HPN-ICF-ATM-DXI-MIB
AI MIB Summary
The HPN-ICF-ATM-DXI-MIB module enables configuration management of ATM Digital Cross-Connect Interface (DXI) parameters on HP Network Controller hardware. It provides SNMP-accessible objects for defining and monitoring ATM-DXI interface settings, including physical layer attributes and protocol state variables specific to the DXI standard.
This MIB contains objects to manage configuration of ATM-DXI. There are no constraints on this MIB.
Main OID:
hpnicfAtmDxi.1.3.6.1.4.1.11.2.14.11.15.2.49
25
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
hpnicfAtmDxiThis MIB contains objects to manage configuration of ATM-DXI.
There are no constraints on this MIB. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.49 |
hpnicfAtmDxiScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.49.1 |
hpnicfAtmDxiConfModeThis node identifies the ATM-DXI mode being
used at the ATM-DXI port.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.49.1.1 |
hpnicfAtmDxiIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.49.2 |
hpnicfAtmDxiPvcTableThis table describes information of PVC in ATM-DXI interface. SEQUENCE OF HpnicfAtmDxiPvcEntry .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1 |
hpnicfAtmDxiPvcEntryThe entry of hpnicfAtmDxiPvcTable. HpnicfAtmDxiPvcEntry .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1 |
hpnicfAtmDxiPvcVpiThe value of VPI. It can't be 0 if hpnicfAtmDxiPvcVci is 0. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.1 |
hpnicfAtmDxiPvcVciThe value of VCI. It can't be 0 if hpnicfAtmDxiPvcVpi is 0. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.2 |
hpnicfAtmDxiPvcDFAThe index of PVC. It is equal with vci and VPI. And this node value
is correlate with hpnicfAtmDxiPvcVpi and hpnicfAtmDxiPvcVci.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.3 |
hpnicfAtmDxiPvcEncTypeEncapsulation type of the frame.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.4 |
hpnicfAtmDxiPvcMapCountThe number of map. One map can only associate with one PVC, but
one PVC can associate with 32 maps. This node is the map count
which one PVC associated with.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.5 |
hpnicfAtmDxiPvcRowStatusOnly support 'destroy' 'createAndGo' and 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.6 |
hpnicfAtmDxiMapTableThis table describes PVC map information. SEQUENCE OF HpnicfAtmDxiMapEntry .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2 |
hpnicfAtmDxiMapEntryThe entry of hpnicfAtmDxiMapTable. HpnicfAtmDxiMapEntry .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1 |
hpnicfAtmDxiMapPeerIpTypeThe type of ip address: IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.1 |
hpnicfAtmDxiMapPeerIpThe peer ip address. This ip address is the peer ip
address which the frame will arrive. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.2 |
hpnicfAtmDxiMapPvcVpiThe VPI of PVC. It can't be 0 if hpnicfAtmDxiMapPvcVci is 0. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.3 |
hpnicfAtmDxiMapPvcVciThe VCI of PVC. It can't be 0 if hpnicfAtmDxiMapPvcVpi is 0. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.4 |
hpnicfAtmDxiMapTypePvc map type. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.5 |
hpnicfAtmDxiMapInarpTimeThe interval time of inarp request. This node describes
the interval time inarp request frame sent. If the hpnicfAtmDxiMapType
isn't inarp, this value is 0. Its unit is minute.rw Integer32 (0 | 5..10) .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.6 |
hpnicfAtmDxiMapBroEnableWhether ATM-DXI map enable broadcast or not.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.7 |
hpnicfAtmDxiMapRowStatusOnly support 'destroy', 'createAndGo' and 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.8 |
hpnicfAtmDxiConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.49.3 |
hpnicfAtmDxiCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.49.3.1 |
hpnicfAtmDxiGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.49.3.2 |