IB-SMA-MIB
AI MIB Summary
The IB-SMA-MIB module provides managed object definitions for monitoring and managing the operational state, port statistics, and topology discovery functions of InfiniBand Subnet Management Agents (SMAs). It enables the retrieval of critical performance metrics such as port counters, link status, and subnet routing information to facilitate the administration of high-performance InfiniBand networks.
Copyright (C) The Internet Society (2005). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html. This module contains managed object definitions for the Subnet Management Agent instrumentation for an InfiniBand Subnet Management Agent (SMA).
Main OID:
ibSmaMIB.1.3.6.1.3.117.3
224
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
224 total| Object Name |
|---|
ibSmaMIBCopyright (C) The Internet Society (2005). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html. This module contains managed object definitions for the Subnet Management Agent instrumentation for an InfiniBand Subnet Management Agent (SMA). MODULE-IDENTITY .1.3.6.1.3.117.3 |
ibSmaObjects OBJECT IDENTIFIER .1.3.6.1.3.117.3.1 |
ibSmaNodeInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.1 |
ibSmaNodeStringThe node description. This is the Node description string from the NodeDescription attribute. The contents of the NodeDescription attribute is the same for all ports on a node.ro SnmpAdminString .1.3.6.1.3.117.3.1.1.1 |
ibSmaNodeBaseVersionThe supported Management Datagram (MAD) base version. This value indicates that the node supports up to and including this version. This value is the same for all ports on a node. (NOTE: for InfiniBand Release 1 this value should be set to 1.)ro Unsigned32 .1.3.6.1.3.117.3.1.1.2 |
ibSmaNodeClassVersionThe supported Subnet Management Class (SMP) version. This value indicates that the node supports up to and including this version. This value is the same for all ports on a node. (NOTE: for InfiniBand Release 1 this value should be set to 1.)ro Unsigned32 .1.3.6.1.3.117.3.1.1.3 |
ibSmaNodeTypeType of IBA device this SMA is supporting. InfiniBand types are 1: Channel Adapter 2: Switch 3: Router 0,4-255: reservedro Enumeration .1.3.6.1.3.117.3.1.1.4 |
ibSmaNodeNumPortsThe number of physical InfiniBand ports on this node.ro Unsigned32 .1.3.6.1.3.117.3.1.1.5 |
ibSmaSystemImageGuidThe GUID of this node that associates this node with other nodes in the same administrative domain. These nodes are controlled by common supervisory code. This object provides a way for system software to indicate the availability of multiple paths to the same destination via multiple nodes. If this value is 0, there is no association. This object may be equal to the ibSmaNodeGuid of one of the associated nodes if that node is not field-replaceable.ro IbGuid (IB-TC-MIB) .1.3.6.1.3.117.3.1.1.6 |
ibSmaNodeGuidThe GUID of this node. The node can be a Host Channel Adpater (HCA), Terminal Channel Adapter (TCA), switch, or router. All ports on the same node shall report the same NodeGUID value. This provides a means for uniquely identifying a node within a subnet and helps to determine the co-location of the ports.ro IbGuid (IB-TC-MIB) .1.3.6.1.3.117.3.1.1.7 |
ibSmaNodePortGuidThe node port GUID. One port within a node can return the NodeGUID as its PortGUID if the port is an integral part of the node and is not field-replaceable.ro IbGuid (IB-TC-MIB) .1.3.6.1.3.117.3.1.1.8 |
ibSmaNodePartitionTableNumNumber of entries in the Partition Table for CA, router, and the switch management port. This is at a minimum set to 1 for all nodes including switches. This value shall be the same for all ports on a node.ro Unsigned32 .1.3.6.1.3.117.3.1.1.9 |
ibSmaNodeDeviceIdDevice ID information as assigned by the device manufacturer. This value shall be the same for all ports on a node.ro OCTET STRING .1.3.6.1.3.117.3.1.1.10 |
ibSmaNodeRevisionManufacturer assigned device revision. This value shall be the same for all ports on a node.ro OCTET STRING .1.3.6.1.3.117.3.1.1.11 |
ibSmaNodeLocalPortNumOrZeroThe number of the IBA port which received this SNMP request. If the port is unknown a 0 is returned.ro Unsigned32 .1.3.6.1.3.117.3.1.1.12 |
ibSmaNodeVendorIdIEEE specified device vendor identifier. This value shall be the same for all ports on a node.ro OCTET STRING .1.3.6.1.3.117.3.1.1.13 |
ibSmaNodeLidLocal Identifier value. Used for notification var bind list object. Retrieved from InfiniBand traps 128, 129, 130, 131, 144, 145, 256, 257, 258, and 259.ro Unsigned32 .1.3.6.1.3.117.3.1.1.14 |
ibSmaNodePortNumPort number. Used for notification var bind list object. Retrieved from InfiniBand traps 129, 130, 131, and 259.ro IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.1.15 |
ibSmaNodeMethodMethod. Used for notification var bind list object. Retrieved from InfiniBand trap 256.ro Unsigned32 .1.3.6.1.3.117.3.1.1.16 |
ibSmaNodeAttributeIdAttribute ID. Used for notification var bind list object. Retrieved from InfiniBand trap 256.ro Unsigned32 .1.3.6.1.3.117.3.1.1.17 |
ibSmaNodeAttributeModifierAttribute Modifier. Used for notification var bind list object. Retrieved from InfiniBand trap 256.ro Unsigned32 .1.3.6.1.3.117.3.1.1.18 |
