HPN-ICF-VOICE-CALL-ACTIVE-MIB
AI MIB Summary
The HPN-ICF-VOICE-CALL-ACTIVE-MIB defines the data structures for monitoring active voice call sessions on Hewlett Packard Enterprise (HPE) Intelligent Call Flow (ICF) telephony gateways. It enables SNMP-based tracking of real-time call state records, including session counts and call identifiers, to facilitate capacity planning and service availability verification.
This MIB file is to provide the definition of voice call active record information.
Main OID:
hpnicfVoCallActive.1.3.6.1.4.1.11.2.14.11.15.2.39.15
22
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
hpnicfVoCallActiveThis MIB file is to provide the definition of voice call
active record information. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.39.15 |
IMPORTSThis MIB file is to provide the definition of voice call
active record information. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.39.15 |
hpnicfVoiceCallActiveObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1 |
hpnicfVoiceCallActiveTableThis table is the voice extension to the call active table
of DIAL-CONTROL-MIB. It contains voice encapsulation call
leg information that is derived from the statistics
of lower layer telephony interface. SEQUENCE OF HpnicfVoiceCallActiveEntry .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1 |
hpnicfVoiceCallActiveEntryThe information regarding a single voice encapsulation
call leg.
The call leg entry is identified by using the same index
objects that are used by call active table of
DIAL-CONTROL-MIB to identify the call.
An entry of this table is created when its associated call
active entry in the DIAL-CONTROL-MIB is created and
call active entry contains the call establishment to a
voice over telephony network peer.
The entry is deleted when its associated call active entry
in the DIAL-CONTROL-MIB is deleted. HpnicfVoiceCallActiveEntry .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1 |
hpnicfVoCallActiveConnectionIdThe global call identifier for the gateway call.ro HpnicfGUid .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.1 |
hpnicfVoCallActiveTxDurationDuration of transmit path open from this peer to the
voice gateway for the call. The units is milliseconds.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.2 |
hpnicfVoCallActiveVoiceTxDurationDuration of voice transmitted from this peer to voice
gateway for this call. The voice utilization rate can be
obtained by dividing this by hpnicfVoCallActiveTXDuration object.
The units is milliseconds.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.3 |
hpnicfVoCallActiveFaxTxDurationDuration of fax transmitted from this peer to voice gateway
for this call. The fax utilization rate can be obtained by
dividing this by hpnicfVoCallActiveTXDuration object. The units
is milliseconds.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.4 |
hpnicfVoCallActiveCoderTypeThe negotiated coder type. It specifies the encode type to
the PSTN leg of a call.ro HpnicfCodecType (HPN-ICF-VOICE-DIAL-CONTROL-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.5 |
hpnicfVoCallActiveImgPageCountThe number of fax related image pages are received or
transmitted via the peer for the call. The units is pages.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.6 |
hpnicfVoiceVoIPCallActiveTableThis table is the VoIP extension to the call active table of
DIAL-CONTROL-MIB. It contains VoIP call leg
information about specific VoIP call destination. SEQUENCE OF HpnicfVoiceVoIPCallActiveEntry .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2 |
hpnicfVoiceVoIPCallActiveEntryThe information regarding a single VoIP call leg.
The call leg entry is identified by using the same index
objects that are used by call active table of DIAL-CONTROL-MIB
to identify the call.
An entry of this table is created when its associated call
active entry in the DIAL-CONTROL-MIB is created and the
call active entry contains information for the call
establishment to the peer on the IP backbone via a voice
over IP peer.
The entry is deleted when its associated call active entry
in the DIAL-CONTROL-MIB is deleted. HpnicfVoiceVoIPCallActiveEntry .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1 |
hpnicfVoVoIPCallActiveConnectionIdThe global call identifier for the gateway call.ro HpnicfGUid .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.1 |
hpnicfVoVoIPCallActiveRemSigIPTypeThe type of remote system signalling IP address for the VoIP call.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.2 |
hpnicfVoVoIPCallActiveRemSigIPAddrRemote system signalling IP address for the VoIP call.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.3 |
hpnicfVoVoIPCallActiveRemSigPortRemote system UDP listener signalling port to which to transmit voice
packets.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.4 |
hpnicfVoVoIPCallActiveRemMedIPTypeThe type of remote system media IP address for the VoIP call.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.5 |
hpnicfVoVoIPCallActiveRemMedIPAddrRemote system media IP address for the VoIP call.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.6 |
hpnicfVoVoIPCallActiveRemMedPortRemote system UDP listener media port to which to transmit voice
packets.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.7 |
hpnicfVoVoIPCallActiveSessProtocolThe object specifies the session protocol to be used
for internet call between local and remote router via
IP backbone.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.8 |
hpnicfVoVoIPCallActiveCoderTypeThe negotiated coder type. It specifies the encode type to
the VoIP leg of a call.ro HpnicfCodecType (HPN-ICF-VOICE-DIAL-CONTROL-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.9 |