HPN-ICF-DHCPRELAY-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HPN-ICF-DHCPRELAY-MIB.
DHCPR MIB
Main OID:
hpnicfDhcpRelay.1.3.6.1.4.1.11.2.14.11.15.2.58
51
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
hpnicfDhcpRelayDHCPR MIB MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.58 |
hpnicfDHCPRMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.58.1 |
hpnicfDHCPRIfSelectTableA table for configuring relay mode
for interfaces. SEQUENCE OF HpnicfDHCPRIfSelectEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.1 |
hpnicfDHCPRIfSelectEntryAn entry for configuring relay mode for an
interface. HpnicfDHCPRIfSelectEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1 |
hpnicfDHCPRIfSelectRelayModeIf the value is on, the DHCP relay function
would be enabled on this interface.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1.1 |
hpnicfDHCPRIpToGroupTableA table for configuring ip addresses for DHCP
server groups. SEQUENCE OF HpnicfDHCPRIpToGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.2 |
hpnicfDHCPRIpToGroupEntryAn entry for configuring ip addresses for a DHCP
server group. HpnicfDHCPRIpToGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1 |
hpnicfDHCPRIpToGroupGroupIdGroup identifier of DHCP server group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.1 |
hpnicfDHCPRIpToGroupServerIpTypeIp address type of DHCP server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.2 |
hpnicfDHCPRIpToGroupServerIpIp address of DHCP server. InetAddress .1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.3 |
hpnicfDHCPRIpToGroupRowStatusOperation status of this table entry.
Three actions are used: active,
createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.4 |
hpnicfDHCPRIfToGroupTableA table for configuring DHCP server groups
for interfaces. SEQUENCE OF HpnicfDHCPRIfToGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.3 |
hpnicfDHCPRIfToGroupEntryAn entry for configuring DHCP server group for
an interface. HpnicfDHCPRIfToGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1 |
hpnicfDHCPRIfToGroupGroupIdThe DHCP server group for this interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.1 |
hpnicfDHCPRIfToGroupRowStatusOperation status of this table entry.
Three actions are used: active,
createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.2 |
hpnicfDHCPRAddrCheckTableA table containing the states of dhcp security address
check switchs for interfaces. SEQUENCE OF HpnicfDHCPRAddrCheckEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.4 |
hpnicfDHCPRAddrCheckEntryAn entry containing the state of dhcp security address
check switch for an interface. HpnicfDHCPRAddrCheckEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1 |
hpnicfDHCPRAddrCheckSwitchThe state of dhcp security address check switch for
this interface.
It has two defined values: enabled and disabled.
If the value is enabled, the address check function
would be enabled. The default value is disabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1.1 |
hpnicfDHCPRSecurityTableA table containing the information of
DHCP security. SEQUENCE OF HpnicfDHCPRSecurityEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.5 |
hpnicfDHCPRSecurityEntryAn entry containing the information of
DHCP security. HpnicfDHCPRSecurityEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1 |
hpnicfDHCPRSecurityClientIpAddrTypeDHCP client's net ip address type InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.1 |
hpnicfDHCPRSecurityClientIpAddrDHCP client's net ip address InetAddress .1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.2 |
hpnicfDHCPRSecurityClientMacAddrDHCP client's mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.3 |
hpnicfDHCPRSecurityClientPropertyProperty of client addressrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.4 |
hpnicfDHCPRSecurityClientRowStatusOperation status of this table entry.