ibSmaNodeKeyM_Key, Q_Key or P_Key. Used for notification var bind list object. Retrieved from InfiniBand traps 256, 257, 258, and 259. Note: If it is a P_Key, the 16 most significant bits of the field shall be set to 0 and the least significant bits of the field will be set to the P_Key.ro OCTET STRING .1.3.6.1.3.117.3.1.1.19 |
ibSmaNodeLid2To Local Identifier (LID). Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259.ro Unsigned32 .1.3.6.1.3.117.3.1.1.20 |
ibSmaNodeServiceLevelService Level. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259.ro Unsigned32 .1.3.6.1.3.117.3.1.1.21 |
ibSmaNodeQueuePair1Queue Pair (QP) 1. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259.ro Unsigned32 .1.3.6.1.3.117.3.1.1.22 |
ibSmaNodeQueuePair2Queue Pair (QP) 2. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259.ro Unsigned32 .1.3.6.1.3.117.3.1.1.23 |
ibSmaNodeGid1Global Identifier 1. Used for notification var bind list object. Retrieved from InfiniBand traps 64, 65, 66, 67, 257, 258, and 259. Note: If no Global Routing Header (GRH) is present in the offending packet, this value will be all zeros.ro OCTET STRING .1.3.6.1.3.117.3.1.1.24 |
ibSmaNodeGid2Global Identifier 2. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 258. Note: If no GRH is present in the offending packet, this value will be all zeros.ro OCTET STRING .1.3.6.1.3.117.3.1.1.25 |
ibSmaNodeCapMaskContents of Capability Mask. Retrieved from InfiniBand trap 144.ro OCTET STRING .1.3.6.1.3.117.3.1.1.26 |
ibSmaNodeSwitchLidThe switch Local Identifier (LID). Used for notification var bind list object. Retrieved from InfiniBand traps 259.ro Unsigned32 .1.3.6.1.3.117.3.1.1.27 |
ibSmaNodeDataValidData valid field retrieved from InfiniBand trap 259. It is a bit mask. If the bit is set, the field is valid. bit 0: LIDADDR1 bit 1: LIDADDR2 bit 2: PKEY bit 3: SL bit 4: QP1 bit 5: QP2 bit 6: GIDADDR1 bit 7: GIDADDR2 bit 8-15: reserved (0).ro Bits .1.3.6.1.3.117.3.1.1.28 |
ibSmaSwitchInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.2 |
ibSmaSwLinearFdbTableNumNumber of entries in the Linear Forwarding Data Base. This is the number of entries supported in the Linear Unicast Forwarding Table (starting at LID=0x0000 and going up). The InfiniBand SwitchInfo component is called LinearFDBCap. When the count is 0, this indicates that there is no Linear Forwarding Database present.ro Unsigned32 .1.3.6.1.3.117.3.1.2.1 |
ibSmaSwRandomFdbTableNumNumber of entries in the Random Forwarding Data Base. This is the number of entries supported in the Random Unicast Forwarding Table. The InfiniBand SwitchInfo component is called RandomFDBCap. When the count is 0, this indicates that there is no Random Forwarding Database present.ro Unsigned32 .1.3.6.1.3.117.3.1.2.2 |
ibSmaSwMulticastFdbTableNumNumber of entries in the Multicast Forwarding Data Base. This is the number of entries supported in the Multicast Forwarding Table (starting at LID=0xC000 and going up). The InfiniBand SwitchInfo component is called MulticastFDBCap.ro Unsigned32 .1.3.6.1.3.117.3.1.2.3 |
ibSmaSwLinearFdbTopIndicates the top of the linear forwarding database. Packets received with unicast DLIDs greater than this value are discarded by the switch. A valid LinearFdbTop is less than LinearFdbCap. This component applies only to switches that implement linear forwarding tables and is ignored by switches that implement random forwarding tables. For the latter cases a 0 is returned.ro Unsigned32 .1.3.6.1.3.117.3.1.2.4 |
ibSmaSwDefaultPortDefault forwarding port for unicast packets from the other ports whose DLID does not exist in the random forwarding table. If the port number is unknown, a 0 is returned.ro Unsigned32 .1.3.6.1.3.117.3.1.2.5 |
ibSmaSwDefMcastPriPortDefault forwarding port for multicast packets from the other ports whose DLID does not exist in the forwarding table. If port number is unknown, a 0 is returned.ro Unsigned32 .1.3.6.1.3.117.3.1.2.6 |
ibSmaSwDefMcastNotPriPortForward to this port all the multicast packets from the Default Primary port whose DLID does not exist in the forwarding table. If it is unknown, a 0 is returned.ro Unsigned32 .1.3.6.1.3.117.3.1.2.7 |
ibSmaSwLifeTimeValueReports the time a packet can live in the switch. This Lifetime Value (LV) is used as a parameter to calculate Switch Lifetime Limit (SLL) value. To calculate a valid SLL, the LV must be between 0 and 19, inclusive. If the LV value is greater than 19, the SLL is to be interpreted as infinite.ro Unsigned32 .1.3.6.1.3.117.3.1.2.8 |
ibSmaSwPortStateChangeThis object is set to true(1) whenever the PortState component makes any of the following state changes in the link finite state machine (FSM): Down --> Initialize, Initialize --> Down, Armed --> Down, or Active --> Downro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.2.9 |
ibSmaSwLidsPerPortSpecifies the number of LID/Link Mask Control (LMC) combinations that may be assigned to a given external port for switches that support the Random Forwarding table.ro Unsigned32 .1.3.6.1.3.117.3.1.2.10 |
ibSmaSwPartitionEnforceNumSpecifies the number of entries in the partition enforcement table per physical IBA port. The 0 value indicates that partition enforcement is not supported by the switch.ro Unsigned32 .1.3.6.1.3.117.3.1.2.11 |
ibSmaSwInboundEnforceCapFlag that indicates whether the switch is capable of partition enforcement on received packets.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.2.12 |
