro INTEGER .1.3.6.1.3.2.2.1.2.3.1.3 |
gswCurrentDateThe current date information of the switch in
displayable textual format.ro GswDate .1.3.6.1.3.2.2.1.2.3.1.10 |
gswBootDateThe object is the date and time when the
switch last booted, in displayable textual format.ro GswDate .1.3.6.1.3.2.2.1.2.3.1.11 |
gswFWLastUpdatedThe object indicates the date when the
firmware was last updated, in displayable textual format.ro GswDate .1.3.6.1.3.2.2.1.2.3.1.12 |
gswFlashLastUpdatedThe object indicates the date when the FLASH
was last updated, in displayable textual format.ro GswDate .1.3.6.1.3.2.2.1.2.3.1.13 |
gswBootPromLastUpdatedThe object indicates the date when the boot
PROM was last updated, in displayable textual format.ro GswDate .1.3.6.1.3.2.2.1.2.3.1.14 |
gswFirmwareVersionThe object indicates the current version of
the firmware.ro GswFwVersion .1.3.6.1.3.2.2.1.2.3.1.20 |
gswHWRevisionThe object indicates the current revision of
the hardware.ro DisplayString .1.3.6.1.3.2.2.1.2.3.1.21 |
gswOperStatusThe object indicates the current operational
status of the switch.ro GswSwitchStatus .1.3.6.1.3.2.2.1.2.3.1.22 |
gswAdmStatusThe object indicates the desired
administrative status of the switch. A management station
may place the switch in a desired state by setting this
object accordingly.rw GswSwitchStatus .1.3.6.1.3.2.2.1.2.3.1.23 |
gswSsnThe object is the soft serial number of the
switch.rw DisplayString .1.3.6.1.3.2.2.1.2.3.1.26 |
gswBeaconOperStatusThe object is the current operational status
of the switch beacon. When the beacon is on, the switch
will give an indication that it needs attention.ro GswOnOff .1.3.6.1.3.2.2.1.2.3.1.30 |
gswBeaconAdmStatusThe object is the desired status of the switch
beacon. When the beacon is on, the switch will give an
indication that it needs attention.rw GswOnOff .1.3.6.1.3.2.2.1.2.3.1.31 |
gswDiagResultThe object indicates the result of the
power-on self test (POST) diagnostics. Result of 1
indicate that the switch is OK. Any other result needs to
be examined based on switch type.ro INTEGER .1.3.6.1.3.2.2.1.2.3.1.40 |
gswEventTrapLevelThis object specifies the gswEventTrap level
in conjunction with an event's severity level. When an
event occurs and if its severity level is at or below the
value specified by this object instance, the agent will
send the associated gswEventTrap to configured
recipients.rw GswEventSeverity .1.3.6.1.3.2.2.1.2.3.1.41 |
gswEventNumEntriesThe number of entries in the Event Table.ro INTEGER .1.3.6.1.3.2.2.1.2.3.1.42 |
gswPortComTableIt is a table that contains common fields for
entries of ports on a switching platform. SEQUENCE OF GswPortComEntry .1.3.6.1.3.2.2.1.2.4 |
gswPortComEntryAn entry of the common switch port
information. GswPortComEntry .1.3.6.1.3.2.2.1.2.4.1 |
gswPortComSwitchIdThe object is the unique global ID assigned to
the switch expressed in array of 16 octets. It is the
combination of GUID or WWN and type of an interconnect
element.ro GswGlobalId .1.3.6.1.3.2.2.1.2.4.1.1 |
gswPortComNumThis object indicates the physical port
number.ro INTEGER .1.3.6.1.3.2.2.1.2.4.1.2 |
gswPortComTypeThis object indicates the bit mask of native
Protocol supported by the port. The bits have the
following definition:
0x00000000 - unknown
0x00000001 - FC
0x00000002 - IBro INTEGER .1.3.6.1.3.2.2.1.2.4.1.3 |
gswPortComNameThis object indicates the assigned port name.ro GswOlsName .1.3.6.1.3.2.2.1.2.4.1.4 |
gswSensorTableThe table of sensor entries. SEQUENCE OF GswSensorEntry .1.3.6.1.3.2.2.1.2.10 |
gswSensorEntryAn entry of the sensor information. GswSensorEntry .1.3.6.1.3.2.2.1.2.10.1 |
gswSensorSwitchIdThe object is one of two indexes used by
gswSensorTable. This object corresponds to
gswGlobal itchId.ro GswGlobalId .1.3.6.1.3.2.2.1.2.10.1.1 |
gswSensorIndexThis object identifies the sensor.ro INTEGER .1.3.6.1.3.2.2.1.2.10.1.2 |
gswSensorTypeThis object identifies the sensor type.ro GswSensorTypeDef .1.3.6.1.3.2.2.1.2.10.1.3 |
gswSensorStatusThe current status of the sensor.ro GswSensorStatusDef .1.3.6.1.3.2.2.1.2.10.1.4 |
gswSensorValueThe current value (reading) of the sensor.
