IBM-INTERFACE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IBM-INTERFACE-MIB.
17
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
ibmIROCroutinginterface OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17 |
SNMPv2-SMI-v1 Unknown .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17 |
ibminterfaceClearTableA table allowing interface counters to be cleared. SEQUENCE OF IbminterfaceClearEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1 |
ibminterfaceClearEntryEntry identifying a particular interface whose counters
are to be cleared. IbminterfaceClearEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1 |
ibminterfaceClearInOctetsWhen SET to a value of clear(1), the counter of bytes
received over this interface is reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.1 |
ibminterfaceClearInUcastPktsWhen SET to a value of clear(1), the counter of unicast
packets received over this interface is reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.2 |
ibminterfaceClearInMulticastPktsWhen SET to a value of clear(1), the counter of multicast
packets received over this interface is reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.3 |
ibminterfaceClearInErrorsWhen SET to a value of clear(1), the counters for all
types of input errors are reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.4 |
ibminterfaceClearInAllWhen SET to a value of clear(1), the counters for all
input counters (byte, packet, error) are reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.5 |
ibminterfaceClearOutOctetsWhen SET to a value of clear(1), the counter of bytes
sent over this interface is reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.6 |
ibminterfaceClearOutUcastPktsWhen SET to a value of clear(1), the counter of unicast
packets sent over this interface is reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.7 |
ibminterfaceClearOutMulticastPktsWhen SET to a value of clear(1), the counter of multicast
packets sent over this interface is reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.8 |
ibminterfaceClearOutErrorsWhen SET to a value of clear(1), the counters for all
types of output errors are reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.9 |
ibminterfaceClearOutAllWhen SET to a value of clear(1), the counters for all
output counters (byte, packet, error) are reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.10 |
ibminterfaceClearMaintTestWhen SET to a value of clear(1), the counters for
self test pass, self test fail and maintenance
fail are reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.11 |
ibminterfaceClearDeviceSpecificWhen SET to a value of clear(1), all the device specific
counters are reset. For example, for an Ethernet
interface, all the counters provided in the
dot3StatsTable are reset.
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.12 |
ibminterfaceClearAllWhen SET to a value of clear(1), all the reset actions
performed by the MIB objects defined above are executed
at once.
This action has the same behavior as executing the
CLEAR command from the T5 console prompt (+).
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.17.1.1.13 |