ibSmaSwOutboundEnforceCapFlag that indicates whether the switch is capable of partition enforcement on transmitted packets.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.2.13 |
ibSmaSwFilterRawPktInputCapFlag to indicate whether the switch is capable of raw packet enforcement on received packets.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.2.14 |
ibSmaSwFilterRawPktOutputCapFlag to indicate whether the switch is capable of raw packet enforcement on transmitted packets.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.2.15 |
ibSmaSwEnhancedPort0Flag to indicate whether switch port 0 supports enhanced functions (TCA port). If false, switch port 0 is a base switch port 0.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.2.16 |
ibSmaGuidInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.3 |
ibSmaGuidInfoTableA table containing SMA GUID information. SEQUENCE OF IbSmaGuidInfoEntry .1.3.6.1.3.117.3.1.3.1 |
ibSmaGuidInfoEntryA conceptual row of the ibSmaGuidInfoTable containing information about a particular GUID entry. IbSmaGuidInfoEntry .1.3.6.1.3.117.3.1.3.1.1 |
ibSmaGuidPortIndexIndex that identifies IB port associated with this GUID table. IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.3.1.1.1 |
ibSmaGuidIndexIndex that identifies the GUID entry for this port. For any IB port there can be multiple 64 bit GUIDs assigned. The maximum number is implementation dependent (up to 255). If the port does not have a GUID assigned to it, the row will have 1 entry with a ibSmaGuidVal value of zeroes. Unsigned32 .1.3.6.1.3.117.3.1.3.1.1.2 |
ibSmaGuidValA Global Unique Identifier (GUID) for this port entity.ro IbGuid (IB-TC-MIB) .1.3.6.1.3.117.3.1.3.1.1.3 |
ibSmaMgmtPortInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.4 |
ibSmaPortMKeyThe 8-byte management key that is kept locally for the management port. If the value is 0's, no authentication is done.ro OCTET STRING .1.3.6.1.3.117.3.1.4.1 |
ibSmaPortGidPrefixGID prefix for this port.ro OCTET STRING .1.3.6.1.3.117.3.1.4.2 |
ibSmaPortLidThe base LID of this port.ro Unsigned32 .1.3.6.1.3.117.3.1.4.3 |
ibSmaPortMasterSmLidThe LID of the master SM that is managing this port.ro Unsigned32 .1.3.6.1.3.117.3.1.4.4 |
ibSmaPortIsSubnetManagerCapability flag for this node: Is Subnet Manager?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.5 |
ibSmaPortIsNoticeSupportedCapability flag for this node: Are Notices Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.6 |
ibSmaPortIsTrapSupportedCapability flag for this node: Are IBA Traps Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.7 |
ibSmaPortIsAutoMigrateSupportedCapability flag for this node: Is Automatic Migration Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.8 |
ibSmaPortIsSlMappingSupportedCapability flag for this node: Is SL Mapping Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.9 |
ibSmaPortIsMKeyNvramCapability flag for this node: Is M_Key in NVRAM?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.10 |
ibSmaPortIsPKeyNvramCapability flag for this node: Is P_Key in NVRAM?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.11 |
ibSmaPortIsLedInfoSupportedCapability flag for this node: Is LED Information Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.12 |
ibSmaPortIsSmDisabledCapability flag for this node: Is Subnet Manager Disabled?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.13 |
ibSmaPortIsSysImgGuidSupportedCapability flag for this node: Is System Image GUID Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.14 |
ibSmaPortIsPKeyExtPortTrapSupCapability flag for this node: Is P_Key Switch External Port Trap supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.15 |
ibSmaPortIsCommManageSupportedCapability flag for this node: Is Communication Management Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.16 |
ibSmaPortIsSnmpTunnelSupportedCapability flag for this node: Is SNMP Tunneling Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.17 |
ibSmaPortIsReinitSupportedCapability flag for this node: Is Reinitialization Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.18 |
ibSmaPortIsDevManageSupportedCapability flag for this node: Is Device Management Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.19 |
ibSmaPortIsVendorClassSupportedCapability flag for this node: Is Vendor Class Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.20 |
ibSmaPortIsDrNoticeSupportedCapability flag for this node: Is DR Notice Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.21 |
ibSmaPortIsCapMaskNoticSupportedCapability flag for this node: Is Capability Mask Notice Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.22 |
ibSmaPortIsBootMgmtSupportedCapability flag for this node: Is Boot Management Supported?ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.23 |
ibSmaPortMKeyLeasePeriodSpecifies the initial value of the lease period timer (in seconds). The lease period is the length of time that the M_Key Protection bits are to remain non-zero after a SubnSet(PortInfo) fails the M_Key authentication check. When the value is 0, the lease period shall never expire.ro Unsigned32 .1.3.6.1.3.117.3.1.4.24 |
ibSmaPortMKeyProtectBitsManagement Key (M_Key) protection bits.ro Enumeration .1.3.6.1.3.117.3.1.4.25 |
ibSmaPortMasterSmSlThe administrative Service Level of the master SM that is managing this port.ro Unsigned32 .1.3.6.1.3.117.3.1.4.26 |