The value, -2147483648, represents an unknown quantity.
It also means that the sensor does not have the capability
to measure the actual value.ro INTEGER .1.3.6.1.3.2.2.1.2.10.1.5 |
gswSensorInfoAdditional displayable information on the
sensor. It contains the sensor type and number
in textual format. For example, 'Temp 3', 'Fan 6'.ro DisplayString .1.3.6.1.3.2.2.1.2.10.1.6 |
gswIBNodeTableThis table contains node information
pertaining to NodeDescription and NodeInfo within the
Subnet Management Agent. Therefore, this table only
applies to IB Switch, IB Router, and IB-FC Edge Router
type indicated by gswInventoryType in gswInventoryTable. SEQUENCE OF GswIBNodeEntry .1.3.6.1.3.2.2.1.2.20 |
gswIBNodeEntryAn entry of the IB node information. GswIBNodeEntry .1.3.6.1.3.2.2.1.2.20.1 |
gswIBNodeSwitchIdThe object is the index used by
gswIBNodeTable. This object corresponds to
gswGlobalSwitchId.ro GswGlobalId .1.3.6.1.3.2.2.1.2.20.1.1 |
gswIBNodeStringThe object is a UNICODE string to describe
node in text format.ro DisplayString .1.3.6.1.3.2.2.1.2.20.1.2 |
gswIBBaseVersionThe object is the supported MAD Base Version.
It indicates that this node supports up to and including
this version.ro INTEGER .1.3.6.1.3.2.2.1.2.20.1.3 |
gswIBClassVersionThe object is the supported Subnet Management
Class (SMP) Version. It indicates that this node supports
up to and including this version.ro INTEGER .1.3.6.1.3.2.2.1.2.20.1.4 |
gswIBNodeTypeThe object is node type.ro GswIBNodeType .1.3.6.1.3.2.2.1.2.20.1.5 |
gswIBNumPortsThe object indicates the number of physical
ports on this node.ro INTEGER .1.3.6.1.3.2.2.1.2.20.1.6 |
gswIBNodeGUIDThe object is the GUID of the switch. All
ports on the same node shall report the same Node-GUID.
It provides a means to uniquely identify a node within a
subnet and determine co-location of ports.ro GswIBGUID .1.3.6.1.3.2.2.1.2.20.1.7 |
gswIBPortGUIDThe object is the GUID of this port itself.
One port within a node can return the NodeGUID as its
PortGUID if the port is an integral part of the node and
is not field-replaceable.ro GswIBGUID .1.3.6.1.3.2.2.1.2.20.1.8 |
gswIBDeviceIDThe object is the Device ID information as
assigned by device manufacturer.ro INTEGER .1.3.6.1.3.2.2.1.2.20.1.9 |
gswIBRevisionThe object is the device resvision assigned by
device manufacturer.ro INTEGER .1.3.6.1.3.2.2.1.2.20.1.10 |
gswIBVendorIDThe object indicates the Device vendor, per
IEEE.ro INTEGER .1.3.6.1.3.2.2.1.2.20.1.11 |
gswIBSwTableThis table contains switch information
pertaining to switchInfo within Subnet Management Agent.
