HPN-ICF-ACL-MIB
AI MIB Summary
The HPN-ICF-ACL-MIB enables SNMP-based configuration and monitoring of Access Control List (ACL) entries and packet filtering rules on HP ProCurve and HP Networking (HPN) switches. It exposes specific metrics for ACL rule definitions, hit counts, and packet drop statistics to facilitate real-time traffic policy enforcement and security auditing.
ACL management information base for managing devices that support access control list and packet filtering.
Main OID:
hpnicfAcl.1.3.6.1.4.1.11.2.14.11.15.2.8
530
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
530 total| Object Name |
|---|
hpnicfAclACL management information base for managing devices that support access control list and packet filtering. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.8 |
hpnicfAclMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.1 |
hpnicfAclModeAccess-list mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.1 |
hpnicfAclNumGroupTableConfigure the match-order of number-acl group. SEQUENCE OF HpnicfAclNumGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.2 |
hpnicfAclNumGroupEntryDefine the index of hpnicfAclNumGroupTable. HpnicfAclNumGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1 |
hpnicfAclNumGroupAclNumThe index of number-acl group Interface type:1000..1999 Basic type:2000..2999 Advance type:3000..3999 Link type:4000..4999 User type:5000..5999 Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.1 |
hpnicfAclNumGroupMatchOrderThe match-order of number-acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.2 |
hpnicfAclNumGroupSubitemNumThe number of number-acl group's node.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.3 |
hpnicfAclNumGroupDescriptionThe description of this acl group.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.4 |
hpnicfAclNumGroupCountClearReset the value of rules' counter, which belong to this group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.5 |
hpnicfAclNumGroupRowStatusRowStatus, now support three state: CreateAndGo, Active, Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.6 |
hpnicfAclNameGroupTableCreate acl-group that identified by name. SEQUENCE OF HpnicfAclNameGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.3 |
hpnicfAclNameGroupEntryDefine the index of hpnicfAclNameGroupTable. HpnicfAclNameGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1 |
hpnicfAclNameGroupIndexThe index of name-acl group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.1 |
hpnicfAclNameGroupCreateNameThe name of name-acl group.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.2 |
hpnicfAclNameGroupTypesThe type of name-acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.3 |
hpnicfAclNameGroupMatchOrderThe match-order of name-acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.4 |
hpnicfAclNameGroupSubitemNumThe number of name-acl group's node.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.5 |
hpnicfAclNameGroupRowStatusRowStatus, now support three state: CreateAndGo, Active, Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.6 |
hpnicfAclBasicRuleTableConfigure the rule for basic acl group. SEQUENCE OF HpnicfAclBasicRuleEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4 |
hpnicfAclBasicRuleEntryDefine the index of hpnicfAclBasicRuleTable. HpnicfAclBasicRuleEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1 |
hpnicfAclBasicAclNumThe index of basic acl group. Integer32 (0|2000..2999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.1 |
hpnicfAclBasicSubitemThe subindex of basic acl group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.2 |
hpnicfAclBasicActThe action of basic acl rule.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.3 |
hpnicfAclBasicSrcIpSource IP-address of basic acl rule.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.4 |
hpnicfAclBasicSrcWildSource IP-address wild of basic acl rule.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.5 |
hpnicfAclBasicTimeRangeNameThe Time-range of basic acl rule.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.6 |
hpnicfAclBasicFragmentsThe flag of matching fragmented packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.7 |
hpnicfAclBasicLogThe flag of log.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.8 |
hpnicfAclBasicEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.9 |
hpnicfAclBasicCountThe count of matched by basic rule.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.10 |
hpnicfAclBasicCountClearReset the value of counter.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.11 |
hpnicfAclBasicRowStatusRowStatus, now support three state: CreateAndGo, Active, Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.12 |
hpnicfAclAdvancedRuleTableConfigure the rule for advanced acl group. SEQUENCE OF HpnicfAclAdvancedRuleEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5 |
hpnicfAclAdvancedRuleEntryDefine the index of hpnicfAclAdvancedRuleTable. HpnicfAclAdvancedRuleEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1 |
hpnicfAclAdvancedAclNumThe index of advanced acl group. Integer32 (0|3000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.1 |
hpnicfAclAdvancedSubitemThe subindex of advanced acl group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.2 |
hpnicfAclAdvancedActThe action of Advance acl rule.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.3 |
hpnicfAclAdvancedProtocolThe protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol(2) ip Any IP protocol ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17)rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.4 |
hpnicfAclAdvancedSrcIpSource IP-address of advanced acl group.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.5 |
hpnicfAclAdvancedSrcWildSource IP-address wild of advanced acl group.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.6 |
hpnicfAclAdvancedSrcOpThe source IP-address's operator of advanced acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.7 |
hpnicfAclAdvancedSrcPort1The fourth layer source port1.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.8 |
hpnicfAclAdvancedSrcPort2The fourth layer source port2.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.9 |
hpnicfAclAdvancedDestIpDestination IP-address of advanced acl group.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.10 |
hpnicfAclAdvancedDestWildDestination IP-address wild of advanced acl group.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.11 |
hpnicfAclAdvancedDestOpThe destination IP-address's operator of advanced acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.12 |
hpnicfAclAdvancedDestPort1The fourth layer destination port1.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.13 |
hpnicfAclAdvancedDestPort2The fourth layer destination port2.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.14 |
hpnicfAclAdvancedPrecedenceThe value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7)rw Integer32 (0..7|255) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.15 |
hpnicfAclAdvancedTosThe value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max throughput TOS(4) min-delay Match packets with min delay TOS(8) min-monetary-cost Match packets with min monetary cost TOS(1) normal Match packets with normal TOS(0)rw Integer32 (0..15|255) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.16 |
hpnicfAclAdvancedDscpThe value of DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)rw Integer32 (0..63|255) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.17 |
hpnicfAclAdvancedEstablishEstablish flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.18 |
hpnicfAclAdvancedTimeRangeNameThe Time-range of advanced acl rule.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.19 |
hpnicfAclAdvancedIcmpTypeThe type of ICMP packet. Integer32 ICMP type echo Type=8, Code=0 echo-reply Type=0, Code=0 fragmentneed-DFset Type=3, Code=4 host-redirect Type=5, Code=1 host-tos-redirect Type=5, Code=3 host-unreachable Type=3, Code=1 information-reply Type=16, Code=0 information-request Type=15, Code=0 net-redirect Type=5, Code=0 net-tos-redirect Type=5, Code=2 net-unreachable Type=3, Code=0 parameter-problem Type=12, Code=0 port-unreachable Type=3, Code=3 protocol-unreachable Type=3, Code=2 reassembly-timeout Type=11, Code=1 source-quench Type=4, Code=0 source-route-failed Type=3, Code=5 timestamp-reply Type=14, Code=0 timestamp-request Type=13, Code=0 ttl-exceeded Type=11, Code=0rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.20 |
hpnicfAclAdvancedIcmpCodeThe code of ICMP packet.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.21 |
hpnicfAclAdvancedFragmentsThe flag of matching fragmented packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.22 |
hpnicfAclAdvancedLogThe flag of log.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.23 |
hpnicfAclAdvancedEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.24 |
hpnicfAclAdvancedCountThe count of matched by advanced rule.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.25 |
hpnicfAclAdvancedCountClearReset the value of counter.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.26 |
hpnicfAclAdvancedRowStatusRowStatus, now support three state: CreateAndGo, Active, Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.27 |
hpnicfAclIfRuleTableConfigure the rule for interface-based acl group. SEQUENCE OF HpnicfAclIfRuleEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6 |
hpnicfAclIfRuleEntryDefine the index of hpnicfAclIfRuleTable. HpnicfAclIfRuleEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1 |
hpnicfAclIfAclNumThe index of interface-based acl group. Integer32 (0|1000..1999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.1 |