ibSmaPortInitTypeLoadThe initialization type flags indicate the type of initialization requested by this port before SM moves it to Active or Armed state. Initialization Type flag: NoLoad. If the value is false(2), the attributes should be initialized. If the value is true(1), no data should be loaded into the attributes at all, asserting that the last-loaded data still exists and is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.27 |
ibSmaPortInitTypeContentInitialization Type flag: PreserveContent. If the value is false(2), the port makes no request regarding the content of the data that is loaded into its attributes. If it is true(1), the port is requesting that all such data, if loaded, be set to the most recent content loaded by the SM.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.28 |
ibSmaPortInitTypePresenceInitialization Type flag: PreservePresence. If the value is false(2), the port is requesting that all settable SA attributes referencing this port be removed prior to activating this port and Traps 64/65 be sent. If the value is true(1), the port is requesting that all such data be preserved, and that the traps not be sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.29 |
ibSmaPortInitTypeResuscitateInitialization Type flag: DoNotResuscitate. If the value is false(2), ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and ibSmaPortInitTypePresence ARE valid. If the value is true(1), ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and ibSmaPortInitTypePresence ARE NOT valid. The port is requesting that reinitialization of this port and the in/out of service traps (64/65) be delayed until this flag is set to false(1).ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.30 |
ibSmaPortInitNoLoadReplyThe Init Reply flags are written by the SM prior to changing the port to Active or Armed state. Initialization Type Reply flag: NoLoadReply. If this value is false(2), the port attributes were initialized. If the value is true(1), no data was loaded into the port attributes.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.31 |
ibSmaPortInitPreserveContReplyInitialization Type flag: PreserveContentReply. If this value is false(2), no information is available regarding the content of the data loaded into the port attributes. If the value is true(1), the data loaded into the port attributes was set to the content most recently loaded by the SM.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.32 |
ibSmaPortInitPreservePresReplyInitialization Type Reply flag: PreservePresenceReply. If this value is false(2), all settable SA attributes referencing this port were removed prior to activating this port and the in/out service traps 64 and 65 were sent. If the value is true(1), all such data existing when this port was last active was not removed and the traps 64/65 were not sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.4.33 |
ibSmaPortMKeyViolationsCounts the number of SMP packets that have been received at this port that have invalid M_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing its count again.ro Counter32 .1.3.6.1.3.117.3.1.4.34 |
ibSmaPortPKeyViolationsCounts the number of SMP packets that have been received at this port that have invalid P_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing its count again.ro Counter32 .1.3.6.1.3.117.3.1.4.35 |
ibSmaPortQKeyViolationsCounts the number of SMP packets that have been received at this port that have invalid Q_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing its count again.ro Counter32 .1.3.6.1.3.117.3.1.4.36 |
ibSmaPortNumGuidNumber of GUID entries supported in the GUIDInfo attribute for this port found in the ibSmaGuidInfoTable.ro Unsigned32 .1.3.6.1.3.117.3.1.4.37 |
ibSmaPortSubnetTimeoutSpecifies the maximum expected subnet propagation delay, which depends upon the configuration of the switches, to reach any other port in the subnet and shall also be used to determine the maximum rate which SubnTraps() can be sent from this port by the SMA.ro Unsigned32 .1.3.6.1.3.117.3.1.4.38 |
ibSmaPortResponseTimeValueSpecifies the expected maximum time between the port reception of a SMP and the transmission of the associated response.ro Unsigned32 .1.3.6.1.3.117.3.1.4.39 |
ibSmaDataPortInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.5 |
ibSmaPortInfoTableA table containing SMA PortInfo information. SEQUENCE OF IbSmaPortInfoEntry .1.3.6.1.3.117.3.1.5.1 |
ibSmaPortInfoEntryA conceptual row of the ibSmaPortInfoTable containing information about a particular data port and its attributes. IbSmaPortInfoEntry .1.3.6.1.3.117.3.1.5.1.1 |
ibSmaPortIndexIndex that identifies the InfiniBand data port. IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.5.1.1.1 |
ibSmaPortLinkWidthEnabledEnabled link width, indicated as follows: 0: No State Change (NOP) 1: 1x 2: 4x 3: 1x or 4x 8: 12x 9: 1x or 12x 10: 4x or 12x 11: 1x, 4x or 12x 4 - 7, 12 - 254: Reserved (Ignored) 255: Set to LinkWidthSupported value.ro Enumeration .1.3.6.1.3.117.3.1.5.1.1.2 |
ibSmaPortLinkWidthSupportedSupported link width for this port. This is indicated as follows by the SMA: 1: 1x 3: 1x or 4x 11: 1x, 4x or 12x 0, 2, 4-10, 12-255: Reserved.ro Enumeration .1.3.6.1.3.117.3.1.5.1.1.3 |