Therefore, this table only applies to IB Switch,
IB Router, and IB-FC Edge Router type indicated by
gswInventoryType in gswInventoryTable. SEQUENCE OF GswIBSwEntry .1.3.6.1.3.2.2.1.2.25 |
gswIBSwEntryAn entry of the IB node information. GswIBSwEntry .1.3.6.1.3.2.2.1.2.25.1 |
gswIBSwSwitchIdThe object is the index used by gswIBSwTable.
This object corresponds to gswGlobalSwitchId.ro GswGlobalId .1.3.6.1.3.2.2.1.2.25.1.1 |
gswIBBadMKeyCounterThis object returns the number of M_Key
violations for the switch.ro INTEGER .1.3.6.1.3.2.2.1.2.25.1.6 |
gswIBBadBKeyCounterThis object returns the number of
M_Key violations for the switch.ro INTEGER .1.3.6.1.3.2.2.1.2.25.1.7 |
gswIBSwitchChangeReasonThis object is mainly defined to support
switch change traps.ro Enumeration .1.3.6.1.3.2.2.1.2.25.1.8 |
gswFabric OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.5 |
gswTopoComTableThe table contains information regarding how
switches in the SAN are connected. SEQUENCE OF GswTopoComEntry .1.3.6.1.3.2.2.1.5.1 |
gswTopoComEntryAn entry of the common topology information. GswTopoComEntry .1.3.6.1.3.2.2.1.5.1.1 |
gswTopoComSwitchIdThe object is one of the two indexes used by
gswTopoComTable. This object corresponds to
gswGlobalSwitchId.ro GswGlobalId .1.3.6.1.3.2.2.1.5.1.1.1 |
gswTopoComPortIndexThis object is one of two indexes used by
gswTopoComTable. This object corresponds to the
port number where the link it connected to.ro INTEGER .1.3.6.1.3.2.2.1.5.1.1.2 |
gswTopoComNbSwitchIdThis object is the ID of the switch connected
at the end of the port indicated by gswSTSwitchId and
gswSTPortIndex. It represents the gswSwitchGlobalId.ro INTEGER .1.3.6.1.3.2.2.1.5.1.1.3 |
gswTopoComNbSwitchPortThis object is the port of the switch
connected at the end of the port indicated by
gswTopoComSwitchId and gswTopoComPortIndex .ro INTEGER .1.3.6.1.3.2.2.1.5.1.1.4 |
gswTopoComSwitchStatusThe object is defined mainly for trap support.
The object can be set added (2) or deleted (3)
for a topology change trap. Query of the object returns
no-change (1).ro Enumeration .1.3.6.1.3.2.2.1.5.1.1.5 |
gswIBTopoTableThe table contains IB-specific topology
information. SEQUENCE OF GswIBTopoEntry .1.3.6.1.3.2.2.1.5.5 |
gswIBTopoEntryAn entry of the IB topology information. GswIBTopoEntry .1.3.6.1.3.2.2.1.5.5.1 |
gswIBTopoSwitchIdThe object is the index used by
gswIBTopoTable. This object corresponds to
gswGlobalSwitchId.ro GswGlobalId .1.3.6.1.3.2.2.1.5.5.1.1 |
gswIBTopoChangeReasonThis object is defined mainly for topology
change trap support.ro Enumeration .1.3.6.1.3.2.2.1.5.5.1.2 |
gswModule OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.6 |
gswPort OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.10 |
gswIBPortTableThe object is a table that contains, one entry
for each switch port, configuration and service parameters
of the port. This table mainly represents information
contained in portInfo within Subnet Management Agent.