hpnicfAclIfSubitemThe subindex of interface-based acl group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.2 |
hpnicfAclIfActThe action of interface-based acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.3 |
hpnicfAclIfIndexThe index of interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.4 |
hpnicfAclIfAnyThe flag of matching any interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.5 |
hpnicfAclIfTimeRangeNameThe Time-range of interface-based acl rule.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.6 |
hpnicfAclIfLogThe flag of log.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.7 |
hpnicfAclIfEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.8 |
hpnicfAclIfCountThe count of matched by basic rule.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.9 |
hpnicfAclIfCountClearReset the value of the rule's counter.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.10 |
hpnicfAclIfRowStatusRowStatus, now support three state: CreateAndGo, Active, Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.11 |
hpnicfAclLinkTableCreate link acl. SEQUENCE OF HpnicfAclLinkEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7 |
hpnicfAclLinkEntryThe entry of the link acl table. HpnicfAclLinkEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1 |
hpnicfAclLinkAclNumThe index of link-based acl group. Integer32 (0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.1 |
hpnicfAclLinkSubitemThe subindex of link-based acl group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.2 |
hpnicfAclLinkActThe action of link-based acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.3 |
hpnicfAclLinkProtocolThe layer 2 protocol-type of link acl rule.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.4 |
hpnicfAclLinkFormatTypeFormat type of link acl rule.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.5 |
hpnicfAclLinkVlanTagThe flag of vlan tag of link acl rule.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.6 |
hpnicfAclLinkVlanPriVlan priority of link acl rule.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.7 |
hpnicfAclLinkSrcVlanIdSource vlan ID of link acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.8 |
hpnicfAclLinkSrcMacSource mac of link acl rule.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.9 |
hpnicfAclLinkSrcMacWildSource mac wildzard of link acl rule.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.10 |
hpnicfAclLinkSrcIfIndexSource IfIndex of link acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.11 |
hpnicfAclLinkSrcAnyThe flag of matching any source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.12 |
hpnicfAclLinkDestVlanIdDestination vlan ID of link acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.13 |
hpnicfAclLinkDestMacDestination mac of link acl rule.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.14 |
hpnicfAclLinkDestMacWildDestination mac wildzard of link acl rule.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.15 |
hpnicfAclLinkDestIfIndexDestination IfIndex of link acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.16 |
hpnicfAclLinkDestAnyThe flag of matching any destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.17 |
hpnicfAclLinkTimeRangeNameThe Time-range of link-based acl rule.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.18 |
hpnicfAclLinkEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.19 |
hpnicfAclLinkRowStatusRowStatus, now support three state: CreateAndGo, Active, Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.20 |
hpnicfAclLinkTypeCodeThe type of layer 2 protocol.0x0000...0xffff.rw OCTET STRING ( SIZE .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.21 |
hpnicfAclLinkTypeMaskThe mask of layer 2 protocol.0x0000...0xffff.rw OCTET STRING ( SIZE .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.22 |
hpnicfAclLinkLsapCodeThe type of LSAP.0x0000...0xffff.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.23 |
hpnicfAclLinkLsapMaskThe mask of LSAP.0x0000...0xffff.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.24 |
hpnicfAclLinkL2LabelRangeOpOperation symbol of the MPLS label. If the symbol is range(5), the objects hpnicfAclLinkL2LabelRangeBegin and hpnicfAclLinkL2LabelRangeEnd should have different values indicating a range. Otherwise, only hpnicfAclLinkL2LabelRangeBegin counts, object hpnicfAclLinkL2LabelRangeEnd is ignored. invalid(0) -- unavailable lt(1) -- less than eq(2) -- equal gt(3) -- great than neq(4) -- not equal range(5) -- a range with two ends includedrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.25 |
hpnicfAclLinkL2LabelRangeBeginThe beginning of VPLS VC label.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.26 |
hpnicfAclLinkL2LabelRangeEndThe end of VPLS VC label.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.27 |
hpnicfAclLinkMplsExpThe value of MPLS-packet's Exp.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.28 |
hpnicfAclUserTableCreate user acl. SEQUENCE OF HpnicfAclUserEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8 |
hpnicfAclUserEntryThe entry of user acl table. HpnicfAclUserEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1 |
hpnicfAclUserAclNumThe number of the user acl. Integer32 (0|5000..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.1 |
hpnicfAclUserSubitemThe subitem of the user acl. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.2 |
hpnicfAclUserActThe action of the user acl.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.3 |
hpnicfAclUserFormatTypeFormat type.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.4 |
hpnicfAclUserVlanTagVlan tag exits or not.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.5 |
hpnicfAclUserRuleStrRule string.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.6 |
hpnicfAclUserRuleMaskRule mask.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.7 |
hpnicfAclUserTimeRangeNameThe Time-range of the user defined acl.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.8 |
hpnicfAclUserEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.9 |
hpnicfAclUserRowStatusRowStatus, now support three state: CreateAndGo, Active, Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.10 |
hpnicfAclActiveTableActive acl. SEQUENCE OF HpnicfAclActiveEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9 |
hpnicfAclActiveEntryThe entry of active acl table. HpnicfAclActiveEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1 |
hpnicfAclActiveAclIndexAcl index. Integer32 (0|1..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.1 |
hpnicfAclActiveIfIndexIfIndex. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.2 |
hpnicfAclActiveVlanIDThe lower 16 bits is Vlan ID, the higher 16 bits, if not zero, it describes the slot ID of the L3plus board. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.3 |
hpnicfAclActiveDirectionDirection. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.4 |
hpnicfAclActiveUserAclNumThe number of the user acl.rw Integer32 (0|5000..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.5 |
hpnicfAclActiveUserAclSubitemThe subitem of the user acl.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.6 |
hpnicfAclActiveIpAclNumThe number of the IP acl.rw Integer32 (0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.7 |
hpnicfAclActiveIpAclSubitemThe subitem of the IP acl.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.8 |
hpnicfAclActiveLinkAclNumThe num of the link acl.rw Integer32 (0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.9 |
hpnicfAclActiveLinkAclSubitemThe subitem of the link acl.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.10 |
hpnicfAclActiveRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.11 |
hpnicfAclActiveRowStatusRowStatus, now support three state: CreateAndGo, Active, Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.12 |
hpnicfAclIDSTableConfigure the rule for IDS. SEQUENCE OF HpnicfAclIDSEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10 |
hpnicfAclIDSEntryThe entry of acl ids table. HpnicfAclIDSEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1 |
hpnicfAclIDSNameThe name index of the IDS table. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.1 |
hpnicfAclIDSSrcMacSource mac of IDS acl rule.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.2 |
hpnicfAclIDSDestMacDestination mac of IDS acl rule.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.3 |
hpnicfAclIDSSrcIpSource IP-address of IDS acl rule.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.4 |
hpnicfAclIDSSrcWildSource IP-address wild of IDS acl rule.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.5 |
hpnicfAclIDSDestIpDestination IP-address of IDS acl rule.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.6 |
hpnicfAclIDSDestWildDestination IP-address wild of IDS acl rule.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.7 |
hpnicfAclIDSSrcPortThe fourth layer source port.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.8 |
hpnicfAclIDSDestPortThe fourth layer destination port.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.9 |
hpnicfAclIDSProtocolThe protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol(2) ip Any IP protocol ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17)rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.10 |
hpnicfAclIDSDenyTimeThe maximum number of seconds which deny for this acl rule.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.11 |
hpnicfAclIDSActThe action of IDS acl rule.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.12 |
hpnicfAclIDSRowStatusRowStatus, now supports three states: CreateAndGo, Active, and Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.13 |