ibSmaPortLinkWidthActiveCurrently active link width on this port. This is indicated as follows by the SMA: 1: 1x 2: 4x 8: 12x 0, 3, 4-7, 9-255: Reserved.ro Enumeration .1.3.6.1.3.117.3.1.5.1.1.4 |
ibSmaPortLinkSpeedSupportedSupported link speed, indicated as follows: 1: 2.5Gbps 0, 2 - 15: reservedro Enumeration .1.3.6.1.3.117.3.1.5.1.1.5 |
ibSmaPortLinkStateThe state of the link on this port. 0: No state change 1: Down (includes failed links) 2: Initialize 3: Armed 4: Active 5-15: Reservedro Enumeration .1.3.6.1.3.117.3.1.5.1.1.6 |
ibSmaPortPhysStatePhysical Port State. Enumerated as: 0: No state change 1: Sleep 2: Polling 3: Disabled 4: PortConfigurationTraining 5: LinkUp 6: LinkErrorRecovery 7 - 15: Reservedro Enumeration .1.3.6.1.3.117.3.1.5.1.1.7 |
ibSmaPortLinkDownDefaultStateLinkDownDefault-State 0: No state change 1: Sleep 2: Polling 3-15: Reservedro Enumeration .1.3.6.1.3.117.3.1.5.1.1.8 |
ibSmaPortLidMaskCountLID Mask Control count for multipath support for CA and router ports.ro Unsigned32 .1.3.6.1.3.117.3.1.5.1.1.9 |
ibSmaPortLinkSpeedActiveCurrently active link speed, indicated as follows: 1: 2.5Gbps 0, 2 - 15: reserved.ro Enumeration .1.3.6.1.3.117.3.1.5.1.1.10 |
ibSmaPortLinkSpeedEnabledEnabled link speed, indicated as follows: 0: No State Change (NOP) 1: 2.5 Gbps 2 - 14: Reserved (Ignored) 15: Set to LinkSpeedSupported value.ro Enumeration .1.3.6.1.3.117.3.1.5.1.1.11 |
ibSmaPortNeighborMtuActive maximum MTU enabled on this port for transmit: 1: 256 bytes 2: 512 bytes 3: 1024 bytes 4: 2048 bytes 5: 4096 bytes 0, 6 - 15: reservedro Enumeration .1.3.6.1.3.117.3.1.5.1.1.12 |
ibSmaPortVirtLaneSupportVirtual Lane configuration supported on this port. Indicated as follows by the SMA: 1: VL0 2: VL0, VL1 3: VL0 - VL3 4: VL0 - VL7 5: VL0 - VL14 0, 6 - 15: reserved.ro Enumeration .1.3.6.1.3.117.3.1.5.1.1.13 |
ibSmaPortVlHighPriorityLimitLimit of High Priority component of VL Arbitration Table. This object indicates the amount of high priority packets that can be transmitted without an opportunity to send a low priority packet. Specifically, the number of bytes that can be sent is this value times 4K bytes. A 255 value means the byte limit is unbounded and a value of 0 means that only a single packet from the high-priority table may be sent before an opportunity is given to the low-priority table.ro Unsigned32 .1.3.6.1.3.117.3.1.5.1.1.14 |
ibSmaPortVlArbHighCapacityVL/Weight pairs supported on this port in the VLArbitration table (ibSmaHiPriVlArbTable) for high priority. Shall be 1 to 64 if more than one data VL is supported on this port, 0 otherwise.ro Unsigned32 .1.3.6.1.3.117.3.1.5.1.1.15 |
ibSmaPortVlArbLowCapacityVL/Weight pairs supported on this port in the VLArbitration table (ibSmaLoPriVlArbTable) for low priority. Shall be N to 64 if more than one data VL is supported on this port, 0 otherwise, N being the number of data VLs supported.ro Unsigned32 .1.3.6.1.3.117.3.1.5.1.1.16 |
ibSmaPortMtuCapacityMaximum MTU supported by this port. 1: 256 bytes 2: 512 bytes 3: 1024 bytes 4: 2048 bytes 5: 4096 bytes 0, 6 - 15: reservedro Enumeration .1.3.6.1.3.117.3.1.5.1.1.17 |
ibSmaPortVlStallCountSpecifies the number of sequential packets dropped that causes the port to enter the VLStalled state. The result of setting this value to 0 is undefined.ro Unsigned32 .1.3.6.1.3.117.3.1.5.1.1.18 |
ibSmaPortHeadOfQueueLifeSets the time a packet can live at the head of a Virtual Lane queue. This variable (HL) is used to compute the Head of the Queue Lifetime Limit (HLL). It is used in the formula when the HL value is between 0 and 19, inclusive. When HL is greater than 19, the HLL is to be interpreted as infinite.ro Unsigned32 .1.3.6.1.3.117.3.1.5.1.1.19 |
ibSmaPortOperationalVlsVirtual Lanes operational on this port, indicated as follows: 0: No change 1: VL0 2: VL0 - VL1 3: VL0 - VL3 4: VL0 - VL7 5: VL0 - VL14 6 - 15: reservedro Enumeration .1.3.6.1.3.117.3.1.5.1.1.20 |
ibSmaPortPartEnforceInboundIndicates support of optional inbound partition enforcement. If true, partition enforcement on packets received on this port is enabled. If false partition enforcement on packets received from this port is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.5.1.1.21 |
ibSmaPortPartEnforceOutboundIndicates support of optional outbound partition enforcement. If true, partition enforcement on packets transmitted on this port is enabled. If false partition enforcement on packets transmitted from this port is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.5.1.1.22 |
ibSmaPortFilterRawPktInboundIndicates support of optional inbound raw packet enforcement. If true, raw packets arriving on this port are discarded. If false, raw enforcement on packets received from this port is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.5.1.1.23 |
ibSmaPortFilterRawPktOutboundIndicates support of optional outbound raw packet enforcement. If true, raw packets departing on this port are discarded. If false, raw enforcement on packets leaving from this port is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.5.1.1.24 |
ibSmaPortLocalPhysErrorThresholdLocal Physical Error threshold value. When the count of marginal link errors exceeds this threshold, the local link integrity error shall be detected.ro Unsigned32 .1.3.6.1.3.117.3.1.5.1.1.25 |
ibSmaPortOverrunErrorThresholdOverrun error threshold value. When the count of buffer overruns over consecutive flow control update periods exceeds this threshold, the excessive buffer overrun error shall be detected.ro Unsigned32 .1.3.6.1.3.117.3.1.5.1.1.26 |
ibSmaPKeyInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.6 |
ibSmaPKeyTableThis table contains SMA Partition Key information for this port. SEQUENCE OF IbSmaPKeyEntry .1.3.6.1.3.117.3.1.6.1 |
ibSmaPKeyEntryA conceptual row of the ibSmaPKeyTable containing information about the partition keys. IbSmaPKeyEntry .1.3.6.1.3.117.3.1.6.1.1 |
ibSmaPKeyIBAPortIndexThe IB data port index for the switch data ports. For switch management port 0 and for CAs and routers, the index value should be 255. This indicates that the entry is not referring to a valid switch data port. IbDataPortAndInvalid (IB-TC-MIB) .1.3.6.1.3.117.3.1.6.1.1.1 |
ibSmaPKeyIndexThe entry Identifier for each Partition Key defined on a port. (The IB spec specifies 0..2047 blocks of 32 entries each for a total of 65,504 maximum entries, although the implemented limit is defined by PartitionCap for CAs, routers, and switch port 0, and by PartitionEnforcementCap for the switch data ports). Unsigned32 .1.3.6.1.3.117.3.1.6.1.1.2 |
ibSmaPKeyMembershipIf the P_Key type is limited(2), the switch may accept a packet with a matching full P_Key, but may not accept a packet with a matching limited key. If the P_Key type is full(3), the switch can accept packets with either a full or limited P_Key. If the P_Key type is none(1), there is no associated Key Base value.ro Enumeration .1.3.6.1.3.117.3.1.6.1.1.3 |
ibSmaPKeyBase15-bit base value of the P_Key that the switch will use to check against incoming packets.ro Unsigned32 .1.3.6.1.3.117.3.1.6.1.1.4 |
ibSmaSlToVlMapInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.7 |
ibSmaSL2VLMapTableThis table provides the virtual lane value for the output port/input port/service level mapping. Each output port contains a VL mapping for the next hop based on the input port the packet arrived on and its SL value. SEQUENCE OF IbSmaSL2VLMapEntry .1.3.6.1.3.117.3.1.7.1 |
ibSmaSL2VLMapEntryColumn definitions for the VL from output/input/SL entry. IbSmaSL2VLMapEntry .1.3.6.1.3.117.3.1.7.1.1 |
ibSmaIBAOutPortIndexThe egress port index for the service level mapping. A value of 255 indicates the switch management port 0. IbDataPortAndInvalid (IB-TC-MIB) .1.3.6.1.3.117.3.1.7.1.1.1 |
ibSmaIBAInPortIndexThe ingress port index for the service level mapping. A value of 255 indicates the switch management port 0. IbDataPortAndInvalid (IB-TC-MIB) .1.3.6.1.3.117.3.1.7.1.1.2 |
ibSmaServiceLevelIndexThe Service Level value index for this mapping. Unsigned32 .1.3.6.1.3.117.3.1.7.1.1.3 |
ibSmaVirtualLaneThe outgoing packet's Virtual Lane value for this Service Level Mapping.ro Unsigned32 .1.3.6.1.3.117.3.1.7.1.1.4 |
ibSmaVLArbitInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.8 |
ibSmaHiPriVlArbTableThis table provides visibility into the High Priority Arbitration process for configuring VL/Weight pairs for the IB data ports. SEQUENCE OF IbSmaHiPriVlArbEntry .1.3.6.1.3.117.3.1.8.1 |
ibSmaHiPriVlArbEntryColumn definitions for High Priority Arbitration Table. IbSmaHiPriVlArbEntry .1.3.6.1.3.117.3.1.8.1.1 |
ibSmaHiPriIBAPortIndexThe index for the configured IBA port. IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.8.1.1.1 |
ibSmaHiPriNIndexThe High Priority list index. Unsigned32 .1.3.6.1.3.117.3.1.8.1.1.2 |
ibSmaHiPriVirtLaneThe virtual lane this entry applies to.ro Unsigned32 .1.3.6.1.3.117.3.1.8.1.1.3 |
ibSmaHiPriWeightNumber of 64-byte units that may be transmitted from this VL when its turn in the arbitration process occurs. A weight of 0 indicates that the entry should be skipped.ro Unsigned32 .1.3.6.1.3.117.3.1.8.1.1.4 |
ibSmaLowPriVlArbTableThis table provides visibility into the Low Priority Arbitration process. SEQUENCE OF IbSmaLowPriVlArbEntry .1.3.6.1.3.117.3.1.8.2 |
ibSmaLowPriVlArbEntryColumn definitions for Low Priority Arbitration Table. IbSmaLowPriVlArbEntry .1.3.6.1.3.117.3.1.8.2.1 |
ibSmaLowPriIBAPortIndexThe index for the configured IB data port. IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.8.2.1.1 |
ibSmaLowPriNIndexThe Low Priority list index. Unsigned32 .1.3.6.1.3.117.3.1.8.2.1.2 |
ibSmaLowPriVirtLaneThe Virtual Lane this entry applies to.ro Unsigned32 .1.3.6.1.3.117.3.1.8.2.1.3 |
ibSmaLowPriWeightNumber of 64-byte units that may be transmitted from this VL when its turn in the arbitration process occurs. A weight of 0 indicates that the entry should be skipped.ro Unsigned32 .1.3.6.1.3.117.3.1.8.2.1.4 |
ibSmaLFTInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.9 |
ibSmaLinForTableA table containing information about the Linear Forwarding Table. SEQUENCE OF IbSmaLinForEntry .1.3.6.1.3.117.3.1.9.1 |
ibSmaLinForEntryCurrent unicast forwarding Table entry configured by the Subnet Manager based on destination LID. IbSmaLinForEntry .1.3.6.1.3.117.3.1.9.1.1 |
ibSmaLinDestDLIDIndexIndex that identifies Destination Local Identifier (DLID) that the forwarding entry refers to in the Linear Forwarding Table. IbUnicastLid (IB-TC-MIB) .1.3.6.1.3.117.3.1.9.1.1.1 |
ibSmaLinForwEgressPortThe port to which packets with the LID corresponding to this entry are to be forwarded.ro IbDataPortAndInvalid (IB-TC-MIB) .1.3.6.1.3.117.3.1.9.1.1.2 |
ibSmaRFTInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.10 |