Therefore, this table only applies to IB Switch,
IB Router, and IB-FC Edge Router type indicated by
gswInventoryType in gswInventoryTable. SEQUENCE OF GswIBPortEntry .1.3.6.1.3.2.2.1.10.5 |
gswIBPortEntryAn entry of the IB port information. GswIBPortEntry .1.3.6.1.3.2.2.1.10.5.1 |
gswIBPortSwitchIdThe object is one of the two indexes used by
gswIBPortTable. This object corresponds to
gswGlobalSwitchId.ro GswGlobalId .1.3.6.1.3.2.2.1.10.5.1.1 |
gswIBPortIndexThe object is one of two indexes used by
gswIBPortTable. The object identifies the physical port
number.ro INTEGER .1.3.6.1.3.2.2.1.10.5.1.2 |
gswIBGidPrefixThe object is the GID prefix for this port.ro GswIBGID .1.3.6.1.3.2.2.1.10.5.1.6 |
gswIBLIDThe object is the base LID of this port.ro GswIBLID .1.3.6.1.3.2.2.1.10.5.1.7 |
gswIBMasterSMLIDThe object is the base LID of the master SM
that is managing this port.ro GswIBLID .1.3.6.1.3.2.2.1.10.5.1.8 |
gswIBCapabilityMaskThe object indicates the supported
capabilities of this node. A bit set to 1 for affirmation
of supported capability.
0: Reserved, shall be zero
1: IsSM
2: IsNoticeSupported
3: IsTrapSupported
4: IsResetSupported
5: IsAutomaticMigrationSupported
6: IsSLMappingSupported
7: IsMKeyNVRAM (supports M_Key in NVRAM)
8: IsPKeyNVRAM (supports P_Key in NVRAM)
9: IsLEDInfoSupported
10: IsSMdisabled
11 - 15: Reserved, shall be zero
16: IsConnectionManagementSupported
17: IsSNMPTunnelingSupported
18: Reserved, shall be zero
19: IsDeviceManagementSupported
20: IsVendorClassSupported
21 - 31: Reserved, shall be zeroro INTEGER .1.3.6.1.3.2.2.1.10.5.1.9 |
gswIBDiagCodeThe object indicates the IB Diagnostic code.ro INTEGER .1.3.6.1.3.2.2.1.10.5.1.10 |
gswIBLinkWidthEnabledThe object indicates the enabled link
width.ro GswIBLinkWidth .1.3.6.1.3.2.2.1.10.5.1.12 |
gswIBLinkWidthSupportedThe object indicates the supported link
width.ro GswIBLinkWidth .1.3.6.1.3.2.2.1.10.5.1.13 |
gswIBLinkWidthActiveThe object is the currently active link
width.ro GswIBLinkWidth .1.3.6.1.3.2.2.1.10.5.1.14 |
gswIBLinkSpeedSupportedThe object indicates the supported link
speed.ro GswIBLinkSpeed .1.3.6.1.3.2.2.1.10.5.1.15 |
swIBPortStateThe object indicates the port state.ro SwIBPortState .1.3.6.1.3.2.2.1.10.5.1.16 |
gswIBPortPhysicalStateThe object indicates the port physical state.ro GswIBPortPhysState .1.3.6.1.3.2.2.1.10.5.1.17 |
gswIBLinkDownDefaultStateThe object indicates port down default state.ro Enumeration .1.3.6.1.3.2.2.1.10.5.1.18 |
gswIBLMCThe object is the LID mask for multipath
support.ro INTEGER .1.3.6.1.3.2.2.1.10.5.1.20 |
gswIBLinkSpeedActiveThe object indicates the currently active link
speed.ro GswIBLinkSpeed .1.3.6.1.3.2.2.1.10.5.1.21 |
gswIBLinkSpeedEnabledThe object indicates the enabled link speed.ro GswIBLinkSpeed .1.3.6.1.3.2.2.1.10.5.1.22 |
gswIBNeighborMTUThe object indicates the active maximum MTU
enabled on this port for transmit.ro GswIBMTU .1.3.6.1.3.2.2.1.10.5.1.23 |
gswIBVLCapThe object indicates the virtual Lanes
supported on this port.ro GswIBVL .1.3.6.1.3.2.2.1.10.5.1.24 |
gswIBMTUCapThe object is the maximum MTU supported by
this port.ro GswIBMTU .1.3.6.1.3.2.2.1.10.5.1.25 |
gswIBOperationalVLsThe object indicates the virtual Lanes
operational on this port.ro GswIBVL .1.3.6.1.3.2.2.1.10.5.1.28 |
gswIBMKeyViolationsThe object counts the number of SMP packets
that have been received at this port that have had
invalid M_Keys, since power-on or reset. Increments
till count reaches all 1s and then must be set back
to zero to re-enable incrementing.ro INTEGER .1.3.6.1.3.2.2.1.10.5.1.29 |
gswIBPKeyViolationsThe object counts the number of packets that
have been received at this port that have had
invalid P_Keys, since power-on or reset. Increments
till count reaches all 1s and then must be set back
to zero to re-enable incrementing.ro INTEGER .1.3.6.1.3.2.2.1.10.5.1.30 |
gswIBQKeyViolationsThe object counts the number of packets that
have been received at this port that have had
invalid Q_Keys, since power-on or reset. Increments till
count reaches all 1s and then must be set back to
zero to re-enable incrementing.ro INTEGER .1.3.6.1.3.2.2.1.10.5.1.32 |