hpnicfAclMib2Objects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.2 |
hpnicfAclMib2GlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1 |
hpnicfAclMib2NodesGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1 |
hpnicfAclMib2ModeThe applying mode of ACL.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.1 |
hpnicfAclMib2VersionThe version of this file. The output value has the format of 'xx'or 'xxx'. For example: 10 means 1.0; 125 means 12.5.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.2 |
hpnicfAclMib2ObjectsCapabilitiesThe objects of hpnicfAclMib2Objects.ro Bits .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.3 |
hpnicfAclMib2ProcessingStatusThe processing status of ACL operation.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.4 |
hpnicfAclMib2CapabilityTableThe capability of mib2. SEQUENCE OF HpnicfAclMib2CapabilityEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2 |
hpnicfAclMib2CapabilityEntryThe information of Capability of mib2. HpnicfAclMib2CapabilityEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1 |
hpnicfAclMib2EntityTypeThe type of entity. system: The entity is systemic level. interface: The entity is interface level. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.1 |
hpnicfAclMib2EntityIndexThe index of entity. If hpnicfAclMib2EntityType is system, the value of this object is 0. If hpnicfAclMib2EntityType is interface, the value of this object is equal to 'ifIndex'. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.2 |
hpnicfAclMib2ModuleIndexThe module index of ACL. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.3 |
hpnicfAclMib2CharacteristicsIndexThe characteristics index of mib2. See DESCRIPTION of hpnicfAclMib2CharacteristicsValue to get detail information about the value of this object. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.4 |
hpnicfAclMib2CharacteristicsDescThe description of characteristics.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.5 |
hpnicfAclMib2CharacteristicsValueThe value of capability of this object. TypeOfRuleStringValue : notSupport(0) and the length of RuleString. TypeOfCodeValue : OnlyOneNotSupport(0), MoreThanOneNotSupport(1) If hpnicfAclMib2CharacteristicsValue is 'moreThanOneNotSupport', hpnicfAclMib2CharacteristicsDesc must be used to depict which protocols are not supported. The output value of hpnicfAclMib2CharacteristicsDesc has the format of 'a,b'. For example, 'ip,rarp'. layer3 Module: Index Characteristics value 1 SourceIPAddress notSupport(0) 2 DestinationIPAddress notSupport(0) 3 SourcePort notSupport(0) 4 DestinationPort notSupport(0) 5 IPPrecedence notSupport(0) 6 TOS notSupport(0) 7 DSCP notSupport(0) 8 TCPFlag notSupport(0) 9 FragmentFlag notSupport(0) 10 Log notSupport(0) 11 RuleMatchCounter notSupport(0) 12 ResetRuleMatchCounter notSupport(0) 13 VPN notSupport(0) 15 protocol notSupport(0) 16 AddressFlag notSupport(0) layer2 Module: Index Characteristics value 1 ProtocolType TypeOfCodeValue 2 SourceMAC notSupport(0) 3 DestinationMAC notSupport(0) 4 LSAPType TypeOfCodeValue 5 CoS notSupport(0) UserDefined Module: Index Characteristics value 1 UserDefaultOffset TypeOfRuleStringValue 2 UserL2RuleOffset TypeOfRuleStringValue 3 UserMplsOffset TypeOfRuleStringValue 4 UserIPv4Offset TypeOfRuleStringValue 5 UserIPv6Offset TypeOfRuleStringValue 6 UserL4Offset TypeOfRuleStringValue 7 UserL5Offset TypeOfRuleStringValuero Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.6 |
hpnicfAclNumberGroupTableA table of the number acl group information. SEQUENCE OF HpnicfAclNumberGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3 |
hpnicfAclNumberGroupEntryNumber acl group information entry. HpnicfAclNumberGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1 |
hpnicfAclNumberGroupTypeThe type of number group. Basic ACL and Advanced ACL support ipv4 and ipv6. The range of Basic ACL is from 2000 to 2999. The range of Advanced ACL is from 3000 to 3999. Simple ACL supports ipv6 only. The range of Simple ACL is from 10000 to 42767. MAC ACL support mac only. The range of MAC ACL is from 4000 to 4999. User-defined ACL support user only. The range of user-defined ACL is from 5000 to 5999. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.1 |
hpnicfAclNumberGroupIndexThe group index of number acl. Basic type:2000..2999 Advanced type:3000..3999 MAC type:4000..4999 User type:5000..5999 Simple type:10000..42767 Integer32 (2000..5999|10000..42767) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.2 |
hpnicfAclNumberGroupRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.3 |
hpnicfAclNumberGroupMatchOrderThe match-order of number acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.4 |
hpnicfAclNumberGroupStepThe step of rule index.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.5 |
hpnicfAclNumberGroupDescriptionDescription of this acl group.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.6 |
hpnicfAclNumberGroupCountClearReset the value of counters of this group.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.7 |
hpnicfAclNumberGroupRuleCounterThe rule count of number acl group.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.8 |
hpnicfAclNumberGroupNameName of this acl group.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.9 |
hpnicfAclNamedGroupTableA table of the named ACL group. SEQUENCE OF HpnicfAclNamedGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4 |
hpnicfAclNamedGroupEntryNamed ACL group entry. HpnicfAclNamedGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1 |
hpnicfAclNamedGroupCategoryThe category of number group. 1 indicates basic ACL, 2 indicates advanced ACL. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.1 |
hpnicfAclNamedGroupNameName of an ACL group, a case-insensitive string of 1 to 63 characters. It must start with an English letter. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.2 |
hpnicfAclNamedGroupRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.3 |
hpnicfAclNamedGroupMatchOrderThe match-order of name acl group.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.4 |
hpnicfAclNamedGroupStepThe numbering step of the increment of the rule index.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.5 |
hpnicfAclNamedGroupDescriptionDescription of this ACL group.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.6 |
hpnicfAclNamedGroupCountClearReset the statistics counter of this group.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.7 |
hpnicfAclNamedGroupRuleCounterThe amount of rules of this group.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.8 |
hpnicfAclIPAclGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2 |
hpnicfAclIPAclBasicTableA table of basic rule group. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read. SEQUENCE OF HpnicfAclIPAclBasicEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2 |
hpnicfAclIPAclBasicEntryBasic rule group information. HpnicfAclIPAclBasicEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1 |
hpnicfAclIPAclBasicRuleIndexThe rule index of basic acl group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.1 |
hpnicfAclIPAclBasicRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.2 |
hpnicfAclIPAclBasicActThe action of basic acl rule.rw RuleAction .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.3 |
hpnicfAclIPAclBasicSrcAddrTypeThe IP addresses type of IP pool.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.4 |
hpnicfAclIPAclBasicSrcAddrThe value of a local IP address is available for this association. The type of this address is determined by the value of hpnicfAclIPAclBasicSrcAddrType.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.5 |
hpnicfAclIPAclBasicSrcPrefixDenotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.6 |
hpnicfAclIPAclBasicSrcAnyThe flag of matching any IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.7 |
hpnicfAclIPAclBasicSrcWildSource IPv4 address wildcard mask. Only IPv4 Basic Rule supports this object. Default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.8 |
hpnicfAclIPAclBasicTimeRangeNameThe Time-range of basic acl rule. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.9 |
hpnicfAclIPAclBasicFragmentFlagThe flag of matching fragmented packets.rw FragmentFlag .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.10 |
hpnicfAclIPAclBasicLogThe packet will be logged when it matches the rule.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.11 |
hpnicfAclIPAclBasicCountThe count of matches by the rule.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.12 |
hpnicfAclIPAclBasicCountClearReset the value of counter.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.13 |
hpnicfAclIPAclBasicEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.14 |
hpnicfAclIPAclBasicVpnInstanceNameThe VPN name, to which the rule will be applied. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.15 |
hpnicfAclIPAclBasicCommentThe description of ACL rule. Default value is Zero-length String.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.16 |
hpnicfAclIPAclBasicCountingThe packet will be counted when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.17 |
hpnicfAclIPAclBasicRouteTypeAnyThe flag of matching any type of routing header of IPv6 packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.18 |
hpnicfAclIPAclBasicRouteTypeValueMatch specific type of routing header of IPv6 packet.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.19 |
hpnicfAclIPAclAdvancedTableA table of advanced and simple acl group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. SEQUENCE OF HpnicfAclIPAclAdvancedEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3 |
