HPN-ICF-SUBNET-VLAN-MIB
AI MIB Summary
The HPN-ICF-SUBNET-VLAN-MIB enables SNMP-based monitoring and configuration of subnet-to-VLAN mapping parameters on HP Networking Intelligent Control Framework (ICF) switches. It exposes specific objects for managing VLAN interfaces associated with defined IP subnets, including interface status, VLAN IDs, and subnet association states.
This MIB contains the objects for managing the subnet-based VLAN configurations.
Main OID:
hpnicfSubnetVlan.1.3.6.1.4.1.11.2.14.11.15.2.61
29
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
hpnicfSubnetVlanThis MIB contains the objects for managing the subnet-based VLAN configurations. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.61 |
hpnicfSubnetVlanObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.61.1 |
hpnicfSubnetVlanScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.61.1.1 |
hpnicfSubnetNumAllVlanThe maximum number of subnets that can be configured on all VLANs.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.1 |
hpnicfSubnetNumPerVlanThe maximum number of subnets that can be configured on each VLAN.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.2 |
hpnicfSubnetNumAllPortThe maximum number of subnets that can be applied to all ports.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.3 |
hpnicfSubnetNumPerPortThe maximum number of subnets that can be applied to each port.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.4 |
hpnicfSubnetVlanTableSubnet-based VLAN configuration table. SEQUENCE OF HpnicfSubnetVlanEntry .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2 |
hpnicfSubnetVlanEntrySubnet-based VLAN configuration entry. HpnicfSubnetVlanEntry .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1 |
hpnicfSubnetVlanVlanIdVlan id. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.1 |
hpnicfSubnetVlanSubnetIndexThe subnet index value of a row in this table is from zero to the value of hpnicfSubnetNumPerVlan subtracting one. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.2 |
hpnicfSubnetVlanVlanIpAddressTypeThere are two kinds of ip address supported by VLAN. One is IPv4, which is 32 bits. The other is IPv6, which is 128 bits.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.3 |
hpnicfSubnetVlanIpAddressValueThe ip address of the configured subnet on VLAN, which can be an IPv4 or IPv6.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.4 |
hpnicfSubnetVlanNetMaskValueThe net mask of the configured subnet on VLAN, which can be an IPv4 or IPv6.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.5 |
hpnicfSubnetVlanRowStatusThe row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.6 |
hpnicfSubnetVlanPortCreateTableSubnet-based VLAN port table. SEQUENCE OF HpnicfSubnetVlanPortCreateEntry .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3 |
hpnicfSubnetVlanPortCreateEntrySubnet-based VLAN port creation entry. HpnicfSubnetVlanPortCreateEntry .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1 |
hpnicfSubnetVlanPortCreateIndexThe port index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.1 |
hpnicfSubnetVlanPortCreateVlanIdThe subnet-based VLAN id. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.2 |
hpnicfSubnetVlanPortInfoVlanIdThis value is the same as the value of hpnicfSubnetVlanPortCreateVlanId index. All of the subnet information in this port, is described on vlan, whose VLAN id is the value of hpnicfSubnetVlanPortInfoVlanId. The VLAN id of vlan including subnet information can be obtained here. The subnet information can be obtained in the hpnicfSubnetVlanTable above.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.3 |
hpnicfSubnetVlanPortRowStatusThe row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.4 |
hpnicfSubnetVlanPortStatusThe subnet VLAN status on the port. The value is active only when hpnicfSubnetVlanPortCreateVlanId has the corresponding entry in hpnicfSubnetVlanTable, the port link type is hybrid, and the VLAN is allowed by the port. active: subnet VLAN has been applied on the port. inactive: subnet VLAN is not applied on the port.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.5 |
hpnicfSubnetVlanConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.61.2 |
hpnicfSubnetVlanCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.61.2.1 |
hpnicfSubnetVlanComplianceThe compliance statement for subnet VLAN MIB. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.61.2.1.1 |
hpnicfSubnetVlanGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.61.2.2 |
hpnicfSubnetVlanScalarObjectGroupA group of scalar objects describing the maximum number. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.1 |
hpnicfSubnetVlanSubnetGroupA group of subnet VLAN subnets. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.2 |
hpnicfSubnetVlanPortCreateGroupA group of subnet VLAN port creation table. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.3 |