HPN-ICF-DOMAIN-MIB
AI MIB Summary
The HPN-ICF-DOMAIN-MIB enables management of domain configuration and state parameters on Hewlett Packard Enterprise Intelligent Call Flow (ICF) appliances, specifically monitoring domain registration status, active session counts, and policy enforcement states.
The MIB module is used for managing domain.
Main OID:
hpnicfDomain.1.3.6.1.4.1.11.2.14.11.15.2.46
39
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
39 total| Object Name |
|---|
hpnicfDomainThe MIB module is used for managing domain. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.46 |
hpnicfDomainControl OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.46.1 |
hpnicfDomainDefaultSpecifies default domain on the equipment. Default value is 'system'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.46.1.1 |
hpnicfDomainTables OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.46.2 |
hpnicfDomainInfoTableThe (conceptual) table listing the domains. SEQUENCE OF HpnicfDomainInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1 |
hpnicfDomainInfoEntryAn entry (conceptual row) representing a domain. HpnicfDomainInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1 |
hpnicfDomainNameAn index uniquely identifies a domain. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.1 |
hpnicfDomainStateThe state of the domain, which reflects whether the domain is active. Default value is active.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.2 |
hpnicfDomainMaxAccessNumThe maximum number which the domain allows to access. If the value is set to 0, the access limit will be disabled.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.3 |
hpnicfDomainVlanAssignModeThe vlan assignment mode. The mode SHOULD be the same as the mode of corresponding server. 1 (integer) - Integer Vlan assignment mode. 2 (string) - String Vlan assignment mode. 3 (vlanlist) - VLAN-List Vlan assignment mode. The default value is integer.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.4 |
hpnicfDomainIdleCutEnableThe idle cut control. Setting this attribute to true, the connection will be cut when the flow is less than hpnicfDomainIdleCutMinFlow and lasts hpnicfDomainIdleCutMaxTime. Default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.5 |
hpnicfDomainIdleCutMaxTimeThe maximal time of idle-cut. The unit is minute. If the value of hpnicfDomainIdleCutEnable is false, the value of hpnicfDomainIdleCutMaxTime is meaningless.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.6 |
hpnicfDomainIdleCutMinFlowThe minimal flow of idle-cut. The unit is byte. If the value of hpnicfDomainIdleCutEnable is false, the value of hpnicfDomainIdleCutMinFlow is meaningless.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.7 |
hpnicfDomainMessengerEnableThe messenger service control. If set hpnicfDomainMessengerEnable to true, hpnicfDomainMessengerLimitTime and hpnicfDomainMessengerSpanTime must be set to valid values. Default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.8 |
hpnicfDomainMessengerLimitTimeThe messenger service limit time. The unit is minute. If the value of hpnicfDomainMessengerEnable is false, the value of hpnicfDomainMessengerLimitTime is meaningless.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.9 |
hpnicfDomainMessengerSpanTimeThe messenger service span time. The unit is minute. It must be a multiple of 5. If the value of hpnicfDomainMessengerEnable is false, the value of hpnicfDomainMessengerSpanTime is meaningless.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.10 |
hpnicfDomainSelfServiceEnableThe self service control. If set hpnicfDomainSelfServiceEnable to true, hpnicfDomainSelfServiceURL must be set to a valid value. Default value is FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.11 |
hpnicfDomainSelfServiceURLSelf-service URL(Uniform Resource Locator) of the domain.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.12 |
hpnicfDomainAccFailureActionDefines the action that authentication should be taken if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore accounting start failure. 2 (reject) - treat as authentication failed if corresponding accounting start fails. Default value is reject.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.13 |
hpnicfDomainRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To destroy an existent row, the domain of the row MUST NOT be used by user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.14 |
hpnicfDomainCurrentAccessNumThe current access number of the domain.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.15 |
hpnicfDomainIdleCutTimeAuthentication aging time. If no packet is transmitted during the aging time, the authentication is aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.16 |
hpnicfDomainSchemeTableThe (conceptual) table listing schemes of all domains. SEQUENCE OF HpnicfDomainSchemeEntry .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2 |
hpnicfDomainSchemeEntryAn entry (conceptual row) representing an IP pool of a domain HpnicfDomainSchemeEntry .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1 |
hpnicfDomainSchemeIndexThe scheme index of domain, which is an identifier of a domain scheme. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.1 |
hpnicfDomainSchemeModeThe scheme mode of the domain. Setting hpnicfDomainSchemeMode to none(1) indicates the domain has none scheme. Setting hpnicfDomainSchemeMode to local(2) indicates the domain will use local-server as a scheme. Setting hpnicfDomainSchemeMode to radius(3), tacacs(4) or ldap(5) indicates the domain will use radius, tacacs or ldap scheme. If set hpnicfDomainSchemeMode to radius(3), tacacs(4) or ldap(5), hpnicfDomainAuthSchemeName and hpnicfDomainAcctSchemeName must be set to valid values. And if hpnicfDomainSchemeMode is set to none(1) or local(2), the value of hpnicfDomainAuthSchemeName and hpnicfDomainAcctSchemeName will be ignored.rw HpnicfModeOfDomainScheme .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.2 |
hpnicfDomainAuthSchemeNameThe authentication scheme name of domain. If hpnicfDomainSchemeMode is set to radius, tacacs or ldap, the hpnicfDomainAuthSchemeName must be configured with a valid value.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.3 |
hpnicfDomainAcctSchemeNameThe accounting scheme name of the domain. If hpnicfDomainSchemeMode is set to radius or tacacs, the hpnicfDomainAcctSchemeName must be configured with a valid value.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.4 |
hpnicfDomainSchemeRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which supports active status and createAndGo, destroy operation. To create a new row, hpnicfDomainSchemeMode must be specified. To destroy an existent row, the scheme of the row MUST NOT be used by user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.5 |
hpnicfDomainSchemeAAATypeService Type of the server.rw HpnicfAAATypeDomainScheme .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.6 |
hpnicfDomainSchemeAAANameThe scheme name of the domain, whether the scheme represents accounting, authentication or authorization references the object hpnicfDomainSchemeAAAType. The value of the object must be valid if the value of hpnicfDomainSchemeMode is radius or tacacs, the value of the object will be ignored if the value of hpnicfDomainSchemeMode is none or local. If the domain has no scheme, there will be a null string. If this object is supported, the objects hpnicfDomainAuthSchemeName and hpnicfDomainAcctSchemeName will be ignored.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.7 |
hpnicfDomainSchemeAccessModeThe access mode of the domain scheme.rw HpnicfAccessModeofDomainScheme .1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.8 |
hpnicfDomainIpPoolTableThe (conceptual) table listing IP pools of all domains. SEQUENCE OF HpnicfDomainIpPoolEntry .1.3.6.1.4.1.11.2.14.11.15.2.46.2.3 |
hpnicfDomainIpPoolEntryAn entry (conceptual row) representing an IP pool of a domain. HpnicfDomainIpPoolEntry .1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1 |
hpnicfDomainIpPoolNumThe number of IP pool, which is an identifier of an IP pool. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.1 |
hpnicfDomainIpPoolLowIpAddrTypeThe low IP addresses type (IPv4 or IPv6) of IP pool.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.2 |
hpnicfDomainIpPoolLowIpAddrThe low IP address of IP pool.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.3 |
hpnicfDomainIpPoolLenThe length of IP pool. Default value is 1.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.4 |
hpnicfDomainIpPoolRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To create a new row, hpnicfDomainIpPoolNum and hpnicfDomainIpPoolLowIpAddr must be specified. To destroy an existent row, the IP pool of this row MUST NOT be used by user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.5 |