hpnicfAclIPAclAdvancedEntryAdvanced acl group information. HpnicfAclIPAclAdvancedEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1 |
hpnicfAclIPAclAdvancedRuleIndexThe rule index of advanced acl group. As a Simple ACL group, the value of this object must be 0. As an Advanced ACL group, the value of this object is ranging from 0 to 65534. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.1 |
hpnicfAclIPAclAdvancedRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.2 |
hpnicfAclIPAclAdvancedActThe action of advanced acl rule.rw RuleAction .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.3 |
hpnicfAclIPAclAdvancedProtocolThe protocol-type of advanced acl group. 0 indicates any IPv4 or IPv6 protocol. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) icmpv6 Internet Control Message Protocol6(58) igmp Internet Group Management Protocol(2) ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) ipv6-ah IPv6 Authentication Header(51) ipv6-esp IPv6 Encapsulating Security Payload(50)rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.4 |
hpnicfAclIPAclAdvancedAddrFlagAddress flag to select address.rw AddressFlag .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.5 |
hpnicfAclIPAclAdvancedSrcAddrTypeThe IP addresses type of IP pool.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.6 |
hpnicfAclIPAclAdvancedSrcAddrThe value of a local IP address available for this association. The type of this address is determined by the value of hpnicfAclIPAclAdvancedSrcAddrType.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.7 |
hpnicfAclIPAclAdvancedSrcPrefixDenotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.8 |
hpnicfAclIPAclAdvancedSrcAnyThe flag of matching any IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.9 |
hpnicfAclIPAclAdvancedSrcWildSource IPv4 address wildcard mask. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.10 |
hpnicfAclIPAclAdvancedSrcOpSource port operation symbol of advanced acl group.rw PortOp .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.11 |
hpnicfAclIPAclAdvancedSrcPort1The fourth layer source port1.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.12 |
hpnicfAclIPAclAdvancedSrcPort2The fourth layer source port2.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.13 |
hpnicfAclIPAclAdvancedDestAddrTypeThe IP addresses type of IP pool.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.14 |
hpnicfAclIPAclAdvancedDestAddrThe value of a local IP address available for this association. The type of this address is determined by the value of hpnicfAclIPAclAdvancedDestAddrType.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.15 |
hpnicfAclIPAclAdvancedDestPrefixDenotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.16 |
hpnicfAclIPAclAdvancedDestAnyThe flag of matching any IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.17 |
hpnicfAclIPAclAdvancedDestWildDestination IPv4 address wildcard mask. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.18 |
hpnicfAclIPAclAdvancedDestOpDestination port operation symbol of advanced acl group.rw PortOp .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.19 |
hpnicfAclIPAclAdvancedDestPort1The fourth layer destination port1.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.20 |
hpnicfAclIPAclAdvancedDestPort2The fourth layer destination port2.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.21 |
hpnicfAclIPAclAdvancedIcmpTypeThe type of ICMP packet.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.22 |
hpnicfAclIPAclAdvancedIcmpCodeThe code of ICMP packet.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.23 |
hpnicfAclIPAclAdvancedPrecedenceThe value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7)rw Integer32 (0..7|255) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.24 |
hpnicfAclIPAclAdvancedTosThe value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max throughput TOS(4) min-delay Match packets with min delay TOS(8) min-monetary-cost Match packets with min monetary cost TOS(1) normal Match packets with normal TOS(0)rw Integer32 (0..15|255) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.25 |
hpnicfAclIPAclAdvancedDscpThe value of DSCP of IP packet.rw DSCPValue .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.26 |
hpnicfAclIPAclAdvancedTimeRangeNameThe Time-range of advanced acl rule. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.27 |
hpnicfAclIPAclAdvancedTCPFlagThe packet type of TCP protocol.rw TCPFlag .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.28 |
hpnicfAclIPAclAdvancedFragmentFlagThe flag of matching fragmented packet, and now support two value: 0 or 2.rw FragmentFlag .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.29 |
hpnicfAclIPAclAdvancedLogLog matched packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.30 |
hpnicfAclIPAclAdvancedCountThe count of matched by the rule.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.31 |
hpnicfAclIPAclAdvancedCountClearReset the value of counter.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.32 |
hpnicfAclIPAclAdvancedEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.33 |
hpnicfAclIPAclAdvancedVpnInstanceNameThe VPN name that the rule will be applied. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.34 |
hpnicfAclIPAclAdvancedCommentThe description of ACL rule. Default value is Zero-length String.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.35 |
hpnicfAclIPAclAdvancedReflectiveThe flag of reflective.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.36 |
hpnicfAclIPAclAdvancedCountingThe packet will be counted when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.37 |
hpnicfAclIPAclAdvancedTCPFlagMaskThe TCP Flag Mask. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg |rw Bits .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.38 |
hpnicfAclIPAclAdvancedTCPFlagValueThe TCP Flag Value. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg |rw Bits .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.39 |
hpnicfAclIPAclAdvancedRouteTypeAnyThe flag of matching any type of routing header of IPv6 packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.40 |
hpnicfAclIPAclAdvancedRouteTypeValueThe type of routing header of IPv6 packet.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.41 |
hpnicfAclIPAclAdvancedFlowLabelThe value of flow label of IPv6 packet header.rw Unsigned32 (0..1048575|4294967295) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.42 |
hpnicfAclIPAclAdvancedSrcSuffixDenotes the length of a generic Internet network address suffix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the least significant bit and all other bits set to 0.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.43 |
hpnicfAclIPAclAdvancedDestSuffixDenotes the length of a generic Internet network address suffix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the least significant bit and all other bits set to 0.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.44 |
hpnicfAclIPAclNamedBscTableA table of basic rule of named ACL. The name of ACL group will be used as an index in this table, which differs from the table hpnicfAclIPAclBasicTable. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read. SEQUENCE OF HpnicfAclIPAclNamedBscEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4 |
hpnicfAclIPAclNamedBscEntryBasic named ACL rule entry. HpnicfAclIPAclNamedBscEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1 |
hpnicfAclIPAclNamedBscRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.1 |
hpnicfAclIPAclNamedBscActThe action of basic ACL rule.rw RuleAction .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.2 |
hpnicfAclIPAclNamedBscSrcAddrTypeThe IP addresses type of IP pool.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.3 |
hpnicfAclIPAclNamedBscSrcAddrThe specified source IP address. The type of this address is determined by the value of hpnicfAclIPAclNamedBscSrcAddrType.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.4 |
hpnicfAclIPAclNamedBscSrcPrefixSpecify the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.5 |
hpnicfAclIPAclNamedBscSrcAnyThe flag of matching any source IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.6 |
hpnicfAclIPAclNamedBscSrcWildSource IPv4 address wildcard mask. Only IPv4 Basic Rule supports this object. Default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.7 |
hpnicfAclIPAclNamedBscTRangeNameThe Time-range of basic acl rule. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.8 |
hpnicfAclIPAclNamedBscFragmentFlagThe flag of matching fragmented packets.rw FragmentFlag .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.9 |
hpnicfAclIPAclNamedBscLogThe packet will be logged when it matches the rule.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.10 |
hpnicfAclIPAclNamedBscCountThe count of matches by the rule.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.11 |
hpnicfAclIPAclNamedBscCountClearReset the statistics counter of the rule.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.12 |
hpnicfAclIPAclNamedBscEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.13 |
hpnicfAclIPAclNamedBscVpnInstNameThe VPN name, to which the rule will be applied. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.14 |
hpnicfAclIPAclNamedBscCommentThe description of ACL rule. Default value is Zero-length String.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.15 |
hpnicfAclIPAclNamedBscCountingThe packet will be counted when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.16 |
hpnicfAclIPAclNamedBscRouteTypeAnyThe flag of matching any type of routing header of IPv6 packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.17 |
