HPN-ICF-VOICE-IF-MIB
This MIB file is to provide the definition of the voice interface general configuration.
Main OID:
hpnicfVoiceInterface.1.3.6.1.4.1.11.2.14.11.15.2.39.13
14
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
hpnicfVoiceInterfaceThis MIB file is to provide the definition of the voice interface general configuration. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.39.13 |
hpnicfVoiceIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1 |
hpnicfVoiceIfConfigTableThe table contains configurable parameters for both analog voice interface and digital voice interface. SEQUENCE OF HPN-ICFVoiceIfConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1 |
hpnicfVoiceIfConfigEntryThe entry of voice interface table. HPN-ICFVoiceIfConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1 |
hpnicfVoiceIfCfgCngOnThis object indicates whether the silence gaps should be filled with background noise. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.1 |
hpnicfVoiceIfCfgNonLinearSwitchThis object expresses the nonlinear processing is enable or disable for the voice interface. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. Currently, only digital voice subscriber lines can be set disabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.2 |
hpnicfVoiceIfCfgInputGainThis object indicates the amount of gain added to the receiver side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.rw Integer32(-140..139) .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.3 |
hpnicfVoiceIfCfgOutputGainThis object indicates the amount of gain added to the send side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.rw Integer32(-140..139) .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.4 |
hpnicfVoiceIfCfgEchoCancelSwitchThis object indicates whether the echo cancellation is enabled. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.5 |
hpnicfVoiceIfCfgEchoCancelDelayThis object indicates the delay of the echo cancellation for the voice interface. This value couldn't be modified unless hpnicfVoiceIfCfgEchoCancelSwitch is enable. Unit is milliseconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. The default value of this object is 32.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.6 |
hpnicfVoiceIfCfgTimerDialIntervalThe interval, in seconds, between two dialing numbers. The default value of this object is 10 seconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7 |
hpnicfVoiceIfCfgTimerFirstDialThe period of time, in seconds, before dialing the first number. The default value of this object is 10 seconds. It is applicable to FXO, FXS subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.8 |
hpnicfVoiceIfCfgPrivatelineThis object indicates the E.164 phone number for plar mode. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.9 |
hpnicfVoiceIfCfgRegToneThis object uses 2 or 3 letter country code specify voice parameters of different countrys. This value will take effect on all voice interfaces of all cards on the device.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.10 |
More MIBs from HP
Browse all HPMIBs →BLADETYPE6-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE6-NETWORK-MIB.
2263 objects→
BLADETYPE5-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE5-NETWORK-MIB.
2240 objects→
BLADETYPE4-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE4-NETWORK-MIB.
2226 objects→
HPN-ICF-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HPIPFTRAP-MIB
Standard SNMP MIB module defining data structures for HPIPFTRAP-MIB.
1186 objects→
BLADETYPE2-NETWORK-MIB
The BLADETYPE2-NETWORK-MIB module provides SNMP access to Layer 3 configuration parameters, interface statistics, and routing information for blade server network interfaces. It enables monitoring of IP address assignments, interface operational states, and packet counters specific to the blade chassis network subsystem.
1056 objects→