HPN-ICF-UNICAST-MIB
AI MIB Summary
The HPN-ICF-UNICAST-MIB module monitors unicast forwarding and routing state variables, including interface statistics, forwarding table entries, and packet counters, on Hewlett Packard Enterprise (HPE) networking hardware. It provides the specific OID structure required to track unicast traffic flow metrics and interface operational status for network performance analysis and fault isolation.
This MIB is a framework MIB for unicast related features.
Main OID:
hpnicfUnicast.1.3.6.1.4.1.11.2.14.11.15.2.44
9
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
9 total| Object Name |
|---|
hpnicfUnicastThis MIB is a framework MIB for unicast related features. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.44 |
hpnicfURPFTableUnicast Reverse Path Forwarding (URPF) is used to prevent the network attacks caused by source address spoofing. This table is used to configure URPF on specific interfaces. SEQUENCE OF HpnicfURPFEntry .1.3.6.1.4.1.11.2.14.11.15.2.44.1 |
hpnicfURPFEntryThe entry of hpnicfURPFTable, indexed by vlan interface index. HpnicfURPFEntry .1.3.6.1.4.1.11.2.14.11.15.2.44.1.1 |
hpnicfURPFIfIndexThe ifIndex of vlan interface. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.1 |
hpnicfURPFEnabledThis object is used to enable or disable URPF on certain vlan interfaces.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.2 |
hpnicfURPFSlotIDThis object specifies to which slot packets are redirected in order to perform URPF check.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.3 |
hpnicfURPFTotalReceivedPacketThis object provides total received packets number.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.4 |
hpnicfURPFDroppedPacketThis object provides total dropped invalid packets number.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.5 |
hpnicfURPFClearStatThis object is used to clear the URPF statistics on certain vlan interfaces. This object is actually a write-only object. When read, it always returns 0. When set to 1, the objects hpnicfURPFTotalReceivedPacket and hpnicfURPFDroppedPacket are reset to 0.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.6 |