gswIBLocalPhyErrorsThe object is the threshold value. When the
count of marginal link errors exceeds this threshold,
the local link integrity error shall be detected.ro INTEGER .1.3.6.1.3.2.2.1.10.5.1.36 |
gswIBOverrunErrorsThe object is the threshold value. When
the count of buffer overruns over consecutive
flow control update periods exceeds this threshold,
the excessive buffer overrun error shall be detected.ro INTEGER .1.3.6.1.3.2.2.1.10.5.1.37 |
gswIBPortChangeReasonThe object is mainly implemented to support
traps.ro Enumeration .1.3.6.1.3.2.2.1.10.5.1.38 |
gswPortPerf OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.11 |
gswIBPortPerfTableThe table contains information pertaining to
portCounters within Performance Management Agent.
Therefore, this table only applies to IB Switch,
IB Router, and IB-FC Edge Router type indicated
by gswInventoryType in gswInventoryTable. SEQUENCE OF GswIBPortPerfEntry .1.3.6.1.3.2.2.1.11.5 |
gswIBPortPerfEntryAn entry of the IB port information. GswIBPortPerfEntry .1.3.6.1.3.2.2.1.11.5.1 |
gswIBPortPerfSwitchIdThe object is one of the two indexes used by
gswIBPortPerfTable. This object corresponds to
gswGlobalSwitchId.ro GswGlobalId .1.3.6.1.3.2.2.1.11.5.1.1 |
gswIBPortPerfIndexThe object is one of two indexes used by
gswIBPortPerfTable. The object identifies the physical
port number.ro INTEGER .1.3.6.1.3.2.2.1.11.5.1.2 |
gswIBSymbolErrorCounterThe object indicates total number of symbol
errors detected on one or more lanes.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.3 |
gswIBLinkErrorRecoveryCounterThe object indicates total number of times
the Port Training state machine has successfully
completed the link error recovery process.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.4 |
gswIBLinkDownedCounterThe object indicates total number of times
the Port Training state machine has failed the link
error recovery process and downed the link.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.5 |
gswIBPortRcvErrorsThe object indicates total number of packets
containing an error that were received on the port.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.6 |
gswIBPortRcvRemotePhysicalErrorsThe object indicates total number of packets
marked with the EBP delimiter received on the port.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.7 |
gswIBPortRcvSwitchRelayErrorsThe object indicates total number of packets
received on the port that were discarded because they
could not be forwarded by the switch relay.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.8 |
gswIBPortXmitDiscardsThe object indicates total number of outbound
packets discarded by the port because the port is down
or congested.ro INTEGER .1.3.6.1.3.2.2.1.11.5.1.9 |
gswIBPortXmitConstraintErrorsThe object indicates total number of packets
not transmitted from the port.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.10 |
gswIBPortRcvConstraintErrorsThe object indicates total number of packets
received on the port that are discarded.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.11 |
gswIBLocalLinkIntegrityErrorsThe object indicates the number of times that
the frequency of packets containing local physical errors
exceeded local_phy_errors.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.12 |
gswIBExcessiveBufferOverrunErrorsThe object indicates the number of times that
overrun errors consecutive flow control update periods
occurred with at least one overrun error in each period.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.13 |
gswIBVL15DroppedThe object indicates the number of incoming
VL15 packets dropped due to resource limitations on port.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.14 |
gswIBPortXmitDataThe object indicates total number of data
octets, divided by 4, transmitted on all VLs from the
port. This includes all octets between (and not
including) the start of packet delimiter and VCRC. It
excludes all link packets.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.15 |
gswIBPortRcvDataThe object indicates total number of data
octets, divided by 4, received on all VLs on the port.