Three actions are used: active,
createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.5 |
hpnicfDHCPRStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6 |
hpnicfDHCPRRxClientPktNumThe total number of the packets received from DHCP
clients by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.1 |
hpnicfDHCPRTxClientPktNumThe total number of the brodcast packets transmitted
to DHCP clients by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.2 |
hpnicfDHCPRRxServerPktNumThe total number of the packets received from
DHCP Servers by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.3 |
hpnicfDHCPRTxServerPktNumThe total number of the packets transmitted to
DHCP Servers by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.4 |
hpnicfDHCPRDiscoverPktNumThe total number of the DHCP Discover packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.5 |
hpnicfDHCPRRequestPktNumThe total number of the DHCP Request packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.6 |
hpnicfDHCPRDeclinePktNumThe total number of the DHCP Decline packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.7 |
hpnicfDHCPRReleasePktNumThe total number of the DHCP Release packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.8 |
hpnicfDHCPRInformPktNumThe total number of the DHCP Inform packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.9 |
hpnicfDHCPROfferPktNumThe total number of the DHCP Offer packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.10 |
hpnicfDHCPRAckPktNumThe total number of the DHCP Ack packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.11 |
hpnicfDHCPRNakPktNumThe total number of the DHCP Nak packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.12 |
hpnicfDHCPRStatisticsResetThis node only supports set operation.
If the value is true,it will clear all of the packet
statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.13 |
hpnicfDHCPRCycleGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.58.1.7 |
hpnicfDHCPRCycleStatusIf the value is on, the cycle function
would be enabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.7.1 |
hpnicfDHCPRConfigOption82Group OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8 |
hpnicfDHCPROption82SwitchIf the value is enabled,
DHCP relay supporting option 82 function
would be enabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.1 |
hpnicfDHCPROption82HandleStrategyThe strategies of DHCP relay handling option 82.
'drop' indicates DHCP relay discarding the request
packet including option 82.
'keep' indicates DHCP relay accepting the request
packet without any change of the option 82.
'replace' indicates DHCP relay accepting the
request packet on condition that it generates a new
option 82 to replace the original one.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.2 |
hpnicfDHCPRConfigOption82IfTableA table containing the information of DHCP
option 82.
This table depends on hpnicfDHCPRIfToGroupTable.
An entry of this table will be created when
an entry of hpnicfDHCPRIfToGroupTable is created. SEQUENCE OF HpnicfDHCPRConfigOption82IfEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3 |
hpnicfDHCPRConfigOption82IfEntryAn entry containing the information of
DHCP option 82. HpnicfDHCPRConfigOption82IfEntry .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1 |
hpnicfDHCPROption82IfSwitchIf DHCP relay supports option 82 functions, the
value is 'enabled'.
If DHCP relay does not support option 82 functions,
the value is 'disabled'.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.1 |
hpnicfDHCPROption82IfStrategyThe strategies of DHCP relay handling option 82.
'drop' indicates DHCP relay discarding the request
packet including option 82.
'keep' indicates DHCP relay accepting the request
packet without any change of the option 82.
'replace' indicates DHCP relay accepting the
request packet on condition that it generates a new
option 82 to replace the original one.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.2 |
hpnicfDHCPROption82IfFormatThe format of DHCP relay option 82.
'normal' is the standard format.
'verbose' is the detailed format.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.3 |
hpnicfDHCPROption82IfNodeTypeProperty of DHCP relay option 82 verbose format.
The value can be set by user only when the value
of hpnicfDHCPROption82IfFormat is set with 'verbose'.
If the value of hpnicfDHCPROption82IfFormat is
'normal', the value is automatically set with
'invalid'. the value can not be set with 'invalid'
by user.
'mac' indicates the option 82 verbose format is
filled in with the mac of DHCP relay input
interface. If the value of hpnicfDHCPROption82IfFormat
is set with 'verbose', the value is automatically
set with 'mac'.
'sysname' indicates the option 82 verbose format
is filled in with the name of the DHCP relay.
'userdefine' indicates the option 82 verbose format
is filled in with the string defined by user.
If the value is set with 'userdefine', the value of
hpnicfDHCPROption82IfUsrDefString must be set
simultaneously.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.4 |
hpnicfDHCPROption82IfUsrDefStringThe string defined by user to fill in the
option 82 verbose format. If the value of
hpnicfDHCPROption82IfFormat is 'normal', or the
value of hpnicfDHCPROption82IfNodeType is 'mac'
or 'sysname', it is set with a null string
automatically and can not be modified by user.
It must be set with a non-zero length string
when the value of hpnicfDHCPROption82IfNodeType
is set with 'userdefine'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.5 |