ibSmaRandomForwardingTableA table containing SMA Random Forwarding information. SEQUENCE OF IbSmaRandomForwardingEntry .1.3.6.1.3.117.3.1.10.1 |
ibSmaRandomForwardingEntryA conceptual row of the ibSmaRandomForwardingTable containing information about the Random Forwarding Table. IbSmaRandomForwardingEntry .1.3.6.1.3.117.3.1.10.1.1 |
ibSmaRandomForwardingPortIndexThe port index value. IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.10.1.1.1 |
ibSmaRandomDestLIDIdentifies Destination Local Identifier (DLID) that the forwarding entry refers to.ro Unsigned32 .1.3.6.1.3.117.3.1.10.1.1.2 |
ibSmaRandomForwEgressPortThe port to which packets with the LID corresponding to this entry are to be forwarded.ro IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.10.1.1.3 |
ibSmaRandomLMCThe LID Mask Control (LMC) of this LID. The LMC specifies the number of Path Bits in the Local Identifier.ro Unsigned32 .1.3.6.1.3.117.3.1.10.1.1.4 |
ibSmaRandomIsValidIf true, this LID/Port pair is valid. Note that when the SMA sets this parameter to false(2), entries can be removed.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.10.1.1.5 |
ibSmaMFTInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.11 |
ibSmaMulForTableA table containing information about the Multicast Forwarding Table. SEQUENCE OF IbSmaMulForEntry .1.3.6.1.3.117.3.1.11.1 |
ibSmaMulForEntryCurrent multicast forwarding table entry as configured by the Subnet Manager based on destination LID. IbSmaMulForEntry .1.3.6.1.3.117.3.1.11.1.1 |
ibSmaMulDestDLIDIndexIdentifies Destination Local Identifier (DLID) that the forwarding entry refers to in the Multicast Forwarding Table. IbMulticastLid (IB-TC-MIB) .1.3.6.1.3.117.3.1.11.1.1.1 |
ibSmaMulForwMaskA 256-bit mask that represents the port list. An incoming packet with this LID table entry will be forwarded to all ports for which the bit in the port mask is set to 1.ro IbSmPortList (IB-TC-MIB) .1.3.6.1.3.117.3.1.11.1.1.2 |
ibSmaSMInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.12 |
ibSmaSubMgrInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.12.1 |
ibSmaSmInfoTableA table containing SMA Subnet Manager information. SEQUENCE OF IbSmaSmInfoEntry .1.3.6.1.3.117.3.1.12.1.1 |
ibSmaSmInfoEntryA conceptual row of the ibSmaSmInfoTable containing information about the Subnet Manager Table. IbSmaSmInfoEntry .1.3.6.1.3.117.3.1.12.1.1.1 |
ibSmaSmInfoPortIndexThe port index value. IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.12.1.1.1.1 |
ibSmaSmGuidThe Port GUID of the port where the SM resides.ro IbGuid (IB-TC-MIB) .1.3.6.1.3.117.3.1.12.1.1.1.2 |
ibSmaSmSmKeyKey for this SM. This is shown as zeroes unless the requesting SM is proven to be the master, or the requester is otherwise authenticated.ro OCTET STRING .1.3.6.1.3.117.3.1.12.1.1.1.3 |
ibSmaSmSmpCountCounter that increments each time the SM issues an SMP or performs other management activities. This counter is used as a heartbeat indicator by standby SMs.ro Counter32 .1.3.6.1.3.117.3.1.12.1.1.1.4 |
ibSmaSmPriorityAdministratively assigned priority for this SM. This can be reset by master SM. 0 is the lowest priority. An out-of-band mechanism shall be provided to set this value. The default value SHALL be 0.ro Unsigned32 .1.3.6.1.3.117.3.1.12.1.1.1.5 |
ibSmaSmStateEnumerated value indicating this SM's state. The InfiniBand enumeration values are: 0 - not active 1 - discovering 2 - standby 3 - master 4-15 - reserved. Note: a value of reserved returns unknown(5).ro Enumeration .1.3.6.1.3.117.3.1.12.1.1.1.6 |
ibSmaVendDiagInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.13 |
ibSmaVendDiagInfoTableA table containing SMA Vendor Diagnostic Info information. SEQUENCE OF IbSmaVendDiagInfoEntry .1.3.6.1.3.117.3.1.13.1 |
ibSmaVendDiagInfoEntryA conceptual row of the ibSmaVendDiagInfoTable containing information about a particular data port's diagnostic status. IbSmaVendDiagInfoEntry .1.3.6.1.3.117.3.1.13.1.1 |
ibSmaVendDiagPortIndexIndex that identifies the port for the diagnostics. If the index value is 255, information about the management port is returned. IbDataPortAndInvalid (IB-TC-MIB) .1.3.6.1.3.117.3.1.13.1.1.1 |
ibSmaPortGenericDiagCodeThe generic portion of the Port Info Diagnostic code.ro Enumeration .1.3.6.1.3.117.3.1.13.1.1.2 |
ibSmaPortVendorDiagCodeThe vendor specific portion of the Port Info Diagnostic code.ro Unsigned32 .1.3.6.1.3.117.3.1.13.1.1.3 |
ibSmaPortVendorDiagIndexFwdFlag to control ibSmaPortVendorDiagData data buffer. If this boolean is true(1), the data buffer contains meaningful vendor-supplied additional diagnostic information. If this object is false(2), the buffer is empty.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.117.3.1.13.1.1.4 |
ibSmaPortVendorDiagDataData buffer that can contain additional vendor-specific diagnostic information. The ibSmaPortVendorDiagIndexFwd flag controls whether this object contains meaningful data. Note: in IB, this buffer comprises n number of 62 byte buffers. This object defines a buffer that can hold up to 2 of these IB chained buffers.ro OCTET STRING .1.3.6.1.3.117.3.1.13.1.1.5 |
ibSmaLedInfo OBJECT IDENTIFIER .1.3.6.1.3.117.3.1.14 |
ibSmaLedInfoTableA table containing SMA LED Info information. SEQUENCE OF IbSmaLedInfoEntry .1.3.6.1.3.117.3.1.14.1 |