This includes all octets between (and not including)
the start of packet delimiter and VCRC. It excludes
all link packets.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.16 |
gswIBPortXmitPktsThe object indicates total number of packets,
excluding link packets, transmitted on all VLs from the
port.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.17 |
gswIBPortRcvPktsThe object indicates total number of packets,
including packets containing errors and excluding
link packets, received from all VLs on the port.ro GswCounter64 .1.3.6.1.3.2.2.1.11.5.1.18 |
gswNs OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.13 |
gswEvent OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.15 |
gswEventTableThe table of event entries. SEQUENCE OF GswEventEntry .1.3.6.1.3.2.2.1.15.1 |
gswEventEntryAn entry of the event table. GswEventEntry .1.3.6.1.3.2.2.1.15.1.1 |
gswEventSwitchIdThe object is the index used by gswEventTable.
This object corresponds to gswGlobalSwitchId.ro GswGlobalId .1.3.6.1.3.2.2.1.15.1.1.1 |
gswEventIndexThis object identifies the event entry.ro INTEGER .1.3.6.1.3.2.2.1.15.1.1.2 |
gswEventTimeInfoThis object identifies the date and time when
this event occurred, in textual format.ro DisplayString (SNMPv2-TC) .1.3.6.1.3.2.2.1.15.1.1.3 |
gswEventLevelThis object identifies the severity level of
this event entry.ro GswEventSeverity .1.3.6.1.3.2.2.1.15.1.1.4 |
gswEventRepeatCountThis object identifies how many times this
particular event has occurred.ro INTEGER .1.3.6.1.3.2.2.1.15.1.1.5 |
gswEventDescrThis object identifies the textual description
of the event.ro DisplayString (SNMPv2-TC) .1.3.6.1.3.2.2.1.15.1.1.6 |
gswEndDevice OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.21 |
gswAgtCfg OBJECT IDENTIFIER .1.3.6.1.3.2.2.1.25 |
gswAgtCmtyTableA table that contains, one entry for each
Community, the access control and parameters of the
Community. SEQUENCE OF GswAgtCmtyEntry .1.3.6.1.3.2.2.1.25.11 |
gswAgtCmtyEntryAn entry containing the Community parameters. GswAgtCmtyEntry .1.3.6.1.3.2.2.1.25.11.1 |
gswAgtCmtySwitchIdThe object is the index used by
gswAgtCmtyTable. This object corresponds to
gswGlobalSwitchId.ro GswGlobalId .1.3.6.1.3.2.2.1.25.11.1.1 |
gswAgtCmtyIdxThis object identifies the SNMPv1 Community
entry.ro INTEGER .1.3.6.1.3.2.2.1.25.11.1.2 |
gswAgtCmtyStrThis is a Community string supported by the
agent. If a new value is set successfully, it takes
effect immediately.rw DisplayString .1.3.6.1.3.2.2.1.25.11.1.3 |
gswAgtTrapRcpThis is the trap recipient associated with the
Community. If a new value is set successfully, it takes
effect immediately.rw NetworkAddress .1.3.6.1.3.2.2.1.25.11.1.4 |
ib1k OBJECT IDENTIFIER .1.3.6.1.3.2.2.2 |