HPN-ICF-DOT11-ACMT-MIB
AI MIB Summary
The HPN-ICF-DOT11-ACMT-MIB module monitors the CAPWAP tunnel state, control plane interactions, and association metrics between Aruba (HP) Wireless Access Controllers and Fit Access Points compliant with IEEE 802.11 standards. It provides visibility into BSS operations, radio interface status, and the specific entity relationships defined by the Entity MIB for enterprise wireless infrastructure management.
This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
Main OID:
hpnicfDot11ACMT.1.3.6.1.4.1.11.2.14.11.15.2.75.1
123
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
123 total| Object Name |
|---|
hpnicfDot11ACMTThis MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.75.1 |
hpnicfDot11ACObjectGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1 |
hpnicfDot11ACObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1 |
hpnicfDot11CurrentACMACModeRepresents which MAC mode defined in the CAPWAP draft is in use for the AC.ro HpnicfDot11MACModeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.1 |
hpnicfDot11MaxAPNumPermittedRepresents the maximum number of AP connection permitted for one AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.2 |
hpnicfDot11MaxStationNumPermittedRepresents the maximum number of station connection permitted for one AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.3 |
hpnicfDot11RunAPNumThresholdWhen the percentage of run AP number is larger than this threshold, a notification will be sent.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4 |
hpnicfDot11ACLoadInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2 |
hpnicfDot11APConnectCountRepresents the total number of APs which are connecting to AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.1 |
hpnicfDot11StationConnectCountRepresents the total number of stations which are accessing the WLAN service through AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.2 |
hpnicfDot11ACIFLoadInfoTableRepresents AP number information of interface. SEQUENCE OF HpnicfDot11ACIFLoadInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3 |
hpnicfDot11ACIFLoadInfoEntryEach entry represents AP number information of an interface HpnicfDot11ACIFLoadInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1 |
hpnicfDot11ACIfIndexRepresents index of AC interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.1 |
hpnicfDot11ACIfApNumRepresents AP number connected to the AC interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.2 |
hpnicfDot11ACIfStaNumRepresents Station number connected to the AC interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.3 |
hpnicfDot11ACIfNameRepresents InterfaceName AP number connected to AC interface.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.4 |
hpnicfDot11MasterAPCountRepresents the total number of AP which have established the master tunnel with AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.4 |
hpnicfDot11SlaveAPCountRepresents the total number of AP which have established the slave tunnel with AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.5 |
hpnicfDot11ConnectAutoAPCountRepresents the total number of auto APs that are connecting to AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.6 |
hpnicfDot11PersistentAPCountRepresents the total number of persistent AP.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.7 |
hpnicfDot11AcUploadFrameCntRepresents the number of frames that AP sends to AC through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.8 |
hpnicfDot11AcDownloadFrameCntRepresents the number of frames that AC sends to AP through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.9 |
hpnicfDot11AcUploadFrameBytesRepresents the bytes of frames that AP sends to AC through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.10 |
hpnicfDot11AcDownloadFrameBytesRepresents the bytes of frames that AC sends to AP through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.11 |
hpnicfDot11BackupACRoleThis object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.12 |
hpnicfDot11BackupACNMSIPThis object represents the manger IP address of the slave ac.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.13 |
hpnicfDot11ACBackupModeThis object represents the ac backup mode.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.14 |
hpnicfDot11ACBackupStatusThis object represents the ac backup status.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.15 |
hpnicfDot11ACSwitchCntThis object represents the ac switch times.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.16 |
hpnicfDot11ACSouthifPacketOutputCountRepresents the count of output packets with the down-link interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.17 |
hpnicfDot11ACSouthifPacketOutputBytesRepresents the bytes of output packets with the down-link interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.18 |
hpnicfDot11ACSouthifPacketInputCountRepresents the count of input packets with the down-link interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.19 |
hpnicfDot11ACSouthifPacketInputBytesRepresents the bytes of input packets with the down-link interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.20 |
hpnicfDot11TotalAPconnectedRepresents the total number of AP which are connected to AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.21 |
hpnicfDot11RemainingAPcapacityRepresents the remaining AP capacity of the AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.22 |
hpnicfDot11WLANAssocStatisInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3 |
hpnicfDot11StationAssocSumRepresents the total number of station association.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.1 |
hpnicfDot11StationAssocFailSumRepresents the total number of station association failure.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.2 |
hpnicfDot11StationReassocSumRepresents the total number of station reassociation.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.3 |
hpnicfDot11StationAssocRejectedSumRepresents the total number of station association rejected on account of resource limit.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.4 |
