HPN-ICF-TRAP-MIB
AI MIB Summary
The HPN-ICF-TRAP-MIB module defines SNMP trap definitions for Hewlett Packard Enterprise (HPE) Intelligent Control Framework (ICF) components, enabling the notification of critical events and state changes across HPE routers and switches. It facilitates the monitoring of hardware and software anomalies, such as interface status transitions, resource threshold breaches, and system faults, by mapping specific trap OIDs to actionable alerting mechanisms.
This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
Main OID:
hpnicfTrap.1.3.6.1.4.1.11.2.14.11.15.2.38
75
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
hpnicfTrapThis MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.38 |
hpnicfTableGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1 |
hpnicfMacTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.1 |
hpnicfMacTabTrapEnableIndicates whether hpnicfMacTabFullTrap and hpnicfMacTabAlmostFullTrap traps should be generated when the MAC table is filled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.1 |
hpnicfMacTabTrapIntervalDefinition of the minimum interval between two traps which occur when the MAC table is full or two traps which occur when the MAC table is almost full.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.2 |
hpnicfMacTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.3 |
hpnicfMacTabLenThe length of the MAC table.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.3.1 |
hpnicfMacTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4 |
hpnicfMacTabFullTrapSend this trap when the MAC table is filled. The interval between two traps generated should be longer than hpnicfMacTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4.1 |
hpnicfMacTabAlmostFullTrapSend this trap when the MAC table is almost full. The interval between two traps generated should be longer than hpnicfMacTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4.2 |
hpnicfArpTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.2 |
hpnicfArpTabTrapEnableIndicates whether hpnicfArpTabFullTrap traps should be generated when the ARP table is filled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.1 |
hpnicfArpTabTrapIntervalDefinition of the minimum interval between two traps which occur when the ARP table is filled.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.2 |
hpnicfArpTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.3 |
hpnicfArpTabLenThe length of the ARP table.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.3.1 |
hpnicfArpTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4 |
hpnicfArpTabFullTrapSend this trap when the ARP table is filled. The interval between two traps generated should be longer than hpnicfArpTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4.1 |
hpnicfArpPortDynamicEntryFullTrapSend this trap when the dynamic ARP number of the port exceeds the limitation. The object hpnicfArpTabLen describes the limitation of the max dynamic ARP number of this port. The interval between two traps should be longer than hpnicfArpTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4.2 |
hpnicfRtTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3 |
hpnicfDetailRtTrapTableThis table contains objects to decide what kind of trap should be sent. SEQUENCE OF HpnicfDetailRtTrapEntry .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1 |
hpnicfDetailRtTrapEntryEntry items HpnicfDetailRtTrapEntry .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1 |
hpnicfDetailRtProTypeThe index value which uniquely identifies an entry in the hpnicfDetailRtTrapTable.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1.1 |
hpnicfDetailRtEnableIndicates whether hpnicfDetailRtTabFullTrap traps should be generated when a specific routing table is filled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1.2 |
hpnicfRtTabTrapEnableIndicates whether hpnicfRtTabFullTrap traps should be generated when the routing table is filled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.2 |
hpnicfRtTabTrapIntervalDefinition of the minimum interval between two traps which occur when the routing table is filled.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.3 |
hpnicfRtTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4 |
hpnicfRtTabLenThe length of the routing table. The detail routing tables also use the same object.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.1 |
hpnicfDefaultRtNextHopTypeThe IP address type of the next hop of the default route. The value must be ipv4 or ipv6ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.2 |
hpnicfDefaultRtNextHopThe IP address of the next hop of the default route.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.3 |
hpnicfDefaultRtOutIfThe index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.4 |
hpnicfRtTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5 |
hpnicfRtTabFullTrapSend this trap when the routing table is filled. The interval between two traps generated should be longer than hpnicfRtTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.1 |
hpnicfDetailRtTabFullTrapSend this trap when the detail routing table is filled. The interval between two traps generated should be longer than hpnicfRtTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.2 |
hpnicfDefaultRtDelTrapSend this trap when the default route is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.3 |
hpnicfDefaultRtDelTrapEnableIndicates whether hpnicfDefaultRtDelTrap traps should be generated when the default route is deleted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.6 |
hpnicfMulticastTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.4 |
hpnicfMulticastTabTrapEnableIndicates whether hpnicfMulticastTabFullTrap traps should be generated when the multicast table is filled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.1 |
hpnicfMulticastTabTrapIntervalDefinition of the minimum interval between two traps which occur when the multicast table is filled.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.2 |
hpnicfMulticastTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3 |
hpnicfMulticastTabTypeDefining the type of the multicast table, layer2 or layer3.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3.1 |
hpnicfMulticastTabLenThe length of the multicast table.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3.2 |
hpnicfMulticastTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.4 |
hpnicfMulticastTabFullTrapSend this trap when the multicast table is filled. The interval between two traps generated should be longer than hpnicfMulticastTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.4.1 |
hpnicfNdTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.5 |
hpnicfNdTabTrapEnableIndicates whether hpnicfNdTabFullTrap traps should be generated when the ND table is filled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.1 |
hpnicfNdTabTrapIntervalDefinition of the minimum interval between two traps which occur when the ND table is filled.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.2 |
hpnicfNdTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.3 |
hpnicfNdTabLenThe length of the ND table.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.3.1 |
hpnicfNdTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.4 |
hpnicfNdTabFullTrapSend this trap when the ND table is filled. The interval between two traps generated should be longer than hpnicfNdTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.4.1 |
hpnicfPeriodicalTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6 |
hpnicfPeriodicalTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1 |
hpnicfPeriodicalTrapIntervalDefinition of the periodical interval. If no trap occurs during the certain interval, an hpnicfPeriodicalTrap will be generated. If the interval is set to 0, no hpnicfPeriodicalTrap will be generated.rw Integer32 (0|10..3600) UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.1 |
hpnicfPeriodicalTrapSwitchDefinition of the periodical switch. If the value is off,the hpnicfPeriodicalTrap will not be generated. the hpnicfPeriodicalTrapInterval will be set to 0.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.2 |
hpnicfPeriodicalTrapSwitch2Periodical heartbeat trap sending switch. If the value is off, the hpnicfPeriodicalTrap will not be generated, and the hpnicfPeriodicalTrapInterval will be set to 0. This node differs from hpnicfPeriodicalTrapSwitch in value.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.3 |
hpnicfPeriodicalTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.2 |
hpnicfPeriodicalNotification OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3 |
hpnicfPeriodicalNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3.0 |
hpnicfPeriodicalTrapIf no trap occurs during the interval spicified by hpnicfPeriodicalTrapInterval, an hpnicfPeriodicalTrap will be generated. If the interval is set to 0, no hpnicfPeriodicalTrap will be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3.0.1 |
hpnicfTrapDesInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.7 |
hpnicfTrapDesInfoTableA table of trap destination host address and port . SEQUENCE OF HpnicfTrapDesInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1 |
hpnicfTrapDesInfoEntryThe entry of trap destination host address and port. HpnicfTrapDesInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1 |
hpnicfTrapDesInfoIndexThe index of this table. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.1 |
hpnicfTrapDesIPAddressThe host IP address of the trap destination.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.2 |
hpnicfTrapDesPortThe port of the trap destination.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.3 |
hpnicfTrapDesRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.4 |
hpnicfTrapDesAddrTAddressThis object contains a transport address.rw TAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.5 |
hpnicfTrapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.38.1.8 |
hpnicfTrapConfigTableA table of trap configuration. SEQUENCE OF HpnicfTrapConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1 |
hpnicfTrapConfigEntryThe entry of trap configuration. HpnicfTrapConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1 |
hpnicfTrapConfigIndexThe index of this table. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.1 |
hpnicfTrapConfigNameThe name of the appointed traps.ro SnmpAdminString .1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.2 |
hpnicfTrapConfigDescrThe description of the appointed traps.rw SnmpAdminString .1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.3 |
hpnicfTrapConfigSwitchIndicates whether the specified traps should be generated.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.4 |
hpnicfTrapConfigSwitch2Indicates whether the specified traps should be generated. This node differs from hpnicfTrapConfigSwitch in value.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.5 |