IBM2260-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
61
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
61 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTIBM2260PortTableA list of IBM2260 Port configuration entries. SEQUENCE OF Cdx6500IBM2260ConfigEntry .1.3.6.1.4.1.449.2.1.2.1.1.20 |
cdx6500PPCTIBM2260PortEntryAn IBM2260 Configuration Table entry. Each entry
contains the configuration parameters for a single
IBM2260 port. Cdx6500IBM2260ConfigEntry .1.3.6.1.4.1.449.2.1.2.1.1.20.1 |
cdx6500IBM2260CfgPortNumberThe port number corresponding to this port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.20.1.1 |
cdx6500IBM2260CfgPadTypeIndicates whether the port is functioning as a Terminal
PAD (TPAD) or a Host PAD (HPAD).ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.20.1.2 |
cdx6500IBM2260CfgPortSpeedThis is the speed of the port in bits per second, when using
internal clocking.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.20.1.3 |
cdx6500IBM2260CfgConnTypeSpecify the control signal handshake required for a
connection to be made to this port:
simp - simple, no control signals required.
simpa - CTS follows RTS, but no control signals required.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.20.1.4 |
cdx6500IBM2260CfgNumDeviceSpecifies the number of IBM2260 stations on this line.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.20.1.5 |
cdx6500IBM2260CfgServiceTimerThe Service Timer specifies the interval of time in
seconds between periodic servicing. Such servicing
includes intervals between attempts to establish network
connections, intervals between attempts in TPAD to poll
terminals that previously failed to respond, and in HPAD
this timer is also used to detect host inactivity
(i.e. when the host stops polling the station(s)).ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.20.1.6 |
cdx6500IBM2260CfgThreshCtrIndicates number of consecutive errors that can occur
before a station is considered down.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.20.1.7 |
cdx6500IBM2260CfgRespTimeoutSpecifies the amount of time in msec the PAD allows
a terminal, printer or host to respond. As a result,
the TPAD may re-transmit the previous message or abort
the current procedure.
The HPAD aborts the current procedure as though EOT
was received, allowing this HPAD station to disconnect
it's SVC if the host malfunctions. An HPAD with
a response timeout shorter than the hosts ability to respond
may result in Inbound Errors.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.20.1.8 |
cdx6500IBM2260CfgPortSubAddrCalls addressed to this node and with this subaddress
will be routed to this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.20.1.9 |
cdx6500IBM2260CfgPortOptSelect options on this IBM2260 port as follows:
NONE - No option specified
ORG - Originate calls from this port
ACK - DSP End-to-End Acknowledgements are to be used
Any combination of above specified by summing (e.g. ORG+ACK).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.20.1.10 |
cdx6500IBM2260CfgRestConnDestAll calls originating from this port will be routed to the
destination specified in this parameter, irrespective of route
selection table entries.
For example, to route calls to port 1, use P1. To route
calls to port 2, station 4, use P2S4.
Blank this field to disable this function.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.20.1.11 |
cdx6500IBM2260CfgBillRecThis controls whether billing (accounting) records will be
created for calls on this port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.20.1.12 |
cdx6500IBM2260CfgElectricalInterfaceTypeSpecify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
Note: Changing this parameter requires manual settings on SWITCH1:
Interface SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8
V.24 ON ON ON ON ON OFF OFF OFF
V.35,V.36,X.21 OFF OFF OFF OFF OFF ON ON ONro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.20.1.13 |
cdx6500IBM2260CfgV24ElectricalInterfaceOptionSpecify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signalro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.20.1.14 |
cdx6500IBM2260CfgHighSpeedElectricalInterfaceOptionSpecify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cablero Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.20.1.15 |
cdx6500PCTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.3 |
cdx6500SPCTIBM2260StationTableAll of the configuration parameters relevant
to the IBM2260 Station table. SEQUENCE OF Cdx6500SPCTIBM2260StationEntry .1.3.6.1.4.1.449.2.1.2.1.3.6 |
cdx6500SPCTIBM2260StationEntryA row of IBM2260 station configuration parameters. Cdx6500SPCTIBM2260StationEntry .1.3.6.1.4.1.449.2.1.2.1.3.6.1 |
cdx6500IBM2260sCfgPortNumPort number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.6.1.1 |
cdx6500IBM2260sCfgStationNumStation number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.6.1.2 |
cdx6500IBM2260sTypesingle - configures a single station addressable by
the ADDR1-ADDR2 address pair.
group - configures a group of stations addressable
by the ADDR1 address character, but ADDR2 is
assumed to be 40H, 41H, 42H and 43H.