ibSmaLedInfoEntryA conceptual row of the ibSmaLedInfoTable containing information about a particular data port's LED status. IbSmaLedInfoEntry .1.3.6.1.3.117.3.1.14.1.1 |
ibSmaLedIndexIndex that identifies the IB data port with its LED. IbDataPort (IB-TC-MIB) .1.3.6.1.3.117.3.1.14.1.1.1 |
ibSmaLedStateState of the LED.ro Enumeration .1.3.6.1.3.117.3.1.14.1.1.2 |
ibSmaNotifications OBJECT IDENTIFIER .1.3.6.1.3.117.3.2 |
ibSmaNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.3.117.3.2.0 |
ibSmaPortLinkStateChangeThis notification translates InfiniBand SMA Trap 128: Link State of at least one port of switch at <LIDADDR> has changed. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.1 |
ibSmaLinkIntegrityThresReachedThis notification translates InfiniBand SMA Trap 129: Local Link Integrity threshold reached at <LIDADDR><PORTNO>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.2 |
ibSmaExcessBuffOverrunThresThis notification translates InfiniBand SMA Trap 130: Excessive Buffer Overrun threshold reached at <LIDADDR><PORTNO>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.3 |
ibSmaFlowCntrlUpdateTimerExpireThis notification translates InfiniBand SMA Trap 131: Switch Flow Control Update watchdog timer expired at <LIDADDR><PORTNO>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.4 |
ibSmaCapabilityMaskModifiedThis notification translates InfiniBand SMA Trap 144: The capability mask at <LIDADDR> has been modified to <CAPMASK>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.5 |
ibSmaSysImageGuidModifiedThis notification translates InfiniBand SMA Trap 145: The System Image GUID at <LIDADDR> has been modified to <SYSTEMIMAGEGUID>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.6 |
ibSmaBadManagementKeyThis notification translates InfiniBand SMA Trap 256: Bad M_Key, <KEY> from <LIDADDR> attempted <METHOD> with <ATTRIBUTEID> and <ATTRIBUTEMODIFIER>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.7 |
ibSmaBadPartitionKeyThis notification translates InfiniBand SMA Trap 257: Bad P_Key, <KEY> from <LIDADDR1> /<GIDADDR1>/<QP1> to <LIDADDR2>/<GIDADDR2>/<QP2> on <SL>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.8 |
ibSmaBadQueueKeyThis notification translates InfiniBand SMA Trap 258: Bad Q_Key, <KEY> from <LIDADDR1>/<GIDADDR1>/<QP1> to <LIDADDR2>/<GIDADDR2>/<QP2> on <SL>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.9 |
ibSmaBadPKeyAtSwitchPortThis notification translates InfiniBand SMA Trap 259: Bad P_Key, <KEY> from <LIDADDR1> /<GIDADDR1>/<QP1> to <LIDADDR2>/<GIDADDR2>/<QP2> on <SL> at switch <LIDADRR> external port <PORTNO>, where the validity of the fields is indicated by <DataValid>. NOTIFICATION-TYPE .1.3.6.1.3.117.3.2.0.10 |
ibSmaConformance OBJECT IDENTIFIER .1.3.6.1.3.117.3.3 |
ibSmaCompliances OBJECT IDENTIFIER .1.3.6.1.3.117.3.3.1 |
ibSmaBasicNodeComplianceThe basic node implementation requirements for agents that support the IPOIB SMA MIB. Unknown .1.3.6.1.3.117.3.3.1.1 |
ibSmaFullSwitchComplianceThe full node implementation requirements for agents that support the IPOIB SMA MIB for InfiniBand switches. Unknown .1.3.6.1.3.117.3.3.1.2 |
ibSmaFullRouterCAComplianceThe full node implementation requirements for agents that support the IPOIB SMA MIB for InfiniBand CAs and routers. Unknown .1.3.6.1.3.117.3.3.1.3 |
ibSmaGroups OBJECT IDENTIFIER .1.3.6.1.3.117.3.3.2 |
ibSmaNodeGroupThe ibSmaNodeGroup defines the MIB objects that describe this InfiniBand subnet node. Unknown .1.3.6.1.3.117.3.3.2.1 |
ibSmaSwitchGroupThe ibSmaSwitchGroup defines the MIB objects that describe this InfiniBand switch. Unknown .1.3.6.1.3.117.3.3.2.2 |
ibSmaGuidGroupThe ibSmaGuidGroup defines the MIB object that describes the GUIDs associated with this node. Unknown .1.3.6.1.3.117.3.3.2.3 |
ibSmaMgmtPortGroupThe ibSmaMgmtPortGroup defines the MIB objects that describe the management port. Unknown .1.3.6.1.3.117.3.3.2.4 |
ibSmaDataPortGroupThe ibSmaDataPortGroup defines MIB objects for IB data ports. Unknown .1.3.6.1.3.117.3.3.2.5 |
ibSmaPKeyGroupThe ibSmaPKeyGroup defines the MIB objects that describe the Partition Keys. Unknown .1.3.6.1.3.117.3.3.2.6 |
ibSmaSlToVlMapGroupThe ibSmaSlToVlMapGroup defines the MIB objects that describe the Service Level to Virtual Lane mapping. Unknown .1.3.6.1.3.117.3.3.2.7 |
ibSmaVLArbitGroupThe ibSmaVLArbitGroup defines the MIB objects that describe the Virtual Lane High and Low Arbitrations. Unknown .1.3.6.1.3.117.3.3.2.8 |
ibSmaLFTGroupThe ibSmaLFTGroup defines the MIB objects that describe the Linear Forwarding Table. Unknown .1.3.6.1.3.117.3.3.2.9 |
ibSmaRFTGroupThe ibSmaRFTGroup defines the MIB objects that describe the Random Forwarding Table. Unknown .1.3.6.1.3.117.3.3.2.10 |
ibSmaMFTGroupThe ibSmaMFTGroup defines the MIB objects that describe the Multicast Forwarding Table. Unknown .1.3.6.1.3.117.3.3.2.11 |
ibSmaSMGroupThe ibSmaSMGroup defines the MIB objects that describe the Subnet Manager Information Table. Unknown .1.3.6.1.3.117.3.3.2.12 |
ibSmaVendDiagGroupThe ibSmaVendDiagGroup defines the MIB objects that describe the vendor diagnostics table. Unknown .1.3.6.1.3.117.3.3.2.13 |
ibSmaLedGroupThe ibSmaSMGroup defines the MIB objects that describe the LED table. Unknown .1.3.6.1.3.117.3.3.2.14 |
ibSmaNotificationsGroupThe notifications that an IPOIB SNMP agent transmits on the behalf of the SMA Trap message implementation. Unknown .1.3.6.1.3.117.3.3.2.15 |