hpnicfAclIPAclNamedBscRouteTypeValueValue of the routing header type of IPv6 packet, in the range of 0 to 255.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.18 |
hpnicfAclIPAclNamedAdvTableA table of advanced rule of named ACL. The name of ACL group will be used as an index in this table, which differs from the table hpnicfAclIPAclAdvancedTable. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read. SEQUENCE OF HpnicfAclIPAclNamedAdvEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5 |
hpnicfAclIPAclNamedAdvEntryAdvanced ACL rule information entry. HpnicfAclIPAclNamedAdvEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1 |
hpnicfAclIPAclNamedAdvRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.1 |
hpnicfAclIPAclNamedAdvActThe action of advanced ACL rule.rw RuleAction .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.2 |
hpnicfAclIPAclNamedAdvProtocolThe protocol-type of advanced ACL rule. 0 indicates any IPv4 or IPv6 protocol. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) icmpv6 Internet Control Message Protocol6(58) igmp Internet Group Management Protocol(2) ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) ipv6-ah IPv6 Authentication Header(51) ipv6-esp IPv6 Encapsulating Security Payload(50)rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.3 |
hpnicfAclIPAclNamedAdvAddrFlagAddress flag to select address.rw AddressFlag .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.4 |
hpnicfAclIPAclNamedAdvSrcAddrTypeThe type of source IP address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.5 |
hpnicfAclIPAclNamedAdvSrcAddrThe specified source IP address. The type of this address is determined by the value of hpnicfAclIPAclNamedAdvSrcAddrType.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.6 |
hpnicfAclIPAclNamedAdvSrcPrefixSpecify the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.7 |
hpnicfAclIPAclNamedAdvSrcAnyThe flag of matching any IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.8 |
hpnicfAclIPAclNamedAdvSrcWildSource IPv4 address wildcard mask. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.9 |
hpnicfAclIPAclNamedAdvSrcOpSource port operation symbol of advanced acl group.rw PortOp .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.10 |
hpnicfAclIPAclNamedAdvSrcPort1The fourth layer source port1.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.11 |
hpnicfAclIPAclNamedAdvSrcPort2The fourth layer source port2.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.12 |
hpnicfAclIPAclNamedAdvDstAddrTypeThe type of destination IP address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.13 |
hpnicfAclIPAclNamedAdvDstAddrThe specified destination IP address. The type of this address is determined by the value of hpnicfAclIPAclNamedAdvDstAddrType.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.14 |
hpnicfAclIPAclNamedAdvDstPrefixSpecify the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.15 |
hpnicfAclIPAclNamedAdvDstAnyThe flag of matching any IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.16 |
hpnicfAclIPAclNamedAdvDstWildDestination IPv4 address wildcard mask. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.17 |
hpnicfAclIPAclNamedAdvDstOpDestination port operation symbol of advanced acl group.rw PortOp .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.18 |
hpnicfAclIPAclNamedAdvDstPort1The fourth layer destination port1.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.19 |
hpnicfAclIPAclNamedAdvDstPort2The fourth layer destination port2.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.20 |
hpnicfAclIPAclNamedAdvIcmpTypeThe type of ICMP packet.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.21 |
hpnicfAclIPAclNamedAdvIcmpCodeThe code of ICMP packet.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.22 |
hpnicfAclIPAclNamedAdvPrecedenceThe value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7)rw Integer32 (0..7|255) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.23 |
hpnicfAclIPAclNamedAdvTosThe value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max throughput TOS(4) min-delay Match packets with min delay TOS(8) min-monetary-cost Match packets with min monetary cost TOS(1) normal Match packets with normal TOS(0)rw Integer32 (0..15|255) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.24 |
hpnicfAclIPAclNamedAdvDscpThe value of DSCP of IP packet.rw DSCPValue .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.25 |
hpnicfAclIPAclNamedAdvTRangeNameThe Time-range of advanced ACL rule. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.26 |
hpnicfAclIPAclNamedAdvTCPFlagThe packet type of TCP protocol.rw TCPFlag .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.27 |
hpnicfAclIPAclNamedAdvFragmentFlagThe flag of matching fragmented packet, and now support two value: 0 or 2.rw FragmentFlag .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.28 |
hpnicfAclIPAclNamedAdvLogLog matched packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.29 |
hpnicfAclIPAclNamedAdvCountThe count of matches by the rule.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.30 |
hpnicfAclIPAclNamedAdvCountClearReset the statistics counter of this rule.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.31 |
hpnicfAclIPAclNamedAdvEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.32 |
hpnicfAclIPAclNamedAdvVpnInstNameThe VPN name to which the rule will be applied. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.33 |
hpnicfAclIPAclNamedAdvCommentThe description of ACL rule. Default value is zero-length String.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.34 |
hpnicfAclIPAclNamedAdvReflectiveThe flag of reflective.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.35 |
hpnicfAclIPAclNamedAdvCountingThe packet will be counted when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.36 |
hpnicfAclIPAclNamedAdvTCPFlagMaskThe TCP Flag Mask. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg |rw Bits .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.37 |
hpnicfAclIPAclNamedAdvTCPFlagValueThe TCP Flag Value. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg |rw Bits .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.38 |
hpnicfAclIPAclNamedAdvRouteTypeAnyThe flag of matching any type of routing header of IPv6 packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.39 |
hpnicfAclIPAclNamedAdvRouteTypeValueThe type of routing header of IPv6 packet.rw Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.40 |
hpnicfAclIPAclNamedAdvFlowLabelThe value of flow label of IPv6 packet header.rw Unsigned32 (0..1048575|4294967295) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.41 |
hpnicfAclIPAclNamedAdvSrcSuffixDenotes the length of a generic Internet network address suffix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the least significant bit and all other bits set to 0.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.42 |
hpnicfAclIPAclNamedAdvDstSuffixDenotes the length of a generic Internet network address suffix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the least significant bit and all other bits set to 0.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.43 |
hpnicfAclMACAclGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3 |
hpnicfAclMACTableA table of MAC acl group. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read. SEQUENCE OF HpnicfAclMACEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1 |
hpnicfAclMACEntryMAC acl group information. HpnicfAclMACEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1 |
hpnicfAclMACRuleIndexThe rule index of MAC-based acl group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.1 |
hpnicfAclMACRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.2 |
hpnicfAclMACActThe action of MAC acl rule.rw RuleAction .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.3 |
hpnicfAclMACTypeCodeThe type of protocol.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.4 |
hpnicfAclMACTypeMaskThe mask of protocol.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.5 |
hpnicfAclMACSrcMacSource MAC of MAC acl rule. Default value is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.6 |
hpnicfAclMACSrcMacWildSource MAC wildzard of MAC acl rule. Default value is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.7 |
hpnicfAclMACDestMacDestination MAC of MAC acl rule. Default value is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.8 |
hpnicfAclMACDestMacWildDestination MAC wildzard of MAC acl rule. Default value is '00:00:00:00:00:00'rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.9 |
hpnicfAclMACLsapCodeThe type of LSAP.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.10 |
hpnicfAclMACLsapMaskThe mask of LSAP.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.11 |
hpnicfAclMACCosVlan priority of MAC acl rule.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.12 |
hpnicfAclMACTimeRangeNameThe Time-range of MAC acl rule. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.13 |
hpnicfAclMACCountThe count of matched frames by the rule.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.14 |
hpnicfAclMACCountClearReset the value of counter.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.15 |
hpnicfAclMACEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.16 |
hpnicfAclMACCommentThe description of ACL rule. Default value is Zero-length String.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.17 |
hpnicfAclMACLogThe packet will be logged when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.18 |
hpnicfAclMACCountingThe packet will be counted when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.19 |