This type is intended for support of DataTroll
devices.
NOTE: `group' Station should not be used when the
BSC3270-IBM2260 protocol Interoperation is being used.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.3.6.1.3 |
cdx6500IBM2260sStationAddr1This is the first byte of this Station's address.
The Station address consists of two hexadecimal digits.
The valid range for a digit is: 20-7F;ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.3.6.1.4 |
cdx6500IBM2260sStationAddr2This is the second byte of this Station's address.
The Station address consists of two hexadecimal digits.
The valid range for a digit is: 20-7Fro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.3.6.1.5 |
cdx6500IBM2260sCallMnemThis mnemonic name is used if this port is
configured for originating connection requests.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.3.6.1.6 |
cdx6500IBM2260sStationEnableThis parameter is used to disable/enable a station.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.3.6.1.7 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPSTIBM2260PortTableA list of IBM2260 Port statistics. SEQUENCE OF Cdx6500PPSTIBM2260PortEntry .1.3.6.1.4.1.449.2.1.3.1.1.19 |
cdx6500PPSTIBM2260PortEntryAn IBM2260 Statistics Table entry. Each entry
contains the statistics for a single IBM2260 port. Cdx6500PPSTIBM2260PortEntry .1.3.6.1.4.1.449.2.1.3.1.1.19.1 |
cdx6500IBM2260StatPortNumberPhysical port numberro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.1 |
cdx6500IBM2260StatPortStatusOperational Status of the port.
The different operational statuses are:
UP : At least 1 station is responding to polls.
DOWN : None of the stations are responding to polls.
DISABLED : The port is disabled by the user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.19.1.2 |
cdx6500IBM2260StatPortStateCurrent State of this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.19.1.3 |
cdx6500IBM2260StatPortSpeedThe measured port speed in bits per second.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.19.1.4 |
cdx6500IBM2260StatPortUtilinThe amount of the port's bandwidth that is being utilized;
because IBM2260 is a half-duplex protocol the utilization
is calculated as the sum of the receive and transmit
utilization.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.5 |
cdx6500IBM2260StatPortUtilOutThe amount of the port's bandwidth that is being utilized;
because IBM2260 is a half-duplex protocol the utilization
is calculated as the sum of the receive and transmit
utilization.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.6 |
cdx6500IBM2260StatParityErrorsThe number of character parity errors counted by the I/O
driver.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.7 |
cdx6500IBM2260StatOverrunErrorsThe number of received character overruns counted
by the I/O driver.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.8 |
cdx6500IBM2260StatFramingErrorsThe number of asynchronous chracters received which violated
the character framing of start and stop bits.
Note, this statistic is only valid if the port is configured
for ASYNC line interface.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.9 |
cdx6500IBM2260StatBCCErrorsThe number of BCC errors counted by the I/O driver.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.10 |
cdx6500IBM2260StatNoResponseThe number of times the response timer has expired.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.11 |
cdx6500IBM2260StatCharInTotalTotal number of chracters received to present.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.12 |
cdx6500IBM2260StatCharOutTotalTotal number of chracters transmitted to present.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.13 |
cdx6500IBM2260StatCharInSecondAverage number of characters received to present.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.14 |
cdx6500IBM2260StatCharOutSecondAverage number of characters transmitted to present.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.15 |
cdx6500IBM2260StatPosAckInNumber of ACKs received.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.16 |
cdx6500IBM2260StatPosAckOutNumber of ACKs transmitted.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.17 |
cdx6500IBM2260StatNegAckInNumber of NAKs received.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.18 |
cdx6500IBM2260StatNegAckOutNumber of NAKs transmitted.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.19 |
cdx6500IBM2260StatMsgRetranNumber of messages retransmitted due to NAKs or timeouts
to present.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.19.1.20 |
cdx6500PSTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.3 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |