HPNSACAGE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HPNSACAGE-MIB.
41
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
hp OBJECT IDENTIFIER .1.3.6.1.4.1.11 |
RFC1213-MIB Unknown .1.3.6.1.4.1.11 |
nm OBJECT IDENTIFIER .1.3.6.1.4.1.11.2 |
hpnsa OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.23 |
hpCageAgt OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.23.28 |
hpCageAgtVersionThe current version (major) number of the SNMP agent.ro INTEGER .1.3.6.1.4.1.11.2.23.28.1 |
hpCageAgtRevisionThe current revision (minor) number of the SNMP agent.ro INTEGER .1.3.6.1.4.1.11.2.23.28.2 |
hpCageAgtMibVersionThe current version (major) number of the SNMP agent's MIB.ro INTEGER .1.3.6.1.4.1.11.2.23.28.3 |
hpCageAgtMibRevisionThe current revision (minor) number of the SNMP agent's MIB.ro INTEGER .1.3.6.1.4.1.11.2.23.28.4 |
hpCageAgtnDrieCagesThe number of Starfish drive cages present on the system.ro INTEGER .1.3.6.1.4.1.11.2.23.28.5 |
hpCageAgtcbDriveCageInfoThe number of bytes required to represent the drive cage information struucture.ro INTEGER .1.3.6.1.4.1.11.2.23.28.6 |
hpCageAgtDriveCageInfoThe drive cage information structure, defining the state and addresses of each drive bay.ro Opaque .1.3.6.1.4.1.11.2.23.28.7 |
hpCageAgtDriveCageStatusThe result of the last query operation for drive cage data. This value is set by querying the hpCageAgtDriveCageInfo object.ro INTEGER .1.3.6.1.4.1.11.2.23.28.8 |
hpCageAgtFlashAdptrTypeThe type of adapter to be flashed. This must be set prior to setting the flash count.rw INTEGER .1.3.6.1.4.1.11.2.23.28.9 |
hpCageAgtFlashAdptrNumThe adapter number to be flashed. This must be set prior to setting the flash count.rw INTEGER .1.3.6.1.4.1.11.2.23.28.10 |
hpCageAgtChannelNumThe channel number to be flashed. This must be set prior to setting the flash count.rw INTEGER .1.3.6.1.4.1.11.2.23.28.11 |
hpCageAgtFlashCountThe number of times to activate the flashing of the LEDs. (See members 9, 10, and 11.)rw INTEGER .1.3.6.1.4.1.11.2.23.28.12 |
hpCageAgtFlashStatusThe resulting status of the last setting of the flash count operation. If this value is 99999999, then the operation is still pending.ro INTEGER .1.3.6.1.4.1.11.2.23.28.13 |
hpCageAgtnDrivesThe number of hot-swap drives present on the system. Requery the nDriveCages field to recalculate this field.ro INTEGER .1.3.6.1.4.1.11.2.23.28.14 |
hpCageAgtDriveTableA list of the hot-swap drives present on the system. SEQUENCE OF HpCageAgtDriveEntryDef .1.3.6.1.4.1.11.2.23.28.15 |
hpCageAgtDriveEntry HpCageAgtDriveEntryDef .1.3.6.1.4.1.11.2.23.28.15.1 |
hpCageAgtDriveIndexThe index number of the drive.ro INTEGER .1.3.6.1.4.1.11.2.23.28.15.1.1 |
hpCageAgtDriveI2cAddrThe IIC (I-square-C) bus address of the drive.ro INTEGER .1.3.6.1.4.1.11.2.23.28.15.1.2 |
hpCageAgtDriveScsiIDThe SCSI target ID of the drive (unique to the IIC bus).ro INTEGER .1.3.6.1.4.1.11.2.23.28.15.1.3 |
hpCageAgtDriveLEDStateThe state of the drive LED, which can be set to amber (on).rw Enumeration .1.3.6.1.4.1.11.2.23.28.15.1.4 |
hpCageAgtDriveLEDSetStatusThe result of the last LED state change operation for this drive.ro INTEGER .1.3.6.1.4.1.11.2.23.28.15.1.5 |
hpCageAgtDrivePresentIs a drive present in this drive cage bay?ro Enumeration .1.3.6.1.4.1.11.2.23.28.15.1.6 |
hpCageAgtCageChannelThe channel number on the SCSI adapter to which this cage is connected.ro INTEGER .1.3.6.1.4.1.11.2.23.28.15.1.7 |
hpCageAgtCageAdapterThe port number of the SCSI adapter to which this cage is connected.ro INTEGER .1.3.6.1.4.1.11.2.23.28.15.1.8 |
hpCageAgtCageTypeThe type of the hot-swap cage.ro Enumeration .1.3.6.1.4.1.11.2.23.28.15.1.9 |
hpCageAgtTargetIDThe channel number to be flashed. This must be set prior to setting the flash count.rw INTEGER .1.3.6.1.4.1.11.2.23.28.16 |
hpCageAgtFlashOneCountThe number of times to activate the flashing of one LED. (See members 9, 10, 11, and 16.)rw INTEGER .1.3.6.1.4.1.11.2.23.28.17 |
hpCageAgtFWStatusThe resulting status of the last firmware update operation. If this value is 99999999, then the operation is still pending.ro INTEGER .1.3.6.1.4.1.11.2.23.28.18 |
hpCageAgtUpdateDriveFWSet this value to the key 746E654Bh to begin updating firmware on drive indicated in SCSI ID. (See members 9, 10, 11, and 16.)rw INTEGER .1.3.6.1.4.1.11.2.23.28.19 |
hpCageAgtDriveReadinessDetermine the state of readiness for the drive. (See members 9, 10, 11, and 16.)ro Enumeration .1.3.6.1.4.1.11.2.23.28.20 |
hpCageAgtDownloadWwwUrlSet this value to the URL to begin downloading. Check member 21 for progress and 22 for status.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.23.28.21 |
hpCageAgtDownloadSizeCurrent size (in bytes) of the amount of data downloaded for this file. If less than 10 bytes reported, size is actually state info: (0 = no download, 1 = download in progress, 2 = download complete, 3 = download failed).ro INTEGER .1.3.6.1.4.1.11.2.23.28.22 |
hpCageAgtDownloadStatusThe resulting status of the most recent (or current) WWW download operation. If this value is 99999999, then the operation is still pending.ro INTEGER .1.3.6.1.4.1.11.2.23.28.23 |
hpCageAgtDownloadProxySet this value to the WWW proxy server spec (eg: WWW_PROXY.XXX.COM:8088).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.23.28.24 |
hpCageAgtFormatDriveSet this value to the key 6B72614Dh to begin formatting drive indicated in SCSI ID. (See members 9, 10, 11, and 16.)rw INTEGER .1.3.6.1.4.1.11.2.23.28.25 |
hpCageAgtFormatStatusThe resulting status of the last formatoperation. If this value is 99999999, then the operation is still pending. If 99999990, then user input is pending allowing the operation locally.rw INTEGER .1.3.6.1.4.1.11.2.23.28.26 |