hpnicfAclNamedMACTableA table of named MAC ACL rule. The name of ACL group will be used as an index in this table, which differs from the table hpnicfAclMACTable. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read. SEQUENCE OF HpnicfAclNamedMACEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2 |
hpnicfAclNamedMACEntryMAC acl group information. HpnicfAclNamedMACEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1 |
hpnicfAclNamedMACRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.1 |
hpnicfAclNamedMACActThe action of MAC ACL rule.rw RuleAction .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.2 |
hpnicfAclNamedMACTypeCodeThe type of protocol.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.3 |
hpnicfAclNamedMACTypeMaskThe mask of protocol.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.4 |
hpnicfAclNamedMACSrcMacSource MAC of MAC ACL rule. Default value is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.5 |
hpnicfAclNamedMACSrcMacWildSource MAC wildcard of MAC ACL rule. Default value is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.6 |
hpnicfAclNamedMACDstMacDestination MAC of MAC ACL rule. Default value is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.7 |
hpnicfAclNamedMACDstMacWildDestination MAC wildcard of MAC ACL rule. Default value is '00:00:00:00:00:00'rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.8 |
hpnicfAclNamedMACLsapCodeThe type of LSAP.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.9 |
hpnicfAclNamedMACLsapMaskThe mask of LSAP.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.10 |
hpnicfAclNamedMACCosVlan priority of MAC ACL rule.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.11 |
hpnicfAclNamedMACTimeRangeNameThe time-range of MAC ACL rule. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.12 |
hpnicfAclNamedMACCountThe count of matched frames by the rule.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.13 |
hpnicfAclNamedMACCountClearReset the value of counter.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.14 |
hpnicfAclNamedMACEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.15 |
hpnicfAclNamedMACCommentThe description of ACL rule. Default value is Zero-length String.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.16 |
hpnicfAclNamedMACLogThe packet will be logged when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.17 |
hpnicfAclNamedMACCountingThe packet will be counted when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.18 |
hpnicfAclEnUserAclGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4 |
hpnicfAclEnUserTableA table of user acl group information. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. SEQUENCE OF HpnicfAclEnUserEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3 |
hpnicfAclEnUserEntryUser defined acl group entry. HpnicfAclEnUserEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1 |
hpnicfAclEnUserRuleIndexThe subitem of the user acl. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.1 |
hpnicfAclEnUserRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.2 |
hpnicfAclEnUserActThe action of user defined acl rule.rw RuleAction .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.3 |
hpnicfAclEnUserStartStringThe rule, matching packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value of this object is defined by product and it indicates the offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: 10,10af,ffff. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.4 |
hpnicfAclEnUserL2StringThe rule, matching layer 2 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.5 |
hpnicfAclEnUserMplsStringThe rule, matching mpls packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.6 |
hpnicfAclEnUserIPv4StringThe rule, matching IPv4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.7 |
hpnicfAclEnUserIPv6StringThe rule, matching IPv6 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.8 |
hpnicfAclEnUserL4StringThe rule, matching layer 4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.9 |
hpnicfAclEnUserL5StringThe rule, matching layer 5 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.10 |
hpnicfAclEnUserTimeRangeNameThe Time-range of user acl rule. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.11 |
hpnicfAclEnUserCountThe count of matched by the rule.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.12 |
hpnicfAclEnUserCountClearReset the value of counter.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.13 |
hpnicfAclEnUserEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.14 |
hpnicfAclEnUserCommentThe description of ACL rule. Default value is Zero-length String.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.15 |
hpnicfAclEnUserLogThe packet will be logged when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.16 |
hpnicfAclEnUserCountingThe packet will be counted when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.17 |
hpnicfAclNamedUserTableA table of named user acl rule. The name of ACL group will be used as an index in this table, which differs from the table hpnicfAclEnUserTable. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. SEQUENCE OF HpnicfAclNamedUserEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4 |
hpnicfAclNamedUserEntryUser defined acl group entry. HpnicfAclNamedUserEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1 |
hpnicfAclNamedUserRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.1 |
hpnicfAclNamedUserActThe action of user defined acl rule.rw RuleAction .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.2 |
hpnicfAclNamedUserStartStringThe rule, matching packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value of this object is defined by product and it indicates the offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: 10,10af,ffff. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.3 |
hpnicfAclNamedUserL2StringThe rule, matching layer 2 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.4 |
hpnicfAclNamedUserMplsStringThe rule, matching mpls packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.5 |
hpnicfAclNamedUserIPv4StringThe rule, matching IPv4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.6 |
hpnicfAclNamedUserIPv6StringThe rule, matching IPv6 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.7 |
hpnicfAclNamedUserL4StringThe rule, matching layer 4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.8 |
hpnicfAclNamedUserL5StringThe rule, matching layer 5 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.9 |
hpnicfAclNamedUserTimeRangeNameThe Time-range of user acl rule. Default value is zero-length.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.10 |
hpnicfAclNamedUserCountThe count of matched by the rule.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.11 |
hpnicfAclNamedUserCountClearReset the value of counter.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.12 |
hpnicfAclNamedUserEnableThe rule is active or not. true : active false : inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.13 |
hpnicfAclNamedUserCommentThe description of ACL rule. Default value is Zero-length String.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.14 |
hpnicfAclNamedUserLogThe packet will be logged when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.15 |
hpnicfAclNamedUserCountingThe packet will be counted when it matches the rule. It is disabled by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.16 |
hpnicfAclResourceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5 |
hpnicfAclResourceUsageTableThe table shows ACL resource usage information. Support for resource types that are denoted by hpnicfAclResourceType object varies with products. If a type is not supported, the corresponding row for the type will not be instantiated in this table. SEQUENCE OF HpnicfAclResourceUsageEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1 |
hpnicfAclResourceUsageEntryEach row contains a brief description of the resource type, a port range associated with the chip, total, reserved, and configured amount of resource of this type, the percent of resource that has been allocated, and so on. HpnicfAclResourceUsageEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1 |
hpnicfAclResourceChassisThe chassis number. On a centralized or distributed device, the value for this node is always zero. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.1 |
hpnicfAclResourceSlotThe slot number. On a centralized device, the value for this node is always zero. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.2 |
hpnicfAclResourceChipThe chip number. On a single chip device, the value for this node is always zero. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.3 |
hpnicfAclResourceTypeThe resource type. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.4 |
hpnicfAclPortRangeThe port range associated with the chip. Commas are used to separate multiple port ranges, for example, Ethernet1/2 to Ethernet1/12, Ethernet1/31 to Ethernet1/48.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.5 |
hpnicfAclResourceTotalTotal TCAM entries of the resource type.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.6 |
hpnicfAclResourceReservedThe amount of reserved TCAM entries of the resource type.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.7 |
hpnicfAclResourceConfiguredThe amount of configured TCAM entries of the resource type.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.8 |
hpnicfAclResourceUsagePercentThe percent of TCAM entries that have been used for this resource type.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.9 |
hpnicfAclResourceTypeDescriptionThe description of this resource type.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.10 |
hpnicfAclIntervalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.2.6 |
hpnicfAclIntervalTableLog interval table. SEQUENCE OF HpnicfAclIntervalEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1 |
hpnicfAclIntervalEntryLog interval entry. HpnicfAclIntervalEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1.1 |
hpnicfAclIntervalTypeThe types of the interval specified for generating packet filtering logs or traps. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1.1.1 |
hpnicfAclIntervalValueThe value of interval. It must be a multiple of 5 and in the range of 5 to 1440.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1.1.2 |
hpnicfAclIntervalRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1.1.3 |
hpnicfAclPacketFilterObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.3 |
hpnicfPfilterScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.3.1 |
hpnicfPfilterDefaultActionThe default action of packet filter. By default, the packet filter permits packets that do not match any ACL rule to pass.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.1.1 |
hpnicfPfilterProcessingStatusThis object shows the status of the system when applying packet filter. It is forbidden to set or read in hpnicfAclPacketFilterObjects MIB module when the value is processing.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.1.2 |
hpnicfPfilterApplyTableA table of packet filter application. It's not supported to set default action on an entity, but supported to enable hardware count of default action on an entity. SEQUENCE OF HpnicfPfilterApplyEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2 |
hpnicfPfilterApplyEntryPacket filter application information entry. HpnicfPfilterApplyEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1 |
hpnicfPfilterApplyObjTypeThe object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.1 |
hpnicfPfilterApplyObjIndexThe object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0 Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.2 |
hpnicfPfilterApplyDirectionThe direction of packet filter application. DirectionType .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.3 |
hpnicfPfilterApplyAclTypeACL Type: IPv4, IPv6, default action, MAC, and user. Take default action as a special ACL group. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.4 |
hpnicfPfilterApplyAclIndexThe ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 Default action type: 0 Integer32 (0|2000..5999) .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.5 |
hpnicfPfilterApplyHardCountHardware count flag. true: enable hardware count false: disable hardware countrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.6 |
hpnicfPfilterApplySequenceThe configure sequence of packet filter application.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.7 |
hpnicfPfilterApplyCountClearClear the value of counters.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.8 |
hpnicfPfilterApplyRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.9 |
hpnicfPfilterAclGroupRunInfoTableA table of group running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the statistics entry will be zero. SEQUENCE OF HpnicfPfilterAclGroupRunInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3 |
hpnicfPfilterAclGroupRunInfoEntryACL group running information entry for packet filtering. HpnicfPfilterAclGroupRunInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1 |
hpnicfPfilterRunApplyObjTypeThe object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.1 |
hpnicfPfilterRunApplyObjIndexThe object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0 Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.2 |
hpnicfPfilterRunApplyDirectionThe direction of packet filter application. DirectionType .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.3 |
hpnicfPfilterRunApplyAclTypeACL Type: IPv4, IPv6, default action, MAC, and user. Take default action as a special ACL group. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.4 |
hpnicfPfilterRunApplyAclIndexThe ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 MAC default action: 1 IPv4 default action: 2 IPv6 default action: 3 Integer32 (1..3|2000..5999) .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.5 |
hpnicfPfilterAclGroupStatusThe status of ACL group applied. success: ACL applied successfully on all slots failed: failed to apply ACL on all slots partialSuccess: failed to apply ACL on some slotsro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.6 |
hpnicfPfilterAclGroupCountStatusThe status of enabling hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slotsro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.7 |
hpnicfPfilterAclGroupPermitPktsThe number of packets permitted.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.8 |
hpnicfPfilterAclGroupPermitBytesThe number of bytes permitted.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.9 |
hpnicfPfilterAclGroupDenyPktsThe number of packets denied.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.10 |
hpnicfPfilterAclGroupDenyBytesThe number of bytes denied.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.11 |
hpnicfPfilterAclRuleRunInfoTableA table of rule's running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the hpnicfPfilterAclRuleMatchPackets and hpnicfPfilterAclRuleMatchBytes will be zero. SEQUENCE OF HpnicfPfilterAclRuleRunInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.4 |
hpnicfPfilterAclRuleRunInfoEntryACL rule's running information entry. HpnicfPfilterAclRuleRunInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1 |
hpnicfPfilterAclRuleIndexThe ACL rule index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.1 |
hpnicfPfilterAclRuleStatusThe status of rule application. success: rule applied successfully on all slots failed: failed to apply rule on all slots partialSuccess: failed to apply rule on some slotsro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.2 |
hpnicfPfilterAclRuleCountStatusThe status of enabling rule's hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slotsro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.3 |
hpnicfPfilterAclRuleMatchPacketsThe number of packets matched.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.4 |
hpnicfPfilterAclRuleMatchBytesThe number of bytes matched.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.5 |
hpnicfPfilterStatisticSumTableA table of ACL rule's sum statistics information, accumulated by all entity application on all slots. SEQUENCE OF HpnicfPfilterStatisticSumEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.5 |
hpnicfPfilterStatisticSumEntryACL rule's sum statistics information entry. HpnicfPfilterStatisticSumEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1 |
hpnicfPfilterSumDirectionThe direction of application. DirectionType .1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.1 |
hpnicfPfilterSumAclTypeACL type: IPv4, IPv6, MAC, and user. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.2 |
hpnicfPfilterSumAclIndexThe ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.3 |
hpnicfPfilterSumRuleIndexThe ACL rule index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.4 |
hpnicfPfilterSumRuleMatchPacketsThe sum number of packets matched the ACL rule.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.5 |
hpnicfPfilterSumRuleMatchBytesThe sum number of bytes matched the ACL rule.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.6 |
hpnicfPfilter2ApplyTableA table of packet filter application. It's not supported to set default action on an entity, but supported to enable hardware count of default action on an entity. SEQUENCE OF HpnicfPfilter2ApplyEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6 |
hpnicfPfilter2ApplyEntryPacket filter application information entry. HpnicfPfilter2ApplyEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1 |
hpnicfPfilter2ApplyObjTypeThe object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.1 |
hpnicfPfilter2ApplyObjIndexThe object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.2 |
hpnicfPfilter2ApplyDirectionThe direction of packet filter application.ro DirectionType .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.3 |
hpnicfPfilter2ApplyAclTypeACL Type: IPv4, IPv6, default action, MAC, and user. Take default action as a special ACL group.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.4 |
hpnicfPfilter2ApplyAclIndexThe index of ACL group used by packet-filter. If the specified string comprises only digits, it is converted into a numerical sequence in decimal notation, and regarded as an ACL group index or a default action. If the string is a character string beginning with an English letter, it is regarded as an ACL group name. Group index range and default action: Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 Default action type: 0ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.5 |
hpnicfPfilter2ApplyHardCountHardware count flag. true: enable hardware count false: disable hardware countrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.6 |
hpnicfPfilter2ApplySequenceThe configure sequence of packet filter application.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.7 |
hpnicfPfilter2ApplyCountClearClear the value of counters.rw CounterClear .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.8 |
hpnicfPfilter2ApplyRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.9 |
hpnicfPfilter2AclGroupRunInfoTableA table of group running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the statistics entry will be zero. SEQUENCE OF HpnicfPfilter2AclGroupRunInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7 |