hpnicfDot11StationExDeAuthenSumRepresents the total number of exceptional station deauthentication (Without sending a deauthentication to AP).ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.5 |
hpnicfDot11StationCurAssocSumRepresents the total number of current associated stations.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.6 |
hpnicfDot11StationAssocReqSumRepresents the total number of station association request.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.7 |
hpnicfDot11StationReassocReqSumRepresents the total number of station reassociation request.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.8 |
hpnicfDot11StationReassocFailSumRepresents the total number of station reassociation failure.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.9 |
hpnicfDot11ACBASInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4 |
hpnicfDot11ACBASSysObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.1 |
hpnicfDot11ACBASTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2 |
hpnicfDot11ACBASIfTableRepresents the BAS information of interfaces. SEQUENCE OF HpnicfDot11ACBASIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3 |
hpnicfDot11ACBASIfEntryEach entry represents the BAS information of an interface HpnicfDot11ACBASIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1 |
hpnicfDot11ACBASIfIndexThe ifIndex of the BAS interface. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.1 |
hpnicfDot11ACBASIfDescrA textual string containing information about the BAS interface.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.2 |
hpnicfDot11ACBASIfTypeThe type of the BAS interface.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.3 |
hpnicfDot11ACStaUserSecAuthStatis OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5 |
hpnicfDot11ACStaUserAuthCurNumberRepresents the current number of user authenticated with this AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.1 |
hpnicfDot11ACStaUserConnFailCntRepresents the total number of user disconnected with this AC.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.2 |
hpnicfDot11ACStaUserAuthReqCntRepresents the total number of user authenticate request with this AC.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.3 |
hpnicfDot11ACStaUserAuthSuccCntRepresents the total number of users authenticated successful with this AC.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.4 |
hpnicfDot11ACStaUserAuthFailCntRepresents the total number of user authenticated failed with this AC.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.5 |
hpnicfDot11ACStaUserAllAuthCntCMRepresents the total number of users authenticated with this AC.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.6 |
hpnicfDot11ACStaSecAuthTypeStatis OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6 |
hpnicfDot11ACStaUserPortalOnlineNumRepresents the number of online portal users authenticated by RADIUS, including MAC-trigger and IMSIAuth users.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.1 |
hpnicfDot11ACStaUserFreeAuthOnlineNumNumbers of online user is no need authenticated.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.2 |
hpnicfDot11ACStaUserAssociateAuthOnlineNumRepresents the number of online users authenticated by associated authentication, excluding AutoAuth users.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.3 |
hpnicfDot11ACStaUserMacAuthOnlineNumThe numbers of online user which is launched authentication by MAC address and authenticated by Radius.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.4 |
hpnicfDot11ACStaUserPortalLostConnectionCntFor PortalAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.5 |
hpnicfDot11ACStaUserFreeAuthLostConnectionCntFor FreeAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.6 |
hpnicfDot11ACStaUserAssociateAuthLostConnectionCntFor AssociateAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.7 |
hpnicfDot11ACStaUserMacAuthLostConnectionCntFor MacAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.8 |
hpnicfDot11ACStaPortalAuthReqCntRepresents PortalAuth request count after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.9 |
hpnicfDot11ACStaAssociateAuthReqCntRepresents AssociateAuth request count after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.10 |
hpnicfDot11ACStaMacAuthReqCntRepresents MacAuth request count after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.11 |
hpnicfDot11ACStaPortalAuthSuccCntRepresents count of PortalAuth authenticated successfully after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.12 |
hpnicfDot11ACStaAssociateAuthSuccCntRepresents count of AssociateAuth authenticated successfully after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.13 |
hpnicfDot11ACStaMacAuthSuccCntRepresents count of MacAuth authenticated successfully after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.14 |
hpnicfDot11ACStaPortalAuthReqFailCntRepresents count of PortalAuth failure in request after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.15 |
hpnicfDot11ACStaAssociateAuthReqFailCntRepresents count of AssociateAuth failure in request after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.16 |
hpnicfDot11ACStaMacAuthReqFailCntRepresents count of MacAuth failure in request after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.17 |
hpnicfDot11ACStaUserAutoAuthOnlineNumCMRepresents the number of online users authenticated by auto authentication.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.18 |
hpnicfDot11ACStaUserAutoAuthLostConnectionCntCMRepresents the disconnection count of AutoAuth users, excluding the ones who disconnect AP by themselves.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.19 |
hpnicfDot11ACStaAutoAuthReqCntCMRepresents the count of AutoAuth requests after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.20 |
hpnicfDot11ACStaAutoAuthSuccCntCMRepresents the count of successful AutoAuth authentications after AP up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.21 |
hpnicfDot11ACStaAutoAuthReqFailCntCMRepresents the count of failed AutoAuth requests after AP is up.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.22 |
hpnicfDot11ACPortalStatisticCMTableThe table describes portal statistics information. SEQUENCE OF HpnicfDot11ACPortalStatisticCMEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7 |
hpnicfDot11ACPortalStatisticCMEntryEach entry contains the portal statistics information of an SSID. HpnicfDot11ACPortalStatisticCMEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1 |
hpnicfDot11ACPortalStatisticSSIDCMRepresents the service policy name. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.1 |
hpnicfDot11ACPortalStatAuthReqCMRepresents the total number of portal authentication requests from portal server to AC.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.2 |
hpnicfDot11ACPortalStatAuthRespCMRepresents the total number of portal authentication responses from AC to portal server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.3 |
hpnicfDot11CAPWAPTunnelGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2 |
hpnicfDot11CAPWAPTunnelTableThe table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol. SEQUENCE OF HpnicfDot11CAPWAPTunnelEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1 |
hpnicfDot11CAPWAPTunnelEntryEach entry contains information of data tunnel and control tunnel of AP which is connecting to AC. HpnicfDot11CAPWAPTunnelEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1 |
hpnicfDot11CurrTunnelAPIDTo uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC.ro HpnicfDot11ObjectIDType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.1 |
hpnicfDot11CtrlTunnelCurrSecRepresents what security scheme is in use for control tunnel.ro HpnicfDot11TunnelSecSchemType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.2 |
hpnicfDot11CtrlTunnelUpTimeRepresents how long for control tunnel up. If the value is zero, then tunnel is not set up.ro Integer32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.3 |
hpnicfDot11DataTunnelCurrSecRepresents what security scheme is in use for data tunnel.ro HpnicfDot11TunnelSecSchemType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.4 |
hpnicfDot11DataTunnelUpTimeRepresents how long for data tunnel up. If the value is zero, then tunnel is not set up.ro Integer32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.5 |
hpnicfDot11CtrlTunnelUpTimeTicksRepresents how long control tunnel is up. If the value is zero, then tunnel is not set up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.6 |
hpnicfDot11ACMtNotifyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3 |
hpnicfDot11ACMtTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0 |
hpnicfDot11ACMtTunnelSetupTrapThis notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.1 |
hpnicfDot11ACMtTunnelDownTrapThis notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.2 |
hpnicfDot11ACMtBackupSwtTrapThis trap is sent by AC when AC switches from master to slave or from slave to master. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.3 |
hpnicfDot11ACLoadBalanceTrapThis trap is sent by AC when load-balance is enabled on AC. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.4 |
hpnicfDot11ACStaFullTrapThis notification will be sent when STA is full on AC. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.5 |
hpnicfDot11ACStatusSwitchTrapThis notification will be sent when AC switches from standby to active or from standby to active. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.6 |
hpnicfDot11RunAPNumOverloadThe notification will be sent by AC when run AP number exceeds the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.7 |
hpnicfDot11RunAPNumOverloadRecoverThe notification will be sent by AC when run AP number recover normal from overload state. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.8 |
hpnicfDot11ACMtTrapVarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1 |
hpnicfDot11ACMtTrapTunlDwnInfoRepresents the reason for tunnel down. The following values are supported: tunnelTimeout - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure - rekey process is failed, tunnel will be broken. apReset - Administrator reset AP. apCrash - AP reboot for system crash. apDeleted - Delete AP from AC and trigger tunnel down. apCfgChange - The configuration for AP was changed.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.1 |
hpnicfDot11ACMtTrapTunlUpInfoRepresents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.2 |
hpnicfDot11ACMtTrapBackupSwitchInfoRepresents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.3 |
hpnicfDot11ACMtTrapTnlAPNameRepresents name of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.4 |
hpnicfDot11ACMtTrapTnlAPIPAddrRepresents IP address of the AP which sets up the tunnel with the AC.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.5 |
hpnicfDot11LoadBalanceTypeRepresents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.6 |
hpnicfDot11LoadBalanceThresholdRepresents the value of load balance threshold.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.7 |
hpnicfDot11ACMtTrapAPIPv6AddrRepresents IPv6 address of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.8 |
hpnicfDot11ACMtTrapTunlDwnCountRepresents how many times that the tunnel between AC and AP has down.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.9 |
hpnicfDot11ACMaxStaNumRepresents the max number of STA on AC.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.10 |
hpnicfDot11ACMtTrapTnlAPSysNameRepresents system name of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.11 |
hpnicfDot11ACMtFirstTrapTimeRepresents the first trap time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.12 |
hpnicfDot11ACStatusSwitchInfoRepresents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.13 |
hpnicfDot11SourceACNmsIPRepresents the NMS IP address of master AC.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.14 |
hpnicfDot11ACMtTrapAPMacAddressRepresents the MAC address of an AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.15 |