hpnicfPfilter2AclGroupRunInfoEntryACL group running information entry for packet filtering. HpnicfPfilter2AclGroupRunInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1 |
hpnicfPfilter2RunApplyObjTypeThe object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.1 |
hpnicfPfilter2RunApplyObjIndexThe object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0 Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.2 |
hpnicfPfilter2RunApplyDirectionThe direction of packet filter application. DirectionType .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.3 |
hpnicfPfilter2RunApplyAclTypeACL Type: IPv4, IPv6, default action, MAC, and user. Take default action as a special ACL group. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.4 |
hpnicfPfilter2RunApplyAclIndexThe index of ACL group used by packet-filter. If the specified string comprises only digits, it is converted into a numerical sequence in decimal notation, and regarded as an ACL group index or a default action. If the string is a character string beginning with an English letter, it is regarded as an ACL group name. Group index range and default action: Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 MAC default action: 1 IPv4 default action: 2 IPv6 default action: 3 OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.5 |
hpnicfPfilter2AclGroupStatusThe status of ACL group applied. success: ACL applied successfully on all slots failed: failed to apply ACL on all slots partialSuccess: failed to apply ACL on some slotsro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.6 |
hpnicfPfilter2AclGroupCountStatusThe status of enabling hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slotsro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.7 |
hpnicfPfilter2AclGroupPermitPktsThe number of packets permitted.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.8 |
hpnicfPfilter2AclGroupPermitBytesThe number of bytes permitted.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.9 |
hpnicfPfilter2AclGroupDenyPktsThe number of packets denied.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.10 |
hpnicfPfilter2AclGroupDenyBytesThe number of bytes denied.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.11 |
hpnicfPfilter2AclRuleRunInfoTableA table of rule's running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the hpnicfPfilter2AclRuleMatchPackets and hpnicfPfilter2AclRuleMatchBytes will be zero. SEQUENCE OF HpnicfPfilter2AclRuleRunInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.8 |
hpnicfPfilter2AclRuleRunInfoEntryACL rule's running information entry. HpnicfPfilter2AclRuleRunInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1 |
hpnicfPfilter2AclRuleIndexThe ACL rule index.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.1 |
hpnicfPfilter2AclRuleStatusThe status of rule application. success: rule applied successfully on all slots failed: failed to apply rule on all slots partialSuccess: failed to apply rule on some slotsro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.2 |
hpnicfPfilter2AclRuleCountStatusThe status of enabling rule's hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slotsro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.3 |
hpnicfPfilter2AclRuleMatchPacketsThe number of packets matched.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.4 |
hpnicfPfilter2AclRuleMatchBytesThe number of bytes matched.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.5 |
hpnicfPfilter2StatisticSumTableA table of ACL rule's sum statistics information, accumulated by all entity application on all slots. SEQUENCE OF HpnicfPfilter2StatisticSumEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.9 |
hpnicfPfilter2StatisticSumEntryACL rule's sum statistics information entry. HpnicfPfilter2StatisticSumEntry .1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1 |
hpnicfPfilter2SumDirectionThe direction of application. DirectionType .1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.1 |
hpnicfPfilter2SumAclTypeACL type: IPv4, IPv6, MAC, and user. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.2 |
hpnicfPfilter2SumAclIndexThe index of ACL group used by packet-filter. If the specified string comprises only digits, it is converted into a numerical sequence in decimal notation, and regarded as an ACL group index. If the string is a character string beginning with an English letter, it is regarded as an ACL group name. Group index range and default action: Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.3 |
hpnicfPfilter2SumRuleIndexThe ACL rule index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.4 |
hpnicfPfilter2SumRuleMatchPacketsThe sum number of packets matched the ACL rule.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.5 |
hpnicfPfilter2SumRuleMatchBytesThe sum number of bytes matched the ACL rule.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.6 |
hpnicfAclPacketfilterTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.4 |
hpnicfPfilterInterfaceThe interface which policy apply.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.1 |
hpnicfPfilterDirectionInbound or outbound.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.2 |
hpnicfPfilterACLNumberACL number.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.4.3 |
hpnicfPfilterActionPermit or deny.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.4 |
hpnicfMACfilterSourceMacSource MAC address.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.5 |
hpnicfMACfilterDestinationMacDestination MAC address.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.6 |
hpnicfPfilterPacketNumberThe number of packets permitted or denied by ACL.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.4.7 |
hpnicfPfilterReceiveInterfaceThe interface where packet come from.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.8 |
hpnicfAclPacketIfNameThe name of the interface on which the packet is matched.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.9 |
hpnicfAclPacketDirectionThe direction the packet is going.ro DirectionType .1.3.6.1.4.1.11.2.14.11.15.2.8.4.10 |
hpnicfAclPacketBAGGThe bridge-aggregation-interface ID the interface belongs to.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.4.11 |
hpnicfAclPacketVlanIDThe vlan the interface belongs to.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.4.12 |
hpnicfAclPacketSrcIPSource IP address of IPv4/IPv6 packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.13 |
hpnicfAclPacketDstIPDestination IP address of IPv4/IPv6 packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.8.4.14 |
hpnicfAclPacketProtocolThe protocol of IPv4/IPv6 packet. icmp(1), tcp(6), udp(17), igmp(2), gre(47), ospf(89), ipinip(4), icmp6(58), ipv6_ah(51), ipv6_esp(50)ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.4.15 |
hpnicfAclPacketDscpDSCP of IPv4/IPv6 packet.ro DSCPValue .1.3.6.1.4.1.11.2.14.11.15.2.8.4.16 |
hpnicfAclPacketFlowLabelFlow label value of IPv6 packet.ro Unsigned32 (0..1048575|4294967295) .1.3.6.1.4.1.11.2.14.11.15.2.8.4.17 |
hpnicfAclPacketIcmpIgmpTypeThe type of ICMP or IGMP packet.ro Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.4.18 |
hpnicfAclPacketIcmpIgmpCodeThe code of ICMP or IGMP packet.ro Integer32 (0..255|65535) .1.3.6.1.4.1.11.2.14.11.15.2.8.4.19 |
hpnicfAclPacketTcpFlagsThe flags of TCP packet. tcpack(1), tcpfin(2), tcppsh(3), tcprst(4), tcpsyn(5), tcpurg(6), invalid(255)ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.8.4.20 |
hpnicfAclPacketSrcPortSource port of TCP or UDP packet.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.4.21 |
hpnicfAclPacketDstPortDestination port of TCP or UDP packet.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.4.22 |
hpnicfAclPacketSrcMacAddrSource MAC address of Ethernet packet.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.4.23 |
hpnicfAclPacketDstMacAddrDestination MAC address of Ethernet packet.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.8.4.24 |
hpnicfAclPacketMacTypeLenThe Ethertype or 802.3 length of Ethernet packet.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.8.4.25 |
hpnicfAclPacketVlanPCP802.1p priority code point of Ethernet packet.ro Integer32 (0..7|255) .1.3.6.1.4.1.11.2.14.11.15.2.8.4.26 |
hpnicfAclPacketfilterTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.5 |
hpnicfPfilterTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.8.5.0 |
hpnicfMACfilterTrapThis notification is generated when a packet was processed by MAC address filter, but not every packet will generate one notification, the same notification only generate once in 30 seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.1 |
hpnicfAclRuleMatchCountThis notification is generated periodically due to a timer. The interval of the timer is configured in hpnicfAclIntervalTable. The notification details the entries about the packet-filter object, the matched ACL rule and the number of matching packets. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.2 |
hpnicfAclFirstIPv4PktCapturedThis notification is generated immediately when the first packet of the matched IPv4 flow is captured. Other packets of the matched flow won't be captured. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.3 |
hpnicfAclFirstIPv6PktCapturedThis notification is generated immediately when the first packet of the matched IPv6 flow is captured. Other packets of the matched flow won't be captured. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.4 |
hpnicfAclFirstEthernetPktCapturedThis notification is generated immediately when the first packet of the matched Ethernet flow is captured. Other packets of the matched flow won't be captured. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.5 |